Pasar al contenido principal

TECNOLOGIAS DE ANTENAS DE COSTE EFICIENTE PARA COMUNICACIONES DE BANDA ANCHA SOSTENIBLES EN LA BANDA DE MILIMETRICAS

PID2022-141055NB-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Beamforming Phase Array Based on Aluminum Patch Antennas and Nolen 4×4 Matrix for Application in 900 MHz for Natural Events Monitoring

  • Ramos, Cristina
  • Carrera-Suárez, Fernando
  • Navarro-Méndez, Diana
  • Baquero Escudero, Mariano|||0000-0001-8772-5431
[EN] This paper presents a beamforming phase array using lumped elements in the overall 4×4 Nolen matrix; the main application is for the ISM 900 MHz band for natural events monitoring. The matrix proposed develops a solution with space reduction and good performance. The methodology for design branch line couplers and phase shifters is based on equivalence between transmission lines and lumped elements. The design for antenna array is based in patch antennas fabricated in aluminum with air dielectric for to guarantee the high mechanical robustness and low electromagnetic losses. A first prototype at 920 MHz was manufactured in one layer with lumped elements SMD. The measured results show good agreement with the simulations. The obtained bandwidth was approximately 7.4%. Regarding the radiation patterns, the integrated array demonstrates effective beam-scanning performance, although the side-lobe levels remain relatively low. The overall matrix size is 11.4×4.1 cm and the antenna array present a size of 86×18.6 cm. Hence, this beamforming phase array has the correct behavior for a 4×4 Nolen matrix and the footprint is seven times smaller than if it were developed using microstrip technology., This work was supported by project PID2022-141055NBC21 funded by MCIU/AEI/10.13039/ 501100011033 and by ERDF A way of making Europe.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Beam-Steering Array Antenna Fed by an Azimuthally Inhomogeneous Radial Waveguide

  • Herranz Herruzo, José Ignacio|||0000-0002-0507-1487
  • Valero-Nogueira, Alejandro|||0000-0001-9296-4162
  • Ferrando-Rocher, Miguel|||0000-0003-4098-7180
  • Vico Bondía, Felipe|||0000-0003-1292-3657
[EN] Achieving high-efficiency beam-steerable low-profile mm-wave array antennas has become particularly relevant for the advancement of modern communication systems. A completely novel passive approach to steer the directive beam of large low-profile circular arrays is proposed here. This method is enabled when an unequally spaced array is fed by an inhomogeneous radial waveguide. When array spacing and waveguide permittivity satisfy an optimal azimuthal distribution, a simple in-plane rotation of one antenna part provides the desired elevation scanning feature. The analytical design expressions are derived, and the theoretical performance is assessed, confirming the suitability of the proposed beam-steering method. A first practical implementation is conceived as a demonstrator, consisting of a slot array fed by an all-metal radial waveguide filled with an inhomogeneous bed of nails (BoNs). Experimental validation of the constructed prototype confirms the beam-steering property with a peak gain above 30 dBi and a maximum scan angle of 20 degrees at 30 GHz. The proposed approach allows further improvement of the field of view by adopting a more versatile waveguide permittivity synthesis., This work was supported by MICIU/AEI/10.13039/501100011033 under Project PID2022-141055NB-C21 and Project PID2022-136869NB-C33, by ERDF a Way of Making Europe, and by CRUE-Universitat Politecnica de Valencia for open access.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fully-Metallic Frequency-Scanning antenna At 24 GHz Using Half-Mode Groove Gap Waveguide

  • Ferrando-Rocher, Miguel|||0000-0003-4098-7180
  • Herranz Herruzo, José Ignacio|||0000-0002-0507-1487
  • Gómez-Tornero, José Luis
[EN] This letter introduces an antenna with frequency-dependent scanning capabilities specifically tailored for automotive radar applications with a center frequency of 24 GHz. The prototype, constructed entirely from metal, ensures high efficiency and maintains a remarkably low profile despite its metallic composition. This compact antenna exhibits a high scanning sensitivity with overall dimensions of 9 lambda(0) x 5 lambda(0 )x lambda(0) (11.25 cm x 6.25 cm x 1.25 cm). Over a 6% bandwidth, it achieves a field of view of 56(degrees) ( -30(degrees)to + 26(degrees) ). The combination of its low profile, full metal structure, and experimental results indicating a directivity above 21 dBi and surpassing 80% radiation efficiency makes this antenna highly desirable for automotive radar applications. In addition, this antenna is well suited for industrial sensors, traffic monitoring systems, and security and surveillance applications., This work was supported in part by the MCIN/AEI/10.13039/501100011033 under Grant PID2022-141055NB-C21 and in part by ERDF A way of making Europe.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Five-Beam Fully-Metallic Nolen Matrix-based Array Antenna for 5G Applications at 26 GHz

