Pasar al contenido principal

NUEVA TECNOLOGIA NO INVASIVA PARA INHIBICION DE CRECIMIENTO DE TUMORES SOLIDOS MEDIANTE ULTRASONIDOS DE BAJA INTENSIDAD

PID2021-128985OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Low-intensity continuous ultrasound to inhibit cancer cell migration

  • González Gómez, Icíar
  • Luzuriaga, Jon
  • Valdivieso, Alba
  • Candil, Manuel
  • Frutos, Jesús
  • López, Jaime
  • Hernández, Luis
  • Rodríguez-Lorenzo, Luis M.
  • Yaguë-Jiménez, Virginia
  • Blanco-Murillo, José Luis
  • Pinto, Alberto
  • Earl, Julie
In recent years, it has been verified that collective cell migration is a fundamental step in tumor spreading and metastatic processes. In this paper, we demonstrate for the first time how low-intensity ultrasound produces long-term inhibition of collective migration of epithelial cancer cells in wound healing processes. In particular, we show how pancreatic tumor cells, PANC-1, grown as monolayers in vitro respond to these waves at frequencies close to 1 MHz and low intensities (<100mWcm−2) for 48–72 h of culture after some minutes of a single ultrasound irradiation. This new strategy opens a new line of action to block the spread of malignant cells in cancer processes. Despite relevant spatial variations of the acoustic pressure amplitude induced in the assay, the cells behave as a whole, showing a collective dynamic response to acoustic performance. Experiments carried out with samples without previous starving showed remarkable effects of the LICUs from the first hours of culture, more prominent than those with experiments with monolayers subjected to fasting prior to the experiments. This new strategy to control cell migration demonstrating the effectiveness of LICUS on not starved cells opens a new line of action to study effects of in vivo ultrasonic actuation on tumor tissues with malignant cells. This is a proof-of-concept study to demonstrate the physical effects of ultrasound stimulation on tumor cell migration. An in-depth biological study of the effects of ultrasounds and underlying biological mechanisms is on-going but out of the scope of this article., Project PID2021-128985OB-I00 funded by MCIN/ AEI/10.13039/501100011033/“FEDER Una manera de hacer Europa and AEI, FEDER , UE DPI 2017-90147-R and Intramural call for new research projects for clinical researchers and emerging research groups IRYCIS (2018/0240)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Acoustophoretic trapping of particles by bubbles in microfluidics

  • González Gómez, Icíar
  • Candil, Manuel
  • Luzuriaga, Jon
8 páginas, 4 figuras, We present in this paper a simple method to produce strategic acoustic particle capture sites in microfluidic channels in a controlled way. Air bubbles are intermittently injected into a micro-capillary with rectangular cross section during a flow motion of liquid suspensions containing micron-sized particles or particles to create bubble-defined “micro-gaps” with size close to 200 µm and spheroidal geometry. The establishment of a 3D standing acoustic wave inside the capillary at a frequency close to 1 MHz produces different radiation forces on solid particles and bubbles, and acoustic streaming around the bubble. While the sample flows, part of the particles collect along the acoustic pressure node established near the central axis and continue circulating aligned through the capillary until reaching the end, where are released enriched. Meanwhile, the bubble travels very fast toward positions of maximum pressure amplitude beside the channel wall, driven by Bjerkness forces, and attach to it, remaining immovable during the acoustic actuation. Some particles adhere to its membrane trapped by the acoustic streaming generated around the oscillating bubble. Changes of frequency were applied to analyze the influence of this parameter on the bubble dynamics, which shows a complete stability once attached to the channel wall. Only increasing the flow motion induces the bubble displacements. Once reached the open air at the end of the capillary, the bubble disappears releasing the trapped particles separated from their initial host suspension with a purity degree. The device presents a very simple geometry and a low-cost fabrication., This work is financed by the Spanish National Plan project PID2021-128985OB-I00 funded by the Spanish Ministery of Science and Innovation MICINN and CSIC-Intramural project, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Selection and Optimization of a Bioink Based on PANC-1- Plasma/Alginate/Methylcellulose for Pancreatic Tumour Modelling

