Pasar al contenido principal

MATERIALES AVANZADOS Y ANTENAS PARA SISTEMAS DE COMUNICACIONES RECONFIGURABLES

PID2022-136869NB-C33

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Designing X-Band Lenses With the Adjoint Method and 3-D Printing Techniques

  • Vico Bondía, Felipe|||0000-0003-1292-3657
  • Jiménez-Pérez, Luis Daniel
  • Cabedo Fabres, Marta|||0000-0002-3370-1802
  • Bachiller Martin, Maria Carmen|||0000-0002-5518-5060
  • Voronov, Aleksandr Andreyevich|||0009-0008-4508-4400
[EN] In this study, we employ the adjoint method to design a Gradient Index (GRIN) lens at 10 GHz, optimizing the dielectric constant at each point to meet specific goal functions. Our optimization framework incorporates a 2D FFT-integral equation solver, delivering solutions within seconds. The entire optimization process is completed in just minutes, presenting a highly efficient approach to lens design. The optimized lens is fabricated using advanced 3D printing techniques, ensuring high precision and cost-effective manufacturing. The resulting design features a unique ring-shaped lens with a central piece of lower contrast, weighing a total of 207 grams and achieving an aperture efficiency of 55.9% as experimentally measured, confirming the effectiveness of the proposed method. The 3D printing process facilitates the rapid prototyping of such GRIN lenses, demonstrating its potential for applications requiring lightweight and compact designs. This approach opens avenues for further optimization and practical applications in communication systems and beyond., This work was supported in part by MCIN through the European Union NextGenerationEU (PRTR-C17.I1); in part by the Generalitat Valenciana under Project MAOCOM-6G (Code: MFA/2022/056); in part by the Agencia Valenciana de la Innovacion under Project INNEST/2022/124; and in part by the Ministerio de Ciencia e Innovacion under Project PID2022-136869NB-C33.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Additive Manufacturing of Variable Density Lenses for Radio Frequency Communications in X-Band

  • Voronov, Aleksandr Andreyevich|||0009-0008-4508-4400
  • Bachiller Martin, Maria Carmen|||0000-0002-5518-5060
  • Vico Bondía, Felipe|||0000-0003-1292-3657
  • Penaranda-Foix, Felipe L.|||0000-0003-4012-0763
  • Ferrer, Álvaro
  • Sempere, Lluc
  • Kronberger, Rainer
[EN] This paper presents three realizations of a complete set with a horn antenna and a focusing Gradient Index (GRIN) lens in X-band. The set was specifically designed for advancing additive manufacturing (AM) of polymers with different materials and techniques. The set has three constituent parts: a horn antenna, a support, and a lens. The horn antenna is the active element and must be electrically conductive; it was manufactured with Rigid10K acrylic resin and subsequently metallized using an electroless process. The support needed to be light, robust, and electrically transparent, so that Polyamide 11 (PA11) was used. The lens realization was intended for a dielectric material whose permittivity varies with its density. Therefore, the dielectric permittivity and loss tangent of different polymeric materials used in AM at 2.45, 6.25, and 24.5 GHz were measured. In addition, stochastic and gyroid mesh structures have been studied. These structures allow for printing a volume that presents porosity, enabling control over material density. Measuring the dielectric characteristics of each material with each density enables the establishment of graphs that relate them. The sets were then manufactured, and their frequency response and radiation diagram were measured, showing excellent results when compared with the literature., This work has been funded by Agencia Valenciana de la Innovacion through the research project INNEST/2022/124; FEDER, EU: PID2022-136590OB-C41/AEI/10.13039/501100011033; European Union NextGenerationEU project PRTR-C17.I1 as part of the Advanced Materials program supported by Ministerio de Ciencia e Innovacion, Generalitat Valenciana project: MAOCOM-6G, Code: MFA/2022/056 and Ministerio de Ciencia e Innovacion project PID2022-136869NB-C33.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Spherical and Aspherical Lenses for Boosting the Performance of Terahertz Imaging Systems

