Pasar al contenido principal

NUEVAS DINAMICAS DE ELECTRONES Y FONONES PARA NANOTECNOLOGIAS EMERGENTES: APLICACION A HETEROESTRUCTURAS 2D VAN DER WAALS Y DISPOSITIVOS DE THZ

RTI2018-097876-B-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD AUTONOMA DE BARCELONA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 56
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Physics-based bias-dependent compact modeling of 1/f noise in single- to few-layer 2D-FETs

  • Mavredakis, Nikolaos|||0000-0003-3630-9416
  • Pacheco-Sanchez, Anibal|||0000-0002-0897-0605
  • Alam, Hasibul|||0000-0002-4923-0873
  • Guimerà Brunet, Anton|||0000-0003-1768-3293
  • Martinez, Javier
  • Garrido, Jose|||0000-0001-5621-1067
  • Akinwande, Deji|||0000-0001-7133-5586
  • Jiménez, David|||0000-0002-8148-198X
1/f noise is a critical figure of merit for the performance of transistors and circuits. For two-dimensional devices (2D-FETs), and especially for applications in the GHz range where short-channel FETs are required, the velocity saturation (VS) effect can result in the reduction of 1/f noise at high longitudinal electric fields. A new physics-based compact model has been for the first time introduced for single- to few-layer 2D-FETs in this study, precisely validating 1/f noise experiments for various types of devices. The proposed model mainly accounts for the measured 1/f noise bias dependence as the latter is defined by different physical mechanisms. Thus, analytical expressions are derived, valid in all regions of operation in contrast to conventional approaches available in the literature so far, accounting for carrier number fluctuation (ΔN), mobility fluctuation (Δμ) and contact resistance (ΔR) effects based on the underlying physics that rules these devices. The ΔN mechanism due to trapping/detrapping together with an intense Coulomb scattering effect dominates the 1/f noise from the medium to the strong accumulation region while Δμ has also been demonstrated to modestly contribute in the subthreshold region. ΔR can also be significant in a very high carrier density. The VS induced reduction of 1/f noise measurements at high electric fields was also remarkably captured by the model. The physical validity of the model can also assist in extracting credible conclusions when conducting comparisons between experimental data from devices with different materials or dielectrics.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Physics-Based Compact Modeling for the Drain Current Variability in Single-Layer Graphene FETs

  • Mavredakis, Nikolaos|||0000-0003-3630-9416
  • Pacheco-Sanchez, Anibal|||0000-0002-0897-0605
  • Garcia Cortadella, Ramon|||0000-0002-1506-6534
  • Guimerà Brunet, Anton|||0000-0003-1768-3293
  • Garrido, Jose|||0000-0001-5621-1067
  • Jiménez, David|||0000-0002-8148-198X
For the growth of emerging graphene field effect transistor (GFET) technologies, a thorough characterization of on-wafer variability is required. Here, we report for the first time a physics-based compact model, which precisely describes the drain current (ID) fluctuations of monolayer GFETs. Physical mechanisms known to generate 1/f noise in transistors, such as carrier number and Coulomb scattering mobility fluctuations, are also revealed to cause (ID) variance. Such effects are considered in the model by being activated locally in the channel and the integration of their contributions from source to drain results in total variance. The proposed model is experimentally validated from a statistical population of three different-sized solution-gated (SG) GFETs from strong p- to strong n-type bias conditions. A series resistance (ID) variance model is also derived mainly contributing at high carrier densities.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

The gate tunable 2D pn junction driven out-of-equilibrium

  • Chaves Romero, Ferney Alveiro|||0000-0001-9506-4485
  • Jiménez, David|||0000-0002-8148-198X
We have investigated the electrostatics and electronic transport of the gate tunable 2D pn junction by implementing a comprehensive physics-based simulator that self-consistently solves the 2D Poisson's equation coupled to the drift-diffusion current and continuity equations. The simulator considers the strong influence of the out-of-plane electric field through the gate dielectric and the presence of interface states. The impact of parameters such as gate capacitance, energy gap, and interface trap states density have been considered to model properties such as the depletion width, rectification factor, and depletion and diffusion capacitances. The present work opens the door to a wider exploration of potential advantages that gate tunable 2D pn junctions could bring in terms of figures of merit.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A Graphene Field-Effect Transistor Based Analogue Phase Shifter for High-Frequency Applications

  • Medina-Rull, Alberto|||0000-0003-4691-0328
  • Pasadas, Francisco|||0000-0003-3992-9864
  • Marin, Enrique G.|||0000-0002-0302-3764
  • Toral-Lopez, Alejandro|||0000-0001-5612-0536
  • Cuesta-López, Juan|||0000-0001-7905-9969
  • Godoy Medina, Andres|||0000-0002-3014-8765
  • Jiménez, David|||0000-0002-8148-198X
  • Garcia Ruiz, Francisco J.|||0000-0003-4659-2454
We present a graphene-based phase shifter for radio-frequency (RF) phase-array applications. The core of the designed phase-shifting system consists of a graphene field-effect transistor (GFET) used in a common source amplifier configuration. The phase of the RF signal is controlled by exploiting the quantum capacitance of graphene and its dependence on the terminal transistor biases. In particular, by independently tuning the applied gate-to-source and drain-to-source biases, we observe that the phase of the signal, in the super-high frequency band, can be varied nearly 200° with a constant gain of 2.5 dB. Additionally, if only the gate bias is used as control signal, and the drain is biased linearly dependent on the former (i.e., in a completely analogue operation), a phase shift of 85° can be achieved making use of just one transistor and keeping a gain of 0 dB with a maximum variation of 1.3 dB. The latter design can be improved by applying a balanced branch-line configuration showing to be competitive against other state-of-the-art phase shifters. This work paves the way towards the exploitation of graphene technology to become the core of active analogue phase shifters for high-frequency operation.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Non-quasi-static effects in graphene field-effect transistors under high-frequency operation

  • Pasadas, Francisco|||0000-0003-3992-9864
  • Jiménez, David|||0000-0002-8148-198X
We investigate the non-quasi-static (NQS) effects in graphene field-effect transistors (GFETs), which are relevant for the device operation at high frequencies as a result of significant carrier inertia. A small-signal NQS model is derived from the analytical solution of drift-diffusion equation coupled with the continuity equation, which can be expressed in terms of modified Bessel functions of the first kind. The NQS model can be conveniently simplified to provide an equivalent circuit of lumped elements ready to be used in standard circuit simulators. Taking into account only first-order NQS effects, accurate GFET-based circuit simulations up to several times the cutoff frequency (fT) can be performed. Notably, it reduces to the quasi-static (QS) approach when the operation frequency is below ~fT/4. To validate the NQS model, we have compared its outcome against simulations based on a multisegment approach consisting of breaking down the channel length in N equal segments described by the QS model each one.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Contact resistance extraction of graphene FET technologies based on individual device characterization

  • Pacheco-Sanchez, Anibal|||0000-0002-0897-0605
  • Feijoo, Pedro Carlos|||0000-0002-7653-4573
  • Jiménez, David|||0000-0002-8148-198X
Straightforward contact resistance extraction methods based on electrical device characteristics are described and applied here to graphene field-effect transistors from different technologies. The methods are an educated adaptation of extraction procedures originally developed for conventional transistors by exploiting the drift-diffusion-like transport in graphene devices under certain bias conditions. In contrast to other available approaches for contact resistance extraction of graphene transistors, the practical methods used here do not require either the fabrication of dedicated test structures or internal device phenomena characterization. The methodologies are evaluated with simulation-based data and applied to fabricated devices. The extracted values are close to the ones obtained with other more intricate methodologies. Bias-dependent contact and channel resistances studies, bias-dependent high-frequency performance studies and contact engineering studies are enhanced and evaluated by the extracted contact resistance values.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A Scalable Compact Model for the Static Drain Current of Graphene FETs

  • Mavredakis, Nikolaos|||0000-0003-3630-9416
  • Pacheco-Sanchez, Anibal|||0000-0002-0897-0605
  • Txoperena, Oihana
  • Torres, Elias
  • Jiménez, David|||0000-0002-8148-198X
The main target of this article is to propose for the first time a physics-based continuous and symmetric compact model that accurately captures I-V experimental dependencies induced by geometrical scaling effects for graphene field-effect transistor (GFET) technologies. Such a scalable model is an indispensable ingredient for the boost of large-scale GFET applications, as it has been already proved in solid industry-based CMOS technologies. Dependencies of the physical model parameters on channel dimensions are thoroughly investigated, and semi-empirical expressions are derived, which precisely characterize such behaviors for an industry-based GFET technology, as well as for others developed in research laboratory. This work aims at the establishment of the first industry standard GFET compact model that can be integrated in circuit simulation tools and, hence, can contribute to the update of GFET technology from the research level to massive industry production.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Accuracy of Y-function methods for parameters extraction of two-dimensional FETs across different technologies

  • Pacheco-Sanchez, Anibal|||0000-0002-0897-0605
  • Jiménez, David|||0000-0002-8148-198X
The accuracy of contact resistance values of two-dimensional (2D) field-effect transistors extracted with the Y-function considering the impact of the intrinsic mobility degradation is evaluated here. The difference between methodologies that take this factor into account and ignore it is pointed out by a detailed analysis of the approximations of the transport model used for each extraction. In contrast to the oftenly used approach where the intrinsic mobility degradation is neglected, a Y-function-based method considering a more complete transport model yields contact resistance values similar to reference values obtained by other intricate approaches. The latter values are more suitable also to describe experimental data of 2D devices of different technologies. The intrinsic mobility degradation factor of 2D transistors is experimentally characterised for the first time and its impact on the device performance is described and evaluated.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Compact Modeling of pH-Sensitive FETs Based on 2-D Semiconductors

  • Grour, Tarek El|||0000-0003-2963-7104
  • Pasadas, Francisco|||0000-0003-3992-9864
  • Medina-Rull, Alberto|||0000-0003-4691-0328
  • Najari, Montassar|||0000-0002-5382-8528
  • Marin, Enrique G.|||0000-0002-0302-3764
  • Toral-Lopez, Alejandro|||0000-0001-5612-0536
  • Garcia Ruiz, Francisco J.|||0000-0003-4659-2454
  • Godoy Medina, Andres|||0000-0002-3014-8765
  • Jiménez, David|||0000-0002-8148-198X
  • Mir, Lassaad El
We present a physics-based circuit-compatible model for pH-sensitive field-effect transistors based on 2-D materials. The electrostatics along the electrolyte-gated 2-D-semiconductor stack is treated by solving the Poisson equation, including the site-binding model and the Gouy-Chapman-Stern approach, while the carrier transport is described by the drift-diffusion theory. The proposed model is provided in an analytical form and then implemented in Verilog-A, making it compatible with standard technology computer-aided design tools employed for circuit simulation. The model is benchmarked against two experimental transition-metal-dichalcogenide (MoS2 and ReS2)-based ion sensors, showing excellent agreement when predicting the drain current, threshold voltage shift, and current/voltage sensitivity measurements for different pH concentrations.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Static and small-signal modeling of radiofrequency hexagonal boron nitride switches