  • Banda Sánchez, C.
  • Cubo-Mateo, Nieves
  • Saldaña, Laura
  • Valdivieso, Alba
  • Earl, Julie
  • González Gómez, Icíar
  • Rodríguez-Lorenzo, Luis M.
3D bioprinting involves using bioinks that combine biological and synthetic materials. The selection of the most appropriate cell-material combination for a specific application is complex, and there is a lack of consensus on the optimal conditions required. Plasma-loaded alginate and alginate/methylcellulose (Alg/MC) inks were chosen to study their viscoelastic behaviour, degree of recovery, gelation kinetics, and cell survival after printing. Selected inks showed a shear thinning behavior from shear rates as low as 0.2 s􀀀1, and the ink composed of 3% w/v SA and 9% w/v MC was the only one showing a successful stacking and 96% recovery capacity. A 0.5 106 PANC-1 cell-laden bioink was extruded with an Inkredible 3D printer (Cellink) through a D = 410 m tip conical nozzle into 6-well culture plates. Cylindrical constructs were printed and crosslinked with CaCl2. Bioinks suffered a 1.845 Pa maximum pressure at the tip that was not deleterious for cellular viability. Cell aggregates can be appreciated for the cut total length observed in confocal microscopy, indicating a good proliferation rate at different heights of the construct, and suggesting the viability of the selected bioink PANC-1/P-Alg3/MC9 for building up three-dimensional bioprinted pancreatic tumor constructs., PID2021-128985OB-I00 funded by MCIN/AEI/10.13039/501100011033/FEDER Una manera de hacer Europa., Grant PI22/00939 from ISCIII-FEDER, Ministerio de Ciencia, Innovación y Universidades (MICINN)-AES., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

INFLUENCIA DE LAS PROPIEDADES VISCOELÁSTICAS DEL HIDROGEL EN LA MIGRACIÓN COLECTIVA DE LAS CÉLULAS PANC-1

  • Elena Peinador Pedregal
El adenocarcinoma ductal pancreático se detecta una vez se alcanza el estado metastásico grave, por lo que presenta una baja tasa de supervivencia a nivel mundial. El objetivo principal de este proyecto es la creación de constructos tridimensionales (hidrogeles) con distinta rigidez que permitan estudiar la migración colectiva de células tumorales pancreáticas (PANC-1) y el consecuente proceso de metástasis. El objetivo secundario es analizar la capacidad de biompresión de los hidrogeles (biotintas). Se prepararon, y caracterizaron mediante reología, cuatro biotintas a base de alginato y poloxámero 188 con propiedades viscoelásticas diferentes. Para los estudios de migración, las biotintas se colocaron en Transwells sin medio de proliferación. Tras 48 horas de incubación, se contó el número de células mediante Beckman Coulter, Z2. Se uso el microscopio confocal (LEICA TCS SPE) para analizar el área ocupada por células vivas. El porcentaje de migración de las células PANC-1 se ve favorecido en los hidrogeles con valores más bajos de su módulo elástico (G‘). Se ha observado también la influencia en la migración del módulo viscoso (G’’), por lo que en estudios posteriores convendría considerar el comportamiento viscoelástico general. Sin embargo, en nuestros resultados la influencia del módulo elástico domina frente al viscoso., Proyecto PID2021-128985OB-I00 financiado por MICIN/AEI /10.13039/501100011033/ y por FEDER Una manera de hacer Europa., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Design and manufacturing of maxillofacial implants trough 3D bioprinting

