Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental measurement and modeling of the internal pressure in cylindrical lithium-ion battery cells under abuse conditions

  • García Martínez, Antonio|||0000-0001-5783-4936
  • Monsalve-Serrano, Javier|||0000-0001-8593-095X
  • Marco-Gimeno, Javier|||0000-0002-4815-3714
  • Juan Manuel
[EN] The internal pressure evolution of cylindrical lithium-ion battery cells under abuse tests is evaluated in this work. The pressure evolution is recorded through a cavity at the center of the inner structure of the cylindrical cell. Understanding pressure buildup due to exothermic reactions aids in designing safety features, such as improved venting mechanisms. The pressure activation for the safety mechanism depends on both the venting cap design and the different abuse test conditions. This study focuses on two important parameters: the state of charge (SOC) and the overheating ramp. The SOC significantly influences the venting pressure activation at the overheating abuse tests. The 18650 cell exhibits a similar venting behavior as the 21700 cell, with pressure safety mechanisms activating sooner for the 18650 cell. The geometric structure of the battery and safety mechanisms significantly influence vent-activation thresholds. After the Current Interruptor Device (CID) breakdown, pressure rises exponentially until venting occurs, due to gas generation from the decomposition of internal components and electrolyte vaporization. With the experimental data for the overheating abuse test, a model that predicts the evolution of the pressure has been developed. For the overcharging abuse test, the pressure evolution has been measured with different current rates (C-rates) to simulate overcharge with standard charging current and fast charging current. However, the internal pressure inside the cell activates the current interrupt device, which avoids overcharging the cell, thus preventing the thermal runaway (TR) from occurring., This research is part of the projects TED2021-132220B-C21 and TED2021-130488A-I00, funded by the MCIN/AEI/10.130 39/501100011033 and the European Union "NextGenerationEU"/PRTR, and PID2021-124696OB-C21, funded by Ministerio de Ciencia e Innovacion, Agencia Estatal de Investigacion and FEDER (MCIN/AEI/1 0.13039/501100011033/FEDER,UE) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Detailed characterisation of particle emissions from the thermal runaway of nickel-manganese-cobalt 811 lithium-ion batteries at different states of charge

  • García Martínez, Antonio|||0000-0001-5783-4936
  • Monsalve-Serrano, Javier|||0000-0001-8593-095X
  • Micó, Carlos|||0000-0001-5787-6212
  • Guaraco-Figueira, Carlos Rafael
[EN] Lithium -ion batteries are essential in transforming the energy sector. However, pursuing higher energy density and using flammable chemistries increase the risk of thermal runaway, a significant safety concern. To address this issue, this study utilises analytical techniques, including field emission scanning electron microscopy, inductively coupled plasma mass spectrometry, thermogravimetric analysis, and differential scanning calorimetry, to comprehensively characterise solid particle emissions from thermal abused batteries. The results highlighted that fully charged cells exhibit a more intense thermal runaway, evidenced by higher maximum temperatures and significant solid particle emissions, with a notable portion smaller than 1 mm. A detailed morphological examination revealed that at 100 % SoC, particles predominantly consist of carbon -coated metal cores, influencing their thermal oxidation characteristics. Conversely, particles from less charged cells (50 % and 75 % SoC) demonstrated a leaner combustion profile, marked by decreased carbon content and reduced thermal oxidation capacity. The research conclusively delineates the complex interplay between SoC, thermal runaway dynamics, and resultant particle emissions, emphasizing the critical need for integrated safety strategies in lithium -ion battery management and design. In conclusion, the study offers a comprehensive analysis of the repercussions of thermal runaway in lithium -ion batteries, with a special focus on NMC811 cylindrical cells. It enriches the understanding of how different charging levels affect the risk profiles of these batteries., This research is part of the projects TED2021-132220B-C21 and TED2021-130488A-I00, funded by the MCIN/AEI/10.130 39/501100011033 and the European Union "NextGenerationEU"/PRTR, and PID2021-124696OB-C21, funded by Ministerio de Ciencia e Innovacion, Agencia Estatal de Investigacion and FEDER (MCIN/AEI/1 0.13039/501100011033/FEDER,UE). The publication is part of grant PRE2022-103766, funded by MCIN/AEI/10.13039/501100011033 and ESF + .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multiphysics integrated model of NMC111 battery module for micro-mobility applications using PCM as intercell material

