Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Self-Pixelation Through Fracture in VO2 Thin Films

  • Rodríguez, Laura
  • Del Corro, Elena
  • Conroy, Michele
  • Moore, Kalani
  • Sandiumenge, Felip
  • Domingo, Neus
  • Santiso, José
  • Catalán, Gustau
Vanadium dioxide (VO2) is an archetypal Mott material with a metal–insulator transition (MIT) at near room temperature. In thin films, this transition is affected by substrate-induced strain but as film thickness increases, the strain is gradually relaxed and the bulk properties are recovered. Epitaxial films of VO2 on (001)-oriented rutile titanium dioxide (TiO2) relax substrate strain by forming a network of fracture lines that crisscross the film along well-defined crystallographic directions. This work shows that the electronic properties associated with these lines result in a pattern that resembles a “street map” of fully strained metallic VO2 blocks separated by insulating VO2 stripes. Each block of VO2 is thus electronically self-insulated from its neighbors, and its MIT can be locally induced optically with a laser, or electronically via the tip of a scanning probe microscope so that the films behave functionally as self-patterned pixel arrays., This work was supported from the Spanish Ministry of Economy, Industry and Competitiveness (project: MAT2016- 77100-C2-1-P), the Catalan AGAUR agency for 2017SGR, and the Science Foundation Ireland (SFI 16/US/3344). ICN2 is funded by the CERCA programme/Generalitat de Catalunya and the Severo Ochoa programme (SEV-2017-0706). L.R. particularly acknowledges the support of the Severo Ochoa program and ICN2 for her Ph.D. grant. E.d.C. acknowledges the Spanish “Juan de la Cierva” grant (JC-2015-25201) and the research project FIS2017-85787. M.C. acknowledges funding from SFI Industry Fellowship (18/IF/6282)., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

P-type ultrawide-band-gap spinel ZnGa2O4, new perspectives for energy electronics

  • Chikoidze, Ekaterine|||0000-0002-6566-4639
  • Sartel, Corinne.
  • Madaci, Ismail|||0000-0003-4698-0086
  • Mohamed, Hagar
  • Vilar, Christele
  • Ballesteros, Belén|||0000-0002-1958-8911
  • Belarre Triviño, Francisco Javier
  • Del Corro, Elena|||0000-0001-6452-9139
  • Vales Castro, Pablo|||0000-0001-9181-1789
  • Sauthier, Guillaume|||0000-0003-3566-3878
  • Li, Lijie|||0000-0003-4630-7692
  • Jennings, Mike|||0000-0003-3270-0805
  • Sallet, Vincent|||0000-0003-0949-8397
  • Dumont, Yves|||0000-0002-0739-428X
  • Perez-Tomas, Amador|||0000-0002-0551-3142
The family of spinel compounds is a large and important class of multifunctional materials of general formulation ABX with many advanced applications in energy and optoelectronic areas such as fuel cells, batteries, catalysis, photonics, spintronics, and thermoelectricity. In this work, it is demonstrated that the ternary ultrawide-band-gap (∼5 eV) spinel zinc gallate (ZnGaO) arguably is the native p-type ternary oxide semiconductor with the largest E value (in comparison with the recently discovered binary p-type monoclinic β-GaO oxide). For nominally undoped ZnGaO the high-temperature Hall effect hole concentration was determined to be as large as p = 2 × 10 cm, while hole mobilities were found to be μ = 7-10 cm/(V s) (in the 680-850 K temperature range). An acceptor-like small Fermi level was further corroborated by X-ray spectroscopy and by density functional theory calculations. Our findings, as an important step toward p-type doping, opens up further perspectives for ultrawide-band-gap bipolar spinel electronics and further promotes ultrawide-band-gap ternary oxides such as ZnGaO to the forefront of the quest of the next generation of semiconductor materials for more efficient energy optoelectronics and power electronics.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Improved metal-graphene contacts for low-noise, high-density microtransistor arrays for neural sensing