  • Sara Román Ceballos
Periodontal disease and teeth loss are the leading causes of jawbone tissue loss, the former resulting on facial collapse if left untreated along with communication and eating difficulties. Large research efforts are systematically deployed to ward increasing the effectiveness and reducing the risks of bone tissue grafts to substitute the tissue loss in the area. However, autogenic grafts even if completely successful presents a risk to the patient who has to overcome two surgeries; and allograft and xenograft present immune rejection and disease transmission concerns as well as the availability problems. Recent novel studies involving bone graft decellularization and recellularization techniques have been proposed. Such methods would eliminate immune rejection of the implanted graft. However, it in its current form, decellularization process is tedious and needs to be improved in order to successfully eliminate all DNA traces from the graph while preserving the extracellular matrix structure. In addition, it does not eliminate the stock problem surrounding tissue bone graft as an existing bone is needed in order to decellularize it. Other techniques being investigated right now include drug delivery to accelerate the regeneration process, but those can only be applied when an existing bone allograft/xenograft has been implanted and thus present the same concerns as those techniques. Here we propose a 3D bioprinting technologies for the design of maxillofacial implants that could potentially promote bone tissue regeneration. We propose to take advantage of bioactive biomaterials (Hydroxyapatite) and cell embedding techniques inside bioinks, to be able to produce bionks thar could be bioprinted into custom designed live tissue engineered models. The fabrication process of the proposed bioinks was optimized and it was determined whether they are compatible with both extrusion bioprinting and cell growth and proliferation (biocompatible). Our results indicate that letting Methylcellulose (MC) powder fully dissolve (up to seven days at 4ºC) before mixing it with the rest of the proposed bioink biomaterials is key to provide the proposed bioinks with the most favorable properties for extrusion 3D bioprinting. Moreover, our results indicate successful biocompatibility and negligible effects on cell viability caused by bioprinting of cells, confirmed with two different cell lines Fibroblasts and Bone marrow Stem cells. Improvements made in this project on the bioink production for the design of maxillofacial implants paves the way towards the highly sought-after bone regeneration promoting implants for maxillofacial bone, improving buccal health in the general population, Proyecto PID2021-128985OB-I00 financiado por MICIN/AEI /10.13039/501100011033/ y por FEDER Una manera de hacer Europa, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis de maestría (MasterThesis)

Síntesis de fosfatos de calcio aplicada a la producción de andamios para la regeneración ósea maxilofacial

  • Carlos Javier Beigveder Núñez
La Hidroxiapatita (HA) es un material biocompatible y bioactivo con capacidad de integrarse en el organismo, promoviendo la formación de nuevo tejido óseo. Debido a su alta resistencia mecánica y baja reactividad, este fosfato cálcico resulta una excelente opción para su uso en implantología odontológica. Conociendo esto, este Trabajo Fin de Máster (TFM) tiene como objetivo general la síntesis de novedosos fosfatos de calcio de Hidroxiapatita (HA) de baja cristalinidad para la producción de andamios para la regeneración ósea maxilofacial. Para ello, se desarrollaron diferentes productos de HA dopadas con iones osteoinductivos de Magnesio para mejorar las propiedades biomecánicas del material, variando la concentración de Calcio y Magnesio mediante un método de vía húmeda, controlando las condiciones de temperatura, pH y tiempos de reacción. Para caracterizar y estudiar las propiedades físicas y químicas de la HA obtenida, se han empleado diferentes técnicas de análisis incluyendo Espectroscopía Infrarroja por Transformada de Fourier, Difracción de Rayos X y Microscopía Electrónica de Barrido, tomándose en cuenta aspectos fundamentales como la estructura molecular y el tamaño de partícula. Una vez caracterizado el producto, se ha combinado junto a un polímero biocompatible como lo es la Policaprolactona (PCL) para la fabricación de un filamento mediante un método de extrusión. Este material, a futuro se empleará para la fabricación de andamios por Fabricación Aditiva (FA) mediante la técnica de Fabricación de Filamento Fundido (FFF). Se encontró que el producto resultante presentaba una distribución homogénea de partículas, con una morfología adecuada y una estructura cristalina bien definida. No obstante, se encontraron fases secundarias, con aparición de grupos fosfatos y la presencia de brusita. Estos hallazgos indican que el material sintetizado tiene una estructura similar a la HA, lo que sugiere propiedades bioactivas y la capacidad de promover la formación de nuevo tejido óseo. Estudios adicionales en ensayos clínicos serían necesarios para comprender mejor las características y la interacción de este material ante tejido vivo., Proyecto PID2021-128985OB-I00 financiado por MICIN/AEI /10.13039/501100011033/ y por FEDER Una manera de hacer Europa, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis de maestría (MasterThesis)