  • Pacheco-Sanchez, Anibal|||0000-0002-0897-0605
  • Jordan-Garcia, Omar
  • Ramirez-Garcia, Eloy|||0000-0002-2594-621X
  • Jiménez, David|||0000-0002-8148-198X
A first modeling approximation of the general performance of radiofrequency (RF) switches based on hexagonal boron nitride (hBN), a two-dimensional (2D) dielectric material is presented. The I-V characteristics intrinsic and extrinsic impedance parameters, the return loss, insertion loss and isolation of RF 2D switches fabricated with hBN are described here by a equivalent circuit models. Straightforward analytical expressions are obtained. In contrast to conventional switches, the unique RF performance of the hBN switch, at ON-state, i.e., a direct improvement with frequency of the insertion loss, is accurately described by considering a capacitor in the intrinsic part of the model. The latter is suggested to be related to storaged charge during the resistive switching mechanism. The highest mean relative error obtained between modeling and measurements of the return loss is of 7.6% with the approach presented here which overcomes the 42.5% of difference obtained with a previous model with an incomplete intrinsic device description.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Input-Referred Low-Frequency Noise Analysis for Single-Layer Graphene FETs

  • Mavredakis, Nikolaos|||0000-0003-3630-9416
  • Jiménez, David|||0000-0002-8148-198X
The bias dependence of input-referred low-frequency noise (LFN), SVG, is a considerable facet for RF circuit design. SVG was considered constant in CMOS but this was contradicted by recent experimental and theoretical studies. In this brief, the behavior of SVG is investigated for single-layer graphene transistors (GFETs) based on a recently established physics-based compact model. A minimum of SVG is recorded at the bias point where transconductance is maximum which coincides with the peak of the well-known M-shape of the normalized output LFN; the model precisely captures this trend. Mobility fluctuation effect increases SVG toward lower currents near charge neutrality point (CNP), while carrier number fluctuation and series resistance effects mostly contribute away from CNP; thus, SVG obtains a parabolic shape versus gate voltage similar to CMOS devices.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Experimental Observation and Modeling of the Impact of Traps on Static and Analog/HF Performance of Graphene Transistors

  • Pacheco-Sanchez, Anibal|||0000-0002-0897-0605
  • Mavredakis, Nikolaos|||0000-0003-3630-9416
  • Feijoo, Pedro Carlos|||0000-0002-7653-4573
  • Wei, Wei
  • Pallecchi, Emiliano|||0000-0002-8682-7935
  • Happy, Henri|||0000-0003-2065-8080
  • Jiménez, David|||0000-0002-8148-198X
The trap-induced hysteresis on the performance of a graphene field-effect transistor is experimentally diminished here by applying consecutive gate-to-source voltage pulses of opposing polarity. This measurement scheme is a practical and suitable approach to obtain reproducible device characteristics. Trap-affected and trap-reduced experimental data enable a discussion regarding the impact of traps on static and dynamic device performance. An analytical drain current model calibrated with the experimental data enables the study of the trap effects on the channel potential within the device. High-frequency (HF) figures of merit and the intrinsic gain of the device obtained from both experimental and synthetic data with and without hysteresis show the importance of considering the generally overlooked impact of traps for analog and HF applications.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Unveiling the impact of the bias-dependent charge neutrality point on graphene based multi-transistor applications

  • Pasadas, Francisco|||0000-0003-3992-9864
  • Medina-Rull, Alberto|||0000-0003-4691-0328
  • Feijoo, Pedro Carlos|||0000-0002-7653-4573
  • Pacheco-Sanchez, Anibal|||0000-0002-0897-0605
  • Marin, Enrique G.|||0000-0002-0302-3764
  • Garcia Ruiz, Francisco J.|||0000-0003-4659-2454
  • Rodriguez, Noel|||0000-0002-6032-6921
  • Godoy Medina, Andres|||0000-0002-3014-8765
  • Jiménez, David|||0000-0002-8148-198X
The Dirac voltage of a graphene field-effect transistor (GFET) stands for the gate bias that sets the charge neutrality condition in the channel, thus resulting in a minimum conductivity. Controlling its dependence on the terminal biases is crucial for the design and optimization of radio-frequency applications based on multiple GFETs. However, the previous analysis of such dependence carried out for single devices is uncomplete and if not properly understood could result in circuit designs with poor performance. The control of the Dirac point shift (DPS) is particularly important for the deployment of graphene-based differential circuit topologies where keeping a strict symmetry between the electrically balanced branches is essential for exploiting the advantages of such topologies. This note sheds light on the impact of terminal biases on the DPS in a real device and sets a rigorous methodology to control it so to eventually optimize and exploit the performance of radio-frequency applications based on GFETs.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

An Extraction Method for Mobility Degradation and Contact Resistance of Graphene Transistors

  • Pacheco-Sanchez, Anibal|||0000-0002-0897-0605
  • Mavredakis, Nikolaos|||0000-0003-3630-9416
  • Feijoo, Pedro Carlos|||0000-0002-7653-4573
  • Jiménez, David|||0000-0002-8148-198X
The intrinsic mobility degradation coefficient, contact resistance, and the transconductance parameter of graphene field-effect transistors (GFETs) are extracted for different technologies by considering a novel transport model embracing mobility degradation effects within the charge channel control description. By considering the mobility degradation-based model, a straightforward extraction methodology, not provided before, is enabled by applying the concept of the well-known Y -function to the I - V device characteristics. The method works regardless of the gate device architecture. An accurate description of experimental data of fabricated devices is achieved with the underlying transport equation by using the extracted parameters. An evaluation of the channel resistance, enabled by the extracted parameters here, has also been provided.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Experimental demonstration of the suppression of optical phonon splitting in 2D materials by Raman spectroscopy

  • De Luca, Marta
  • Cartoixà, Xavier
  • Indolese, David I.
  • Martín-Sánchez, Javier
  • Watanabe, Kenji
  • Taniguchi, Takashi
  • Schönenberger, Christian
  • Trotta, Rinaldo
  • Rurali, Riccardo
  • Zardo, Ilaria
Raman spectroscopy is one of the most extended experimental techniques to investigate thin-layered 2D materials. For a complete understanding and modeling of the Raman spectrum of a novel 2D material, it is often necessary to combine the experimental investigation to density functional theory calculations. We provide the experimental proof of the fundamentally different behavior of polar 2D vs 3D systems regarding the effect of the dipole − dipole interactions, which in 2D systems ultimately lead to the absence of optical phonons splitting, otherwise present in 3D materials. We demonstrate that non-analytical corrections (NACs) should not be applied to properly model the Raman spectra of few-layered 2D materials, such as WSe2 and h-BN, corroborating recent theoretical predictions (Sohier et al 2017 Nano Lett. 17 3758–63). Our findings are supported by measurements performed on tilted samples that allow increasing the component of photon momenta in the plane of the flake, thus unambiguously setting the direction of an eventual NAC. We also investigate the influence of the parity of the number of layers and of the type of layer-by-layer stacking on the effect of NACs on the Raman spectra., I Z acknowledges the Swiss National Science Foundation research grant (Project Grant No. 200021_165784). M D L acknowledges support from the Swiss National Science Foundation Ambizione grant (Grant No. PZ00P2_179801). R R acknowledges support from the Ministerio de Economía, Industria y Competitividad (MINECO) under grant FEDER-MAT2017-90024-P and the Severo Ochoa Centres of Excellence Program under grant SEV-2015-0496 and by the Generalitat de Catalunya under Grant Nos. 2017 SGR 1506. X C acknowledges financial support by the Ministerio de Economía, Industria y Competitividad under grant TEC2015-67462-C2-1-R (MINECO/FEDER), the Ministerio de Ciencia, Innovación y Universidades under Grant No. RTI2018-097876-B-C21 (MCIU/AEI/FEDER, UE), and the EU Horizon2020 research and innovation program under Grant No. GrapheneCore2: 785219. C S and D I acknowledge support by the Swiss Nanoscience Institute (SNI), the ERC project TopSupra (787414), the European Union Horizon 2020 research and innovation program under grant agreement No. 785219 (Graphene Flagship), the Swiss National Science Foundation and the Swiss NCCR QSIT. J.M.-S. acknowledges support through a Clarín Marie Curie-COFUND grant from the Government of the Principality of Asturias and the EU (PA-18-ACB17-29), and the Ramón y Cajal Program (RYC2018-026196-I) from the Government of Spain. R T acknowledges support by European Union's Horizon 2020 research and innovation programme (SPQRel grant agreement no. 679183). K W and T T acknowledge support from the Elemental Strategy Initiative conducted by the MEXT, Japan and the CREST(JPMJCR15F3), JST., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

New insights in the lattice dynamics of monolayers, bilayers, and trilayers of WSe2 and unambiguous determination of few-layer-flakes' thickness

  • De Luca, Marta
  • Cartoixà, Xavier
  • Martín-Sánchez, Javier
  • López Suárez, Miquel
  • Trotta, Rinaldo
  • Rurali, Riccardo
  • Zardo, Ilaria
Among the most common few-layers transition metal dichalcogenides (TMDs), WSe2 is the most challenging material from the lattice dynamics point of view. Indeed, for a long time the main two phonon modes (A1g and ) have been wrongly assigned. In the last few years, these two modes have been properly interpreted, and their quasi-degeneracy in the monolayer has been used for its identification. In this work, we show that this approach has a limited validity and we propose an alternative, more general approach, based on multi-phonon bands. Moreover, we show and interpret all the peaks (about 40) appearing in the Raman spectra of monolayers, bilayers, and trilayers of WSe2 by combining experimental wavelength- and polarization-dependent Raman studies with density-functional theory calculations providing the phonon dispersions, the polarization-resolved first-order Raman spectra, and the two-phonon density of states. This complete study not only offers a method to distinguish between monolayers, bilayers, and trilayers with no need of optical images and atomic force microscopy, but it also sheds light on the interpretation of single and multi-phonon bands appearing in the inelastic light scattering experiments of layered WSe2; some of these bands were never observed before, and some were observed and uncertainly assigned. We promote the full understanding of the lattice dynamics of this material that is crucial for the realization of optoelectronics devices and of novel phononic metamaterials, such as TMDs superlattices., This project has received funding from the Swiss National Science Foundation research grant (Project Grant No. 200021_165784). MDL acknowledges support from the Swiss National Science Foundation Ambizione grant (Grant No. PZ00P2_179801). RR acknowledges financial support by the Ministerio de Economía, Industria y Competitividad (MINECO) under grant FEDER-MAT2017-90024-P and the Severo Ochoa Centres of Excellence Program under grant SEV-2015-0496 and by the Generalitat de Catalunya under Grant No. 2017 SGR 1506. XC acknowledges financial support by the Ministerio de Economía, Industria y Competitividad under grant TEC2015-67462-C2-1-R (MINECO/FEDER), the Ministerio de Ciencia, Innovación y Universidades under Grant No. RTI2018-097876-B-C21 (MCIU/AEI/FEDER, UE), and the EU Horizon2020 research and innovation program under Grant No. GrapheneCore2 785219. MLS is funded through a Juan de la Cierva fellowship. JM-S acknowledges support through the Clarín Programme from the Government of the Principality of Asturias and a Marie Curie-COFUND European Grant (PA-18-ACB17-29). RT Acknowledges support by European Union's Horizon 2020 research and innovation programme (SPQRel Grant Agreement No. 679183)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bias dependent variability of low-frequency noise in single-layer graphene FETs

