Pasar al contenido principal

ESTABILIDAD DE MICRORREDES FORMADAS POR AGRUPACIONES DE CLUSTERS

PID2021-123633OB-C33

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 18
Encontrada(s) 1 página(s)

RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Positive-Mode-Damping Stability Criterion Application and Damping Solutions in Microgrid-Integrated Transmission Grids

  • Cartiel Arasa, Oriol
  • Horrillo Quintero, Pablo
  • Mesas García, Juan José
  • García Triviño, Pablo
  • Sarrias Mena, Raúl
  • Fernández Ramírez, Luis Miguel
  • Sainz Sapera, Luis
Stability problems are increasing in current power systems with a large number of electronic converters, such as microgrids (MGs) and microgrid clusters (MGCs). Frequencydomain methods, commonly used to analyse traditional power system stability, can also be extended to MGs. In particular, the positive-mode-damping (PMD) stability criterion is a simple and practical method to evaluate the stability of multi-terminal power electronicsbased systems, making it a powerful tool for addressing stability issues in MGCs. This paper extends the application of the PMD stability criterion to assess stability in MGCintegrated transmission grids. Moreover, it presents two bandpass filter-based active and passive damping compensators and examines their effectiveness in mitigating instabilities in MGCs. A modified IEEE three-bus power system integrating an MGC is used to conduct a small-signal harmonic stability study and apply active and passive damping solutions with the PMD stability criterion. The modified IEEE three-bus power system is implemented in real-time simulations using a hardware-in-the-loop setup with OPAL-RT4512 to validate the results obtained from MATLAB/Simulink R2022a simulations.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Review and improvements to the measurements of the VSC impedance transfer matrix

  • Pedra Durán, Joaquim|||0000-0003-2890-8160
  • Sainz Sapera, Luis|||0000-0002-5670-0669
  • Monjo Mur, Lluís|||0000-0001-6106-097X
© 2024 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Impedance/admittance transfer matrix characterization of voltage source converters is an important issue in frequency domain stability studies. Several approaches in the dq- and pn-frame are proposed to obtain this matrix with either experimental or numerical simulation measurements. Although these are well-established approaches, various issues require further study. The paper presents a detailed review and discussion on the dq- and pn-frame approaches for converter impedance/admittance transfer matrix measurements and contributes to clarifying the influence of the mirror frequency effect and the starting point of the FFT window on these measurements. Index The contributions are validated by PSCAD/EMTDC simulation with a VSC model containing PLL and outer controls., Objectius de Desenvolupament Sostenible::7 - Energia Assequible i No Contaminant, Objectius de Desenvolupament Sostenible::7 - Energia Assequible i No Contaminant::7.1 - Per a 2030, garantir l’accés universal a serveis d’energia assequibles, confiables i moderns, Objectius de Desenvolupament Sostenible::7 - Energia Assequible i No Contaminant::7.2 - Per a 2030, augmentar substancialment el percentatge d’energia renovable en el con­junt de fonts d’energia, Objectius de Desenvolupament Sostenible::7 - Energia Assequible i No Contaminant::7.a - Per a 2030, augmentar la cooperació internacional per tal de facilitar l’accés a la investigació i a les tecnolo­gies energètiques no contaminants, incloses les fonts d’energia renovables, l’eficiència energètica i les tecnologies de combustibles fòssils avançades i menys contaminants, i promoure la inversió en infraestructures energètiques i tecnologies d’energia no contaminant, Objectius de Desenvolupament Sostenible::7 - Energia Assequible i No Contaminant::7.b - Per a 2030, ampliar la infraestructura i millorar la tecnologia per tal d’oferir serveis d’energia moderns i sos­tenibles per a tots els països en desenvolupament, en particular els països menys avançats, els petits estats insulars en desenvolupament i els països en desenvolupament sense litoral, d’acord amb els programes de suport respectius
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Adaptive multi-objective real-time hierarchical control for isolated microgrid clusters utilizing an enhanced particle swarm optimization strategy to optimize costs and emissions