BIOTINTAS HÍBRIDAS PARA BIOIMPRESIÓN DE MODELOS PARA DIFERENTES TEJIDOS

  • Nerea Arina Paños
Proyecto PID2021-128985OB-I00 financiado por MICIN/AEI /10.13039/501100011033/ y por FEDER Una manera de hacer Europa, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of Hydroxyapatite and Gelatin Content on Crosslinking Dynamics and HDFn Cell Viability in Alginate Bioinks for 3D Bioprinting

  • Anaya-Sampayo, Lina María
  • Roa, Nelly S
  • Martínez-Cardozo, Constanza
  • García-Robayo, Dabeiba Adriana
  • Rodríguez-Lorenzo, Luis M.
This study investigates how varying concentrations of hydroxyapatite (OHAp) and the addition of gelatin influence the ionic crosslinking time of alginate-based bioinks, as well as the shear stress experienced by neonatal human dermal fibroblasts (HDFn) during extrusion. These factors are crucial for validating bioinks and developing viable 3D bioprinted models. Four bioink formulations were created with a 50/50 ratio of alginate to gelatin, incorporating different calcium phosphate concentrations (0%, 1%, 5%, and 10%). The bioink compositions were confirmed via Fourier Transform Infrared (FT-IR) spectroscopy, and rheological analyses evaluated their pseudoplastic behavior, printability limits, and crosslinking times. The results indicated a notable increase in the consistency index (k) from 0.32 for the 0% OHAp formulation to 0.48 for the 10% OHAp formulation, suggesting improved viscoelastic properties. The elastic modulus recovery after crosslinking rose significantly from 245 Pa to 455 Pa. HDFn experienced a shear stress of up to 1.5436 Pa at the tip during extrusion with the HDFn-ALG5-GEL5-OHAp10 bioinks, calculated at a shear rate as low as 2 s−1. Viability assays confirmed over 70% cell viability 24 h post-extrusion and 92% viability after 7 days for the 10% OHAp formulation, highlighting the potential of hydroxyapatite-enhanced bioinks in tissue engineering applications., This research was funded by MCIN/AEI/10.13039/501100011033/FEDER. Una manera de hacer Europa, grant number PID2021-128985OB-I00, and Pontificia Universidad Javeriana under the project entitled “Design and characterization of a bioprintable scaffold for bone tissue regeneration”, grant number ID20551., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis de maestría (MasterThesis)

Bioimpresión 3D de modelos óseos basados en biotintas cargadas con hidroxiapatita