  • Mavredakis, Nikolaos
  • Garcia Cortadella, Ramon
  • Illa, Xavi
  • Schäfer, Nathan
  • Bonaccini Calia, Andrea
  • Guimerà-Brunet, Anton
  • Garrido, Jose A.
  • Jiménez, David
Low-frequency noise (LFN) variability in graphene transistors (GFETs) is for the first time researched in this work under both experimental and theoretical aspects. LFN from an adequate statistical sample of long-channel solution-gated single-layer GFETs is measured in a wide range of operating conditions while a physics-based analytical model is derived that accounts for the bias dependence of LFN variance with remarkable performance. LFN deviations in GFETs stem from the variations of the parameters of the physical mechanisms that generate LFN, which are the number of traps (Ntr) for the carrier number fluctuation effect (ΔN) due to trapping/detrapping process and the Hooge parameter (αH) for the mobility fluctuations effect (Δμ). ΔN accounts for an M-shape of normalized LFN variance versus gate bias with a minimum at the charge neutrality point (CNP) as it was the case for normalized LFN mean value while Δμ contributes only near the CNP for both variance and mean value. Trap statistical nature of the devices under test is experimentally shown to differ from classical Poisson distribution noticed at silicon-oxide devices, and this might be caused both by the electrolyte interface in GFETs under study and by the premature stage of the GFET technology development which could permit external factors to influence the performance. This not fully advanced GFET process growth might also cause pivotal inconsistencies affecting the scaling laws in GFETs of the same process., This work was funded by the European Union's Horizon 2020 research and innovation program under Grant Agreement No. GrapheneCore2 785219 and No. GrapheneCore3 881603, Marie Skłodowska-Curie Grant Agreement No. 665919 and Grant Agreement No. 732032 (BrainCom). We also acknowledge financial support by Spanish government under the projects TEC2015-67462-C2-1-R, RTI2018-097876-B-C21 (MCIU/AEI/FEDER, UE) and project 001-P-001702-GraphCat: Communitat Emergent de grafè a Catalunya, co-funded by FEDER within the framework of Programa Operatiu FEDER de Catalunya 2014–2020. The ICN2 is also supported by the Severo Ochoa Centres of Excellence programme, funded by the Spanish Research Agency (AEI, grant no. SEV-2017-0706)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tunable thermal conductivity of ternary alloy semiconductors from first-principles

  • Santiago, Francisco de
  • Raya Moreno, Martí
  • Miranda, Álvaro
  • Cruz Irisson, Miguel
  • Cartoixà, Xavier
  • Rurali, Riccardo
We compute the thermal conductivity, κ, of five representative III–V ternary alloys—namely InxGa1 − xAs, GaAs1 − xPx, InAs1 − xSbx, GaAs1 − xNx, and GaP1 − xNx—in the whole range of compositions, and in zincblende and wurtzite crystal phases, using a first-principles approach and solving the phonon Boltzmann transport equation beyond the relaxation time approximation. We discuss the tunability of the thermal conductivity with the composition of the alloy, reporting a steep decrease in the thermal conductivity, followed by a wide plateau and a steep increase common in systems with lattice disorder. We also test the approximation consisting in considering impurities at small values of x as bare mass defects, neglecting their chemical identity, and discuss its validity., We acknowledge financial support by the Ministerio de Economía, Industria y Competitividad (MINECO) under Grant FEDER-MAT2017-90024-P and the Severo Ochoa Centres of Excellence Program under Grant CEX2019-000917-S, the Ministerio de Ciencia, Innovación y Universidades under Grant No. RTI2018-097876-B-C21 (MCIU/AEI/FEDER, UE), and by the Generalitat de Catalunya under Grant No. 2017 SGR 1506. MRM is supported by the Ministerio de Educación, Cultura y Deporte through the program of Formación de Profesorado Universitario under Grant No. FPU2016/02565. AM and MCI acknowledge financial support through the multidisciplinary project IPN-SIP 2020-2093 and 2021-0236. FDS acknowledges financial support from scholarships CONACYT-Movilidad and BEIFI-IPN. We thank the Centro de Supercomputación de Galicia (CESGA) for the use of their computational resources. RR thanks Marta De Luca for useful discussions., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

3D Bi2Te3 Interconnected Nanowire Networks to Increase Thermoelectric Efficiency

  • Ruiz-Clavijo, Alejandra
  • Caballero-Calero, Olga
  • Manzano, Cristina V.
  • Maeder, Xavier
  • Beardo, Albert
  • Cartoixà, Xavier
  • Álvarez, F. Xavier
  • Martín-González, Marisol
3D interconnected nanowire scaffoldings are shown to increase the thermoelectric efficiency in comparison to similar diameter 1D nanowires and films grown under similar electrodeposition conditions. Bi2Te3 3D nanonetworks offer a reduction in thermal conductivity (¿T) while preserving the high electrical conductivity of the films. The reduction in ¿T is modeled using the hydrodynamic heat transport equation, and it can be understood as a heat viscosity effect due to the 3D nanostructuration. In addition, the Seebeck coefficient is twice that of nanowires and films, and up to 50% higher than in a single crystal. This increase is interpreted as a nonequilibrium effect that the geometry of the structure induces on the distribution function of the phonons, producing an enhanced phonon drag. These thermoelectric metamaterials have higher performance and are fabricated with large areas by a cost-effective method, which makes them suitable for up-scale production, The authors acknowledge financial support from Spanish Ministerio de Ciencia, Innovación y Universidades under Grants [PID2020-118430GB-100, RTI2018-097876-B-C22 (MCIU/AEI/FEDER, UE), and RTI2018-097876-B-C21 (MCIU/AEI/FEDER, UE)] and the CSIC project 2DMESES. Cristina V. Manzano acknowledges funding from “Atracción de Talento Investigador” de la Comunidad de Madrid, contract [2019-T1/IND-13541]. The authors ac knowledge the service from the MiNa Laboratory at IMN and funding from CM (project SpaceTec, [S2013/ICE2822]), MINECO (project [CSIC13-4E-1794]), and EU (FEDER, FSE).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Phonon Transport in GaAs and InAs Twinning Superlattices

  • López Güell, Kim
  • Forrer, Nicolas
  • Cartoixà, Xavier
  • Zardo, Ilaria
  • Rurali, Riccardo
Crystal phase engineering gives access to new types of periodic nanostructures, such as the so-called twinning superlattices, where the motif of the superlattice is determined by a periodic rotation of the crystal. Here, by means of atomistic nonequilibrium molecular dynamics calculations, we study to what extent these periodic systems can be used to alter phonon transport in a controlled way, similar to what has been predicted and observed in conventional superlattices based on heterointerfaces. We focus on twinning superlattices in GaAs and InAs and highlight the existence of two different transport regimes: in one, each interface behaves like an independent scatterer; in the other, a segment with a sufficiently large number of closely spaced interfaces is seen by propagating phonons as a metamaterial with its own thermal properties. In this second scenario, we distinguish the case where the phonon mean free path is smaller or larger than the superlattice segment, pointing out a different dependence of the thermal resistance with the number of interfaces., We acknowledge financial support by the Agencia Estatal de Investigación under grants FEDER-MAT2017-90024-P and RTI2018-097876-B-C21 (MCIU/AEI/FEDER, UE), the Severo Ochoa Centres of Excellence Program under grant CEX2019-000917-S, and the Generalitat de Catalunya under grant no. and 2017 SGR 1506. I.Z. acknowledges financial support by the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (grant agreement no. 756365) and from the Swiss National Science Foundation (project grant no. 184942). We thank the Centro de Supercomputación de Galicia (CESGA) for the use of their computational resources. R.R. thanks Kai Nordlund for useful discussions., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Physics-based bias-dependent compact modeling of 1/f noise in single- to few-layer 2D-FETs

  • Mavredakis, Nikolaos
  • Pacheco-Sánchez, Aníbal
  • Alam, Md Hasibul
  • Guimerà-Brunet, Anton
  • Martínez Aguilar, Javier
  • Garrido, Jose A.
  • Akinwande, Deji
  • Jiménez, David
1/f noise is a critical figure of merit for the performance of transistors and circuits. For two-dimensional devices (2D-FETs), and especially for applications in the GHz range where short-channel FETs are required, the velocity saturation (VS) effect can result in the reduction of 1/f noise at high longitudinal electric fields. A new physics-based compact model has been for the first time introduced for single- to few-layer 2D-FETs in this study, precisely validating 1/f noise experiments for various types of devices. The proposed model mainly accounts for the measured 1/f noise bias dependence as the latter is defined by different physical mechanisms. Thus, analytical expressions are derived, valid in all regions of operation in contrast to conventional approaches available in the literature so far, accounting for carrier number fluctuation (ΔN), mobility fluctuation (Δμ) and contact resistance (ΔR) effects based on the underlying physics that rules these devices. The ΔN mechanism due to trapping/detrapping together with an intense Coulomb scattering effect dominates the 1/f noise from the medium to the strong accumulation region while Δμ has also been demonstrated to modestly contribute in the subthreshold region. ΔR can also be significant in a very high carrier density. The VS induced reduction of 1/f noise measurements at high electric fields was also remarkably captured by the model. The physical validity of the model can also assist in extracting credible conclusions when conducting comparisons between experimental data from devices with different materials or dielectrics., This work was funded by the European Union's Horizon 2020 Research and innovation Program under Grant Agreement No. GrapheneCore3 881603, Marie Skłodowska-Curie Grant Agreement No. 665919 and Grant Agreement No. 732032 (BrainCom). We also acknowledge the financial support provided by the Spanish government under the projects RTI2018-097876-B-C21 (MCIU/AEI/FEDER, UE), PID2021-127840NB-I00 and FJC2020-046213-I. The work has also received partial funding from the European Union Regional Development Fund within the framework of the ERDF Operational Program of Catalonia 2014–2020 with the support of the Department de Recerca i Universitat, with a grant of 50% of the total eligible cost. GraphCAT project reference: 001-P-001702. The ICN2 is also supported by the Severo Ochoa Centres of Excellence programme, funded by the Spanish Research Agency (AEI, Grant No. SEV-2017-0706)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reliably straining suspended van der Waals heterostructures