  • García Martínez, Antonio|||0000-0001-5783-4936
  • Monsalve-Serrano, Javier|||0000-0001-8593-095X
  • Guaraco-Figueira, Carlos Rafael
  • Dreif-Bennany, Amin
This research is part of the projects TED2021-132220B-C21 and TED2021-130488A-I00, funded by the MCIN/AEI/10.13039/501100011033 and the European Union "NextGenerationEU"/PRTR. The publication is part of the grant PRE2022-103766, funded by MCIN/AEI/10.13039/501100011033 and ESF +.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Energy assessment of the ageing phenomenon in Li-Ion batteries and its impact on the vehicle range efficiency

  • García Martínez, Antonio|||0000-0001-5783-4936
  • Monsalve-Serrano, Javier|||0000-0001-8593-095X
  • Golke, Diego
  • Martínez-Boggio, Santiago Daniel
[EN] The 2035 European Union ban on internal combustion engines pushes the transport industry toward alternative propulsion technologies. One of the most potent alternatives to the 250 million passenger automobiles in Europe is the use of electric vehicles with lithium-ion batteries as a special energy storage system. To develop a sustainable, money-saving, and mature technology like today¿s internal combustion engines, however, issues including battery deterioration, charging times, and safety must be addressed. In this study, Lithium Ferrum Phosphate and Nickel Manganese Cobalt, two distinct cathode chemistries indicative of transport solutions, are compared for cell performance and ageing. It is possible to improve battery design to increase capacity and lower the risk of thermal runaway by using experimental and numerical methods to evaluate and predict the battery ageing effect. The calibrated ageing model may also forecast battery life and its effect on the vehicle¿s driving range. The findings indicate that the Lithium Ferrum Phosphate cathode chemistry has a lower energy density and ages more quickly than the Nickel Manganese Cobalt, resulting in a shorter driving range. In specifically, a brand-new Nickel Manganese Cobalt battery provides 84 km of additional city driving range and 50 km of highway driving range over a Lithium Ferrum Phosphate battery. The Nickel Manganese Cobalt battery offers 53km more driving range on the interstate and 91 km more in urban driving at the end of its useful life (20 % capacity loss)., Operacion financiada por la Union Europea a trav¿es del Programa Operativo del Fondo Europeo de Desarrollo Regional (FEDER) de la Comunitat Valenciana 2014-2020 con el objetivo de promover el desarrollo tecnologico, la innovacion y una investigacion de calidad. Proyecto IDIFEDER/2021/53, Equipamiento Para El Estudio Del Fenomeno De Combustion No Controlada En Baterías De Vehículos Electricos, entidad beneficiaria Universitat Politecnica de Valencia. The authors also acknowledge Agencia Valenciana de la Innovacion for partially supporting this research through DETEBAT-VE project (INNEST/2021/120). This research is part of the project TED2021-130488AI00, funded by the MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU /PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Comparative CT scan and U-net segmentation analysis of NMC811 batteries after thermal runaway triggered by various abuse methods and states of charge

  • García Martínez, Antonio|||0000-0001-5783-4936
  • Monsalve-Serrano, Javier|||0000-0001-8593-095X
  • Marco-Gimeno, Javier|||0000-0002-4815-3714
  • Guaraco-Figueira, Carlos Rafael
[EN] As lithium-ion batteries become more prevalent in energy storage, understanding thermal runaway phenomena and characterization methods has gained scientific importance. This study assesses the impact of the State of Charge (SoC) on the internal morphology of lithium-ion batteries after thermal runaway, induced by three methodologies: Heat, Wait, and Seek (thermal abuse), Nail Penetration (mechanical abuse), and Laser Irradiation. The behaviour of 18650 NMC811 cylindrical cells was evaluated using these methods. Post-abuse, the internal morphology was analysed via CT scanning with an X-ray microscope, highlighting deformed areas to reconstruct a three-dimensional model of the cells. The scans were segmented using the U-Net protocol to identify remaining components inside the casings. Results show that cells with lower SoC retain more active material after thermal runaway due to less severe reactions, resulting in less internal collapse compared to fully charged cells. Higher SoC cells exhibited blockages in the venting cap from collapsed materials and metal foils. Among the methodologies, Nail Penetration left the least residual active material and metal foils, while Laser Irradiation caused the least material removal and structural deformation. This study provides new insights into the thermal runaway phenomena under varying states of charge and abuse methodologies., This research is part of the projects TED2021-132220B-C21 and TED2021-130488A-I00, funded by the MCIN/AEI/10.13039/ 501100011033 and the European Union NextGenerationEU /PRTR, and PID2021-124696OB-C21, funded by Ministerio de Ciencia e Innovacion, Agencia Estatal de Investigacion and FEDER (MCIN/AEI/10.13039/501100011033/FEDER,UE). The publication is part of grant PRE2022-103766, funded by MCIN/AEI/10.13039/501100011033 and ESF+.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Cell-to-cell dispersion impact on zero-dimensional models for predicting thermal runaway parameters of NCA and NMC811