  • Horrillo Quintero, Pablo
  • García Triviño, Pablo
  • Carrasco González, David
  • Sarrias Mena, Raúl
  • Tostado Véliz, Marcos
  • Jurado Melguizo, Francisco
  • Sainz Sapera, Luis|||0000-0002-5670-0669
  • Fernández Ramírez, Luis M.
This paper introduces an adaptive hierarchical control for an isolated microgrid cluster (IMGC) leveraging a real-time multi-objective particle swarm optimization (MOPSO) algorithm. It simultaneously considers CO2 emissions minimization as a tertiary control objective and total losses minimization as a primary control objective, integrating grid-supporting and grid-feeding inverters for MG interconnection. The effectiveness of the MOPSO-based hierarchical control is demonstrated across multiple scenarios. Compared to a hierarchical control based on proportional power distribution relative to the rated inverter capacities of the MGs, the proposed method shows a 27.21% reduction in total losses and a 7.66% reduction in CO2 emissions. When compared with an optimization based on the fmincon solver, the proposed approach achieves a 22.92% reduction in losses and a 3.5% decrease in emissions. Additionally, centralized secondary control improves MRE indices by 100.09%, ITAE by 28.5%, ITSE by 43.78%, IAE by 30.61%, and ITSE by 47.72%, compared to the primary control strategy based on proportional approach. The MOPSO approach demonstrates robustness and flexibility, maintaining stable frequency and voltage within set thresholds during MG failures and sudden demand changes. Finally, the practical feasibility of the proposed approach is verified in a hardware-in-the-loop experimental setup using an OPAL-RT4512 unit and a dSPACE MicroLabBox. The experimental results, utilizing a time step of 50 µs, are consistent with the simulation outcomes, ensuring voltage and frequency control as its rated references., This work was partially supported by Ministerio de Ciencia e Innovación, Agencia Estatal de Investigación, FEDER, UE (Grants PID2021-123633OB-C31, PID2021-123633OB-C32 and PID2021- 123633OB-C33 supported by MCIN/AEI/10.13039/501100011033/ FEDER, UE)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A damping margin indicator for compensator design by the positive-mode-damping stability criterion

  • Cartiel Arasa, Oriol|||0009-0002-8229-0410
  • Sainz Sapera, Luis|||0000-0002-5670-0669
  • Mesas García, Juan José|||0000-0002-4014-4258
  • Monjo Mur, Lluís|||0000-0001-6106-097X
With the increasing presence of power electronics, stability issues in modern power systems are on the rise. The positive-mode-damping (PMD) stability criterion was recently introduced as a simple and practical method based on resonance mode analysis to assess stability in multi-terminal power electronics-based systems. This paper extends the PMD stability criterion by introducing the damping conductance margin (DCM), a novel damping margin indicator to measure the degree of stability in multi-terminal power electronics-based systems. Additionally, it presents two bandpass filter-based active and passive damping compensators to enhance stability and investigates their design using the DCM. Moreover, the modified modal sensitivity method is applied to determine the influence of compensators and VSCs on resonances and their potential interactions. The results are validated by MATLAB/Simulink simulations on the IEEE 3-, 5-, and 14- bus power systems., This work was supported by Ministerio de Ciencia e Innovación, Agencia Estatal de Investigación, FEDER, UE (Grant PID2021-123633OB-C33 supported by MCIN/AEI/10.13039/501100011033/ FEDER, UE)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

