Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

The impact of graphene oxide nanosheet lateral dimensions on the electrochemical performance of nanoporous graphene-based electrodes

  • Bernicola, María del Pilar|||0000-0002-8124-2567
  • Madrid-Gimeno, Miquel
  • Murillo Cremaes, Nerea
  • Battisti, Tommaso
  • Lozano, Neus|||0000-0002-9026-1743
  • Kostarelos, Kostas|||0000-0002-2224-6672
  • Garrido, Jose|||0000-0001-5621-1067
  • Del Corro, Elena|||0000-0001-6452-9139
Electrodes based on nanoporous reduced graphene oxide (rGO) have been developed as the interfacing component in different designs of neural implants in a variety of therapeutic and monitoring applications. The starting graphene oxide (GO) nanosheets lateral dimensions influenced the staking order, roughness and thickness of the derived rGO films, including the formation of nanochannels. Apart from the morphological differences observed, the GO lateral dimension also impacted on the film conductivity, and on the overall electrochemical performance of the rGO electrodes. While electrodes fabricated from nano-scale GO sheets (us-GO) only showed diffusion-limited impedance in the high frequency regime, the electrical response of electrodes from micron-scale GO sheets (L-GO) was limited by diffusion in the whole frequency range due to a less disordered nanoporous film. At 1 kHz, us-GO electrodes, due to their larger capacitance, presented a higher charge injection limit (Qinj.l.) than L-GO electrodes. Due to the higher conductivity of L-GO, electrodes exhibited half the ohmic drop (IR) of electrodes made of us-GO,. This work highlights the importance of GO nanosheet engineering to optimize the performance of rGO electrodes in terms of Qinj.l. and IR, two key figures of merit in neuroelectronic applications.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A Graphene Field-Effect Transistor Based Analogue Phase Shifter for High-Frequency Applications

  • Medina-Rull, Alberto|||0000-0003-4691-0328
  • Pasadas, Francisco|||0000-0003-3992-9864
  • Marin, Enrique G.|||0000-0002-0302-3764
  • Toral-Lopez, Alejandro|||0000-0001-5612-0536
  • Cuesta-López, Juan|||0000-0001-7905-9969
  • Godoy Medina, Andres|||0000-0002-3014-8765
  • Jiménez, David|||0000-0002-8148-198X
  • Garcia Ruiz, Francisco J.|||0000-0003-4659-2454
We present a graphene-based phase shifter for radio-frequency (RF) phase-array applications. The core of the designed phase-shifting system consists of a graphene field-effect transistor (GFET) used in a common source amplifier configuration. The phase of the RF signal is controlled by exploiting the quantum capacitance of graphene and its dependence on the terminal transistor biases. In particular, by independently tuning the applied gate-to-source and drain-to-source biases, we observe that the phase of the signal, in the super-high frequency band, can be varied nearly 200° with a constant gain of 2.5 dB. Additionally, if only the gate bias is used as control signal, and the drain is biased linearly dependent on the former (i.e., in a completely analogue operation), a phase shift of 85° can be achieved making use of just one transistor and keeping a gain of 0 dB with a maximum variation of 1.3 dB. The latter design can be improved by applying a balanced branch-line configuration showing to be competitive against other state-of-the-art phase shifters. This work paves the way towards the exploitation of graphene technology to become the core of active analogue phase shifters for high-frequency operation.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Compact Modeling of pH-Sensitive FETs Based on 2-D Semiconductors

  • Grour, Tarek El|||0000-0003-2963-7104
  • Pasadas, Francisco|||0000-0003-3992-9864
  • Medina-Rull, Alberto|||0000-0003-4691-0328
  • Najari, Montassar|||0000-0002-5382-8528
  • Marin, Enrique G.|||0000-0002-0302-3764
  • Toral-Lopez, Alejandro|||0000-0001-5612-0536
  • Garcia Ruiz, Francisco J.|||0000-0003-4659-2454
  • Godoy Medina, Andres|||0000-0002-3014-8765
  • Jiménez, David|||0000-0002-8148-198X
  • Mir, Lassaad El
We present a physics-based circuit-compatible model for pH-sensitive field-effect transistors based on 2-D materials. The electrostatics along the electrolyte-gated 2-D-semiconductor stack is treated by solving the Poisson equation, including the site-binding model and the Gouy-Chapman-Stern approach, while the carrier transport is described by the drift-diffusion theory. The proposed model is provided in an analytical form and then implemented in Verilog-A, making it compatible with standard technology computer-aided design tools employed for circuit simulation. The model is benchmarked against two experimental transition-metal-dichalcogenide (MoS2 and ReS2)-based ion sensors, showing excellent agreement when predicting the drain current, threshold voltage shift, and current/voltage sensitivity measurements for different pH concentrations.
Digibug. Repositorio Institucional de la Universidad de Granada
Publicación Artículo científico (JournalArticle)