  • Schaefer, Nathan|||0000-0002-2392-3858
  • Garcia Cortadella, Ramon|||0000-0002-1506-6534
  • Bonaccini Calia, Andrea|||0000-0002-7873-4296
  • Mavredakis, Nikolaos|||0000-0003-3630-9416
  • Illa, Xavi|||0000-0002-3212-1128
  • Masvidal Codina, Eduard|||0000-0002-9579-8603
  • De la Cruz, Jose|||0000-0001-9656-9653
  • Del Corro, Elena|||0000-0001-6452-9139
  • Rodríguez Domínguez, Laura|||0000-0002-6669-1962
  • Prats Alfonso, Elisabet|||0000-0002-7320-1896
  • Bousquet, Jessica|||0000-0001-5721-8092
  • Martínez-Aguilar, Javier
  • Pérez-Marín, Antonio Pablo|||0000-0003-1843-8273
  • Hébert, Clément|||0000-0001-9667-033X
  • Villa, Rosa|||0000-0003-2735-3204
  • Jiménez, David|||0000-0002-8148-198X
  • Guimerà Brunet, Anton|||0000-0003-1768-3293
  • Garrido, Jose|||0000-0001-5621-1067
Poor metal contact interfaces are one of the main limitations preventing unhampered access to the full potential of two-dimensional materials in electronics. Here we present graphene solution-gated field-effect-transistors (gSGFETs) with strongly improved linearity, homogeneity and sensitivity for small sensor sizes, resulting from ultraviolet ozone (UVO) contact treatment. The contribution of channel and contact region to the total device conductivity and flicker noise is explored experimentally and explained with a theoretical model. Finally, in-vitro recordings of flexible microelectrocorticography (μ-ECoG) probes were performed to validate the superior sensitivity of the UVO-treated gSGFET to brain-like activity. These results connote an important step towards the fabrication of high-density gSGFET μ-ECoG arrays with state-of-the-art sensitivity and homogeneity, thus demonstrating the potential of this technology as a versatile platform for the new generation of neural interfaces.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Self-pixelation through fracture in VO2 thin films

  • Rodríguez Domínguez, Laura|||0000-0002-6669-1962
  • Del Corro, Elena|||0000-0001-6452-9139
  • Conroy, Michele
  • Moore, Kalani
  • Sandiumenge Ortiz, Felip|||0000-0003-1336-1529
  • Domingo Marimon, Neus|||0000-0002-5229-6638
  • Santiso, José|||0000-0003-4274-2101
  • Catalan, Gustau|||0000-0003-0214-4828
Vanadium dioxide (VO2) is an archetypal Mott material with a metal-insulator transition (MIT) at near room temperature. In thin films, this transition is affected by substrate-induced strain but as film thickness increases, the strain is gradually relaxed and the bulk properties are recovered. Epitaxial films of VO2 on (001)-oriented rutile titanium dioxide (TiO2) relax substrate strain by forming a network of fracture lines that crisscross the film along well-defined crystallographic directions. This work shows that the electronic properties associated with these lines result in a pattern that resembles a "street map" of fully strained metallic VO2 blocks separated by insulating VO2 stripes. Each block of VO2 is thus electronically self-insulated from its neighbors, and its MIT can be locally induced optically with a laser, or electronically via the tip of a scanning probe microscope so that the films behave functionally as self-patterned pixel arrays.
Dipòsit Digital de Documents de la UAB
Publicación Artículo preliminar (WorkingPaper)

Heat dissipation in few-layer MoS2 and MoS2/hBN heterostructure

  • Arrighi, Aloïs|||0000-0002-9774-852X
  • Del Corro, Elena|||0000-0001-6452-9139
  • Navarro Urrios, Daniel|||0000-0001-9055-1583
  • Costache, Marius Vasile|||0000-0001-7432-6175
  • Sierra, Juan F.|||0000-0002-5438-0534
  • Watanabe, Kenji|||0000-0003-3701-8119
  • Taniguchi, Takashi|||0000-0002-1467-3105
  • Garrido, Jose|||0000-0001-5621-1067
  • Valenzuela, Sergio O.|||0000-0002-4632-8891
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
  • Sledzinska, Marianna|||0000-0001-8592-1121
State-of-the-art fabrication and characterization techniques have been employed to measure the thermal conductivity of suspended, single-crystalline MoS2 and MoS2/hBN heterostructures. Two-laser Raman scattering thermometry was used combined with real time measurements of the absorbed laser power, which allowed us to determine the thermal conductivities without any assumptions. Measurements on MoS2 layers with thicknesses of 5 and 14 exhibit thermal conductivity in the range between 12 and 24 Wm-1K-1. Additionally, after determining the thermal conductivity of a selected MoS2 sample, an hBN flake was transferred onto it and the effective thermal conductivity of the heterostructure was subsequently measured. Remarkably, despite that the thickness of the hBN layer was less than a third of the thickness of the MoS2 layer, the heterostructure showed an almost eight-fold increase in the thermal conductivity, being able to dissipate more than 10 times the laser power without any visible sign of damage. These results are consistent with a high thermal interface conductance between MoS2 and hBN and an efficient in-plane heat spreading driven by hBN. Indeed, we estimate G 70 MWm-2K-1 which is significantly higher than previously reported values. Our work therefore demonstrates that the insertion of hBN layers in potential MoS2 based devices holds the promise for efficient thermal management.