Pasar al contenido principal

DISPOSITIVOS ELECTRONICOS EN LA FRONTERA ENTRE LA ELECTRONICA Y EL ELECTROMAGNETISMO: 2DFETS, RTDS Y RECTENNAS

PID2021-127840NB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD AUTONOMA DE BARCELONA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 24
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

High-Data-Rate Modulators Based on Graphene Transistors, Device Circuit Co-Design Proposals †

  • Pacheco-Sanchez, Anibal|||0000-0002-0897-0605
  • Ramos Silva, Javier Noé|||0000-0002-7644-6215
  • Mavredakis, Nikolaos|||0000-0003-3630-9416
  • Ramirez-Garcia, Eloy|||0000-0002-2594-621X
  • Jiménez, David|||0000-0002-8148-198X
The multifunctionality feature of graphene field-effect transistors (GFETs) is exploited here to design circuit building blocks of high-data-rate modulators by using a physics-based compact model. Educated device performance projections are obtained with the experimentally calibrated model and used to choose an appropriate improved feasible GFET for these applications. Phase-shift and frequency-shift keying (PSK and FSK) modulation schemes are obtained with (Formula presented.) (Formula presented.) (Formula presented.) GFET-based multifunctional circuits used alternatively in different operation modes: inverting and in-phase amplification and frequency multiplication. An adequate baseband signal applied to the transistors' input also serves to enhance the device and circuit performance reproducibility since the impact of traps is diminished. Quadrature PSK is also achieved by combining two GFET-based multifunctional circuits. This device circuit co-design proposal intends to boost the heterogeneous implementation of graphene devices with incumbent technologies into a single chip: the baseband pulses can be generated with CMOS technology as a front end of line and the multifunctional GFET-based circuits as a back end of line.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Physics-based bias-dependent compact modeling of 1/f noise in single- to few-layer 2D-FETs

  • Mavredakis, Nikolaos|||0000-0003-3630-9416
  • Pacheco-Sanchez, Anibal|||0000-0002-0897-0605
  • Alam, Hasibul|||0000-0002-4923-0873
  • Guimerà Brunet, Anton|||0000-0003-1768-3293
  • Martinez, Javier
  • Garrido, Jose|||0000-0001-5621-1067
  • Akinwande, Deji|||0000-0001-7133-5586
  • Jiménez, David|||0000-0002-8148-198X
1/f noise is a critical figure of merit for the performance of transistors and circuits. For two-dimensional devices (2D-FETs), and especially for applications in the GHz range where short-channel FETs are required, the velocity saturation (VS) effect can result in the reduction of 1/f noise at high longitudinal electric fields. A new physics-based compact model has been for the first time introduced for single- to few-layer 2D-FETs in this study, precisely validating 1/f noise experiments for various types of devices. The proposed model mainly accounts for the measured 1/f noise bias dependence as the latter is defined by different physical mechanisms. Thus, analytical expressions are derived, valid in all regions of operation in contrast to conventional approaches available in the literature so far, accounting for carrier number fluctuation (ΔN), mobility fluctuation (Δμ) and contact resistance (ΔR) effects based on the underlying physics that rules these devices. The ΔN mechanism due to trapping/detrapping together with an intense Coulomb scattering effect dominates the 1/f noise from the medium to the strong accumulation region while Δμ has also been demonstrated to modestly contribute in the subthreshold region. ΔR can also be significant in a very high carrier density. The VS induced reduction of 1/f noise measurements at high electric fields was also remarkably captured by the model. The physical validity of the model can also assist in extracting credible conclusions when conducting comparisons between experimental data from devices with different materials or dielectrics.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Displacement Current in Classical and Quantum Systems

  • Ferry, David K.|||0000-0002-0942-8033
  • Oriols, Xavier|||0000-0003-2181-4284
  • Eisenberg, Robert|||0000-0002-4860-5434
It is certain that electrical properties-whether slow (sec) or fast (nsec), even optical (fsec)-are described by Maxwell's equations, and there are terms that depend on the rate of the change of the electric and magnetic fields. In particular, Maxwell's equation for the curl of the magnetic field contains both the steady-state conduction current and a term depending upon the temporal derivative of the electric displacement field. The latter is referred to as the displacement current and is generally believed to have been included originally by Maxwell himself, although there is evidence it was earlier considered by Kirchhoff. Maxwell's equations and Kirchoff's circuit laws both are important over the wide range of frequencies with which electronics traditionally deal. Additionally, the displacement current is an important contribution to these in both classical and quantum mechanics. Here, the development of the displacement current, its importance in both classical and quantum mechanics, and some applications are provided to illustrate the fundamental role that it plays in the dynamics of a wide range of systems.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Physics-Based Compact Modeling for the Drain Current Variability in Single-Layer Graphene FETs