  • García Martínez, Antonio|||0000-0001-5783-4936
  • Pastor, José V.|||0000-0003-4113-4681
  • Monsalve-Serrano, Javier|||0000-0001-8593-095X
  • Golke, Diego
[EN] The battery electric vehicle is the leading technology for reducing greenhouse gas emissions using clean and renewable energy. However, concerns due to battery thermal runaway are becoming more severe as the battery energy density increases. Fast-calculation models capable of predicting the heat released during the thermal runaway phenomenon can help to develop safety mechanisms according to the battery chemistry. The current study assesses the battery thermal runaway variability for two different battery chemistries, nickel cobalt aluminium oxides and nickel manganese cobalt oxides, for 3 different states of charge (100%, 80% and 50%), two different battery sizes (18,650 and 21,700), and two different battery health (pristine and aged). The tests are performed in the accelerating rate calorimeter using the heat-wait-seek protocol and repeated 5 times (each battery condition) for statistical analysis of the main thermal runaway parameters. A model using the Arrhenius equation was developed, calibrated, and validated. The model was developed considering 5 steps during temperature evolution to the reliable prediction of thermal runaway characteristics, considering inputs as states of charge, capacity fade (solid electrolyte interface growth), energy density, battery end mass and initial voltage. The experimental tests show that temperature rise rate, when the exothermic is detected, and battery end mass play an important role in the self-heating duration and maximum temperature, respectively, which are key parameters to understanding scattering behaviour. Considering these effects during modelling, the model can forecast the primary features of a thermal runaway, including maximum temperature, onset temperature, and duration of the whole battery thermal runaway process, all within the average difference of no more than 3%. For this reason, the model proposed seems to be a suitable tool for battery safety mechanism design as it considers the state of charge, energy density and ageing effects., The authors acknowledge the Vicerrectorado de investigacion de la Universitat Politecnica de Valencia for supporting this research through Programa de Ayudas de Investigacion y desarrollo (PAID-01-22). This research is part of the projects TED2021-132220B-C21 and TED2021-130488 A-I00, funded by the MCIN/AEI/10.13039/501100011033 and the European Union "NextGenerationEU"/PRTR. This research is part of the project PID2021-124696OB-C21, funded by Ministerio de Ciencia e Innovacion, Agencia Estatal de Investigacion and FEDER (MCIN/AEI/1 0.13039/501100011033/FEDER, UE).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A tabulation method of Li-ion Thermal Runaway mechanisms for the acceleration of high dimensional simulations

  • García Martínez, Antonio|||0000-0001-5783-4936
  • Micó, Carlos|||0000-0001-5787-6212
  • Marco-Gimeno, Javier|||0000-0002-4815-3714
  • Bernal, Andrés
[EN] High-Fidelity numerical simulations of the Thermal Runaway (TR) phenomenon on lithium-ion batteries (LIB) depict stiff system of equations that need to be solved with extremely low time-steps to ensure numerical stability. In the present study, a methodology is presented to improve computational times and convergence of three-dimensional studies. A tabulation approach of the developed chemical kinetics models on the literature is presented to avoid the resolution of the set of Ordinary Differential Equations (ODE) that define the self-heating behavior of LIB under thermal degradation conditions. The desired tables have been obtained through 0-dimensional models for three different cathode materials ( LiCoO 2 , NMC111 and NCA) and the TR mechanism have been replicated with the tabulation method firstly through the 0-dimensional approach and then translated to a 3-dimensional model to ensure its functionality and assess the minimum time-step needed for performing TR simulations. The results through the tabulation method replicate almost exactly the onset temperature for the three cathode chemistry both 0-dimensonally and 3-dimensionally. Additionally, a significant speed up is reported for TR propagation studies performed, allowing time-steps three orders of magnitude larger than through traditional methods while ensuring numerical stability., This research is part of the projects TED2021-132220B-C21 and TED2021-130488AI00, funded by the MCIN/AEI/10.13039/501100011033 and the European Union "NextGenerationEU"/PRTR, and PID2021-124696OB-C21, funded by Ministerio de Ciencia e Innovacion, Agencia Estatal de Investigacion and FEDER (MCIN/AEI/10.13039/5011000110 33/FEDER,UE) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Characterization of pristine and aged NMC lithium-ion battery thermal runaway using ARC experiments coupled with optical techniques