  • Nazzari, Daniele
  • Genser, Jakob
  • Sistani, Masiar
  • Bartmann, Maximilian G.
  • Cartoixà, Xavier
  • Rurali, Riccardo
  • Weber, Walter M.
  • Lugstein, Alois
2D materials provide a rapidly expanding platform for the observation of novel physical phenomena and for the realization of cutting-edge optoelectronic devices. In addition to their peculiar individual characteristics, 2D materials can be stacked into complex van der Waals heterostructures, greatly expanding their potential. Moreover, thanks to their excellent stretchability, strain can be used as a powerful control knob to tune or boost many of their properties. Here, we present a novel method to reliably and repeatedly apply a high uniaxial tensile strain to suspended van der Waals heterostructures. The reported device is engineered starting from a silicon-on-insulator substrate, allowing for the realization of suspended silicon beams that can amplify the applied strain. The strain module functionality is demonstrated using single- and double-layer graphene layers stacked with a multilayered hexagonal boron nitride flake. The heterostructures can be uniaxially strained, respectively, up to ∼ 1.2 % and ∼ 1.8 % ., This work was funded by the Austrian Science Fund (FWF), Project No. P29244-N27. We thank the center for micro- and nanostructures (ZMNS) at the TU Vienna for access to the cleanroom facilities. R.R. acknowledges the financial support by MCIN/AEI/10.13039/501100011033 under Grant No. PID2020-119777GB-I00 and the Severo Ochoa Centers of Excellence Program under Grant No. CEX2019-000917-S and by the Generalitat de Catalunya under Grant No. 2021 SGR 01519. X.C. acknowledges the financial support by Spain’s Ministerio de Ciencia Innovación y Universidades under Grant No. RTI2018-097876-B-C21 (MICIU/AEI/FEDER UE) and the Ministerio de Ciencia e Innovación under Grant No. PID2021-127840NB-I00 (MICINN/AEI/UE). The authors thankfully acknowledge the computer resources, technical expertise, and assistance provided by CESGA., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Degradation of the ZT thermoelectric figure of merit in silicon when nanostructuring: From bulk to nanowires

  • Raya Moreno, Martí
  • Rurali, Riccardo
  • Cartoixà, Xavier
Since the landmark paper by Hicks and Dresselhaus [Phys. Rev. B 47, 16631(R) (1993)], there has been a general consensus that one-dimensional nanoscale conductors, i.e. nanowires, provide the long sought paradigm to implement the so-called phonon-glass electron-crystal material, which results in large improvements in the thermoelectric figure of merit ZT. Despite some encouraging—though isolated—experimental results, this idea has never been subjected to a rigorous scrutiny and the effect of the coupled dynamics of electrons and phonons has usually been oversimplified. To bypass these limitations, we have calculated the effective thermoelectric parameters for silicon nanowires (SiNWs) by iteratively solving the coupled electron-phonon Boltzmann transport equation (EPBTE) supplied with first-principles data. This allows for an unprecedented precision in determining the correct dependence of the thermoelectric parameters with system size; including, but not limited to, the figure of merit and its enhancement or degradation due to nanostructuring. Indeed, we demonstrate that the commonly used relaxation time approximation (RTA), or the uncoupled beyond the RTA (iterative) solution fail to describe the correct effect of nanostructuring on the thermoelectric properties and efficiency in SiNWs due to the strong contribution of phonon drag to the Seebeck coefficient, so that the use of fully coupled solution of the EPBTE is essential to obtain the correct effect of nanostructuring. Most importantly, we show that, contrarily to what commonly argued, resorting to NWs is not necessarily beneficial for ZT. Indeed, in a wide range of diameters nanostructuring diminishes the Seebeck coefficient faster than the decrease in thermal conductivity, due to the suppression of very long wavelength phonons responsible for the largest contribution to the phonon drag component of the Seebeck coefficient. This penalty to ZT can be mitigated if the NWs have a very rough surface, providing additional reduction to the thermal conductivity. Additionally, we demonstrate that our methodology provides improved data sets for an accurate determination of doping concentration in NWs through electrical-based inference and excellent agreement with the available experimental data., M.R-M and R.R acknowledge financial support from MCIN/AEI/10.13039/501100011033 under grant PID2020-119777GB-I00 , and the Severo Ochoa Centres of Excellence Program under grant CEX2019-000917-S , and by the Generalitat de Catalunya under grant 2021 SGR 01519 . X.C acknowledges financial support by Spain's Ministerio de Ciencia, Innovación y Universidades under Grant No. RTI2018-097876-B-C21 (MCIU/AEI/FEDER, UE), and Ministerio de Ciencia e Innovación under Grant No. PID2021-127840NB-I00 (MICINN/AEI/FEDER, UE). The authors thankfully acknowledge the computer resources, technical expertise and assistance provided by the Centro de Supercomputación de Galicia (CESGA)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Improved metal-graphene contacts for low-noise, high-density microtransistor arrays for neural sensing

  • Schaefer, Nathan
  • Garcia-Cortadella, Ramon
  • Calia, Andrea Bonaccini
  • Mavredakis, Nikolaos
  • Illa, Xavi
  • Masvidal Codina, Eduard
  • Cruz, Jose de la
  • Corro, Elena del
  • Rodríguez, Laura
  • Prats-Alfonso, Elisabet
  • Bousquet, Jessica
  • Martínez-Aguilar, Javier
  • Pérez-Marín, Antonio P.
  • Hébert, Clement
  • Villa, Rosa
  • Jiménez, David
  • Guimerà-Brunet, Anton
  • Garrido, Jose A.
Poor metal contact interfaces are one of the main limitations preventing unhampered access to the full potential of two-dimensional materials in electronics. Here we present graphene solution-gated field-effect-transistors (gSGFETs) with strongly improved linearity, homogeneity and sensitivity for small sensor sizes, resulting from ultraviolet ozone (UVO) contact treatment. The contribution of channel and contact region to the total device conductivity and flicker noise is explored experimentally and explained with a theoretical model. Finally, in-vitro recordings of flexible microelectrocorticography (μ-ECoG) probes were performed to validate the superior sensitivity of the UVO-treated gSGFET to brain-like activity. These results connote an important step towards the fabrication of high-density gSGFET μ-ECoG arrays with state-of-the-art sensitivity and homogeneity, thus demonstrating the potential of this technology as a versatile platform for the new generation of neural interfaces., Funding text 1 D.J. and N.M. also acknowledge financial support by Spain’s Ministerio de Ciencia, Innovación y Universidades under Grant No. RTI2018-097876-B-C21 ( MCIU/AEI/FEDER, UE ). Funding text 2 This work has made use of the Spanish ICTS Network MICRONANOFABS partially supported by MICINN and the ICTS ‘NANBIOSIS’, more specifically by the Micro-NanoTechnology Unit of the CIBER in Bioengineering, Biomaterials and Nanomedicine (CIBER-BBN) at the IMB-CNM. Funding text 3 The authors wish to thank Narcís Mestres-Andreu (ICMAB-Institut de Ciència de Materials de Barcelona) for giving us access to the ultraviolet ozone cleaner. This work has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreements Nº 785219 (Graphene Flagship Core Project 2) and Nº 732032 (BrainCom). We also acknowledge funding from Generalitat de Catalunya 2017 SGR 1426, and the 2DTecBio (FIS2017-85787-R) funded by Ministry of Science, Innovation and Universities, the State Research Agency (AEI) and the European Regional Development Fund (FEDER/UE). The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, funded by the Spanish Research Agency (AEI, grant no. SEV-2017-0706), and is funded by the CERCA programme/Generalitat de Catalunya. R.G.C. and A.B.C. are supported by the International PhD Programme La Caixa - Severo Ochoa (Programa Internacional de Becas “la Caixa"-Severo Ochoa). EDC acknowledges the Spanish MINECO Juan de la Cierva Fellowship JC-2015-25201. D.J. and N.M. also acknowledge financial support by Spain's Ministerio de Ciencia, Innovación y Universidades under Grant No. RTI2018-097876-B-C21 (MCIU/AEI/FEDER, UE). This work has made use of the Spanish ICTS Network MICRONANOFABS partially supported by MICINN and the ICTS ‘NANBIOSIS’, more specifically by the Micro-NanoTechnology Unit of the CIBER in Bioengineering, Biomaterials and Nanomedicine (CIBER-BBN) at the IMB-CNM. Funding text 4 This work has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreements Nº 785219 (Graphene Flagship Core Project 2) and Nº 732032 (BrainCom). We also acknowledge funding from Generalitat de Catalunya 2017 SGR 1426 , and the 2DTecBio ( FIS2017-85787-R ) funded by Ministry of Science, Innovation and Universities, the State Research Agency (AEI) and the European Regional Development Fund (FEDER/UE) . The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, funded by the Spanish Research Agency (AEI , grant no. SEV-2017-0706 ), and is funded by the CERCA programme/Generalitat de Catalunya. R.G.C. and A.B.C. are supported by the International PhD Programme La Caixa - Severo Ochoa (Programa Internacional de Becas “la Caixa"-Severo Ochoa). EDC acknowledges the Spanish MINECO Juan de la Cierva Fellowship JC-2015-25201 ., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Physics-Based Compact Modeling for the Drain Current Variability in Single-Layer Graphene FETs

  • Mavredakis, Nikolaos
  • Pacheco-Sánchez, Aníbal
  • Garcia Cortadella, Ramon
  • Guimerà-Brunet, Anton
  • Garrido, Jose A.
  • Jiménez, David
Copyright © 2025, IEEE, For the growth of emerging graphene field-effect transistor (GFET) technologies, a thorough characterization of on-wafer variability is required. Here, we report for the first time a physics-based compact model, which precisely describes the drain current ( ID ) fluctuations of monolayer GFETs. Physical mechanisms known to generate 1/f noise in transistors, such as carrier number and Coulomb scattering mobility fluctuations, are also revealed to cause ID variance. Such effects are considered in the model by being activated locally in the channel and the integration of their contributions from source to drain results in total variance. The proposed model is experimentally validated from a statistical population of three different-sized solution-gated (SG) GFETs from strong p- to strong n-type bias conditions. A series resistance ID variance model is also derived mainly contributing at high carrier densities., This work has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreements No GrapheneCore3 881603, from Ministerio de Ciencia, Innovación y Universidades under grant agreements RTI2018-097876-BC21(MCIU/AEI/FEDER, UE), FJC2020-046213-I and PID2021- 127840NB-I00 (MCIN/AEI/FEDER, UE)., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Large-signal model of 2DFETs, compact modeling of terminal charges and intrinsic capacitances