  • Mavredakis, Nikolaos|||0000-0003-3630-9416
  • Pacheco-Sanchez, Anibal|||0000-0002-0897-0605
  • Garcia Cortadella, Ramon|||0000-0002-1506-6534
  • Guimerà Brunet, Anton|||0000-0003-1768-3293
  • Garrido, Jose|||0000-0001-5621-1067
  • Jiménez, David|||0000-0002-8148-198X
For the growth of emerging graphene field effect transistor (GFET) technologies, a thorough characterization of on-wafer variability is required. Here, we report for the first time a physics-based compact model, which precisely describes the drain current (ID) fluctuations of monolayer GFETs. Physical mechanisms known to generate 1/f noise in transistors, such as carrier number and Coulomb scattering mobility fluctuations, are also revealed to cause (ID) variance. Such effects are considered in the model by being activated locally in the channel and the integration of their contributions from source to drain results in total variance. The proposed model is experimentally validated from a statistical population of three different-sized solution-gated (SG) GFETs from strong p- to strong n-type bias conditions. A series resistance (ID) variance model is also derived mainly contributing at high carrier densities.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Impact of the parasitic photothermal effect on the performance of an optomechanical nanoantenna for NIR radiation detection

  • Khosh Maram, Daniyal|||0000-0001-8310-3504
  • Garcia-Garcia, Joan J|||0000-0002-7825-0224
  • Cartoixà, Xavier|||0000-0003-1905-5979
  • Abadal, Gabriel|||0000-0002-6380-4298
This paper investigates the impact of the opto-thermomechanical (OTM) parasitic response of an optomechanical nanoantenna on the main opto-electromechanical (OEM) transduction mechanism involved in the near-infrared (NIR) radiation detection. Through comprehensive experimental and computational analyses, we have modelled how this parasitic effect overlaps with the desired opto-electromechanical response. Utilizing COMSOL Multiphysics, we have simulated thermal, optical, and mechanical interactions within the optomechanical structure. Our findings indicate that the parasitic OTM effect significantly influences the device's mechanical deflection, driven primarily by localized heating at the microcantilever's free end. Experimental data validates simulation results, demonstrating the parasitic response's dominance over the intended functionality. A figure of merit (FoM), defined as the ratio between the transducing OEM signal over the parasitic OTM response has been defined to quantify the performance of the optomechanical nanoantenna detector, as well as to propose geometry design improvements to optimize this performance.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A Scalable Compact Model for the Static Drain Current of Graphene FETs

  • Mavredakis, Nikolaos|||0000-0003-3630-9416
  • Pacheco-Sanchez, Anibal|||0000-0002-0897-0605
  • Txoperena, Oihana
  • Torres, Elias
  • Jiménez, David|||0000-0002-8148-198X
The main target of this article is to propose for the first time a physics-based continuous and symmetric compact model that accurately captures I-V experimental dependencies induced by geometrical scaling effects for graphene field-effect transistor (GFET) technologies. Such a scalable model is an indispensable ingredient for the boost of large-scale GFET applications, as it has been already proved in solid industry-based CMOS technologies. Dependencies of the physical model parameters on channel dimensions are thoroughly investigated, and semi-empirical expressions are derived, which precisely characterize such behaviors for an industry-based GFET technology, as well as for others developed in research laboratory. This work aims at the establishment of the first industry standard GFET compact model that can be integrated in circuit simulation tools and, hence, can contribute to the update of GFET technology from the research level to massive industry production.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Static and small-signal modeling of radiofrequency hexagonal boron nitride switches