  • Fuentes-Pascual, Miguel Ángel|||0000-0001-7072-1127
  • Ferrando-Rocher, Miguel|||0000-0003-4098-7180
  • Herranz Herruzo, José Ignacio|||0000-0002-0507-1487
  • Baquero Escudero, Mariano|||0000-0001-8772-5431
[EN] The communication explores the development of a Nolen Matrix operating at 26 GHz (25.25 GHz¿26.75 GHz) using E-plane rectangular waveguides. The Nolen network comprises 5 coaxial input ports and 7 outputs, each linked to a linear array of 9 elements. This design yields a compact fully-metallic 7×9 slot array with low profile, high efficiency, and beam-switching capabilities. Experimental results closely align with theoretical and simulated data, demonstrating gain values surpassing 21 dBi and measured total mean efficiencies of 80% across all scenarios. Moreover, the antenna¿s steering ranges from ¿40¿ to +35¿. Given its performance and frequency versatility, potential applications for this antenna include wireless communications, radar systems, satellite communications, and remote sensing., This work is part of the grants PID2019-107688RB-C22 and PID2022-141055NB-C21, funded by MCIN/ AEI/10.13039/501100011033 and by ERDF A way of making Europe.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Compact Metallic Cavity-Backed Slot Antenna Subarray for Space-Based ADS-B Reception

  • Vera-Sánchez, Javier|||0009-0004-0766-3285
  • Ferrando-Rocher, Miguel|||0000-0003-4098-7180
  • Casasús-Goyeneche, Gorka
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
[EN] A compact 2 × 2 cavity-backed slot array for 1090-MHz automatic dependent surveillance¿broadcast (ADS¿B) reception within the Horizon Europe SATERA project is presented. The radiating aperture consists of a shallow metallic cavity closed by a precision-machined slot and excited through a thin Rogers 4003C layer used exclusively for the feed network. The element geometry is tailored to obtain a stable resonance within the allocated ADS¿B band and to maintain a repeatable broadside response when arranged in modular subarrays. The fabricated prototype exhibits a measured 2% impedance bandwidth (25 at 1090 MHz), axial ratio below 3 dB in broadside, peak directivity of approximately 10 dBi, and radiation efficiency better than -1 dB. A corporate divider provides equal-amplitude, quadrature-phase excitation across the four elements, enabling straightforward scaling toward larger receiving apertures required by space-based ADS¿B and multilateration payloads., This work was supported in part by the Project SATERA through the Horizon Europe/SESAR-3 Program under Agreement 101164313, in part by Spain's Ministerio de Ciencia e Innovacion under Project PID2022-136869NB-C33 and Project PID2022-141055NB-C21, and also with the CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mushroom Groove Waveguide for Cost-Effective Low-Loss Power Distribution Networks

  • Martín-Núñez, Álvaro|||0009-0001-1510-7930
  • Ferrando-Rocher, Miguel|||0000-0003-4098-7180
  • Herranz Herruzo, José Ignacio|||0000-0002-0507-1487
  • Valero-Nogueira, Alejandro|||0000-0001-9296-4162
[EN] This work introduces and evaluates the novel mushroom groove waveguide (MGW) as a cost-effective, low-loss alternative to conventional gap waveguides (GWs). The MGW and its half-mode variant (HM-MGW) are benchmarked against established gap waveguide technologies, including the conventional GGW and its half-mode variant (HM-GGW), both using traditional metallic pins to emulate a perfect magnetic conductor (PMC). This work assesses the performance of an eventual power distribution network (PDN) across four different realizations, focusing on insertion loss, ease of fabrication, and cost-effectiveness. Experimental measurements corroborate simulation results, offering critical insights for the practical implementation of MGW-based PDNs for millimeter-waveband applications., This work was supported in part by the Spanish Ministry of Science, Innovation and Universities/State Research Agency (MICIU/AEI) through Project PID2022-141055NB-C21 under Grant PREP2022-000128; and in part by the European Regional Development Fund (ERDF) through the program A way of making Europe, and the European Social Fund Plus (ESF+).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Low-Sidelobe Flat Panel Array Fed by a 3D-Printed Half-Mode Gap Waveguide Amplitude-Tapering Network