An innovative software for stability analysis of multi-energy grids

  • Cartiel Arasa, Oriol|||0009-0002-8229-0410
  • Sainz Sapera, Luis|||0000-0002-5670-0669
  • Mesas García, Juan José|||0000-0002-4014-4258
To effectively deal with the urgent climate crisis, clean resources and energy efficiency are becoming essential. As a result, renewable energy technologies (e.g., solar PV and wind power), HVDC links, and multi-energy systems have been widely integrated into traditional electrical power systems in recent decades. These technologies and HVDC links provide numerous benefits in driving the energy transition, and multi-energy systems are a promising energy storage/management solution to handle the variable and unpredictable nature of renewable energy technologies. However, despite the many benefits of the above new sustainable energy infrastructures, they also pose new technological challenges, such as small-signal stability problems due to poorly damped resonances caused by the interaction between power electronics and traditional grid elements. Current tools are not fully effective in studying these issues yet. Given this scenario, this paper presents an Innovative Software for Stability Analysis, a novel tool designed for small signal stability assessment in multi-energy grids. This software enables accurate stability predictions and provides actionable solutions to mitigate instabilities, regardless of system size. Its capabilities are demonstrated through comprehensive MATLAB/Simulink simulations on various systems, including a IEEE 3-bus test system, an AC/DC multi-energy grid with hydrogen vector, and a 70k-bus synthetic test system., This work was supported by Ministerio de Ciencia, Innovación y Universidades, Agencia Estatal de Investigación, FEDER, UE (Grant PID2021-123633OB-C33 supported by MICIU/AEI/10.13039/501100011033 / FEDER, UE)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A modular multilevel converter AC/DC small-signal admittance-based model for stability analysis of hybrid AC/DC grids

  • Cartiel Arasa, Oriol|||0009-0002-8229-0410
  • Beza, Mebtu
  • Sainz Sapera, Luis|||0000-0002-5670-0669
  • Bongiorno, Massimo
  • Mesas García, Juan José|||0000-0002-4014-4258
Modular Multilevel Converters (MMCs) have become a cornerstone technology for high-power applications such as High Voltage Direct Current transmission due to their scalability, low harmonic distortion, and high efficiency. However, their complex internal dynamics and multiple control loops introduce significant challenges in MMC modelling and stability analysis, particularly in multi-terminal hybrid AC/DC transmission grids. To address these challenges, this paper presents a novel frequency-domain MMC AC/DC small-signal admittance-based model that captures the dominant dynamic interactions between the AC and DC sides of the converter. Using dq-complex space vectors, the proposed model incorporates the MMC internal dynamics, circulating-current controller, phase-locked loop, inner current controller, and outer control loops, providing a detailed analytical representation of MMC behaviour. To address the inherently linear time-periodic (LTP) nature of MMC dynamics, the proposed formulation employs a structural reformulation in the dq-complex domain to obtain a compact linear time-invariant representation of the adopted LTP MMC model, without resorting to explicit harmonic expansions, multi-harmonic linearisation, or high-order harmonic state-space approximations. Analytical derivations of the MMC AC- and DC-side input admittances are also presented. The proposed AC/DC model enables frequency-domain stability analysis using approaches such as the Generalised Nyquist Criterion and the Positive-Mode-Damping stability criterion, while preserving the dominant AC/DC coupling structure required for converter-driven stability studies. Validation results and representative instability case studies using MATLAB/Simulink demonstrate the accuracy and robustness of the proposed model, highlighting the importance of simultaneously considering AC and DC dynamics in converter-dominated AC/DC systems., This work was supported by Ministerio de Ciencia, Innovación y Universidades, Agencia Estatal de Investigación, FEDER, UE (Grant PID2021-123633OB-C33 supported by MICIU/AEI/10.13039/ 501100011033 / FEDER, UE)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Multi-power carriers-based integrated control for series-cascaded microgrid