  • Pacheco-Sanchez, Anibal|||0000-0002-0897-0605
  • Jordan-Garcia, Omar
  • Ramirez-Garcia, Eloy|||0000-0002-2594-621X
  • Jiménez, David|||0000-0002-8148-198X
A first modeling approximation of the general performance of radiofrequency (RF) switches based on hexagonal boron nitride (hBN), a two-dimensional (2D) dielectric material is presented. The I-V characteristics intrinsic and extrinsic impedance parameters, the return loss, insertion loss and isolation of RF 2D switches fabricated with hBN are described here by a equivalent circuit models. Straightforward analytical expressions are obtained. In contrast to conventional switches, the unique RF performance of the hBN switch, at ON-state, i.e., a direct improvement with frequency of the insertion loss, is accurately described by considering a capacitor in the intrinsic part of the model. The latter is suggested to be related to storaged charge during the resistive switching mechanism. The highest mean relative error obtained between modeling and measurements of the return loss is of 7.6% with the approach presented here which overcomes the 42.5% of difference obtained with a previous model with an incomplete intrinsic device description.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Characterization Methodology for Voltage-Dependent Mobility of Charge Carriers in Graphene FETs Using Single-Device Microwave Measurements

  • Ribero-Figueroa, Xiomara|||0000-0001-8500-1106
  • Pacheco-Sanchez, Anibal|||0000-0002-0897-0605
  • Mansouri, Aida
  • Kumar, Pankaj
  • Habibpour, Omid|||0000-0002-0153-0308
  • Zirath, Herbert|||0000-0002-5721-4793
  • Anzi, Luca|||0000-0002-8212-1337
  • Zurutuza, Amaia|||0000-0001-6376-0224
  • Sordan, Roman|||0000-0001-7373-0643
  • Jiménez, David|||0000-0002-8148-198X
  • Pasadas, Francisco|||0000-0003-3992-9864
  • Torres-Torres, Reydezel|||0000-0003-0906-4038
This work proposes a methodology entirely based on processing S-parameters to determine the gate-to-source voltage-dependent mobility of charge carriers in the graphene field-effect transistor channel, without requiring any information about the material properties. Furthermore, regressions from experimental data of transistor arrays with different geometries are not required, thus avoiding uncertainties related to process variations and device-to-device measurement conditions. Hence, one key advantage of this method is its applicability to analyze the performance of different devices under the same operating conditions, or the performance of a single device under varying conditions. As part of the methodology, the effects of the parasitic series resistances associated with the source and drain access paths are considered, thereby overcoming the well-known disadvantage of direct-current methods, where the corresponding de-embedding is cumbersome. This method has been used to determine the carrier mobility in graphene within a gate-to-source voltage range, starting from the Dirac voltage and extending to the region where electron conduction dominates. A small-signal model with the extracted parameter values shows an excellent agreement with the experimental S-parameters up to 20 GHz for the dynamic response of different devices, including two devices that have not been used during parameter extraction. Throughout the development and application of the proposal, a mobility model accounting for the degradation caused by the transverse electric field has been considered.
Dipòsit Digital de Documents de la UAB
Publicación Artículo de revisión (ReviewArticle)

Exploiting Ambipolarity in Graphene Field-Effect Transistors for Novel Designs on High-Frequency Analog Electronics

  • Pasadas, Francisco|||0000-0003-3992-9864
  • Medina-Rull, Alberto|||0000-0003-4691-0328
  • Garcia Ruiz, Francisco J.|||0000-0003-4659-2454
  • Ramos Silva, Javier Noé|||0000-0002-7644-6215
  • Pacheco-Sanchez, Anibal|||0000-0002-0897-0605
  • Pardo, Mari Carmen
  • Toral-Lopez, Alejandro|||0000-0001-5612-0536
  • Godoy Medina, Andres|||0000-0002-3014-8765
  • Ramirez-Garcia, Eloy|||0000-0002-2594-621X
  • Jiménez, David|||0000-0002-8148-198X
  • Marin, Enrique G.|||0000-0002-0302-3764
Exploiting ambipolar electrical conductivity based on graphene field-effect transistors has raised enormous interest for high-frequency (HF) analog electronics. Controlling the device polarity, by biasing the graphene transistor around the vertex of the V-shaped transfer curve, enables to redesign and highly simplify conventional analog circuits, and simultaneously to seek for multifunctionalities, especially in the HF domain. This study presents new insights for the design of different HF applications such as power amplifiers, mixers, frequency multipliers, phase shifters, and modulators that specifically leverage the inherent ambipolarity of graphene-based transistors.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Time derivatives of weak values

