Pasar al contenido principal

SIGUIENTE GENERACION DE INSTRUMENTACION PARA CARACTERIZAR LA INTERFAZ SUPERFICIE-SUBSUPERFICIE EN EXPLORACION PLANETARIA: SENSORES DE VIENTO PARA MARTE Y SONDAS PARA REGOLITO

PID2021-126719OB-C42

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Stochastic dynamics in first-order thermal Sigma-Delta modulation

  • Domínguez-Pumar, Manuel
  • Ceballos-Cáceres, J.
  • Torre Juárez, Manuel de la
  • Navarro, Sara
  • Marín, Mercedes
  • Gómez-Elvira, Javier
  • Rodríguez-Manfredi, José Antonio
The objective of this paper is the analysis of stochastic drifts in first-order thermal Sigma-Delta modulation due to the presence of noise at the input of the comparator. This type of temperature controls has been extensively used in constant temperature anemometry in three missions to Mars. It will be shown that the presence of additive zero-mean noise at the input of the comparator generates non-zero mean drifts on the controlled temperatures. These drifts may increase the response time of sensors working under Constant Temperature Operation (CTO). The case of the MEDA wind sensor in Mars2020 is analyzed, showing that even though this phenomenon slightly increases the response time above the expected thermal dynamics under perfect CTO, it is still below the 0.5 s requirement for the 90% response time. A comparison is presented between the modeled dynamics and measurements made in wind tunnel., This work has been partially funded by MICINN, Spain, grant nos. PID2021-126719OB-C41, PID2021-126719OB-C42, PID2021-126719OB-C43 by the Spain Ministry of Science, Innovation/State Agency of Research MCIN/AEI/ 10.13039/501100011033, by “ERDF A way of making Europe” TED2021-131442B-C32 and PDC2023-145889-C22; AGAUR, Spain, grant no. 56 30142 2021 2A, CPP2021-008740 and CPP2023-010559. Part of this work was carried out at the Jet Propulsion Laboratory/California Institute of Technology, United States under a NASA-STMD grant, and under a contract with the National Aeronautics and Space Administration, United States (80NM0018D0004)., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Stochastic dynamics in first-order thermal Sigma-Delta modulation

  • Domínguez Pumar, Manuel|||0000-0001-5439-7953
  • Ceballos Cáceres, Joaquín
  • Torre Juárez, Manuel de la
  • Navarro Lopez, Sara
  • Marín Jiménez, Mercedes
  • Gómez Elvira, Javier
  • Rodríguez Manfredi, José Antonio
The objective of this paper is the analysis of stochastic drifts in first-order thermal Sigma-Delta modulation due to the presence of noise at the input of the comparator. This type of temperature controls has been extensively used in constant temperature anemometry in three missions to Mars. It will be shown that the presence of additive zero-mean noise at the input of the comparator generates non-zero mean drifts on the controlled temperatures. These drifts may increase the response time of sensors working under Constant Temperature Operation (CTO). The case of the MEDA wind sensor in Mars2020 is analyzed, showing that even though this phenomenon slightly increases the response time above the expected thermal dynamics under perfect CTO, it is still below the 0.5 s requirement for the 90% response time. A comparison is presented between the modeled dynamics and measurements made in wind tunnel., This work has been partially funded by MICINN, Spain, grant nos. PID2021-126719OB-C41, PID2021-126719OB-C42, PID2021-126719OB-C43 by the Spain Ministry of Science, Innovation/State Agency of Research MCIN/AEI/ 10.13039/501100011033, by “ERDF A way of making Europe” TED2021-131442B-C32 and PDC2023-145889-C22; AGAUR, Spain, grant no. 56 30142 2021 2A, CPP2021-008740 and CPP2023-010559. Part of this work was carried out at the Jet Propulsion Laboratory/California Institute of Technology, United States under a NASA-STMD grant, and under a contract with the National Aeronautics and Space Administration, United States (80NM0018D0004)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Boosting the sensitivity and hysteresis of a gel polymer electrolyte by embedding SiO2 nanoparticles and PVP for humidity applications