  • Pasadas, Francisco|||0000-0003-3992-9864
  • Marin, Enrique G.|||0000-0002-0302-3764
  • Toral-Lopez, Alejandro|||0000-0001-5612-0536
  • Garcia Ruiz, Francisco J.|||0000-0003-4659-2454
  • Godoy Medina, Andres|||0000-0002-3014-8765
  • Park, Saungeun
  • Akinwande, Deji|||0000-0001-7133-5586
  • Jiménez, David|||0000-0002-8148-198X
We present a physics-based circuit-compatible model for double-gated two-dimensional semiconductor-based field-effect transistors, which provides explicit expressions for the drain current, terminal charges, and intrinsic capacitances. The drain current model is based on the drift-diffusion mechanism for the carrier transport and considers Fermi-Dirac statistics coupled with an appropriate field-effect approach. The terminal charge and intrinsic capacitance models are calculated adopting a Ward-Dutton linear charge partition scheme that guarantees charge conservation. It has been implemented in Verilog-A to make it compatible with standard circuit simulators. In order to benchmark the proposed modeling framework we also present experimental DC and high-frequency measurements of a purposely fabricated monolayer MoS-FET showing excellent agreement between the model and the experiment and thus demonstrating the capabilities of the combined approach to predict the performance of 2DFETs.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Phonon transport across crystal-phase interfaces and twin boundaries in semiconducting nanowires

  • Carrete, Jesús|||0000-0003-0971-1098
  • López-Suárez, Miquel|||0000-0003-2338-277X
  • Raya Moreno, Martí|||0000-0001-6190-9769
  • Bochkarev, Anton S.
  • Royo Valls, Miquel|||0000-0001-7601-3754
  • Madsen, Georg Kent Hellerup|||0000-0001-9844-9145
  • Cartoixà, Xavier|||0000-0003-1905-5979
  • Mingo, Natalio
  • Rurali, Riccardo|||0000-0002-4086-4191
We combine state-of-the-art Green's-function methods and nonequilibrium molecular dynamics calculations to study phonon transport across the unconventional interfaces that make up crystal-phase and twinning superlattices in nanowires. We focus on two of their most paradigmatic building blocks: cubic (diamond/zinc blende) and hexagonal (lonsdaleite/wurtzite) polytypes of the same group-IV or III-V material. Specifically, we consider InP, GaP and Si, and both the twin boundaries between rotated cubic segments and the crystal-phase boundaries between different phases. We reveal the atomic-scale mechanisms that give rise to phonon scattering in these interfaces, quantify their thermal boundary resistance and illustrate the failure of common phenomenological models in predicting those features. In particular, we show that twin boundaries have a small but finite interface thermal resistance that can only be understood in terms of a fully atomistic picture.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Ballistic Phonons in Ultrathin Nanowires

  • Vakulov, Daniel
  • Gireesan, Subash
  • Swinkels, Milo Y.
  • Chavez, Ruben
  • Vogelaar, Tom
  • Torres Alvarez, Pol|||0000-0003-2544-5850
  • Campo, Alessio
  • De Luca, Marta|||0000-0001-6061-3261
  • Verheijen, Marcel A.
  • Koelling, Sebastian
  • Gagliano, Luca
  • Haverkort, Jos E. M.
  • Alvarez, F. Xavier|||0000-0001-6746-2144
  • Bobbert, Peter A.
  • Zardo, Ilaria|||0000-0002-8685-2305
  • Bakkers, Erik P. A. M.
According to Fourier's law, a temperature difference across a material results in a linear temperature profile and a thermal conductance that decreases inversely proportional to the system length. These are the hallmarks of diffusive heat flow. Here, we report heat flow in ultrathin (25 nm) GaP nanowires in the absence of a temperature gradient within the wire and find that the heat conductance is independent of wire length. These observations deviate from Fourier's law and are direct proof of ballistic heat flow, persisting for wire lengths up to at least 15 μm at room temperature. When doubling the wire diameter, a remarkably sudden transition to diffusive heat flow is observed. The ballistic heat flow in the ultrathin wires can be modeled within Landauer's formalism by ballistic phonons with an extraordinarily long mean free path.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Improved metal-graphene contacts for low-noise, high-density microtransistor arrays for neural sensing

  • Schaefer, Nathan|||0000-0002-2392-3858
  • Garcia Cortadella, Ramon|||0000-0002-1506-6534
  • Bonaccini Calia, Andrea|||0000-0002-7873-4296
  • Mavredakis, Nikolaos|||0000-0003-3630-9416
  • Illa, Xavi|||0000-0002-3212-1128
  • Masvidal Codina, Eduard|||0000-0002-9579-8603
  • De la Cruz, Jose|||0000-0001-9656-9653
  • Del Corro, Elena|||0000-0001-6452-9139
  • Rodríguez Domínguez, Laura|||0000-0002-6669-1962
  • Prats Alfonso, Elisabet|||0000-0002-7320-1896
  • Bousquet, Jessica|||0000-0001-5721-8092
  • Martínez-Aguilar, Javier
  • Pérez-Marín, Antonio Pablo|||0000-0003-1843-8273
  • Hébert, Clément|||0000-0001-9667-033X
  • Villa, Rosa|||0000-0003-2735-3204
  • Jiménez, David|||0000-0002-8148-198X
  • Guimerà Brunet, Anton|||0000-0003-1768-3293
  • Garrido, Jose|||0000-0001-5621-1067
Poor metal contact interfaces are one of the main limitations preventing unhampered access to the full potential of two-dimensional materials in electronics. Here we present graphene solution-gated field-effect-transistors (gSGFETs) with strongly improved linearity, homogeneity and sensitivity for small sensor sizes, resulting from ultraviolet ozone (UVO) contact treatment. The contribution of channel and contact region to the total device conductivity and flicker noise is explored experimentally and explained with a theoretical model. Finally, in-vitro recordings of flexible microelectrocorticography (μ-ECoG) probes were performed to validate the superior sensitivity of the UVO-treated gSGFET to brain-like activity. These results connote an important step towards the fabrication of high-density gSGFET μ-ECoG arrays with state-of-the-art sensitivity and homogeneity, thus demonstrating the potential of this technology as a versatile platform for the new generation of neural interfaces.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Low-frequency noise parameter extraction method for single-layer graphene FETs

  • Mavredakis, Nikolaos|||0000-0003-3630-9416
  • Wei, Wei
  • Pallecchi, Emiliano|||0000-0002-8682-7935
  • Vignaud, Dominique
  • Happy, Henri|||0000-0003-2065-8080
  • Garcia Cortadella, Ramon|||0000-0002-1506-6534
  • Schaefer, Nathan|||0000-0002-2392-3858
  • Bonaccini Calia, Andrea|||0000-0002-7873-4296
  • Garrido, Jose|||0000-0001-5621-1067
  • Jiménez, David|||0000-0002-8148-198X
In this article, a detailed parameter extraction methodology is proposed for low-frequency noise (LFN) in single-layer (SL) graphene transistors (GFETs) based on a recently established compact LFN model. The drain current and LFN of two short channel back-gated GFETs (L = 300 and 100 nm) were measured at lower and higher drain voltages, for a wide range of gate voltages covering the region away from charge neutrality point (CNP) up to CNP at p-type operation region. Current-voltage (IV) and LFN data were also available from a long-channel SL top solution-gated (SG) GFET (L = 5 μm), for both p- and n-type regions near and away CNP. At each of these regimes, the appropriate IV and LFN parameters can be accurately extracted. Regarding LFN, mobility fluctuation effect is dominant at CNP, and from there, the Hooge parameter α can be extracted, whereas the carrier number fluctuation contribution which is responsible for the well-known M-shape bias dependence of output noise divided by squared drain current, also observed in our data, makes possible the extraction of the N parameter related to the number of traps. In the less possible case of a Λ-shape trend, N and α can be extracted simultaneously from the region near CNP. Away from CNP, contact resistance can have a significant contribution to LFN, and from there, the relevant parameter SΔ R is defined. The LFN parameters described above can be estimated from the low drain voltage region of operation where the effect of velocity saturation (VS) mechanism is negligible. VS effect results in the reduction of LFN at higher drain voltages, and from there, the IV parameter hΩ which represents the phonon energy and is related to VS effect can be derived both from drain current and LFN data.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Bias dependent variability of low-frequency noise in single-layer graphene FETs

  • Mavredakis, Nikolaos|||0000-0003-3630-9416
  • Garcia Cortadella, Ramon|||0000-0002-1506-6534
  • Illa, Xavi|||0000-0002-3212-1128
  • Schaefer, Nathan|||0000-0002-2392-3858
  • Bonaccini Calia, Andrea|||0000-0002-7873-4296
  • Guimerà Brunet, Anton|||0000-0003-1768-3293
  • Garrido, Jose|||0000-0001-5621-1067
  • Jiménez, David|||0000-0002-8148-198X
Low-frequency noise (LFN) variability in graphene transistors (GFETs) is for the first time researched in this work under both experimental and theoretical aspects. LFN from an adequate statistical sample of long-channel solution-gated single-layer GFETs is measured in a wide range of operating conditions while a physics-based analytical model is derived that accounts for the bias dependence of LFN variance with remarkable performance. LFN deviations in GFETs stem from the variations of the parameters of the physical mechanisms that generate LFN, which are the number of traps (Ntr) for the carrier number fluctuation effect (ΔN) due to trapping/detrapping process and the Hooge parameter (αH) for the mobility fluctuations effect (Δμ). ΔN accounts for an M-shape of normalized LFN variance versus gate bias with a minimum at the charge neutrality point (CNP) as it was the case for normalized LFN mean value while Δμ contributes only near the CNP for both variance and mean value. Trap statistical nature of the devices under test is experimentally shown to differ from classical Poisson distribution noticed at silicon-oxide devices, and this might be caused both by the electrolyte interface in GFETs under study and by the premature stage of the GFET technology development which could permit external factors to influence the performance. This not fully advanced GFET process growth might also cause pivotal inconsistencies affecting the scaling laws in GFETs of the same process. This journal is.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Scattering in Terms of Bohmian Conditional Wave Functions for Scenarios with Non-Commuting Energy and Momentum Operators

  • Villani, Matteo|||0000-0003-1315-7851
  • Albareda, Guillermo|||0000-0002-2181-7023
  • Destefani, Carlos Fernando|||0000-0002-3399-4748
  • Cartoixà, Xavier|||0000-0003-1905-5979
  • Oriols, Xavier|||0000-0003-2181-4284
Without access to the full quantum state, modeling quantum transport in mesoscopic systems requires dealing with a limited number of degrees of freedom. In this work, we analyze the possibility of modeling the perturbation induced by non-simulated degrees of freedom on the simulated ones as a transition between single-particle pure states. First, we show that Bohmian conditional wave functions (BCWFs) allow for a rigorous discussion of the dynamics of electrons inside open quantum systems in terms of single-particle time-dependent pure states, either under Markovian or non-Markovian conditions. Second, we discuss the practical application of the method for modeling light-matter interaction phenomena in a resonant tunneling device, where a single photon interacts with a single electron. Third, we emphasize the importance of interpreting such a scattering mechanism as a transition between initial and final single-particle BCWF with well-defined central energies (rather than with well-defined central momenta).
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Can Wigner distribution functions with collisions satisfy complete positivity and energy conservation?