  • Oriols, Xavier|||0000-0003-2181-4284
The time derivative of a physical property often gives rise to another meaningful property. Since weak values provide empirical insights that cannot be derived from expectation values, this paper explores what physical properties can be obtained from the time derivative of weak values. It demonstrates that, in general, the time derivative of a weak value that is invariant under an electromagnetic gauge transformation is neither a weak value nor a gauge-invariant quantity. Left- and right-hand time derivatives of a weak value are defined, and two necessary and sufficient conditions are presented to ensure that they are also gauge-invariant weak values. Finite-difference approximations of the left- and right-hand time derivatives of weak values are also presented, yielding results that match the theoretical expressions when these are gauge invariant. With these definitions, a local Ehrenfest-like theorem can be derived, giving a natural interpretation for the time derivative of weak values. Notably, a single measured weak value of the system's position provides information about two additional unmeasured weak values: the system's local velocity and acceleration, through the first- and second-order time derivatives of the initial weak value, respectively. These findings also offer guidelines for experimentalists to translate the weak value theory into practical laboratory setups, paving the way for innovative quantum technologies. An example illustrates how the electromagnetic field can be determined at specific positions and times from the first- and second-order time derivatives of a weak value of position.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Tuning fork optomechanical NIR antenna with integrated optical transmission line

  • Khosh Maram, Daniyal|||0000-0001-8310-3504
  • Borrisé, Xavier|||0000-0002-6491-4763
  • Garcia-Garcia, Joan J|||0000-0002-7825-0224
  • Vandenbosch, Guy A.E.
  • Cartoixà, Xavier|||0000-0003-1905-5979
  • Abadal, Gabriel|||0000-0002-6380-4298
We present a novel optomechanical antenna design that directly converts near-infrared (λ=1.55 μm) light into mechanical motion using a tuning fork architecture with an integrated optical transmission line (OTL). The design consists of two parallel nanocantilever arms, made of gold-coated silicon nitride, forming a lateral tuning fork, with a plasmonic nanodipole antenna at the free end. Upon focused NIR laser illumination, our simulation results indicate that the nanodipole's feed gap concentrates the optical field and induces an oscillating voltage across the gap. This produces a strong DC electrostatic attraction between the tuning fork arms, causing an in-plane deflection. The integrated coplanar optical transmission line significantly enhances the antenna's performance by improving impedance matching, leading to nearly an order-of-magnitude higher gap voltage compared to designs without OTL. We verified the static mechanical response using COMSOL multiphysics simulations. An optimized design exhibits a lateral displacement up to 24.6 nm at 8 mW optical power, which corresponds to a responsivity of 3 nm/mW at 1.55 μm, outperforming previous NIR optomechanical transducers.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A Simple Understanding of Quantum Electrodynamics Using Bohmian Trajectories, Detecting Non-Ontic Photons

  • Seoane Martinez, Juan Jose
  • Benali, Abdelilah
  • Oriols, Xavier|||0000-0003-2181-4284
The use of Bohmian mechanics as a practical tool for modeling non-relativistic quantum phenomena of matter provides clear evidence of its success, not only as a way to interpret the foundations of quantum mechanics, but also as a computational framework. In the literature, it is frequently argued that such a realistic view-based on deterministic trajectories-cannot account for phenomena involving the "creation" and "annihilation" of photons. In this paper, by revisiting and rehabilitating earlier proposals, we show how quantum optics can be modeled using Bohmian trajectories for electrons in physical space, together with well-defined electromagnetic fields evolving in time. By paying special attention to an experimental scenario demonstrating partition noise for photons, and to how the Born rule emerges in this context, the paper pursues two main goals. First, it validates the use of this simple Bohmian framework for pedagogical and computational purposes in understanding and visualizing quantum electrodynamics phenomena. Second, given that measurements are ultimately indicated on matter pointers, it clarifies what it means to measure photon or electromagnetic-field properties, even when they are considered non-ontic elements.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reliably straining suspended van der Waals heterostructures