  • Ali, Salman|||0000-0002-7278-4743
  • Bogarra Rodríguez, Santiago|||0000-0002-2006-1156
  • Khan, Muhammad Mansoor
  • Córcoles López, Felipe|||0000-0002-9279-069X
Series-cascaded microgrids (SCMGs) indeed provide control flexibility and high-voltage synthesis capabilities. However, the power distribution in SCMGs based on distributed generation (DG) sources stays understudied. This paper proposes an SCMG topology using non-dispatchable DG sources and battery energy storage, with an integrated power-routing control. The objective is to address power distribution limitations and stabilize SCMG output voltages under varying conditions. A case study validates the control methodology, considering zero irradiation levels for photovoltaic (PV) and maximum power sharing. The battery modules play a crucial role by providing power, voltage support, and maintaining capacitor voltage at a reference value of a PVintegrated module. This is achieved through a third harmonic current injection in the fundamental frequency current, coupled with proportional power distribution using a third harmonic power signal. The effectiveness of the proposed SCMG topology and control is demonstrated through MATLAB/Simulink and hardware-in-loop analyses (Typhoon HIL). The results present an extended power distribution between series-cascaded DG sources-based units while ensuring stable SCMG output voltages, even in adverse conditions like PV module intermittency. Future work aims to extend the proposed topology to a ring/delta-connection SCMG, where third harmonic current aids power distribution among SCMG legs and between series-cascaded DG sources-based units., This work was supported by the Ministerio de Ciencia e Innovación under Grant PID2021-123633OB-C33., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

An innovative software for stability analysis of multi-energy grids

  • Cartiel Arasa, Oriol|||0009-0002-8229-0410
  • Sainz Sapera, Luis|||0000-0002-5670-0669
  • Mesas García, Juan José|||0000-0002-4014-4258
To effectively deal with the urgent climate crisis,clean resources and energy efficiency are becoming essential. As a result, renewable energy technologies (e.g., solar PV and wind power), HVDC links, and multi-energy systems have been widely integrated into traditional electrical power systems in recent decades. These technologies and HVDC links provide numerous benefits in driving the energy transition, and multi-energy systems are a promising energy storage/management solution to handle the variable and unpredictable nature of renewable energy technologies. However, despite the many benefits of the above new sustainable energy infrastructures, they also pose new technological challenges, such as small-signal stability problems due to poorly damped resonances caused by the interaction between power electronics and traditional grid elements. Current tools are not fully effective in studying these issues yet. Given this scenario, this paper presents an Innovative Software for Stability Analysis, a novel tool designed for small-signal stability assessment in multi-energy grids. This software enables accurate stability predictions and provides actionable solutions to mitigate instabilities, regardless of system size. Its capabilities are demonstrated through comprehensive MATLAB/Simulink simulations on various systems, including a IEEE 3-bus test system, an AC/DC multi-energy grid with hydrogen vector, and a 70k-bus synthetic test system.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Impact of short-circuit ratio on control parameter settings of DFIG wind turbines

  • Pedra Durán, Joaquim|||0000-0003-2890-8160
  • Sainz Sapera, Luis|||0000-0002-5670-0669
  • Monjo Mur, Lluís|||0000-0001-6106-097X
This work deals with doubly fed induction generator (DFIG) modeling and stability when connected to weak AC grids. A detailed state-space model that includes the phase-locked loop (PLL) is developed. This work aims to determine the influence of the network’s strength on DFIG stability through the short-circuit ratio (SCR). The critical values of the proportional control parameters of the grid-side and rotor-side converters (RSC and GSC), as well as PLL, which make the system unstable, are calculated for different SCR values. Finally, PSCAD/EMTDC dynamic simulations are used to validate the critical control parameters obtained by studying the eigenvalues of the DFIG state-space model regarding system stability., Objectius de Desenvolupament Sostenible::7 - Energia Assequible i No Contaminant, Objectius de Desenvolupament Sostenible::7 - Energia Assequible i No Contaminant::7.1 - Per a 2030, garantir l’accés universal a serveis d’energia assequibles, confiables i moderns, Objectius de Desenvolupament Sostenible::7 - Energia Assequible i No Contaminant::7.2 - Per a 2030, augmentar substancialment el percentatge d’energia renovable en el con­junt de fonts d’energia, Objectius de Desenvolupament Sostenible::7 - Energia Assequible i No Contaminant::7.b - Per a 2030, ampliar la infraestructura i millorar la tecnologia per tal d’oferir serveis d’energia moderns i sos­tenibles per a tots els països en desenvolupament, en particular els països menys avançats, els petits estats insulars en desenvolupament i els països en desenvolupament sense litoral, d’acord amb els programes de suport respectius
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

