Pasar al contenido principal

GEMELO DIGITAL DE VEHICULO ELECTRICO INCLUYENDO UN MODELO DE ESTADO DE SALUD DE LA BATERIA (CLEAN-BREATHE)

PID2021-124696OB-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Integrated Experimental and Simulation Analysis of Thermal Runaway Propagation in NMC811 Lithium-Ion Battery Modules

  • Guaraco-Figueira, Carlos Rafael
[ES] La creciente demanda de baterías de iones de litio de alta energía en vehículos eléctricos y sistemas de almacenamiento de energía ha aumentado la preocupación por su seguridad, en particular el riesgo de ignición y propagación del fuego en módulos de baterías. Esta tesis aborda la necesidad de un marco de modelado predictivo y validado experimentalmente capaz de evaluar el comportamiento de fallo térmico en módulos compuestos por celdas cilíndricas NMC811. El objetivo principal es integrar el modelado del rendimiento electroquímico con la dinámica de ignición y transferencia de calor para comprender mejor cómo se inician y propagan los fallos en los sistemas de baterías. Se desarrolló un marco multifísico completo combinando un modelo electroquímico pseudo-biodimensional (P2D) calibrado con un modelo cinético de combustión junto a un modelo nodal para simular la transferencia de calor a nivel de módulo. Este marco se construyó y validó mediante una amplia campaña experimental que incluía ciclos eléctricos, Calorimetría de Tasa Acelerada (ARC) y pruebas de propagación térmica. Los resultados intermedios revelaron la gran influencia de las altas tasas de C-rate en la generación de calor, lo que pone de relieve los retos térmicos en condiciones de funcionamiento exigentes. También se caracterizó en detalle el comportamiento de fuga térmica, con emisiones medidas de gases y partículas que mostraban altas concentraciones de CO, CO¿ e hidrógeno, demostrando la intensidad y los peligros asociados a los fallos. El modelo integrado final reprodujo con éxito la progresión y el momento de los eventos térmicos en un módulo cilíndrico de 15 celdas, teniendo en cuenta factores de diseño como el espaciado entre celdas y las propiedades térmicas entre celdas. Esta herramienta de simulación permite una evaluación avanzada de la seguridad, apoya el desarrollo de diseños de módulos de baterías más seguros y ofrece una base escalable para evaluar sistemas más grandes en escenarios críticos., [CA] La creixent demanda de bateries d'ions de liti d'alta energia en vehicles elèctrics i sistemes d'emmagatzematge d'energia ha augmentat la preocupació per la seua seguretat, en particular el risc d'ignició i propagació del foc en mòduls de bateries. Esta tesi aborda la necessitat d'un marc de modelatge predictiu i validat experimentalment capaç d'avaluar el comportament de fallada tèrmica en mòduls compostos per cel·les cilíndriques NMC811. L'objectiu principal és integrar el modelatge del rendiment electroquímic amb la dinàmica d'ignició i transferència de calor per a comprendre millor com s'inicien i propaguen les fallades en els sistemes de bateries. Es va desenrotllar un marc multifísic complet combinant un model electroquímic pseudo-biodimensional (P2D) calibrat amb un model cinètic de combustió al costat d'un model nodal per a simular la transferència de calor a nivell de mòdul. Este marc es va construir i va validar mitjançant una àmplia campanya experimental que incloïa cicles elèctrics, Calorimetria de Taxa Accelerada (ARC) i proves de propagació tèrmica. Els resultats intermedis van revelar la gran influència de les altes taxes de C-rate en la generació de calor, la qual cosa posa en relleu els reptes tèrmics en condicions de funcionament exigents. També es va caracteritzar detalladament el comportament de fugida tèrmica, amb emissions mesurades de gasos i partícules que mostraven altes concentracions de CO, CO¿ i hidrogen, demostrant la intensitat i els perills associats a les fallades. El model integrat final va reproduir amb èxit la progressió i el moment dels esdeveniments tèrmics en un mòdul cilíndric de 15 cel·les, tenint en compte factors de disseny com l'espaiat entre cel·les i les propietats tèrmiques entre cel·les. Esta ferramenta de simulació permet una avaluació avançada de la seguretat, dona suport al desenrotllament de dissenys de mòduls de bateries més segurs i oferix una base escalable per a avaluar sistemes més grans en escenaris crítics., [EN] The growing demand for high-energy lithium-ion batteries in electric vehicles and energy storage systems has increase the concerns regarding their safety, particularly the risk of thermal runaway and fire propagation in battery modules. This thesis addresses the need for a predictive and experimentally validated modeling framework capable of assessing thermal failure behavior in modules composed of NMC811 cylindrical cells. The primary objective is to integrate electrochemical performance modeling with thermal runaway dynamics to better understand how failure initiates and propagates within battery systems. A comprehensive multiphysics framework was developed by combining a calibrated pseudo-two-dimensional (P2D) electrochemical model with a thermal runaway kinetics model and a lumped thermal network to simulate heat transfer at the module level. This framework was built and validated through an extensive experimental campaign that included electrical cycling, Accelerating Rate Calorimetry (ARC), and thermal propagation tests. The intermediate results revealed the strong influence of high C-rates on heat generation, highlighting the thermal challenges during demanding operating conditions. Thermal runaway behavior was also characterized in detail, with measured gas and particle emissions showing high concentrations of CO, CO¿, and hydrogen, demonstrating the intensity and hazards associated with failure events. The final integrated model successfully reproduced the progression and timing of thermal events in a 15-cell cylindrical module, accounting for design factors such as cell spacing and inter-cell thermal properties. This simulation tool enables advanced safety assessment, supports the development of safer battery module designs, and offers a scalable foundation for evaluating larger systems under critical scenarios., This work was supported by the European Union's “NextGenerationEU”/PRTR initiative and by project PID2021-124696OB-C21, funded by the Ministerio de Ciencia e Innovación, the Agencia Estatal de Investigación, and FEDER MCIN/AEI/10.13039/501100011033/FEDER,UE) and the grant PRE2022-103766, funded by MCIN/AEI/10.13039/501100011033 and ESF+.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental measurement and modeling of the internal pressure in cylindrical lithium-ion battery cells under abuse conditions