  • Nazzari, Daniele
  • Genser, Jakob
  • Sistani, Masiar
  • Bartmann, Maximilian G.
  • Cartoixà, Xavier
  • Rurali, Riccardo
  • Weber, Walter M.
  • Lugstein, Alois
2D materials provide a rapidly expanding platform for the observation of novel physical phenomena and for the realization of cutting-edge optoelectronic devices. In addition to their peculiar individual characteristics, 2D materials can be stacked into complex van der Waals heterostructures, greatly expanding their potential. Moreover, thanks to their excellent stretchability, strain can be used as a powerful control knob to tune or boost many of their properties. Here, we present a novel method to reliably and repeatedly apply a high uniaxial tensile strain to suspended van der Waals heterostructures. The reported device is engineered starting from a silicon-on-insulator substrate, allowing for the realization of suspended silicon beams that can amplify the applied strain. The strain module functionality is demonstrated using single- and double-layer graphene layers stacked with a multilayered hexagonal boron nitride flake. The heterostructures can be uniaxially strained, respectively, up to ∼ 1.2 % and ∼ 1.8 % ., This work was funded by the Austrian Science Fund (FWF), Project No. P29244-N27. We thank the center for micro- and nanostructures (ZMNS) at the TU Vienna for access to the cleanroom facilities. R.R. acknowledges the financial support by MCIN/AEI/10.13039/501100011033 under Grant No. PID2020-119777GB-I00 and the Severo Ochoa Centers of Excellence Program under Grant No. CEX2019-000917-S and by the Generalitat de Catalunya under Grant No. 2021 SGR 01519. X.C. acknowledges the financial support by Spain’s Ministerio de Ciencia Innovación y Universidades under Grant No. RTI2018-097876-B-C21 (MICIU/AEI/FEDER UE) and the Ministerio de Ciencia e Innovación under Grant No. PID2021-127840NB-I00 (MICINN/AEI/UE). The authors thankfully acknowledge the computer resources, technical expertise, and assistance provided by CESGA., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Design and fabrication of an opto-mechanical antenna in the NIR range

  • Maram, Daniyal Khosh
  • Borrisé, Xavier
  • Garcia-Garcia, Joan
  • Ruiz, Raul
  • Cartoixà, Xavier
  • Abadal Berini, Gabriel
In this study we present a novel device for the direct transduction of optical radiation in the near-infrared region into mechanical actuation, which is based on a plasmonic optical nanoantenna integrated in a microcantilever. We propose and demonstrate the feasibility of a simple fabrication process consisting in the nano-tailoring of a commercially available Atomic Force Microscope (AFM) cantilever by means of the Focused Ion Beam (FIB) milling technique. Furthermore, the comprehensive analysis of the device performance characteristics included in this work reveals the different sensitivity values of these characteristics to the fabrication process tolerances of the most relevant geometric design parameters., This work was funded by Spain's Ministerio de Ciencia e Innovación under Grant No. PID2021-127840NB-I00 (MICINN/AEI/FEDER, UE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Degradation of the ZT thermoelectric figure of merit in silicon when nanostructuring: From bulk to nanowires

  • Raya Moreno, Martí
  • Rurali, Riccardo
  • Cartoixà, Xavier
Since the landmark paper by Hicks and Dresselhaus [Phys. Rev. B 47, 16631(R) (1993)], there has been a general consensus that one-dimensional nanoscale conductors, i.e. nanowires, provide the long sought paradigm to implement the so-called phonon-glass electron-crystal material, which results in large improvements in the thermoelectric figure of merit ZT. Despite some encouraging—though isolated—experimental results, this idea has never been subjected to a rigorous scrutiny and the effect of the coupled dynamics of electrons and phonons has usually been oversimplified. To bypass these limitations, we have calculated the effective thermoelectric parameters for silicon nanowires (SiNWs) by iteratively solving the coupled electron-phonon Boltzmann transport equation (EPBTE) supplied with first-principles data. This allows for an unprecedented precision in determining the correct dependence of the thermoelectric parameters with system size; including, but not limited to, the figure of merit and its enhancement or degradation due to nanostructuring. Indeed, we demonstrate that the commonly used relaxation time approximation (RTA), or the uncoupled beyond the RTA (iterative) solution fail to describe the correct effect of nanostructuring on the thermoelectric properties and efficiency in SiNWs due to the strong contribution of phonon drag to the Seebeck coefficient, so that the use of fully coupled solution of the EPBTE is essential to obtain the correct effect of nanostructuring. Most importantly, we show that, contrarily to what commonly argued, resorting to NWs is not necessarily beneficial for ZT. Indeed, in a wide range of diameters nanostructuring diminishes the Seebeck coefficient faster than the decrease in thermal conductivity, due to the suppression of very long wavelength phonons responsible for the largest contribution to the phonon drag component of the Seebeck coefficient. This penalty to ZT can be mitigated if the NWs have a very rough surface, providing additional reduction to the thermal conductivity. Additionally, we demonstrate that our methodology provides improved data sets for an accurate determination of doping concentration in NWs through electrical-based inference and excellent agreement with the available experimental data., M.R-M and R.R acknowledge financial support from MCIN/AEI/10.13039/501100011033 under grant PID2020-119777GB-I00 , and the Severo Ochoa Centres of Excellence Program under grant CEX2019-000917-S , and by the Generalitat de Catalunya under grant 2021 SGR 01519 . X.C acknowledges financial support by Spain's Ministerio de Ciencia, Innovación y Universidades under Grant No. RTI2018-097876-B-C21 (MCIU/AEI/FEDER, UE), and Ministerio de Ciencia e Innovación under Grant No. PID2021-127840NB-I00 (MICINN/AEI/FEDER, UE). The authors thankfully acknowledge the computer resources, technical expertise and assistance provided by the Centro de Supercomputación de Galicia (CESGA)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Physics-Based Compact Modeling for the Drain Current Variability in Single-Layer Graphene FETs