An innovative software for stability analysis of multi-energy grids

  • Cartiel Arasa, Oriol
  • Sainz Sapera, Luis
  • Mesas García, Juan José
To effectively deal with the urgent climate crisis, clean resources and energy efficiency are becoming essential. As a result, renewable energy technologies (e.g., solar PV and wind power), HVDC links, and multi-energy systems have been widely integrated into traditional electrical power systems in recent decades. These technologies and HVDC links provide numerous benefits in driving the energy transition, and multi-energy systems are a promising energy storage/management solution to handle the variable and unpredictable nature of renewable energy technologies. However, despite the many benefits of the above new sustainable energy infrastructures, they also pose new technological challenges, such as small-signal stability problems due to poorly damped resonances caused by the interaction between power electronics and traditional grid elements. Current tools are not fully effective in studying these issues yet. Given this scenario, this paper presents an Innovative Software for Stability Analysis, a novel tool designed for small signal stability assessment in multi-energy grids. This software enables accurate stability predictions and provides actionable solutions to mitigate instabilities, regardless of system size. Its capabilities are demonstrated through comprehensive MATLAB/Simulink simulations on various systems, including a IEEE 3-bus test system, an AC/DC multi-energy grid with hydrogen vector, and a 70k-bus synthetic test system., This work was supported by Ministerio de Ciencia, Innovación y Universidades, Agencia Estatal de Investigación, FEDER, UE (Grant PID2021-123633OB-C33 supported by MICIU/AEI/10.13039/501100011033 / FEDER, UE)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A damping margin indicator for compensator design by the positive-mode-damping stability criterion

  • Cartiel Arasa, Oriol
  • Sainz Sapera, Luis
  • Mesas García, Juan José
  • Monjo Mur, Lluís
With the increasing presence of power electronics, stability issues in modern power systems are on the rise. The positive-mode-damping (PMD) stability criterion was recently introduced as a simple and practical method based on resonance mode analysis to assess stability in multi-terminal power electronics-based systems. This paper extends the PMD stability criterion by introducing the damping conductance margin (DCM), a novel damping margin indicator to measure the degree of stability in multi-terminal power electronics-based systems. Additionally, it presents two bandpass filter-based active and passive damping compensators to enhance stability and investigates their design using the DCM. Moreover, the modified modal sensitivity method is applied to determine the influence of compensators and VSCs on resonances and their potential interactions. The results are validated by MATLAB/Simulink simulations on the IEEE 3-, 5-, and 14- bus power systems., This work was supported by Ministerio de Ciencia e Innovación, Agencia Estatal de Investigación, FEDER, UE (Grant PID2021-123633OB-C33 supported by MCIN/AEI/10.13039/501100011033/ FEDER, UE)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Multi-power carriers-based integrated control for series-cascaded microgrid