  • García Martínez, Antonio|||0000-0001-5783-4936
  • Monsalve-Serrano, Javier|||0000-0001-8593-095X
  • Marco-Gimeno, Javier|||0000-0002-4815-3714
  • Juan Manuel
[EN] The internal pressure evolution of cylindrical lithium-ion battery cells under abuse tests is evaluated in this work. The pressure evolution is recorded through a cavity at the center of the inner structure of the cylindrical cell. Understanding pressure buildup due to exothermic reactions aids in designing safety features, such as improved venting mechanisms. The pressure activation for the safety mechanism depends on both the venting cap design and the different abuse test conditions. This study focuses on two important parameters: the state of charge (SOC) and the overheating ramp. The SOC significantly influences the venting pressure activation at the overheating abuse tests. The 18650 cell exhibits a similar venting behavior as the 21700 cell, with pressure safety mechanisms activating sooner for the 18650 cell. The geometric structure of the battery and safety mechanisms significantly influence vent-activation thresholds. After the Current Interruptor Device (CID) breakdown, pressure rises exponentially until venting occurs, due to gas generation from the decomposition of internal components and electrolyte vaporization. With the experimental data for the overheating abuse test, a model that predicts the evolution of the pressure has been developed. For the overcharging abuse test, the pressure evolution has been measured with different current rates (C-rates) to simulate overcharge with standard charging current and fast charging current. However, the internal pressure inside the cell activates the current interrupt device, which avoids overcharging the cell, thus preventing the thermal runaway (TR) from occurring., This research is part of the projects TED2021-132220B-C21 and TED2021-130488A-I00, funded by the MCIN/AEI/10.130 39/501100011033 and the European Union "NextGenerationEU"/PRTR, and PID2021-124696OB-C21, funded by Ministerio de Ciencia e Innovacion, Agencia Estatal de Investigacion and FEDER (MCIN/AEI/1 0.13039/501100011033/FEDER,UE) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Detailed characterisation of particle emissions from the thermal runaway of nickel-manganese-cobalt 811 lithium-ion batteries at different states of charge