  • Cedeño Mata, Kristel Michelle|||0000-0003-2046-4374
  • Orpella García, Alberto|||0000-0003-2726-5861
  • Domínguez Pumar, Manuel|||0000-0001-5439-7953
  • Bermejo Broto, Sandra|||0000-0003-1660-0273
Enhancing sensitivity and hysteresis in capacitance humidity sensors is vital for precise, reliable, and consistent humidity control. This study explores this concern by incorporating polyvinylpyrrolidone (PVP) and SiO2 nanoparticles into a polyvinyl alcohol (PVA)-based ionic liquid gel polymer electrolyte (ILGPE), studying two capacitor types: ILGPE and SiO2 composite ILGPE (CILGPE) capacitors. These novel electrolytes use ammonium acetate as a plasticiser, 1-butyl-3-methylimidazolium bromide as an ionic liquid, SiO2 nanoparticles as a composite, and PVA and PVP as host polymers. Capacitors were characterised and modelled using impedance spectroscopy (IS), providing an electrophysical insight into their working principle. Sensitivity and hysteresis were evaluated within a 20–90% relative humidity (RH) range at 25 °C. The SiO2 CILGPE capacitor with PVP presented superior sensitivity and hysteresis, revealing the beneficial combination of SiO2 nanoparticles and PVP. These benefits are due to the creation of pathways that facilitate water molecule diffusion and crystallinity reduction in PVA-ILGPE. In particular, at 10 kHz, it demonstrates a calibrated capacitance sensitivity of 2660 pF/%RH and a hysteresis of 3.28 %RH. This optimised capacitor outperforms some previous humidity capacitive sensors in sensitivity while exhibiting low hysteresis., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Extension of the frequency range of thermal impedance measurements for the characterization of the thermophysical properties of regolith

  • Rosero Pozo, Carlos Alberto|||0000-0003-3660-727X
  • Pons Nin, Joan|||0000-0002-0356-5678
  • Kumar, Suresh|||0000-0002-8079-0107
  • Jiménez Serres, Vicente|||0000-0001-5668-7049
  • Bermejo Broto, Sandra|||0000-0003-1660-0273
  • Domínguez Pumar, Manuel|||0000-0001-5439-7953
An effective approach for the extension of the frequency range of a miniaturized thermoprobe for the measurement of the thermophysical properties of regolith is proposed. The thermoprobe inserted into the regolith measures its thermal impedance in the frequency domain to infer the thermal conductivity and thermal diffusivity. The frequency extension is based on improved modeling of the heat transfer inside the sensor head and through the supporting structure of the thermoprobe. A Finite Element Method tool has been used to model this transfer function. The thermophysical properties of nine different samples including glass microbeads and the Enhanced Mojave Mars Simulant have been estimated. The results are compared with the reference values measured by a dual-probe heat-pulse standard analyzer at room atmospheric conditions. Errors below 8% for thermal conductivity and below 7% for thermal diffusivity have been observed. The proposed approach represents a very important reliability improvement, since it allows decreasing the minimum measurement frequency by a factor of 10, allowing to capture the most representative part of the thermal impedance spectra, and thus making a far more robust measurement., This work has been partially funded by MICINN, grants no. PID2021-126719OB-C42, CPP2021-008740, PDC2023-145889-C22, TED2021-131442B-C32 and CPP2023-010559., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Dynamics of constant temperature anemometers for the Martian Atmosphere

  • Domínguez Pumar, Manuel|||0000-0001-5439-7953
  • Torre Juárez, Manuel de la
  • Navarro Lopez, Sara
  • Martín Martínez, Mercedes
  • Gómez Elvira, Javier
  • Rosero Pozo, Carlos Alberto|||0000-0003-3660-727X
  • Manyosa i Vilardell, Xavier|||0000-0003-3132-1678
  • Bermejo Broto, Sandra|||0000-0003-1660-0273
  • Rodríguez Manfredi, José Antonio
The objective of this paper is to understand the limits on the response time generated by the thermal dynamics of the Martian wind sensor of the MEDA instrument, working under Constant Temperature Operation (CTO). This technology has been flown aboard the Mars Science Laboratory, InSight, and Mars 2020. It will be shown that active control thermal anemometry enables a time response to wind fluctuations faster than the time constants defined by the thermal inertia of the sensor components. It will also be shown that the temperature redistributions on the temperature-uncontrolled parts of the supporting structure impose a limit on the bandwidth of the sensor. We present a model of the MEDA hot film anemometers describing what parameters control their dynamical response, why wind tunnel testing confirmed them to be faster than 1 s, and criteria to select materials that reduce the response time to approach 0.2 s., This work has been partially funded by MICINN, grants no. PID2021-126719OB-C41 and PID2021-126719OB-C42. Part of this work was carried out at the Jet Propulsion Laboratory/California Institute of Technology under a NASA-STMD grant, and under a contract with the National Aeronautics and Space Administration, United States (80NM0018D0004)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Noise-induced tracking errors in discrete-time sliding mode controls for sensors