  • Mavredakis, Nikolaos
  • Pacheco-Sánchez, Aníbal
  • Garcia Cortadella, Ramon
  • Guimerà-Brunet, Anton
  • Garrido, Jose A.
  • Jiménez, David
Copyright © 2025, IEEE, For the growth of emerging graphene field-effect transistor (GFET) technologies, a thorough characterization of on-wafer variability is required. Here, we report for the first time a physics-based compact model, which precisely describes the drain current ( ID ) fluctuations of monolayer GFETs. Physical mechanisms known to generate 1/f noise in transistors, such as carrier number and Coulomb scattering mobility fluctuations, are also revealed to cause ID variance. Such effects are considered in the model by being activated locally in the channel and the integration of their contributions from source to drain results in total variance. The proposed model is experimentally validated from a statistical population of three different-sized solution-gated (SG) GFETs from strong p- to strong n-type bias conditions. A series resistance ID variance model is also derived mainly contributing at high carrier densities., This work has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreements No GrapheneCore3 881603, from Ministerio de Ciencia, Innovación y Universidades under grant agreements RTI2018-097876-BC21(MCIU/AEI/FEDER, UE), FJC2020-046213-I and PID2021- 127840NB-I00 (MCIN/AEI/FEDER, UE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Plasmomechanical actuation at the nanoscale activated by NIR radiation

  • Maram, Daniyal Khosh
  • Borrisé, Xavier
  • Garcia-Garcia, Joan
  • Cartoixà, Xavier
  • Abadal Berini, Gabriel
The design of a plasmomechanical actuator based on an optical nanodipole antenna integrated in the overlapped free moving end of two micro-nanocantilevers is presented here. The static steady state deflection of the cantilevers, which defines the actuator response, is produced by means of two transduction phenomena activated by a continuous power NIR illumination: a desired opto-electromechanical (OEM) mechanism, in which the cantilevers are mutually attracted directly by the electrostatic force induced in the nanodipole feed gap, and a non-desired parasitic opto-thermomechanical (OTM) mechanism associated to the bimetallic effect induced by the optical heating of the structure. COMSOL Multiphysics has been chosen to carry out a design of the actuator based on an optimized optical response of the nanodipole antenna to the 1.55 μm wavelength radiation. COMSOL simulations have been also performed to evaluate the parasitic OTM response and the responsivity, defined as the OEM signal per unit radiation power. Predicted responsivity values of 0.67 nm/mW are of the same order of magnitude as in similar state-of-the-art transducers., This work was funded by Spain’s Ministerio de Ciencia e Innovación under Grant No. PID2021-127840NB-I00 (MICINN/AEI/FEDER, UE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning fork optomechanical NIR antenna with integrated optical transmission line

  • Maram, Daniyal Khosh
  • Borrisé, Xavier
  • García-García, Joan
  • Vandenbosch, Guy A. E.
  • Cartoixà, Xavier
  • Abadal Berini, Gabriel
Data will be made available on request., We present a novel optomechanical antenna design that directly converts near-infrared (λ=1.55 μm) light into mechanical motion using a tuning fork architecture with an integrated optical transmission line (OTL). The design consists of two parallel nanocantilever arms, made of gold-coated silicon nitride, forming a lateral tuning fork, with a plasmonic nanodipole antenna at the free end. Upon focused NIR laser illumination, our simulation results indicate that the nanodipole’s feed gap concentrates the optical field and induces an oscillating voltage across the gap. This produces a strong DC electrostatic attraction between the tuning fork arms, causing an in-plane deflection. The integrated coplanar optical transmission line significantly enhances the antenna’s performance by improving impedance matching, leading to nearly an order-of-magnitude higher gap voltage compared to designs without OTL. We verified the static mechanical response using COMSOL multiphysics simulations. An optimized design exhibits a lateral displacement up to 24.6 nm at 8 mW optical power, which corresponds to a responsivity of 3 nm/mW at 1.55 μm, outperforming previous NIR optomechanical transducers., This work was funded by Spain’s Ministerio de Ciencia e Innovación under Grant No. PID2021–127840NB-I00 (MICINN/AEI/FEDER, UE) and Ministerio de Ciencia, Innovación y Universidades under Grant No. PID2024–161603NB-I00 (MICIU/ AEI / 10.13039/501100011033 / FEDER, UE)., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Three types of Landauer's erasure principle, a microscopic view