  • García Martínez, Antonio|||0000-0001-5783-4936
  • Monsalve-Serrano, Javier|||0000-0001-8593-095X
  • Micó, Carlos|||0000-0001-5787-6212
  • Guaraco-Figueira, Carlos Rafael
[EN] Lithium -ion batteries are essential in transforming the energy sector. However, pursuing higher energy density and using flammable chemistries increase the risk of thermal runaway, a significant safety concern. To address this issue, this study utilises analytical techniques, including field emission scanning electron microscopy, inductively coupled plasma mass spectrometry, thermogravimetric analysis, and differential scanning calorimetry, to comprehensively characterise solid particle emissions from thermal abused batteries. The results highlighted that fully charged cells exhibit a more intense thermal runaway, evidenced by higher maximum temperatures and significant solid particle emissions, with a notable portion smaller than 1 mm. A detailed morphological examination revealed that at 100 % SoC, particles predominantly consist of carbon -coated metal cores, influencing their thermal oxidation characteristics. Conversely, particles from less charged cells (50 % and 75 % SoC) demonstrated a leaner combustion profile, marked by decreased carbon content and reduced thermal oxidation capacity. The research conclusively delineates the complex interplay between SoC, thermal runaway dynamics, and resultant particle emissions, emphasizing the critical need for integrated safety strategies in lithium -ion battery management and design. In conclusion, the study offers a comprehensive analysis of the repercussions of thermal runaway in lithium -ion batteries, with a special focus on NMC811 cylindrical cells. It enriches the understanding of how different charging levels affect the risk profiles of these batteries., This research is part of the projects TED2021-132220B-C21 and TED2021-130488A-I00, funded by the MCIN/AEI/10.130 39/501100011033 and the European Union "NextGenerationEU"/PRTR, and PID2021-124696OB-C21, funded by Ministerio de Ciencia e Innovacion, Agencia Estatal de Investigacion and FEDER (MCIN/AEI/1 0.13039/501100011033/FEDER,UE). The publication is part of grant PRE2022-103766, funded by MCIN/AEI/10.13039/501100011033 and ESF + .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Comparative CT scan and U-net segmentation analysis of NMC811 batteries after thermal runaway triggered by various abuse methods and states of charge

  • García Martínez, Antonio|||0000-0001-5783-4936
  • Monsalve-Serrano, Javier|||0000-0001-8593-095X
  • Marco-Gimeno, Javier|||0000-0002-4815-3714
  • Guaraco-Figueira, Carlos Rafael
[EN] As lithium-ion batteries become more prevalent in energy storage, understanding thermal runaway phenomena and characterization methods has gained scientific importance. This study assesses the impact of the State of Charge (SoC) on the internal morphology of lithium-ion batteries after thermal runaway, induced by three methodologies: Heat, Wait, and Seek (thermal abuse), Nail Penetration (mechanical abuse), and Laser Irradiation. The behaviour of 18650 NMC811 cylindrical cells was evaluated using these methods. Post-abuse, the internal morphology was analysed via CT scanning with an X-ray microscope, highlighting deformed areas to reconstruct a three-dimensional model of the cells. The scans were segmented using the U-Net protocol to identify remaining components inside the casings. Results show that cells with lower SoC retain more active material after thermal runaway due to less severe reactions, resulting in less internal collapse compared to fully charged cells. Higher SoC cells exhibited blockages in the venting cap from collapsed materials and metal foils. Among the methodologies, Nail Penetration left the least residual active material and metal foils, while Laser Irradiation caused the least material removal and structural deformation. This study provides new insights into the thermal runaway phenomena under varying states of charge and abuse methodologies., This research is part of the projects TED2021-132220B-C21 and TED2021-130488A-I00, funded by the MCIN/AEI/10.13039/ 501100011033 and the European Union NextGenerationEU /PRTR, and PID2021-124696OB-C21, funded by Ministerio de Ciencia e Innovacion, Agencia Estatal de Investigacion and FEDER (MCIN/AEI/10.13039/501100011033/FEDER,UE). The publication is part of grant PRE2022-103766, funded by MCIN/AEI/10.13039/501100011033 and ESF+.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Cell-to-cell dispersion impact on zero-dimensional models for predicting thermal runaway parameters of NCA and NMC811