Electronic Transport in 2D-Based Printed FETs from a Multiscale Perspective

  • Perucchini, Marta
  • González Marín, Enrique
The authors gratefully acknowledge the ERC PEP2D (contract no. 770047) and H2020 WASP (contract no. 825213) and the Crosslab Department of Excellence project for financial support. E.G.M. also acknowledges the support by the Spanish MCI through the project PID2020-116518GB-I00 and by the Junta de Andalucia-Consejeria de Economia y Conocimiento/FEDER-EU through the Project A-TIC-646-UGR20. Open access funding provided by Universita degli Studi di Pisa within the CRUI-CARE Agreement., As 2D materials (2DMs) gain the research limelight as a technological option for obtaining on-demand printed low-cost integrated circuits with reduced environmental impact, theoretical methods able to provide the necessary fabrication guidelines acquire fundamental importance. Here, a multiscale modeling technique is exploited to study electronic transport in devices consisting of a printed 2DM network of flakes. The approach implements a Monte Carlo scheme to generate the flake distribution. By means of ab initio density functional theory calculations together with non equilibrium Green’s functions formalism, detailed physical insights on flake-to-flake transport mechanisms are provided. This later feeds a 3D drift-diffusion and Poisson solution to compute self-consistently transport and electrostatics in the device. The method is applied to MoS2 and graphene-based dielectrically gated FETs, highlighting the impact of the structure density and variability on the mobility and sheet resistance. The prediction capability of the proposed approach is validated against electrical measurements of in-house printed graphene conductive lines as a function of film thickness, demonstrating its strong potential as a guide for future experimental activity in the field., ERC PEP2D 770047, H2020 WASP 825213, Crosslab Department of Excellence project, Spanish Government PID2020-116518GB-I00, Junta de Andalucia-Consejeria de Economia y Conocimiento/FEDER-EU A-TIC-646-UGR20, Universita degli Studi di Pisa within the CRUI-CARE Agreement
Digibug. Repositorio Institucional de la Universidad de Granada
Publicación Artículo científico (JournalArticle)

A Graphene Field-Effect Transistor Based Analogue Phase Shifter for High-Frequency Applications

  • Medina Rull, Alberto
  • Pasadas Cantos, Francisco
  • González Marín, Enrique
  • Toral López, Alejandro
  • Cuesta-Lopez, Juan
  • Godoy Medina, Andrés|||0000-0002-3014-8765
  • Jiménez, David
  • García Ruiz, Francisco Javier
We present a graphene-based phase shifter for radio-frequency (RF) phase-array applications. The core of the designed phase-shifting system consists of a graphene field-effect transistor (GFET) used in a common source amplifier configuration. The phase of the RF signal is controlled by exploiting the quantum capacitance of graphene and its dependence on the terminal transistor biases. In particular, by independently tuning the applied gate-to-source and drain-to-source biases, we observe that the phase of the signal, in the super-high frequency band, can be varied nearly 200° with a constant gain of 2.5 dB. Additionally, if only the gate bias is used as control signal, and the drain is biased linearly dependent on the former (i.e., in a completely analogue operation), a phase shift of 85° can be achieved making use of just one transistor and keeping a gain of 0 dB with a maximum variation of 1.3 dB. The latter design can be improved by applying a balanced branch-line configuration showing to be competitive against other state-of-the-art phase shifters. This work paves the way towards the exploitation of graphene technology to become the core of active analogue phase shifters for high-frequency operation., Ministerio de Ciencia, Innovación y Universidades, Agencia Estatal de Investigación (AEI), European Regional Developments Fund (ERDF/FEDER), under Project TEC2017-89955-P and Project EQC2018-004963-P (MINECO/AEI/FEDER), FEDER/Junta de Andalucía-Consejería de Economía y Conocimiento under Project B-RNM-375-UGR18, European Commission through the Horizon 2020 Project Wearable Applications Enabled by Electronic Systems on Paper (WASP) under Contract 825213, Juan de la Cierva Incorporación under Grant IJCI-2017-32297 (MINECO/AEI), European Union's Horizon 2020 Research and Innovation Programme under Grant GrapheneCore2 785219 and Grant GrapheneCore3 881603, Ministerio de Ciencia, Innovación y Universidades under Grant RTI2018-097876-B-C21(MCIU/AEI/FEDER, UE), European Regional Development Funds (ERDF) through the Programa Operatiu FEDER de Catalunya 2014-2020, with the support of the Secretaria d'Universitats i Recerca of the Departament d'Empresa i Coneixement of the Generalitat de Catalunya, GraphCAT under Project 001-P-001702
Digibug. Repositorio Institucional de la Universidad de Granada
Publicación Artículo científico (JournalArticle)

Graphene BioFET sensors for SARS-CoV-2 detection: a multiscale simulation approach