  • Oriols, Xavier|||0000-0003-2181-4284
  • Nikolić, Hrvoje
An important step to incorporate information in the second law of thermodynamics was done by Landauer, showing that the erasure of information implies an increase in heat. Most attempts to justify Landauer's erasure principle are based on thermodynamic argumentations. Here, using just the time-reversibility of classical microscopic laws, we identify three types of the Landauer's erasure principle depending on the relation between the two final environments: the one linked to a logical input 1 and the other to logical input 0. The strong type (which is the original Landauer's formulation) requires the final environments to be in thermal equilibrium. The intermediate type giving the entropy change of kln 2 occurs when the two final environments are identical macroscopic states. Finally, the weak Landauer's principle, providing information erasure with no entropy change, when the two final environments are macroscopically different. Even though the above results are formally valid for classical erasure gates, a discussion on their natural extension to quantum scenarios is presented. This paper strongly suggests that the original Landauer's principle (based on the assumption of thermalized environments) is fully reasonable for microelectronics, but it becomes less reasonable for future few-atoms devices working at THz frequencies. Thus, the weak and intermediate Landauer's principles, where the erasure of information is not necessarily linked to heat dissipation, are worth investigating.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Straightforward bias- and frequency-dependent small-signal model extraction for single-layer graphene FETs

  • Mavredakis, Nikolaos|||0000-0003-3630-9416
  • Pacheco-Sanchez, Anibal|||0000-0002-0897-0605
  • Wei, Wei
  • Pallecchi, Emiliano|||0000-0002-8682-7935
  • Happy, Henri|||0000-0003-2065-8080
  • Jiménez, David|||0000-0002-8148-198X
We propose an explicit small-signal graphene field-effect transistor (GFET) parameter extraction procedure based on a charge-based quasi-static model. The dependence of the small-signal parameters on both gate voltage and frequency is precisely validated by high-frequency (up to 18 GHz) on-wafer measurements from a 300 nm device. These parameters are studied simultaneously, in contrast to other works which focus exclusively on few. Efficient procedures have been applied to GFETs for the first time to remove contact and gate resistances from the Y-parameters. The use of these methods yields straightforward equations for extracting the small-signal model parameters, which is extremely useful for radio-frequency circuit design. Furthermore, we show for the first time experimental validation vs. both gate voltage and frequency of the intrinsic GFET non-reciprocal capacitance model. Accurate models are also presented for the gate voltage-dependence of the measured unity-gain and maximum oscillation frequencies as well as of the current and power gains.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Degradation of the ZT thermoelectric figure of merit in silicon when nanostructuring, From bulk to nanowires

  • Raya Moreno, Martí|||0000-0001-6190-9769
  • Rurali, Riccardo|||0000-0002-4086-4191
  • Cartoixà, Xavier|||0000-0003-1905-5979
Since the landmark paper by Hicks and Dresselhaus [Phys. Rev. B 47, 16631(R) (1993)], there has been a general consensus that one-dimensional nanoscale conductors, i.e. nanowires, provide the long sought paradigm to implement the so-called phonon-glass electron-crystal material, which results in large improvements in the thermoelectric figure of merit ZT. Despite some encouraging-though isolated-experimental results, this idea has never been subjected to a rigorous scrutiny and the effect of the coupled dynamics of electrons and phonons has usually been oversimplified. To bypass these limitations, we have calculated the effective thermoelectric parameters for silicon nanowires (SiNWs) by iteratively solving the coupled electron-phonon Boltzmann transport equation (EPBTE) supplied with first-principles data. This allows for an unprecedented precision in determining the correct dependence of the thermoelectric parameters with system size; including, but not limited to, the figure of merit and its enhancement or degradation due to nanostructuring. Indeed, we demonstrate that the commonly used relaxation time approximation (RTA), or the uncoupled beyond the RTA (iterative) solution fail to describe the correct effect of nanostructuring on the thermoelectric properties and efficiency in SiNWs due to the strong contribution of phonon drag to the Seebeck coefficient, so that the use of fully coupled solution of the EPBTE is essential to obtain the correct effect of nanostructuring. Most importantly, we show that, contrarily to what commonly argued, resorting to NWs is not necessarily beneficial for ZT. Indeed, in a wide range of diameters nanostructuring diminishes the Seebeck coefficient faster than the decrease in thermal conductivity, due to the suppression of very long wavelength phonons responsible for the largest contribution to the phonon drag component of the Seebeck coefficient. This penalty to ZT can be mitigated if the NWs have a very rough surface, providing additional reduction to the thermal conductivity. Additionally, we demonstrate that our methodology provides improved data sets for an accurate determination of doping concentration in NWs through electrical-based inference and excellent agreement with the available experimental data.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Resonant tunneling diodes in semiconductor microcavities, Modeling polaritonic features in the terahertz displacement current