  • Villani, Matteo|||0000-0003-1315-7851
  • Oriols, Xavier|||0000-0003-2181-4284
To avoid the computational burden of many-body quantum simulation, the interaction of an electron with a photon (phonon) is typically accounted for by disregarding the explicit simulation of the photon (phonon) degree of freedom and just modeling its effect on the electron dynamics. For quantum models developed from the (reduced) density matrix or its Wigner-Weyl transformation, the modeling of collisions may violate complete positivity (precluding the typical probabilistic interpretation). In this paper, we show that such quantum transport models can also strongly violate the energy conservation in the electron-photon (electron-phonon) interactions. After comparing collisions models to exact results for an electron interacting with a photon, we conclude that there is no fundamental restriction that prevents a collision model developed within the (reduced) density matrix or Wigner formalisms to satisfy simultaneously complete positivity and energy conservation. However, at the practical level, the development of such satisfactory collision model seems very complicated. Collision models with an explicit knowledge of the microscopic state ascribed to each electron seems recommendable (Bohmian conditional wavefunction), since they allow to model collisions of each electron individually in a controlled way satisfying both complete positivity and energy conservation.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Effective 1D Time-Dependent Schrödinger Equations for 3D Geometrically Correlated Systems

  • Pandey, Devashish|||0000-0003-0349-6913
  • Oriols, Xavier|||0000-0003-2181-4284
  • Albareda, Guillermo|||0000-0002-2181-7023
The so-called Born-Huang ansatz is a fundamental tool in the context of ab-initio molecular dynamics, viz., it allows effectively separating fast and slow degrees of freedom and thus treating electrons and nuclei with different mathematical footings. Here, we consider the use of a Born-Huang-like expansion of the three-dimensional time-dependent Schrödinger equation to separate transport and confinement degrees of freedom in electron transport problems that involve geometrical constrictions. The resulting scheme consists of an eigenstate problem for the confinement degrees of freedom (in the transverse direction) whose solution constitutes the input for the propagation of a set of coupled one-dimensional equations of motion for the transport degree of freedom (in the longitudinal direction). This technique achieves quantitative accuracy using an order less computational resources than the full dimensional simulation for a typical two-dimensional geometrical constriction and upto three orders for three-dimensional constriction.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Noise and charge discreteness as ultimate limit for the THz operation of ultra-small electronic devices

  • Colomés Capón, Enrique|||0000-0003-3030-4526
  • Mateos, Javier
  • González, Tomás
  • Oriols, Xavier|||0000-0003-2181-4284
To manufacture faster electron devices, the industry has entered into the nanoscale dimensions and Terahertz (THz) working frequencies. The discrete nature of the few electrons present simultaneously in the active region of ultra-small devices generate unavoidable fluctuations of the current at THz frequencies. The consequences of this noise remain unnoticed in the scientific community because its accurate understanding requires dealing with consecutive multi-time quantum measurements. Here, a modeling of the quantum measurement of the current at THz frequencies is introduced in terms of quantum (Bohmian) trajectories. With this new understanding, we develop an analytic model for THz noise as a function of the electron transit time and the sampling integration time, which finally determine the maximum device working frequency for digital applications. The model is confirmed by either semi-classical or full- quantum time-dependent Monte Carlo simulations. All these results show that intrinsic THz noise increases unlimitedly when the volume of the active region decreases. All attempts to minimize the low signal-to-noise ratio of these ultra-small devices to get effective THz working frequencies are incompatible with the basic elements of the scaling strategy. One can develop THz electron devices, but they cannot have ultra-small dimensions. Or, one can fabricate ultra-small electron devices, but they cannot be used for THz working frequencies.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A flexible dipole antenna for direct transduction of microwave radiated power into DC mechanical deflection

  • Ruiz, Raul
  • Bonache, Jordi|||0000-0002-7225-5737
  • Abadal, Gabriel|||0000-0002-6380-4298
A new device resulting from the merging of mechanical and electromagnetic properties of a couple of conductive cantilevered beams is described in this paper. The device, which is based on two metallic clamped-free beams which, at the same time, are the arms of a radio frequency dipole antenna is capable to receive the electromagnetic power radiated from an emitting antenna and transduce it directly in a dc mechanical actuation. A numerical model developed to describe the behavior of the device has been validated through the test of a millimeter scale demonstrator working in the microwave frequency band.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

3D BiTe Interconnected Nanowire Networks to Increase Thermoelectric Efficiency

  • Ruiz-Clavijo, Alejandra
  • Caballero-Calero, Olga
  • Manzano, Cristina V.|||0000-0001-5708-6544
  • Maeder, Xavier
  • Beardo, Albert|||0000-0003-1889-1588
  • Cartoixà, Xavier|||0000-0003-1905-5979
  • Alvarez, F. Xavier|||0000-0001-6746-2144
  • Martín-González, Marisol|||0000-0002-5687-3674
3D interconnected nanowire scaffoldings are shown to increase the thermoelectric efficiency in comparison to similar diameter 1D nanowires and films grown under similar electrodeposition conditions. BiTe 3D nanonetworks offer a reduction in thermal conductivity (κ) while preserving the high electrical conductivity of the films. The reduction in κ is modeled using the hydrodynamic heat transport equation, and it can be understood as a heat viscosity effect due to the 3D nanostructuration. In addition, the Seebeck coefficient is twice that of nanowires and films, and up to 50% higher than in a single crystal. This increase is interpreted as a nonequilibrium effect that the geometry of the structure induces on the distribution function of the phonons, producing an enhanced phonon drag. These thermoelectric metamaterials have higher performance and are fabricated with large areas by a cost-effective method, which makes them suitable for up-scale production.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Remote dynamic actuation of an electrostatically driven microcantilever by a wireless power transfer system

  • Ruiz, Raul
  • Abadal, Gabriel|||0000-0002-6380-4298
The design, modelling, fabrication and test of a device prototype, based on a microcantilever capacitively connected to a folded-end half-wave dipole antenna, which is remotely actuated by a wireless power transfer (WPT) system are presented here. The microcantilever and the antenna, which are coupled at the antenna feeding point, work as a new device, is able to harness the radiated energy wirelessly transferred from an emitter antenna to directly excite the mechanical vibration modes of the microcantilever. The response to an amplitude-modulated (AM) RF radiated signal excitation produced by a transmitting antenna is experimentally analysed and fit to a simple model when the distance between both antennas varies from the near field to the radiated far field regime.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

2D pn junctions driven out-of-equilibrium

  • Chaves Romero, Ferney Alveiro|||0000-0001-9506-4485
  • Feijoo, Pedro Carlos|||0000-0002-7653-4573
  • Jiménez, David|||0000-0002-8148-198X
The pn junction is a fundamental electrical component in modern electronics and optoelectronics. Currently, there is a great deal of interest in the two-dimensional (2D) pn junction. Although many experiments have demonstrated the working principle, there is a lack of fundamental understanding of its basic properties and expected performances, in particular when the device is driven out-of-equilibrium. To fill the current gap in understanding, we investigate the electrostatics and electronic transport of 2D lateral pn junctions. To do so we implement a physics-based simulator that self-consistently solves the 2D Poisson's equation coupled to the drift-diffusion and continuity equations. Notably, the simulator takes into account the strong influence of the out-of-plane electric field through the surrounding dielectric, capturing the weak screening of charge carriers. Supported by simulations, we propose a Shockley-like equation for the ideal current-voltage (J-V) characteristics, in full analogy to the bulk junction after defining an effective depletion layer (EDL). We also discuss the impact of recombination-generation processes inside the EDL, which actually produce a significant deviation with respect to the ideal behavior, consistently with experimental data. Moreover, we analyze the capacitances and conductance of the 2D lateral pn junction. Based on its equivalent circuit we investigate its cut-off frequency targeting RF applications. To gain deeper insight into the role played by material dimensionality, we benchmark the performances of single-layer MoS2 (2D) lateral pn junctions against those of the Si (3D) junction. Finally, a practical discussion on the short length 2D junction case together with the expected impact of interface states has been provided. Given the available list of 2D materials, this work opens the door to a wider exploration of material-dependent performances.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Does carrier velocity saturation help to enhance f in graphene field-effect transistors?

  • Feijoo, Pedro Carlos|||0000-0002-7653-4573
  • Pasadas, Francisco|||0000-0003-3992-9864
  • Bonmann, Marlene|||0000-0001-5192-0606
  • Asad, Muhammad|||0000-0002-5204-932X
  • Yang, Xinxin|||0000-0003-4464-6922
  • Generalov, Andrey|||0000-0002-9546-9391
  • Vorobiev, Andrei|||0000-0003-2882-3191
  • Banszerus, Luca|||0000-0002-1855-1287
  • Stampfer, Christoph|||0000-0002-4958-7362
  • Otto, Martin|||0000-0001-6704-3468
  • Neumaier, Daniel|||0000-0002-7394-9159
  • Stake, Jan|||0000-0002-8204-7894
  • Jiménez, David|||0000-0002-8148-198X
It has been argued that current saturation in graphene field-effect transistors (GFETs) is needed to get optimal maximum oscillation frequency (f ). This paper investigates whether velocity saturation can help to get better current saturation and if that correlates with enhanced f . We have fabricated 500 nm GFETs with high extrinsic f (37 GHz), and later simulated with a drift-diffusion model augmented with the relevant factors that influence carrier velocity, namely: short-channel electrostatics, saturation velocity effect, graphene/dielectric interface traps, and self-heating effects. Crucially, the model provides microscopic details of channel parameters such as carrier concentration, drift and saturation velocities, allowing us to correlate the observed macroscopic behavior with the local magnitudes. When biasing the GFET so all carriers in the channel are of the same sign resulting in highly concentrated unipolar channel, we find that the larger the drain bias is, both closer the carrier velocity to its saturation value and the higher the f are. However, the highest f can be achieved at biases where there exists a depletion of carriers near source or drain. In such a situation, the highest f is not found in the velocity saturation regime, but where carrier velocity is far below its saturated value and the contribution of the diffusion mechanism to the current is comparable to the drift mechanism. The position and magnitude of the highest f depend on the carrier concentration and total velocity, which are interdependent and are also affected by the self-heating. Importantly, this effect was found to severely limit radio-frequency performance, reducing the highest f from ∼60 to ∼40 GHz.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Multi-scale analysis of radio-frequency performance of 2D-material based field-effect transistors