  • Toral López, Alejandro
  • González Marín, Enrique
  • Godoy Medina, Andrés|||0000-0002-3014-8765
Biological Field-Effect Transistors (BioFETs) have already demonstrated enormous potential for detecting minute amounts of ions and molecules. The use of two-dimensional (2D) materials has been shown to boost their performance and to enable the design of new applications. This combination deserves special interest in the current pandemic caused by the SARS-CoV-2 virus which demands fast, reliable and cheap detection methods. However, in spite of the experimental advances, there is a lack of a comprehensive and in-depth computational approach to capture the mechanisms underlying the sensor behaviour. Here, we present a multiscale platform that combines detailed atomic models of the molecules with mesoscopic device-level simulations. The fine-level description exploited in this approach accounts for the charge distribution of the receptor, its reconfiguration when the target binds to it, and the consequences in terms of sensitivity on the transduction mechanism. The results encourage the further exploration of improved sensor designs and 2D materials combined with diverse receptors selected to achieve the desired specificity., MCIN/AEI PID2020-116518GB-I00, FEDER/Junta de Andalucia-Consejeria de Transformacion Economica, Industria, Conocimiento y Universidades PY20_00633 B-RNM-375-UGR18, European Commission 825213 945539, Spanish Government FPU16/04043, Klaus Tschira Foundation
Digibug. Repositorio Institucional de la Universidad de Granada
Publicación Artículo científico (JournalArticle)

Graphene-on-Silicon Hybrid Field-Effect Transistors

  • Fomin, Mykola
  • Pasadas Cantos, Francisco
  • González Marín, Enrique
  • Medina Rull, Alberto
  • García Ruiz, Francisco Javier
  • Godoy Medina, Andrés|||0000-0002-3014-8765
The combination of graphene and silicon in hybrid electronic devices has attracted increasing attention over the last decade. Here, a unique technology of graphene-on-silicon heterostructures as solution-gated transistors for bioelectronics applications is presented. The proposed graphene-onsilicon field-effect transistors (GoSFETs) are fabricated by exploiting various conformations of channel doping and dimensions. The fabricated devices demonstrate hybrid behavior with features specific to both graphene and silicon, which are rationalized via a comprehensive physics-based compact model which is purposely implemented and validated against measured data. The developed theory corroborates that the device hybrid behavior can be explained in terms of two independent silicon and graphene carrier transport channels, which are, however, strongly electrostatically coupled. Although GoSFET transconductance and carrier mobility are found to be lower than in conventional silicon or graphene field-effect transistors, it is observed that the combination of both materials within the hybrid channel contributes uniquely to the electrical response. Specifically, it is found that the graphene sheet acts as a shield for the silicon channel, giving rise to a nonuniform potential distribution along it, which impacts the transport, especially at the subthreshold region, due to non-negligible diffusion current., MCIN/AEI PID2020-116518GB-I00, FEDER/Junta de Andalucia-Consejeria de Transformacion Economica, Industria, Conocimiento y Universidades A-TIC-646-UGR20 B-RNM-375-UGR18 PY20_00633, European Commission 825213, PAIDI 2020, European Social Fund Operational Programme 2014-2020 20804, MCIN/AEI/PTA grant PTA2020-018250-I, Projekt DEAL
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On the Electrochemical Activation of Nanoporous Reduced Graphene Oxide Electrodes Studied by In Situ/Operando Electrochemical Techniques

  • Bernicola, María del Pilar
  • Lounasvuori, Mailis
  • Padilla-Pantoja, Jessica
  • Santiso, José
  • Debiemme-Chouvy, Catherine
  • Perrot, Hubert
  • Petit, Tristan
  • Garrido, Jose A.
  • Corro, Elena del
Due to the difficult access of the electrolyte into the nanoconfined space of nanoporous reduced graphene oxide (rGO) electrodes, achieving the optimal electrochemical performance of these devices becomes a challenge. In this work, the dynamics of interfacial-governed phenomena are investigated during a voltage-controlled electrochemical activation of nanoporous rGO electrodes that leads to an enhanced electrochemical performance in terms of areal capacitance and electrochemical impedance. In situ/operando characterization techniques are used to reveal the dynamics of the irreversible material changes introduced during the activation process, including ionic diffusion and water confinement within the nanopores, along with the reduction of oxygenated groups and the decrease of the rGO interlayer distance. Furthermore, operando techniques are used to uncover the origin of the complex polarization-dependent dynamic response of rGO electrodes. The study reveals that the reversible protonation/deprotonation of remaining functional groups and the cation electro-adsorption/desorption process in the graphene basal plane govern the pseudocapacitive performance of nanoporous rGO electrodes. This work brings new understanding of the complex interplay between surface chemistry, ion confinement, and desolvation processes occurring during electrochemical cycling in nanoporous rGO electrodes, offering new insights for designing high-performing electrodes based on nanoporous rGO., Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD programme; This work has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement N° 825213 (WASP); the European Union's Horizon 2020 research and innovation programme under grant agreement N° 881603 (GrapheneCore3); the European Union's Horizon 2020 research and innovation programme under grant agreement N° 101070865 (MINIGRAPH); and MCIN/ AEI /10.13039/501100011033 under grant agreement PID2020-113663RB-I00. E.d.C. acknowledges the RYC2019-027879-I Grant funded by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The impact of graphene oxide nanosheet lateral dimensions on the electrochemical performance of nanoporous graphene-based electrodes