  • Abidi, El Hadj
  • Calvo-Gallego, Jaime
  • Schulman, Alejandro
  • Minin, Oleg V.
  • Minin, Igor V.
  • Velázquez-Pérez, Jesús E.
  • Meziani, Yahya Moubarak
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
[EN] A comprehensive study on the enhancement of terahertz (THz) detection through the terajet effect is performed using mesoscale dielectric lenses of different shapes and sizes. Polytetrafluoroethylene (PTFE) lenses, including spherical, aspherical, and cubic geometries, are fabricated and evaluated at frequencies of 0.15 and 0.3 THz. The lenses show enhanced responsivity and reduced noise-equivalent power, with performance characteristics strongly dependent on frequency and shape. Aspherical lenses achieve superior spatial resolution at 0.3 THz, characterized by the smallest spot sizes and full width at half maximum. Although with a bigger spot size, spherical lenses show an increase of responsivity signal of a factor of 1.5 with respect to the aspherical lenses at 0.3 THz. Cubic lenses, on the other hand, exhibit significant signal strength enhancement at 0.15 THz, but not at 0.3 THz. A damping of Fabry-P & eacute;rot oscillations at higher frequencies is also observed, contributing to improved spatial resolution. These results demonstrate the potential of the terajet effect to optimize THz detection systems for diverse applications, including medical imaging, security screening, and nondestructive testing. The findings provide practical guidelines for designing advanced THz systems and emphasize the importance of tailoring lens configurations to specific operational requirements., This research was partially funded by the Spanish Agencia Estatal de Investigación under grant nos. PID2021-126483OB-I00, PID2022- 136869NB-C33 and PDC2023-145856-I00, the Consejería de Educación, Junta de Castilla y León, under grant nos. SA106P23 and SA016G24, and the Conselleria de Innovación, Universidades, Ciencia y Sociedad Digital of the Generalitat Valenciana, under grant no. MFA/2022/056. This project has received funding from the European Union s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie Grant Agreement No 101034371. [Correction added on 04 April 2025 after online publication: The following funding statement has been added: This project has received funding from the European Union s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie Grant Agreement No 101034371.]
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Compact Metallic Cavity-Backed Slot Antenna Subarray for Space-Based ADS-B Reception

  • Vera-Sánchez, Javier|||0009-0004-0766-3285
  • Ferrando-Rocher, Miguel|||0000-0003-4098-7180
  • Casasús-Goyeneche, Gorka
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
[EN] A compact 2 × 2 cavity-backed slot array for 1090-MHz automatic dependent surveillance¿broadcast (ADS¿B) reception within the Horizon Europe SATERA project is presented. The radiating aperture consists of a shallow metallic cavity closed by a precision-machined slot and excited through a thin Rogers 4003C layer used exclusively for the feed network. The element geometry is tailored to obtain a stable resonance within the allocated ADS¿B band and to maintain a repeatable broadside response when arranged in modular subarrays. The fabricated prototype exhibits a measured 2% impedance bandwidth (25 at 1090 MHz), axial ratio below 3 dB in broadside, peak directivity of approximately 10 dBi, and radiation efficiency better than -1 dB. A corporate divider provides equal-amplitude, quadrature-phase excitation across the four elements, enabling straightforward scaling toward larger receiving apertures required by space-based ADS¿B and multilateration payloads., This work was supported in part by the Project SATERA through the Horizon Europe/SESAR-3 Program under Agreement 101164313, in part by Spain's Ministerio de Ciencia e Innovacion under Project PID2022-136869NB-C33 and Project PID2022-141055NB-C21, and also with the CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Designing X-Band Lenses with the Adjoint Method and 3D Printing Techniques

  • Vico Bondía, Felipe|||0000-0003-1292-3657
  • Cabedo Fabres, Marta|||0000-0002-3370-1802
  • Bachiller Martin, Maria Carmen|||0000-0002-5518-5060
  • Voronov, Aleksandr Andreyevich|||0009-0008-4508-4400
  • Jiménez, Luís
[EN] In this study, we employ the adjoint method to design a Gradient Index (GRIN) lens at 10 GHz, optimizing the dielectric constant at each point to meet specific goal functions. Our optimization framework incorporates a 2D FFT-integral equation solver, delivering solutions within seconds. The entire optimization process is completed in just minutes, presenting a highly efficient approach to lens design. The optimized lens is fabricated using advanced 3D printing techniques, ensuring high precision and cost-effective manufacturing. The resulting design features a unique ring-shaped lens with a central piece of lower contrast, weighing a total of 207 grams and achieving an aperture efficiency of 55.9% as experimentally measured, confirming the effectiveness of the proposed method. The 3D printing process facilitates the rapid prototyping of such GRIN lenses, demonstrating its potential for applications requiring lightweight and compact designs. This approach opens avenues for further optimization and practical applications in communication systems and beyond., This work was supported in part by MCIN through the European Union NextGenerationEU (PRTR-C17.I1); in part by the Generalitat Valenciana under Project MAOCOM-6G (Code: MFA/2022/056); in part by the Agencia Valenciana de la Innovación under Project INNEST/2022/124; and in part by the Ministerio de Ciencia e Innovación under Project PID2022-136869NB-C33.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Cost-effective Single-Layer Metallic Lens Antenna with High Aperture Efficiency