  • Toral-Lopez, Alejandro|||0000-0001-5612-0536
  • Pasadas, Francisco|||0000-0003-3992-9864
  • Marin, Enrique G.|||0000-0002-0302-3764
  • Medina-Rull, Alberto|||0000-0003-4691-0328
  • Gonzalez-Medina, J. M.
  • Ruiz, F. G.
  • Jiménez, David|||0000-0002-8148-198X
  • Godoy Medina, Andres|||0000-0002-3014-8765
Two-dimensional materials (2DMs) are a promising alternative to complement and upgrade high-frequency electronics. However, in order to boost their adoption, the availability of numerical tools and physically-based models able to support the experimental activities and to provide them with useful guidelines becomes essential. In this context, we propose a theoretical approach that combines numerical simulations and small-signal modeling to analyze 2DM-based FETs for radio-frequency applications. This multi-scale scheme takes into account non-idealities, such as interface traps, carrier velocity saturation, or short channel effects, by means of self-consistent physics-based numerical calculations that later feed the circuit level via a small-signal model based on the dynamic intrinsic capacitances of the device. At the circuit stage, the possibilities range from the evaluation of the performance of a single device to the design of complex circuits combining multiple transistors. In this work, we validate our scheme against experimental results and exemplify its use and capability assessing the impact of the channel scaling on the performance of MoS2-based FETs targeting RF applications.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Compact modeling technology for the simulation of integrated circuits based on graphene field-effect transistors

  • Pasadas, Francisco|||0000-0003-3992-9864
  • Feijoo, Pedro Carlos|||0000-0002-7653-4573
  • Mavredakis, Nikolaos|||0000-0003-3630-9416
  • Pacheco-Sanchez, Anibal|||0000-0002-0897-0605
  • Chaves Romero, Ferney Alveiro|||0000-0001-9506-4485
  • Jiménez, David|||0000-0002-8148-198X
The progress made toward the definition of a modular compact modeling technology for graphene field-effect transistors (GFETs) that enables the electrical analysis of arbitrary GFET-based integrated circuits is reported. A set of primary models embracing the main physical principles defines the ideal GFET response under DC, transient (time domain), AC (frequency domain), and noise (frequency domain) analysis. Another set of secondary models accounts for the GFET non-idealities, such as extrinsic-, short-channel-, trapping/detrapping-, self-heating-, and non-quasi static-effects, which can have a significant impact under static and/or dynamic operation. At both device and circuit levels, significant consistency is demonstrated between the simulation output and experimental data for relevant operating conditions. Additionally, a perspective of the challenges during the scale up of the GFET modeling technology toward higher technology readiness levels while drawing a collaborative scenario among fabrication technology groups, modeling groups, and circuit designers, is provided.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Three types of Landauer's erasure principle, a microscopic view

  • Oriols, Xavier|||0000-0003-2181-4284
  • Nikolić, Hrvoje
An important step to incorporate information in the second law of thermodynamics was done by Landauer, showing that the erasure of information implies an increase in heat. Most attempts to justify Landauer's erasure principle are based on thermodynamic argumentations. Here, using just the time-reversibility of classical microscopic laws, we identify three types of the Landauer's erasure principle depending on the relation between the two final environments: the one linked to a logical input 1 and the other to logical input 0. The strong type (which is the original Landauer's formulation) requires the final environments to be in thermal equilibrium. The intermediate type giving the entropy change of kln 2 occurs when the two final environments are identical macroscopic states. Finally, the weak Landauer's principle, providing information erasure with no entropy change, when the two final environments are macroscopically different. Even though the above results are formally valid for classical erasure gates, a discussion on their natural extension to quantum scenarios is presented. This paper strongly suggests that the original Landauer's principle (based on the assumption of thermalized environments) is fully reasonable for microelectronics, but it becomes less reasonable for future few-atoms devices working at THz frequencies. Thus, the weak and intermediate Landauer's principles, where the erasure of information is not necessarily linked to heat dissipation, are worth investigating.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Straightforward bias- and frequency-dependent small-signal model extraction for single-layer graphene FETs

  • Mavredakis, Nikolaos|||0000-0003-3630-9416
  • Pacheco-Sanchez, Anibal|||0000-0002-0897-0605
  • Wei, Wei
  • Pallecchi, Emiliano|||0000-0002-8682-7935
  • Happy, Henri|||0000-0003-2065-8080
  • Jiménez, David|||0000-0002-8148-198X
We propose an explicit small-signal graphene field-effect transistor (GFET) parameter extraction procedure based on a charge-based quasi-static model. The dependence of the small-signal parameters on both gate voltage and frequency is precisely validated by high-frequency (up to 18 GHz) on-wafer measurements from a 300 nm device. These parameters are studied simultaneously, in contrast to other works which focus exclusively on few. Efficient procedures have been applied to GFETs for the first time to remove contact and gate resistances from the Y-parameters. The use of these methods yields straightforward equations for extracting the small-signal model parameters, which is extremely useful for radio-frequency circuit design. Furthermore, we show for the first time experimental validation vs. both gate voltage and frequency of the intrinsic GFET non-reciprocal capacitance model. Accurate models are also presented for the gate voltage-dependence of the measured unity-gain and maximum oscillation frequencies as well as of the current and power gains.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Degradation of the ZT thermoelectric figure of merit in silicon when nanostructuring, From bulk to nanowires

  • Raya Moreno, Martí|||0000-0001-6190-9769
  • Rurali, Riccardo|||0000-0002-4086-4191
  • Cartoixà, Xavier|||0000-0003-1905-5979
Since the landmark paper by Hicks and Dresselhaus [Phys. Rev. B 47, 16631(R) (1993)], there has been a general consensus that one-dimensional nanoscale conductors, i.e. nanowires, provide the long sought paradigm to implement the so-called phonon-glass electron-crystal material, which results in large improvements in the thermoelectric figure of merit ZT. Despite some encouraging-though isolated-experimental results, this idea has never been subjected to a rigorous scrutiny and the effect of the coupled dynamics of electrons and phonons has usually been oversimplified. To bypass these limitations, we have calculated the effective thermoelectric parameters for silicon nanowires (SiNWs) by iteratively solving the coupled electron-phonon Boltzmann transport equation (EPBTE) supplied with first-principles data. This allows for an unprecedented precision in determining the correct dependence of the thermoelectric parameters with system size; including, but not limited to, the figure of merit and its enhancement or degradation due to nanostructuring. Indeed, we demonstrate that the commonly used relaxation time approximation (RTA), or the uncoupled beyond the RTA (iterative) solution fail to describe the correct effect of nanostructuring on the thermoelectric properties and efficiency in SiNWs due to the strong contribution of phonon drag to the Seebeck coefficient, so that the use of fully coupled solution of the EPBTE is essential to obtain the correct effect of nanostructuring. Most importantly, we show that, contrarily to what commonly argued, resorting to NWs is not necessarily beneficial for ZT. Indeed, in a wide range of diameters nanostructuring diminishes the Seebeck coefficient faster than the decrease in thermal conductivity, due to the suppression of very long wavelength phonons responsible for the largest contribution to the phonon drag component of the Seebeck coefficient. This penalty to ZT can be mitigated if the NWs have a very rough surface, providing additional reduction to the thermal conductivity. Additionally, we demonstrate that our methodology provides improved data sets for an accurate determination of doping concentration in NWs through electrical-based inference and excellent agreement with the available experimental data.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Phonon Transport in GaAs and InAs Twinning Superlattices

  • López-Güell, Kim|||0000-0002-8462-8668
  • Forrer, Nicolas
  • Cartoixà, Xavier|||0000-0003-1905-5979
  • Zardo, Ilaria|||0000-0002-8685-2305
  • Rurali, Riccardo|||0000-0002-4086-4191
Crystal phase engineering gives access to new types of periodic nanostructures, such as the so-called twinning superlattices, where the motif of the superlattice is determined by a periodic rotation of the crystal. Here, by means of atomistic nonequilibrium molecular dynamics calculations, we study to what extent these periodic systems can be used to alter phonon transport in a controlled way, similar to what has been predicted and observed in conventional superlattices based on heterointerfaces. We focus on twinning superlattices in GaAs and InAs and highlight the existence of two different transport regimes: in one, each interface behaves like an independent scatterer; in the other, a segment with a sufficiently large number of closely spaced interfaces is seen by propagating phonons as a metamaterial with its own thermal properties. In this second scenario, we distinguish the case where the phonon mean free path is smaller or larger than the superlattice segment, pointing out a different dependence of the thermal resistance with the number of interfaces.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Resonant tunneling diodes in semiconductor microcavities, Modeling polaritonic features in the terahertz displacement current

  • Destefani, Carlos Fernando|||0000-0002-3399-4748
  • Villani, Matteo|||0000-0003-1315-7851
  • Cartoixà, Xavier|||0000-0003-1905-5979
  • Feiginov, Michael|||0000-0002-9589-6721
  • Oriols, Xavier|||0000-0003-2181-4284
We develop in this work a qualitative quantum electron transport model, in the strong light-matter coupling regime under dipole approximation, able to capture polaritonic signatures in the time-dependent electrical current. The effect of the quantized electromagnetic field in the displacement current of a resonant tunneling diode inside an optical cavity is analyzed. The original peaks of the bare electron transmission coefficient split into two new peaks due to the resonant electron-photon interaction, leading to coherent Rabi oscillations among the polaritonic states that are developed in the system in the strong coupling regime. This mimics known effects predicted by a Jaynes-Cummings model in closed systems and shows how a full quantum treatment of electrons and electromagnetic fields may open interesting paths for engineering new THz electron devices. The computational burden involved in the multi-time measurements of THz currents is tackled by invoking a Bohmian description of the light-matter interaction. We also show that the traditional static transmission coefficient used to characterize DC quantum electron devices has to be substituted by a new displacement current coefficient in high-frequency AC scenarios.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Multilevel 3-D Device Simulation Approach Applied to Deeply Scaled Nanowire Field Effect Transistors

  • Seoane, Natalia|||0000-0003-0973-461X
  • Kalna, Karol|||0000-0002-6333-9189
  • Cartoixà, Xavier|||0000-0003-1905-5979
  • Garcia-Loureiro, Antonio|||0000-0003-0574-1513
Three silicon nanowire (SiNW) field effect transistors (FETs) with 15-, 12.5- and 10.6-nm gate lengths are simulated using hierarchical multilevel quantum and semiclassical models verified against experimental ID - VG characteristics. The tight-binding (TB) formalism is employed to obtain the band structure in k-space of ellipsoidal NWs to extract electron effective masses. The masses are transferred into quantum-corrected 3-D finite element (FE) drift-diffusion (DD) and ensemble Monte Carlo (MC) simulations, which accurately capture the quantum-mechanical confinement of the ellipsoidal NW cross sections. We demonstrate that the accurate parameterization of the bandstructure and the quantum-mechanical confinement has a profound impact on the computed ID - VG characteristics of nanoscaled devices. Finally, we devise a step-by-step technology computer-aided design (TCAD) methodology of simple parameterization for efficient DD device simulations.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