  • García Martínez, Antonio|||0000-0001-5783-4936
  • Pastor, José V.|||0000-0003-4113-4681
  • Monsalve-Serrano, Javier|||0000-0001-8593-095X
  • Golke, Diego
[EN] The battery electric vehicle is the leading technology for reducing greenhouse gas emissions using clean and renewable energy. However, concerns due to battery thermal runaway are becoming more severe as the battery energy density increases. Fast-calculation models capable of predicting the heat released during the thermal runaway phenomenon can help to develop safety mechanisms according to the battery chemistry. The current study assesses the battery thermal runaway variability for two different battery chemistries, nickel cobalt aluminium oxides and nickel manganese cobalt oxides, for 3 different states of charge (100%, 80% and 50%), two different battery sizes (18,650 and 21,700), and two different battery health (pristine and aged). The tests are performed in the accelerating rate calorimeter using the heat-wait-seek protocol and repeated 5 times (each battery condition) for statistical analysis of the main thermal runaway parameters. A model using the Arrhenius equation was developed, calibrated, and validated. The model was developed considering 5 steps during temperature evolution to the reliable prediction of thermal runaway characteristics, considering inputs as states of charge, capacity fade (solid electrolyte interface growth), energy density, battery end mass and initial voltage. The experimental tests show that temperature rise rate, when the exothermic is detected, and battery end mass play an important role in the self-heating duration and maximum temperature, respectively, which are key parameters to understanding scattering behaviour. Considering these effects during modelling, the model can forecast the primary features of a thermal runaway, including maximum temperature, onset temperature, and duration of the whole battery thermal runaway process, all within the average difference of no more than 3%. For this reason, the model proposed seems to be a suitable tool for battery safety mechanism design as it considers the state of charge, energy density and ageing effects., The authors acknowledge the Vicerrectorado de investigacion de la Universitat Politecnica de Valencia for supporting this research through Programa de Ayudas de Investigacion y desarrollo (PAID-01-22). This research is part of the projects TED2021-132220B-C21 and TED2021-130488 A-I00, funded by the MCIN/AEI/10.13039/501100011033 and the European Union "NextGenerationEU"/PRTR. This research is part of the project PID2021-124696OB-C21, funded by Ministerio de Ciencia e Innovacion, Agencia Estatal de Investigacion and FEDER (MCIN/AEI/1 0.13039/501100011033/FEDER, UE).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A tabulation method of Li-ion Thermal Runaway mechanisms for the acceleration of high dimensional simulations

  • García Martínez, Antonio|||0000-0001-5783-4936
  • Micó, Carlos|||0000-0001-5787-6212
  • Marco-Gimeno, Javier|||0000-0002-4815-3714
  • Bernal, Andrés
[EN] High-Fidelity numerical simulations of the Thermal Runaway (TR) phenomenon on lithium-ion batteries (LIB) depict stiff system of equations that need to be solved with extremely low time-steps to ensure numerical stability. In the present study, a methodology is presented to improve computational times and convergence of three-dimensional studies. A tabulation approach of the developed chemical kinetics models on the literature is presented to avoid the resolution of the set of Ordinary Differential Equations (ODE) that define the self-heating behavior of LIB under thermal degradation conditions. The desired tables have been obtained through 0-dimensional models for three different cathode materials ( LiCoO 2 , NMC111 and NCA) and the TR mechanism have been replicated with the tabulation method firstly through the 0-dimensional approach and then translated to a 3-dimensional model to ensure its functionality and assess the minimum time-step needed for performing TR simulations. The results through the tabulation method replicate almost exactly the onset temperature for the three cathode chemistry both 0-dimensonally and 3-dimensionally. Additionally, a significant speed up is reported for TR propagation studies performed, allowing time-steps three orders of magnitude larger than through traditional methods while ensuring numerical stability., This research is part of the projects TED2021-132220B-C21 and TED2021-130488AI00, funded by the MCIN/AEI/10.13039/501100011033 and the European Union "NextGenerationEU"/PRTR, and PID2021-124696OB-C21, funded by Ministerio de Ciencia e Innovacion, Agencia Estatal de Investigacion and FEDER (MCIN/AEI/10.13039/5011000110 33/FEDER,UE) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Characterization of pristine and aged NMC lithium-ion battery thermal runaway using ARC experiments coupled with optical techniques