  • Santillán-Haro, Daniel Antonio
  • Antonino Daviu, Eva|||0000-0002-0163-4561
  • Vico Bondía, Felipe|||0000-0003-1292-3657
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
[EN] This paper presents a novel millimeter-wave high-gain single-layer lens antenna design that features a metallic ring as its foundational element. Leveraging characteristic modes analysis, the shape of the structure is systematically optimized. The resulting planar antenna exhibits outstanding radiation performance alongside its simplicity, achieving a gain exceeding 20 dBi at 20.50 GHz, and an aperture efficiency of 63 %). These exceptional performance characteristics make it ideal for applications in 5G and 6G systems. Additionally, the use of a cost-effective manufacturing process increases its potential for widespread adoption in future communication technologies., This work was supported in part by the Spanish Ministry of Science and Innovation (Ministerio de Ciencia e Innovacion) under Project PID2022-136869NB-C33, in part by the Generalitat Valenciana under Project MFA/2022/056, and in part by the Project Comparative Analysis of the Radiation Characteristics of Metallic Lenses and Reconfigurable Intelligent Surfaces (RIS) for Wireless Networks in the Microwave and Millimeter Wave Bands funded by the National University of Chimborazo.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multimodal planar monopole filtenna for 5G applications

  • Ribó, Miquel
  • Pradell, Lluís
  • Blanch, Sebastián
  • Cabedo Fabres, Marta|||0000-0002-3370-1802
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
[EN] This paper presents a novel planar filtering antenna (filtenna) with simple layout based on tightly -coupled different -length monopoles. Its design methodology is based on an even-mode/odd-mode decomposition of the monopole currents, and the combination of both modes in a multimodal circuit model that facilitates the design and tuning of the antenna and the accompanying feeding network, since most of the process is performed using fast circuit simulations. The circuit model casts light into the interaction between conducting and radiating modes in the bulk of the antenna, and on how this interaction can be used to propose feedback loops that increase and define the radiation band. Using these modal tools, a filtenna was designed and fabricated to fully cover the new 5G frequency bands (n77, n78 and n79) from 3 to 5 GHz that are currently being adopted by many countries for high -capacity data transmission. It features a 62.9% FWB, dipole -like radiation patterns, good out -of -band rejection up to 10 GHz, and a very good trade-off between design/structural-simplicity and bandwidth., This work was supported in part by Ministerio de Ciencia, Innovacion y Universidades, Spain under Grant PID2022-136869NB-C31 financed by MCIN/AEI/10.13039/501100011033/FEDER, UE and PID2022-136869NB-C33 financed by MCIN/AEI/10.13039/501100 011033/FEDER, UE.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fast Adaptive High-Order Integral Equation Methods for Electromagnetic Scattering From Smooth Perfect Electric Conductors

  • Vico Bondía, Felipe|||0000-0003-1292-3657
  • Greengard, Leslie
  • O'Neil, Michael
  • Rachh, Manas
[EN] Many integral equation-based methods are available for problems of time-harmonic electromagnetic scattering from perfect electric conductors. Among the many challenges that arise in such calculations are the avoidance of spurious resonances, robustness of the method to scatterers of non-trivial topology or multiscale features, stability under mesh refinement, ease of implementation with high-order basis functions, and behavior in the static limit. Since three-dimensional scattering is a challenging, large-scale problem, many of these issues have been historically difficult to investigate. It is only with the advent of fast algorithms for matrix-vector multiplies coupled with modern iterative methods that a careful study of these issues can be carried out effectively. Our focus here is on comparing the behavior of several integral equation formulations with regard to the issues noted above, namely: the well-known, standard electric, magnetic, and combined field integral equations with standard RWG basis functions, and the more modern non-resonant charge-current and decoupled potential integral equation. Numerical results are provided to demonstrate the behavior of each of these schemes. Furthermore, we provide some analytical properties and comparisons with the electric charge-current integral equation and the augmented regularized combined source integral equation., This work was supported in part by the Advanced Materials Program,in part by the Ministerio de Ciencia Innovacion y Universidades Ministerio de Ciencia e Innovacion with funding from the European Union NextGenerationEU under Grant PRTR-C17.I1,in part by the Generalitat Valenciana through Project MAOCOM-6G under Grant MFA/2022/056,in part by the Office of Naval Research under Award N00014-18-1-2307, Award N00014-21-1-2383, and Award N00014-17-1-2451, and in part by the Ministerio de Ciencia e Innovacion under Project PID2022-136869NB-C33.