  • Domínguez Pumar, Manuel|||0000-0001-5439-7953
The objective of this paper is to analyze, using Itô diffusions, the stochastic non-zero-mean drifts generated by noise at the input of the comparator in first-order sigma-delta modulators implementing discrete-time sliding-mode controls. These controls have been used in constant temperature anemometry in three missions to Mars. The objective is to expand previous results obtained with discrete-time Markov chains, by using the high-rate (continuous-time) diffusion limit with Itô diffusions. The studied examples are time-variant thermal models used for the wind sensors. The distributions will be analyzed using the gradient flow interpretation, and by solving the Fokker-Planck equations. Second order stability is analyzed using the dead zone Lyapunov function analysis, for one-dimensional and multi-dimensional models. Guidelines for the design of sensors working under quasi-constant state operation are provided., This work has been partially funded by MICINN, grants no. PID2021-126719OB-C42 and PID2024-161247OB-C32, by the Spain Ministry of Science, Innovation/State Agency of Research MCIN/AEI/ 10.13039/501100011033, by “ERDF A way of making Europe” and CPP2021-008740, PDC2023-145889-C22 and CPP2023-010559., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Extension of the frequency range of thermal impedance measurements for the characterization of the thermophysical properties of regolith

  • Rosero Pozo, Carlos Alberto
  • Pons Nin, Joan
  • Kumar, Suresh
  • Jiménez Serres, Vicente
  • Bermejo Broto, Sandra
  • Domínguez Pumar, Manuel
An effective approach for the extension of the frequency range of a miniaturized thermoprobe for the measurement of the thermophysical properties of regolith is proposed. The thermoprobe inserted into the regolith measures its thermal impedance in the frequency domain to infer the thermal conductivity and thermal diffusivity. The frequency extension is based on improved modeling of the heat transfer inside the sensor head and through the supporting structure of the thermoprobe. A Finite Element Method tool has been used to model this transfer function. The thermophysical properties of nine different samples including glass microbeads and the Enhanced Mojave Mars Simulant have been estimated. The results are compared with the reference values measured by a dual-probe heat-pulse standard analyzer at room atmospheric conditions. Errors below 8% for thermal conductivity and below 7% for thermal diffusivity have been observed. The proposed approach represents a very important reliability improvement, since it allows decreasing the minimum measurement frequency by a factor of 10, allowing to capture the most representative part of the thermal impedance spectra, and thus making a far more robust measurement., This work has been partially funded by MICINN, grants no. PID2021-126719OB-C42, CPP2021-008740, PDC2023-145889-C22, TED2021-131442B-C32 and CPP2023-010559., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Dynamics of constant temperature anemometers for the Martian Atmosphere

  • Domínguez Pumar, Manuel
  • Torre Juárez, Manuel de la
  • Navarro Lopez, Sara
  • Martín Martínez, Mercedes
  • Gómez Elvira, Javier
  • Rosero Pozo, Carlos Alberto
  • Manyosa i Vilardell, Xavier
  • Bermejo Broto, Sandra
  • Rodríguez Manfredi, José Antonio
The objective of this paper is to understand the limits on the response time generated by the thermal dynamics of the Martian wind sensor of the MEDA instrument, working under Constant Temperature Operation (CTO). This technology has been flown aboard the Mars Science Laboratory, InSight, and Mars 2020. It will be shown that active control thermal anemometry enables a time response to wind fluctuations faster than the time constants defined by the thermal inertia of the sensor components. It will also be shown that the temperature redistributions on the temperature-uncontrolled parts of the supporting structure impose a limit on the bandwidth of the sensor. We present a model of the MEDA hot film anemometers describing what parameters control their dynamical response, why wind tunnel testing confirmed them to be faster than 1 s, and criteria to select materials that reduce the response time to approach 0.2 s., This work has been partially funded by MICINN, grants no. PID2021-126719OB-C41 and PID2021-126719OB-C42. Part of this work was carried out at the Jet Propulsion Laboratory/California Institute of Technology under a NASA-STMD grant, and under a contract with the National Aeronautics and Space Administration, United States (80NM0018D0004)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Noise-induced tracking errors in discrete-time sliding mode controls for sensors