New insights in the lattice dynamics of monolayers, bilayers, and trilayers of WSe2 and unambiguous determination of few-layer-flakes' thickness

  • De Luca, Marta|||0000-0001-6061-3261
  • Cartoixà, Xavier|||0000-0003-1905-5979
  • Martín Sánchez, Javier|||0000-0002-6601-9447
  • López-Suárez, Miquel|||0000-0003-2338-277X
  • Trotta, Rinaldo|||0000-0002-9515-6790
  • Rurali, Riccardo|||0000-0002-4086-4191
  • Zardo, Ilaria|||0000-0002-8685-2305
Among the most common few-layers transition metal dichalcogenides (TMDs), WSe2 is the most challenging material from the lattice dynamics point of view. Indeed, for a long time the main two phonon modes (A 1g and) have been wrongly assigned. In the last few years, these two modes have been properly interpreted, and their quasi-degeneracy in the monolayer has been used for its identification. In this work, we show that this approach has a limited validity and we propose an alternative, more general approach, based on multi-phonon bands. Moreover, we show and interpret all the peaks (about 40) appearing in the Raman spectra of monolayers, bilayers, and trilayers of WSe2 by combining experimental wavelength- and polarization-dependent Raman studies with density-functional theory calculations providing the phonon dispersions, the polarization-resolved first-order Raman spectra, and the two-phonon density of states. This complete study not only offers a method to distinguish between monolayers, bilayers, and trilayers with no need of optical images and atomic force microscopy, but it also sheds light on the interpretation of single and multi-phonon bands appearing in the inelastic light scattering experiments of layered WSe2; some of these bands were never observed before, and some were observed and uncertainly assigned. We promote the full understanding of the lattice dynamics of this material that is crucial for the realization of optoelectronics devices and of novel phononic metamaterials, such as TMDs superlattices.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Hydrodynamic signatures in thermal transport in devices based on two-dimensional materials, an ab initio study

  • Raya Moreno, Martí|||0000-0001-6190-9769
  • Carrete, Jesús|||0000-0003-0971-1098
  • Cartoixà, Xavier|||0000-0003-1905-5979
We investigate the features arising from hydrodynamic effects in graphene and phosphorene devices with finite heat sources, using ab initio calculations to go beyond Callaway's model and inform a full linearized scattering operator, and solving the phonon Boltzmann transport equation through energy-based deviational Monte Carlo methods. We explain the mechanisms that create those hydrodynamic features, showing that boundary scattering and the relation of sample dimensions to the nonlocal length ℓ are the determinant factors, regardless of the relative importance of normal versus resistive scattering. From this point of view, the nonlocal length ℓ reflects the ability of scattering to randomize the heat flux, and we show that approximations made on the scattering operator may have, through the value of ℓ, qualitative consequences on the signatures of hydrodynamic behavior.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Experimental demonstration of the suppression of optical phonon splitting in 2D materials by Raman spectroscopy

  • De Luca, Marta|||0000-0001-6061-3261
  • Cartoixà, Xavier|||0000-0003-1905-5979
  • Indolese, David I.|||0000-0002-9436-8994
  • Martín Sánchez, Javier|||0000-0002-6601-9447
  • Watanabe, Kenji|||0000-0003-3701-8119
  • Taniguchi, Takashi|||0000-0002-1467-3105
  • Schönenberger, Christian
  • Trotta, Rinaldo|||0000-0002-9515-6790
  • Rurali, Riccardo|||0000-0002-4086-4191
  • Zardo, Ilaria|||0000-0002-8685-2305
Raman spectroscopy is one of the most extended experimental techniques to investigate thin-layered 2D materials. For a complete understanding and modeling of the Raman spectrum of a novel 2D material, it is often necessary to combine the experimental investigation to density functional theory calculations. We provide the experimental proof of the fundamentally different behavior of polar 2D vs 3D systems regarding the effect of the dipole - dipole interactions, which in 2D systems ultimately lead to the absence of optical phonons splitting, otherwise present in 3D materials. We demonstrate that non-analytical corrections (NACs) should not be applied to properly model the Raman spectra of few-layered 2D materials, such as WSe2 and h-BN, corroborating recent theoretical predictions (Sohier et al 2017 Nano Lett. 17 3758-63). Our findings are supported by measurements performed on tilted samples that allow increasing the component of photon momenta in the plane of the flake, thus unambiguously setting the direction of an eventual NAC. We also investigate the influence of the parity of the number of layers and of the type of layer-by-layer stacking on the effect of NACs on the Raman spectra.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Atomistic Insights on the Full Operation Cycle of a HfO2-Based Resistive Random Access Memory Cell from Molecular Dynamics

  • Urquiza, M. Laura
  • Islam, Md Mahbubul|||0000-0003-4584-2204
  • Van Duin, Adri|||0000-0002-3478-4945
  • Cartoixà, Xavier|||0000-0003-1905-5979
  • Strachan, Alejandro
We characterize the atomic processes that underlie forming, reset, and set in HfO2-based resistive random access memory (RRAM) cells through molecular dynamics (MD) simulations, using an extended charge equilibration method to describe external electric fields. By tracking the migration of oxygen ions and the change in coordination of Hf atoms in the dielectric, we characterize the formation and dissolution of conductive filaments (CFs) during the operation of the device with atomic detail. Simulations of the forming process show that the CFs form through an oxygen exchange mechanism, induced by a cascade of oxygen displacements from the oxide to the active electrode, as opposed to aggregation of pre-existing oxygen vacancies. However, the filament breakup is dominated by lateral, rather than vertical (along the filament), motion of vacancies. In addition, depending on the temperature of the system, the reset can be achieved through a redox effect (bipolar switch), where oxygen diffusion is governed by the applied bias, or by a thermochemical process (unipolar switch), where the diffusion is driven by temperature. Unlike forming and similar to reset, the set process involves lateral oxygen atoms as well. This is driven by field localization associated with conductive paths.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Reliably straining suspended van der Waals heterostructures

  • Nazzari, Daniele|||0000-0003-4267-3142
  • Genser, Jakob
  • Sistani, Masiar|||0000-0001-5730-234X
  • Bartmann, Maximilian G.|||0000-0002-9556-1550
  • Cartoixà, Xavier|||0000-0003-1905-5979
  • Rurali, Riccardo|||0000-0002-4086-4191
  • Weber, Walter M.|||0000-0001-9504-5671
  • Lugstein, Alois|||0000-0001-5693-4775
2D materials provide a rapidly expanding platform for the observation of novel physical phenomena and for the realization of cuttingedge optoelectronic devices. In addition to their peculiar individual characteristics, 2D materials can be stacked into complex van der Waals heterostructures, greatly expanding their potential. Moreover, thanks to their excellent stretchability, strain can be used as a powerful control knob to tune or boost many of their properties. Here, we present a novel method to reliably and repeatedly apply a high uniaxial tensile strain to suspended van der Waals heterostructures. The reported device is engineered starting from a silicon-on-insulator substrate, allowing for the realization of suspended silicon beams that can amplify the applied strain. The strain module functionality is demonstrated using singleand double-layer graphene layers stacked with a multilayered hexagonal boron nitride flake. The heterostructures can be uniaxially strained, respectively, up to ∼1.2% and ∼1.8%.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Schottky barriers, emission regimes and contact resistances in 2H-1T' MoS2 lateral metal-semiconductor junctions from first-principles

  • Urquiza, Laura
  • Cartoixà, Xavier|||0000-0003-1905-5979
We have studied the finite bias transport properties of a 2H-1T' MoS2 lateral metal-semiconductor (M-S) junction by non-equilibrium Green's functions calculations, aimed at contacting the 2D channel in a field effect transistor. Our results indicate that (a) despite the fundamentally different electrostatics of line and planar dipoles, the Schottky barrier heights respond similarly to changes in doping and applied bias in 2D and 3D M-S junctions, (b) 2H-1T' MoS2 lateral junctions are free from Fermi level pinning, (c) armchair interfaces have superior contacting properties vs. zigzag interfaces, (d) 1T' contacts to p channels will present a reduced contact resistance by a factor of 4-10 with respect to n channels and (e) contacts to intermediately doped n (p) channels operate in the field (thermionic) emission regime. We also provide an improved procedure to experimentally determine the emission regime in 2D material junctions.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Tunable thermal conductivity of ternary alloy semiconductors from first-principles

  • De Santiago, Francisco
  • Raya Moreno, Martí|||0000-0001-6190-9769
  • Miranda Durán, Álvaro|||0000-0002-5374-448X
  • Cruz-Irisson, Miguel|||0000-0002-5446-8640
  • Cartoixà, Xavier|||0000-0003-1905-5979
  • Rurali, Riccardo|||0000-0002-4086-4191
We compute the thermal conductivity, κ, of five representative III-V ternary alloys - namely In x Ga1 - x As, GaAs1 - x P x , InAs1 - x Sb x , GaAs1 - x N x , and GaP1 - x N x - in the whole range of compositions, and in zincblende and wurtzite crystal phases, using a first-principles approach and solving the phonon Boltzmann transport equation beyond the relaxation time approximation. We discuss the tunability of the thermal conductivity with the composition of the alloy, reporting a steep decrease in the thermal conductivity, followed by a wide plateau and a steep increase common in systems with lattice disorder. We also test the approximation consisting in considering impurities at small values of x as bare mass defects, neglecting their chemical identity, and discuss its validity.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Thermal conductivity for III-V and II-VI semiconductor wurtzite and zinc-blende polytypes, the role of anharmonicity and phase space

  • Raya Moreno, Martí|||0000-0001-6190-9769
  • Rurali, Riccardo|||0000-0002-4086-4191
  • Cartoixà, Xavier|||0000-0003-1905-5979
We calculate the lattice thermal conductivity (κ) for cubic (zinc-blende) and hexagonal (wurtzite) phases for eight semiconductors using ab initio calculations and solving the phonon Boltzmann transport equation, explaining the different behavior of the ratio κhex/κcub between the two phases. We show that this behavior depends on the relative importance of two antagonistic factors: anharmonicity, which we find to be always higher in the cubic phase, and the accessible phase space, which is higher for the less symmetric hexagonal phase. Based on that, we develop a method that predicts the most conducting phase - cubic or hexagonal - where other more heuristic approaches fail. We also present results for nanowires made of the same materials, showing the possibility to tune κhex/κcub over a wide range by modifying their diameter, thus making them attractive materials for complex phononic and thermoelectric applications and systems.