  • García Martínez, Antonio|||0000-0001-5783-4936
  • Monsalve-Serrano, Javier|||0000-0001-8593-095X
  • Golke, Diego
  • De Vargas Lewiski, Felipe
[EN] Battery thermal runaway (TR) challenges battery applications due to safety considerations, potentially endangering consumers. Understanding the process is crucial to defining first alarm strategies that indicate the risk of TR and designing systems to mitigate this problem. For this reason, the present paper aims to characterise key variables of the venting and thermal runaway processes. Experimental tests were conducted in an accelerating rate calorimeter (ARC) using the heat wait seek (HWS) protocol, which tracks the battery temperature after detecting an exothermic reaction during the seek period. The maximum temperature rise rate and peak temperature that the calorimeter can achieve are 15 °C/min and 300 °C. Two optical accesses in the ARC were modified to use optical techniques such as Schlieren double pass and infrared. The results cover 3 different cell conditions: Pristine cells at state of charge (SOC) 100 %, pristine cells at SOC 50 %, and aged cells at SOC 100 %. For statical purposes, each cell condition was repeated 5 times. The aged battery was cycled to boost solid electrolyte interface growth. The images obtained were post-processed, with a specific methodology for each optical technique, and according to the parameters intended to be obtained. The main result shows that for higher SOC, the exothermic reaction is detected earlier than for SOC 50 %, which was only detected in an advanced TR stage (higher temperature rise rate). Therefore, the battery system capability to detect plays a crucial role in safety. Safety actuation time is reduced by ~ 40 % for SOC 50 %. However, the energy to manage during this situation is lower (~42 %), depending on the mass inside the battery, revealing the importance of a good venting cap design. Infrared images have shown higher particle temperatures for higher SOC, about 150 °C higher than the SOC 50 %. The particle velocity, in this case, achieved 30 m/s., This research is part of the projects TED2021-132220B-C21 and TED2021-130488A-I00, funded by the MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU /PRTR, and PID2021-124696OB-C21, funded by Ministerio de Ciencia e Innovación, Spain, Agencia Estatal de Investigación, Spain, and FEDER (MCIN/AEI/10.13039/501100011033/FEDER,UE), European Union. The authors acknowledge the Vicerrectorado de investigación de la Universitat Politècnica de València, Spain, for supporting this research through Programa de Ayudas de Investigacion y desarrollo (PAID-01-22).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analysis of the thermal runaway phenomenon of Nickel-Manganese-Cobalt cells induced by nail penetration through high-speed infrared imaging

  • García Martínez, Antonio|||0000-0001-5783-4936
  • Monsalve-Serrano, Javier|||0000-0001-8593-095X
  • Golke, Diego
  • De Vargas Lewiski, Felipe
[EN] Gradual replacement of fossil fuels by clean and renewable energies is crucial to minimize the greenhouse effect from the transport sector. The electric vehicle is intended to be the leading technology for this purpose, for which clean and renewable energy must be stored as chemical energy in the battery. From the safety point of view, the main issue of this technology is related to the risk of thermal runaway. Among other factors, a collision can be one of the causes of a battery electric vehicle explosion, as damage to the surface of the battery can generate a short circuit, resulting in a battery thermal runaway. To replicate this situation at a system level, the nail penetration test is reproduced in laboratories. In this work, the effect of the nail penetration position, battery state of charge (SOC) and initial ambient temperature on the thermal runaway behavior of a Nickel-Manganese-Cobalt 811 cell is investigated. Infrared images were used to evaluate the temperature distribution in the battery surface, revealing the root causes for the scattering observed in the surface temperature when measured through thermocouples. Furthermore, a methodology to correct the thermographic images is described, abording the main uncertainties related to the characteristics of the optical access. The results show that the battery state of charge has a strong effect on the heat release than nail position and initial ambient temperature, increasing in 20 % from SOC 50 % to SOC 100 %. Regarding the position, nail penetration tests at the top of the battery lead to lower temperatures when compared to the other positions, representing 10 % less heat release than middle and bottom nail position. Furthermore, the thermographic images showed a variability in the spatial distribution of temperature between the test cells of up to 40 degrees C, with case rupture being mainly responsible for the higher values., The authors acknowledge the Vicerrectorado de investigacion de la Universitat Politecnica de Valencia for supporting this research through Ayuda a primeros proyectos de investigacion (PAID -06-22) y Programa de Ayudas de Investigacion y desarrollo (PAID -01-22). This research is part of the projects TED2021-132220B-C21 and TED2021-130488A-I00, funded by the MCIN/AEI/10.13039/501100011033 and the European Union "NextGenerationEU"/PRTR. Operacion financiada por la Union Europea a traves del Programa Operativo del Fondo Europeo de Desarrollo Regional (FEDER) de la Comunitat Valenciana 2014-2020 con el objetivo de promover el desarrollo tecnologico, la innovacion y una investigacion de calidad. Proyecto IDIFEDER/2021/053, Equi pamiento para el estudio del fenomeno de combustion no controlada en baterias de vehiculos electricos, entidad beneficiaria Universitat Poliecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhancing thermal runaway characterization in NMC811 lithium-ion batteries through laser-induced triggering