  • Domínguez Pumar, Manuel
The objective of this paper is to analyze, using Itô diffusions, the stochastic non-zero-mean drifts generated by noise at the input of the comparator in first-order sigma-delta modulators implementing discrete-time sliding-mode controls. These controls have been used in constant temperature anemometry in three missions to Mars. The objective is to expand previous results obtained with discrete-time Markov chains, by using the high-rate (continuous-time) diffusion limit with Itô diffusions. The studied examples are time-variant thermal models used for the wind sensors. The distributions will be analyzed using the gradient flow interpretation, and by solving the Fokker-Planck equations. Second order stability is analyzed using the dead zone Lyapunov function analysis, for one-dimensional and multi-dimensional models. Guidelines for the design of sensors working under quasi-constant state operation are provided., This work has been partially funded by MICINN, grants no. PID2021-126719OB-C42 and PID2024-161247OB-C32, by the Spain Ministry of Science, Innovation/State Agency of Research MCIN/AEI/ 10.13039/501100011033, by “ERDF A way of making Europe” and CPP2021-008740, PDC2023-145889-C22 and CPP2023-010559., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Boosting the sensitivity and hysteresis of a gel polymer electrolyte by embedding SiO2 nanoparticles and PVP for humidity applications

  • Cedeño Mata, Kristel Michelle
  • Orpella García, Alberto
  • Domínguez Pumar, Manuel
  • Bermejo Broto, Sandra
Enhancing sensitivity and hysteresis in capacitance humidity sensors is vital for precise, reliable, and consistent humidity control. This study explores this concern by incorporating polyvinylpyrrolidone (PVP) and SiO2 nanoparticles into a polyvinyl alcohol (PVA)-based ionic liquid gel polymer electrolyte (ILGPE), studying two capacitor types: ILGPE and SiO2 composite ILGPE (CILGPE) capacitors. These novel electrolytes use ammonium acetate as a plasticiser, 1-butyl-3-methylimidazolium bromide as an ionic liquid, SiO2 nanoparticles as a composite, and PVA and PVP as host polymers. Capacitors were characterised and modelled using impedance spectroscopy (IS), providing an electrophysical insight into their working principle. Sensitivity and hysteresis were evaluated within a 20–90% relative humidity (RH) range at 25 °C. The SiO2 CILGPE capacitor with PVP presented superior sensitivity and hysteresis, revealing the beneficial combination of SiO2 nanoparticles and PVP. These benefits are due to the creation of pathways that facilitate water molecule diffusion and crystallinity reduction in PVA-ILGPE. In particular, at 10 kHz, it demonstrates a calibrated capacitance sensitivity of 2660 pF/%RH and a hysteresis of 3.28 %RH. This optimised capacitor outperforms some previous humidity capacitive sensors in sensitivity while exhibiting low hysteresis., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Stochastic dynamics in first-order thermal Sigma-Delta modulation

  • Domínguez Pumar, Manuel
  • Ceballos Cáceres, Joaquín
  • Torre Juárez, Manuel de la
  • Navarro Lopez, Sara
  • Marín Jiménez, Mercedes
  • Gómez Elvira, Javier
  • Rodríguez Manfredi, José Antonio
The objective of this paper is the analysis of stochastic drifts in first-order thermal Sigma-Delta modulation due to the presence of noise at the input of the comparator. This type of temperature controls has been extensively used in constant temperature anemometry in three missions to Mars. It will be shown that the presence of additive zero-mean noise at the input of the comparator generates non-zero mean drifts on the controlled temperatures. These drifts may increase the response time of sensors working under Constant Temperature Operation (CTO). The case of the MEDA wind sensor in Mars2020 is analyzed, showing that even though this phenomenon slightly increases the response time above the expected thermal dynamics under perfect CTO, it is still below the 0.5 s requirement for the 90% response time. A comparison is presented between the modeled dynamics and measurements made in wind tunnel., This work has been partially funded by MICINN, Spain, grant nos. PID2021-126719OB-C41, PID2021-126719OB-C42, PID2021-126719OB-C43 by the Spain Ministry of Science, Innovation/State Agency of Research MCIN/AEI/ 10.13039/501100011033, by “ERDF A way of making Europe” TED2021-131442B-C32 and PDC2023-145889-C22; AGAUR, Spain, grant no. 56 30142 2021 2A, CPP2021-008740 and CPP2023-010559. Part of this work was carried out at the Jet Propulsion Laboratory/California Institute of Technology, United States under a NASA-STMD grant, and under a contract with the National Aeronautics and Space Administration, United States (80NM0018D0004)., Peer Reviewed, Postprint (published version)