  • Destefani, Carlos Fernando|||0000-0002-3399-4748
  • Villani, Matteo|||0000-0003-1315-7851
  • Cartoixà, Xavier|||0000-0003-1905-5979
  • Feiginov, Michael|||0000-0002-9589-6721
  • Oriols, Xavier|||0000-0003-2181-4284
We develop in this work a qualitative quantum electron transport model, in the strong light-matter coupling regime under dipole approximation, able to capture polaritonic signatures in the time-dependent electrical current. The effect of the quantized electromagnetic field in the displacement current of a resonant tunneling diode inside an optical cavity is analyzed. The original peaks of the bare electron transmission coefficient split into two new peaks due to the resonant electron-photon interaction, leading to coherent Rabi oscillations among the polaritonic states that are developed in the system in the strong coupling regime. This mimics known effects predicted by a Jaynes-Cummings model in closed systems and shows how a full quantum treatment of electrons and electromagnetic fields may open interesting paths for engineering new THz electron devices. The computational burden involved in the multi-time measurements of THz currents is tackled by invoking a Bohmian description of the light-matter interaction. We also show that the traditional static transmission coefficient used to characterize DC quantum electron devices has to be substituted by a new displacement current coefficient in high-frequency AC scenarios.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Design and fabrication of an opto-mechanical antenna in the NIR range

  • Khosh Maram, Daniyal|||0000-0001-8310-3504
  • Borrisé, Xavier|||0000-0002-6491-4763
  • Garcia-Garcia, Joan J|||0000-0002-7825-0224
  • Ruiz, Raul
  • Cartoixà, Xavier|||0000-0003-1905-5979
  • Abadal, Gabriel|||0000-0002-6380-4298
In this study we present a novel device for the direct transduction of optical radiation in the near-infrared region into mechanical actuation, which is based on a plasmonic optical nanoantenna integrated in a microcantilever. We propose and demonstrate the feasibility of a simple fabrication process consisting in the nano-tailoring of a commercially available Atomic Force Microscope (AFM) cantilever by means of the Focused Ion Beam (FIB) milling technique. Furthermore, the comprehensive analysis of the device performance characteristics included in this work reveals the different sensitivity values of these characteristics to the fabrication process tolerances of the most relevant geometric design parameters.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Reliably straining suspended van der Waals heterostructures

  • Nazzari, Daniele|||0000-0003-4267-3142
  • Genser, Jakob
  • Sistani, Masiar|||0000-0001-5730-234X
  • Bartmann, Maximilian G.|||0000-0002-9556-1550
  • Cartoixà, Xavier|||0000-0003-1905-5979
  • Rurali, Riccardo|||0000-0002-4086-4191
  • Weber, Walter M.|||0000-0001-9504-5671
  • Lugstein, Alois|||0000-0001-5693-4775
2D materials provide a rapidly expanding platform for the observation of novel physical phenomena and for the realization of cuttingedge optoelectronic devices. In addition to their peculiar individual characteristics, 2D materials can be stacked into complex van der Waals heterostructures, greatly expanding their potential. Moreover, thanks to their excellent stretchability, strain can be used as a powerful control knob to tune or boost many of their properties. Here, we present a novel method to reliably and repeatedly apply a high uniaxial tensile strain to suspended van der Waals heterostructures. The reported device is engineered starting from a silicon-on-insulator substrate, allowing for the realization of suspended silicon beams that can amplify the applied strain. The strain module functionality is demonstrated using singleand double-layer graphene layers stacked with a multilayered hexagonal boron nitride flake. The heterostructures can be uniaxially strained, respectively, up to ∼1.2% and ∼1.8%.