  • García Martínez, Antonio|||0000-0001-5783-4936
  • Monsalve-Serrano, Javier|||0000-0001-8593-095X
  • Golke, Diego
  • De Vargas Lewiski, Felipe
[EN] Battery thermal runaway (TR) challenges battery applications due to safety considerations, potentially endangering consumers. Understanding the process is crucial to defining first alarm strategies that indicate the risk of TR and designing systems to mitigate this problem. For this reason, the present paper aims to characterise key variables of the venting and thermal runaway processes. Experimental tests were conducted in an accelerating rate calorimeter (ARC) using the heat wait seek (HWS) protocol, which tracks the battery temperature after detecting an exothermic reaction during the seek period. The maximum temperature rise rate and peak temperature that the calorimeter can achieve are 15 °C/min and 300 °C. Two optical accesses in the ARC were modified to use optical techniques such as Schlieren double pass and infrared. The results cover 3 different cell conditions: Pristine cells at state of charge (SOC) 100 %, pristine cells at SOC 50 %, and aged cells at SOC 100 %. For statical purposes, each cell condition was repeated 5 times. The aged battery was cycled to boost solid electrolyte interface growth. The images obtained were post-processed, with a specific methodology for each optical technique, and according to the parameters intended to be obtained. The main result shows that for higher SOC, the exothermic reaction is detected earlier than for SOC 50 %, which was only detected in an advanced TR stage (higher temperature rise rate). Therefore, the battery system capability to detect plays a crucial role in safety. Safety actuation time is reduced by ~ 40 % for SOC 50 %. However, the energy to manage during this situation is lower (~42 %), depending on the mass inside the battery, revealing the importance of a good venting cap design. Infrared images have shown higher particle temperatures for higher SOC, about 150 °C higher than the SOC 50 %. The particle velocity, in this case, achieved 30 m/s., This research is part of the projects TED2021-132220B-C21 and TED2021-130488A-I00, funded by the MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU /PRTR, and PID2021-124696OB-C21, funded by Ministerio de Ciencia e Innovación, Spain, Agencia Estatal de Investigación, Spain, and FEDER (MCIN/AEI/10.13039/501100011033/FEDER,UE), European Union. The authors acknowledge the Vicerrectorado de investigación de la Universitat Politècnica de València, Spain, for supporting this research through Programa de Ayudas de Investigacion y desarrollo (PAID-01-22).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Advanced electrothermal model validated by internal temperature measurements in cylindrical lithium-ion batteries

  • Juan Manuel
  • Carvallo-García, César Leonardo|||0000-0003-2297-2225
  • Monsalve-Serrano, Javier|||0000-0001-8593-095X
  • García Martínez, Antonio|||0000-0001-5783-4936
[EN] Internal temperature critically governs performance, degradation, and safety in cylindrical lithium-ion battery cells. However, a clear gap remains: most studies rely on surface sensing, which cannot resolve the core-surface gradients and transient hotspots that lead to fast degradation or failure. This work combines a minimally invasive thermocouple methodology with a systematic dataset of internal-external gradients (Delta T = Internal Temperature-External Temperature) across 10, 25, and 45 degrees C ambient temperatures and 0.3C, 0.5C, 1C, 2C and 3C current rates. For this experimental data, a reduced-order model for real-time estimation has been integrated with the systematic evaluation of real working conditions. Then, a GT-AutoLion core-surface model was calibrated and validated against the internal gas cavity of the battery cell, resulting in a three-node realistic simulation. Results show that Delta T peaks exceed 16 degrees C at 3C and 10 degrees C, but remain near 6 degrees C at 45 degrees C. The model reproduces these dynamics with a voltage RMSE of less than 7.0 mV and a temperature RMSE of less than 0.1279 degrees C. Core-to-surface temperature reveals a systematic decrease with increasing ambient temperature, decreasing from 0.1279 degrees C at 10 degrees C to 0.0188 degrees C at 45 degrees C during 1C discharge. This quantitative characterization demonstrates that low-ambient conditions produce the largest internal temperature overshoot, a critical factor for Battery Thermal Management. Temperature gradients below 5 degrees C between core and surface minimize localized degradation and prevent hotspot-induced accelerated aging or premature failure. However, thermal uniformity alone is insufficient for safety; absolute cell temperature control remains significantly key. The objective of this study is therefore to establish an experimental modeling framework that both enables direct measurement of internal temperature in a commercial cylindrical NMC cell with minimal invasiveness and delivers an experimentally validated reduced-order electrothermal model capable of estimating internal temperature without embedded sensors. This integrated framework addresses the identified gaps in the literature and provides a predictive tool for real-time thermal management of cylindrical lithium-ion cells, enhancing both safety and lifespan., This research is part of the project PID2021-124696OB-C21, funded by Ministerio de Ciencia e Innovacion, Agencia Estatal de Investigacion and FEDER (MCIN/AEI/10.13039/501100011033/FEDER,UE).