  • Ali, Salman
  • Bogarra Rodríguez, Santiago
  • Khan, Muhammad Mansoor
  • Córcoles López, Felipe
Series-cascaded microgrids (SCMGs) indeed provide control flexibility and high-voltage synthesis capabilities. However, the power distribution in SCMGs based on distributed generation (DG) sources stays understudied. This paper proposes an SCMG topology using non-dispatchable DG sources and battery energy storage, with an integrated power-routing control. The objective is to address power distribution limitations and stabilize SCMG output voltages under varying conditions. A case study validates the control methodology, considering zero irradiation levels for photovoltaic (PV) and maximum power sharing. The battery modules play a crucial role by providing power, voltage support, and maintaining capacitor voltage at a reference value of a PVintegrated module. This is achieved through a third harmonic current injection in the fundamental frequency current, coupled with proportional power distribution using a third harmonic power signal. The effectiveness of the proposed SCMG topology and control is demonstrated through MATLAB/Simulink and hardware-in-loop analyses (Typhoon HIL). The results present an extended power distribution between series-cascaded DG sources-based units while ensuring stable SCMG output voltages, even in adverse conditions like PV module intermittency. Future work aims to extend the proposed topology to a ring/delta-connection SCMG, where third harmonic current aids power distribution among SCMG legs and between series-cascaded DG sources-based units., This work was supported by the Ministerio de Ciencia e Innovación under Grant PID2021-123633OB-C33., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Impact of short-circuit ratio on control parameter settings of DFIG wind turbines

  • Pedra Durán, Joaquim
  • Sainz Sapera, Luis
  • Monjo Mur, Lluís
This work deals with doubly fed induction generator (DFIG) modeling and stability when connected to weak AC grids. A detailed state-space model that includes the phase-locked loop (PLL) is developed. This work aims to determine the influence of the network’s strength on DFIG stability through the short-circuit ratio (SCR). The critical values of the proportional control parameters of the grid-side and rotor-side converters (RSC and GSC), as well as PLL, which make the system unstable, are calculated for different SCR values. Finally, PSCAD/EMTDC dynamic simulations are used to validate the critical control parameters obtained by studying the eigenvalues of the DFIG state-space model regarding system stability., Objectius de Desenvolupament Sostenible::7 - Energia Assequible i No Contaminant, Objectius de Desenvolupament Sostenible::7 - Energia Assequible i No Contaminant::7.1 - Per a 2030, garantir l’accés universal a serveis d’energia assequibles, confiables i moderns, Objectius de Desenvolupament Sostenible::7 - Energia Assequible i No Contaminant::7.2 - Per a 2030, augmentar substancialment el percentatge d’energia renovable en el con­junt de fonts d’energia, Objectius de Desenvolupament Sostenible::7 - Energia Assequible i No Contaminant::7.b - Per a 2030, ampliar la infraestructura i millorar la tecnologia per tal d’oferir serveis d’energia moderns i sos­tenibles per a tots els països en desenvolupament, en particular els països menys avançats, els petits estats insulars en desenvolupament i els països en desenvolupament sense litoral, d’acord amb els programes de suport respectius, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Adaptive multi-objective real-time hierarchical control for isolated microgrid clusters utilizing an enhanced particle swarm optimization strategy to optimize costs and emissions

  • Horrillo Quintero, Pablo
  • García Triviño, Pablo
  • Carrasco González, David
  • Sarrias Mena, Raúl
  • Tostado Véliz, Marcos
  • Jurado Melguizo, Francisco
  • Sainz Sapera, Luis
  • Fernández Ramírez, Luis M.
This paper introduces an adaptive hierarchical control for an isolated microgrid cluster (IMGC) leveraging a real-time multi-objective particle swarm optimization (MOPSO) algorithm. It simultaneously considers CO2 emissions minimization as a tertiary control objective and total losses minimization as a primary control objective, integrating grid-supporting and grid-feeding inverters for MG interconnection. The effectiveness of the MOPSO-based hierarchical control is demonstrated across multiple scenarios. Compared to a hierarchical control based on proportional power distribution relative to the rated inverter capacities of the MGs, the proposed method shows a 27.21% reduction in total losses and a 7.66% reduction in CO2 emissions. When compared with an optimization based on the fmincon solver, the proposed approach achieves a 22.92% reduction in losses and a 3.5% decrease in emissions. Additionally, centralized secondary control improves MRE indices by 100.09%, ITAE by 28.5%, ITSE by 43.78%, IAE by 30.61%, and ITSE by 47.72%, compared to the primary control strategy based on proportional approach. The MOPSO approach demonstrates robustness and flexibility, maintaining stable frequency and voltage within set thresholds during MG failures and sudden demand changes. Finally, the practical feasibility of the proposed approach is verified in a hardware-in-the-loop experimental setup using an OPAL-RT4512 unit and a dSPACE MicroLabBox. The experimental results, utilizing a time step of 50 µs, are consistent with the simulation outcomes, ensuring voltage and frequency control as its rated references., This work was partially supported by Ministerio de Ciencia e Innovación, Agencia Estatal de Investigación, FEDER, UE (Grants PID2021-123633OB-C31, PID2021-123633OB-C32 and PID2021- 123633OB-C33 supported by MCIN/AEI/10.13039/501100011033/ FEDER, UE)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Model of quasi-Z-source inverter-based PV power systems for stability studies of multi-terminal AC grid-connected PV power systems