  • Carlos Escudero Rodríguez
The main objective of this study is to create and analyze biological inks containing strontium-containing hydroxyapatite (Sr-HA) for 3D printing of accurate bone models. This study aims to improve both the osteogenic and mechanical properties and cell viability of bioinks, with a view to their future use in bone regeneration. Hydroxyapatite (HA) was prepared through a meticulous controlled precipitation process, then endowed with strontium using specific incorporation methods. FTIR, XRD and TGA were used to analyze the materials, the structure of the HA was confirmed, improvements in its crystallinity and thermal stability were confirmed. The bioinks developed were based on alginate and gelatin gels, incorporating HA and Sr-HA to evaluate their rheological properties and their performance in 3D bioprinting. Viscosity, shear stress, and rotational recovery tests were performed to analyze the viability of these bioinks in the manufacture of scaffolds. The results indicated that the addition of Sr-HA significantly improved the viscosity and structural stability of the bioinks, favoring the printing of accurate and reproducible bone models. The cell viability of the bioprinted models was evaluated by the Alamar Blue assay, demonstrating that bioinks with Sr-HA promoted greater cell proliferation compared to bioinks that did not contain administered Sr, suggesting a more favorable environment for bone regeneration. In conclusion, the combination of hydroxyapatite with strontium and optimized bioinks represents a promising advance in the field of 3D bioprinting for applications in regenerative medicine, offering a potentially effective solution for the repair of complex bone tissues, MCIN/AEI/10.13039/501100011033/FEDER. Una manera de hacer Europa, grant number PID2021-128985OB-I00, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis de maestría (MasterThesis)

Influencia de la viscoelasticidad de biotintas en la migración celular

  • Héctor Navas Reig
PID2021-128985OB-I00 funded byMCIN/AEI/10.13039/501100011033/FEDER Una manera de hacer Europa., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis de maestría (MasterThesis)

Estudio de parámetros de printabilidad en biotintas para modelos tisulares impresos en 3D”

  • Adriana Richter Lozada
Este Trabajo Fin de Máster se centra en el análisis y optimización de biotintas para bioimpresión 3D, combinando materiales naturales y sintéticos como poloxámeros, alginato, gelatina, metilcelulosa e hidroxiapatita. El estudio aborda aspectos clave como la caracterización reológica, la evaluación de la printabilidad y la viabilidad celular en modelos tridimensionales, utilizando líneas celulares PANC-1. Se identificaron formulaciones con comportamiento termosensible y capacidad de recuperación estructural tras la extrusión, así como buena fidelidad geométrica y estabilidad durante el cultivo celular. Además, se evaluó el impacto socioeconómico y legal de esta tecnología, analizando su proyección en el ámbito clínico, farmacéutico y de investigación biomédica. Los resultados obtenidos no solo validan la compatibilidad biológica de las biotintas desarrolladas, sino que sientan las bases para futuras aplicaciones funcionales en medicina personalizada, modelos tumorales y generación de tejidos bioimpresos más complejos., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis de maestría (MasterThesis)

Strontium-doped apatite enriched bioinks: biological and rheological evaluation of 3D bioprinted constructs

  • Fiona Ye Rojo Acero
Developing adequate bioinks for 3D bioprinting is crucial for the progress in tissue engineering and regenerative medicine. In particular, in the domain of bone tissue engineering, it is essential not only to mimic the mechanical strength and mineral strontiumcontent of bone, but also to provide an osteoconductive environment that facilitates the growth and differentiation of osteoblasts. For this purpose, the main goal of this study is to formulate strontium-doped hydroxyapatite (Sr-OHAp)–enriched bioinks which are suitable for printing and promote cell viability and proliferation in the context of bone regeneration applications. Sr-OHAp particles were synthesized using chemical precipitation and surface adsorption techniques, followed by characterization to confirm their compatibility with extrusion bioprinting. Bioink formulations were prepared using sodium alginate and methyl cellulose, and were optimized for their rheological and printability properties. The rheological assessment revealed that all compositions exhibited shear-thinning and thixotropic behavior, with those containing Sr-OHAp showing enhanced shape fidelity and layer stacking during printing. Cell viability assays conducted with PANC-1 cells demonstrated that the inclusion of Sr-OHAp particles did not compromise cell survival and even improved viability after a period of 7 days. These findings suggest that Sr-OHAp-enriched bioinks are promising candidates for bone tissue engineering, integrating favorable mechanical characteristics with biocompatibility, MCIN/AEI/10.13039/501100011033/FEDER Una manera de hacer Europa., Peer reviewed