  • García Martínez, Antonio|||0000-0001-5783-4936
  • Monsalve-Serrano, Javier|||0000-0001-8593-095X
  • Guaraco-Figueira, Carlos Rafael
  • De Vargas Lewiski, Felipe
This research is part of the projects TED2021-132220B C21 and TED2021-130488A-I00, funded by the MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU /PRTR. The publication is part of grant PRE2022-103766, funded by MCIN/AEI/10.13039/501100011033 and ESF
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis de maestría (MasterThesis)

Computational fluid dynamics simulation of gas ejection occurring during thermal runaway in cylindrical lithium-ion batteries, Simulación mediante dinámica de fluidos computacional de la eyección de gas que se produce durante el proceso de fuga térmica en baterías cilíndricas de iones de litio, Simulació mitjançant dinàmica de fluids computacional de l&apos, ejecció de gasos que es produeix durant el procés de fuga tèrmica en bateries d&apos, ions de liti cilíndriques

  • Castro Espín, Mar
[ES] En los últimos años los sistemas de propulsión limpios y sostenibles han experimentado un gran impulso, en detrimento de soluciones más tradicionales como los motores de combustión interna alternativos. Una de las soluciones que más aceptación tiene y que ha experimentado mayor crecimiento es la propulsión eléctrica impulsada por baterías de iones de litio. Sin embargo, uno de los principales problemas a los que se debe enfrentar en la actualidad es la seguridad. La búsqueda de prestaciones como la potencia y/o la densidad energética en los sistemas de baterías está altamente ligada a riesgos de seguridad a través de un proceso que se conoce como fuga térmica. Se trata de un fenómeno durante el cual una batería puede emitir gran cantidad de energía y materiales tóxicos e inflamables. Estos últimos representan uno de los aspectos más críticos, puesto que puede iniciar una combustión que extiende el fallo a todo el sistema. Por lo tanto, es importante comprender dicho fenómeno de liberación de gases como paso para aumentar la seguridad de las baterías. Así, este Trabajo Fin de Máster se centra en en uso de la dinámica de fluidos computacional para predecir el proceso de eyección de gases. El trabajo se centra en el desarrollo de una metodología apropiada para establecer las condiciones de contorno adecuadas adecuadas que permitan recrear fielmente este evento, incluyendo la configuración de la presión que se alcanza dentro de la celda. Además, se presenta una metodología de análisis que permite extraer las características macroscópicas del chorro de gases y que caracterizan su propagación., [EN] In recent years, clean and sustainable propulsion systems have experienced significant growth, displacing more traditional solutions such as alternative internal combustion engines. One of the most widely accepted and fastest-growing solutions is electric propulsion powered by lithium-ion batteries. However, one of the main challenges facing these systems today is safety. The pursuit of performance such as power and/or energy density in battery systems is closely linked to safety risks through a process known as thermal runaway. This phenomenon, during which a battery can emit large amounts of energy and toxic and flammable materials. The latter represent one of the most critical aspects, as it can initiate combustion, resulting in a failure that extends to the entire system. Therefore, it is important to understand this gas release phenomenon as a step toward increasing battery safety. Thus, this Master's Thesis focuses on the use of computational fluid dynamics to predict the gas ejection process. The work focuses on developing an appropriate methodology to establish the appropriate boundary conditions to faithfully recreate this event, including the pressure configuration reached within the cell. In addition, an analysis methodology is presented that allows for extracting the macroscopic characteristics of the gas jet and its propagation., The authors acknowledge the Vicerrectorado de investigación de la Universitat Politècnica de València for supporting this research through. Ayuda a primeros proyectos de investigación (PAID-06-22) y Programa de Ayudas de Investigación y desarrollo (PAID-01-22). This research is part of the project TED2021-130488A-I00, funded by the MCIN/AEI/10.13039/501100011033 and the European Union “NextGenerationEU”/PRTR.