  • Monjo Mur, Lluís
  • Sainz Sapera, Luis
  • Pedra Durán, Joaquim
Photovoltaic (PV) power systems are becoming one of the most popular green power systems. Power converters are used in these systems. Among them, quasi-Z-source inverters (qZSIs) are currently on the rise. However, instabilities can appear in multi-terminal AC grid-connected power electronics, such as PV power systems, due to the interaction between power electronic controls and the grid. Modeling of qZSI-based PV power systems is lacking in the literature and stability assessment of grid-connected qZSI-based PV power systems is not yet well understood. Accordingly, the present paper contributes with an s-domain dq-real admittance transfer matrix model of qZSI-based PV power systems derived from their small-signal state-space averaged model. The paper also describes a systematic procedure to study multi-terminal AC grid-connected qZSI-based PV power systems by the nodal admittance method, where the proposed qZSI-based PV power system model is incorporated into the nodal admittance matrix to study stability concerns. Thus, AC grid dynamics in the presence of qZSI-based PV power systems can be investigated using impedance-based stability criteria. The proposed model and the procedure are applied in a stability study of two applications where solutions for improving stability issues are presented. In these applications, the two main causes of instabilities in AC-grid connected PV-qZ systems are analyzed in detail. The study is validated by PSCAD/EMTDC simulation., This work was supported in part by the Ministerio de Ciencia, Innovación [grant number PID2021-123633OB-C33]., Peer Reviewed, Objectius de Desenvolupament Sostenible::7 - Energia Assequible i No Contaminant::7.1 - Per a 2030, garantir l’accés universal a serveis d’energia assequibles, confiables i moderns, Objectius de Desenvolupament Sostenible::7 - Energia Assequible i No Contaminant::7.2 - Per a 2030, augmentar substancialment el percentatge d’energia renovable en el con­junt de fonts d’energia, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Objectius de Desenvolupament Sostenible::7 - Energia Assequible i No Contaminant, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura::9.a - Facilitar el desenvolupament d’infraestructures sostenibles i resilients als països en desenvolupament per mitjà de més suport financer, tecnològic i tècnic als països africans, països menys avançats, països en desenvolu­pament sense litoral i petits estats insulars en desenvolupament, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

An innovative software for stability analysis of multi-energy grids

  • Cartiel Arasa, Oriol
  • Sainz Sapera, Luis
  • Mesas García, Juan José
To effectively deal with the urgent climate crisis,clean resources and energy efficiency are becoming essential. As a result, renewable energy technologies (e.g., solar PV and wind power), HVDC links, and multi-energy systems have been widely integrated into traditional electrical power systems in recent decades. These technologies and HVDC links provide numerous benefits in driving the energy transition, and multi-energy systems are a promising energy storage/management solution to handle the variable and unpredictable nature of renewable energy technologies. However, despite the many benefits of the above new sustainable energy infrastructures, they also pose new technological challenges, such as small-signal stability problems due to poorly damped resonances caused by the interaction between power electronics and traditional grid elements. Current tools are not fully effective in studying these issues yet. Given this scenario, this paper presents an Innovative Software for Stability Analysis, a novel tool designed for small-signal stability assessment in multi-energy grids. This software enables accurate stability predictions and provides actionable solutions to mitigate instabilities, regardless of system size. Its capabilities are demonstrated through comprehensive MATLAB/Simulink simulations on various systems, including a IEEE 3-bus test system, an AC/DC multi-energy grid with hydrogen vector, and a 70k-bus synthetic test system., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Review and improvements to the measurements of the VSC impedance transfer matrix