  • Bernicola, María del Pilar
  • Madrid-Gimeno, Miquel
  • Murillo-Cremaes, Nerea
  • Battisti, Tommaso
  • Lozano, Neus
  • Kostarelos, Kostas
  • Garrido, Jose A.
  • Corro, Elena del
Electrodes based on nanoporous reduced graphene oxide (rGO) have been developed as the interfacing component in different designs of neural implants in a variety of therapeutic and monitoring applications. The starting graphene oxide (GO) nanosheets lateral dimensions influenced the staking order, roughness and thickness of the derived rGO films, including the formation of nanochannels. Apart from the morphological differences observed, the GO lateral dimension also impacted on the film conductivity, and on the overall electrochemical performance of the rGO electrodes. While electrodes fabricated from nano-scale GO sheets (us-GO) only showed diffusion-limited impedance in the high frequency regime, the electrical response of electrodes from micron-scale GO sheets (L-GO) was limited by diffusion in the whole frequency range due to a less disordered nanoporous film. At 1 kHz, us-GO electrodes, due to their larger capacitance, presented a higher charge injection limit (Qinj.l.) than L-GO electrodes. Due to the higher conductivity of L-GO, electrodes exhibited half the ohmic drop (IR) of electrodes made of us-GO. This work highlights the importance of GO nanosheet engineering to optimize the performance of rGO electrodes in terms of Qinj.l. and IR, two key figures of merit in neuroelectronic applications., Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD programme. This work has received funding from the European Union's Horizon 2020 Research and Innovation Programme under grant agreement No 825213 (WASP); the European Union's Horizon 2020 research and innovation programme under grant agreement No 881603 (GrapheneCore3); the European Union's Horizon 2020 research and innovation programme under grant agreement No 101070865 (MINIGRAPH); and MCIN/AEI /10.13039/501100011033 under grant agreement PID2020-113663RB-I00. E.d.C. acknowledges the RYC2019-027879-I Grant funded by MCIN/AEI/10.13039/501100011033. The ICN2 is funded by the CERCA programme/Generalitat de Catalunya and has been supported by the Severo Ochoa Centres of Excellence programme [SEV-2017-0706] and is currently supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, both funded by MCIN and MCIU/AEI/10.13039.501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (SEV-2017-0706), Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

On the Electrochemical Activation of Nanoporous Reduced Graphene Oxide Electrodes Studied by In Situ/Operando Electrochemical Techniques

  • Bernicola, María del Pilar|||0000-0002-8124-2567
  • Lounasvuori, Mailis|||0000-0001-9738-4642
  • Padilla-Pantoja, Jessica|||0000-0002-7769-7753
  • Santiso, José|||0000-0003-4274-2101
  • Debiemme-Chouvy, Catherine
  • Perrot, Hubert|||0000-0002-3930-2968
  • Petit, Tristan|||0000-0002-6504-072X
  • Garrido, Jose|||0000-0001-5621-1067
  • Del Corro, Elena|||0000-0001-6452-9139
Due to the difficult access of the electrolyte into the nanoconfined space of nanoporous reduced graphene oxide (rGO) electrodes, achieving the optimal electrochemical performance of these devices becomes a challenge. In this work, the dynamics of interfacial-governed phenomena are investigated during a voltage-controlled electrochemical activation of nanoporous rGO electrodes that leads to an enhanced electrochemical performance in terms of areal capacitance and electrochemical impedance. In situ/operando characterization techniques are used to reveal the dynamics of the irreversible material changes introduced during the activation process, including ionic diffusion and water confinement within the nanopores, along with the reduction of oxygenated groups and the decrease of the rGO interlayer distance. Furthermore, operando techniques are used to uncover the origin of the complex polarization-dependent dynamic response of rGO electrodes. The study reveals that the reversible protonation/deprotonation of remaining functional groups and the cation electro-adsorption/desorption process in the graphene basal plane govern the pseudocapacitive performance of nanoporous rGO electrodes. This work brings new understanding of the complex interplay between surface chemistry, ion confinement, and desolvation processes occurring during electrochemical cycling in nanoporous rGO electrodes, offering new insights for designing high-performing electrodes based on nanoporous rGO.