  • Pedra Durán, Joaquim
  • Sainz Sapera, Luis
  • Monjo Mur, Lluís
© 2024 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Impedance/admittance transfer matrix characterization of voltage source converters is an important issue in frequency domain stability studies. Several approaches in the dq- and pn-frame are proposed to obtain this matrix with either experimental or numerical simulation measurements. Although these are well-established approaches, various issues require further study. The paper presents a detailed review and discussion on the dq- and pn-frame approaches for converter impedance/admittance transfer matrix measurements and contributes to clarifying the influence of the mirror frequency effect and the starting point of the FFT window on these measurements. Index The contributions are validated by PSCAD/EMTDC simulation with a VSC model containing PLL and outer controls., Objectius de Desenvolupament Sostenible::7 - Energia Assequible i No Contaminant, Objectius de Desenvolupament Sostenible::7 - Energia Assequible i No Contaminant::7.1 - Per a 2030, garantir l’accés universal a serveis d’energia assequibles, confiables i moderns, Objectius de Desenvolupament Sostenible::7 - Energia Assequible i No Contaminant::7.2 - Per a 2030, augmentar substancialment el percentatge d’energia renovable en el con­junt de fonts d’energia, Objectius de Desenvolupament Sostenible::7 - Energia Assequible i No Contaminant::7.a - Per a 2030, augmentar la cooperació internacional per tal de facilitar l’accés a la investigació i a les tecnolo­gies energètiques no contaminants, incloses les fonts d’energia renovables, l’eficiència energètica i les tecnologies de combustibles fòssils avançades i menys contaminants, i promoure la inversió en infraestructures energètiques i tecnologies d’energia no contaminant, Objectius de Desenvolupament Sostenible::7 - Energia Assequible i No Contaminant::7.b - Per a 2030, ampliar la infraestructura i millorar la tecnologia per tal d’oferir serveis d’energia moderns i sos­tenibles per a tots els països en desenvolupament, en particular els països menys avançats, els petits estats insulars en desenvolupament i els països en desenvolupament sense litoral, d’acord amb els programes de suport respectius, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

New smart sensor for voltage unbalance measurements in electrical power systems

  • Bogarra Rodríguez, Santiago
  • Saura Perisé, Jaime
  • Rolán Blanco, Alejandro
This paper deals with voltage unbalances and how they can be quantified according to the standards. Firstly, a comparison between the different unbalance voltage factors is conducted in order to remark on their divergences. Secondly, according to the standard that better represents the phenomenon, i.e., EN 50160, a new methodology is proposed to quantify the voltage unbalance factor (VUF). In order to do so, it is recommended to measure the voltage unbalance in three-phase installations by means of a new smart sensor based on a single voltage sensor, which measures the direct-current (DC) voltage at the output of a three-phase diode bridge rectifier, while current methods make use of three voltage sensors (which can measure either phase-to-neutral voltages or phase-to-phase voltages). Furthermore, both simulation and experimental results have been carried out to validate the proposed methodology. Finally, a new voltage unbalance factor (and the corresponding methodology to obtain it from the measured DC voltage) is proposed., This research was funded by the Spanish Ministry of Science and Innovation, grant number PID2021-123633OB-C33., Peer Reviewed, Postprint (published version)