  • Castellá-Montoro, Adrián
  • Ferrando-Rocher, Miguel|||0000-0003-4098-7180
  • Herranz Herruzo, José Ignacio|||0000-0002-0507-1487
  • Valero-Nogueira, Alejandro|||0000-0001-9296-4162
[EN] This article presents the design and evaluation of an 8 x 8 Ka-band low-sidelobe slot array antenna using gap waveguide technology. The slot array is fed by a single-layer amplitude-tapering network implemented in half-mode groove gap waveguide, resulting in a low-profile, low-sidelobe antenna. The simplicity of the proposed feeding network, composed of a novel design of asymmetrical dividers, enables precise fabrication using cost-effective additive techniques. Experimental results demonstrate a significant reduction in sidelobe levels compared to traditional uniform arrays, with a radiation efficiency exceeding 84%. This design, featuring simple and robust asymmetrical splitters, is well-suited for applications requiring high gain and low interference., This work was supported in part by MCIN/AEI/10.13039/501100011033, and in part by ERDF A Way of Making Europe under Project PID2019-107688RB-C22 and Project PID2022-141055NB-C21.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Taylor-Weighting Ridge Gap Waveguide Feed Network for Low-Profile Fully-Metallic Array Antennas

  • Pla-Herliczka, Damián
  • Herranz Herruzo, José Ignacio|||0000-0002-0507-1487
  • Ferrando-Rocher, Miguel|||0000-0003-4098-7180
  • Valero-Nogueira, Alejandro|||0000-0001-9296-4162
[EN] This letter showcases advancements in metallic array antennas tailored for millimeter-wave (mm-Wave) applications, supported by novel highly compact unbalanced dividers conceived in ridge gap waveguide technology. This innovative approach streamlines the feeding network by enabling high-weight-ratio dividers without adding design complexity. The study presents an 8 x 8 Ka-band antenna array employing Taylor amplitude tapering and featuring a compact corporate-fed design that effectively mitigates coupling effects between the feeding network and radiating elements. Experimental results highlight promising characteristics, boasting a matching better than -10 dB across the entire band of interest [(29 to 31) GHz] and secondary lobes below -20 dB while achieving a radiation efficiency exceeding 82%., This work was supported in part by MCIN/AEI/ 10.13039/501100011033 under Grant PID2022-141055NB-C21 and in part by ERDF A way of making Europe, and the funding for open access was supported by the CRUE-Universitat Politécnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multimodal direct-ray transmission for enhanced point-to-point wireless-channel capacity

  • Vico Bondía, Felipe|||0000-0003-1292-3657
  • Herranz Herruzo, José Ignacio|||0000-0002-0507-1487
  • Ferrando-Rocher, Miguel|||0000-0003-4098-7180
  • Antonino Daviu, Eva|||0000-0002-0163-4561
[EN] through conventional uniform-aperture far-field ports: with finite apertures and no scatterers, the dominant contribution is the Friis mode, whose received power scales as 1/r2. We introduce Multimodal Direct-Ray Transmission (MDRT), a mode-synthesis and link-budget framework derived from an asymptotic expansion of the free-space Green's function that retains radiative near-field terms. The expansion identifies deterministic coaxial current distributions whose field amplitudes scale as 1/rm+1 (power proportional to 1/r2(m+1)), with m = 0 recovering the classical Friis term and m = 1 producing first-order secondary channels with power proportional to 1/r4. MDRT does not create degrees of freedom beyond the full dyadic Greenfunction channel; rather, it provides closed-form current weights, scaling laws, and generalized Friis-like formulas for accessing weak but existing higher-order singular channels. Because the relevant weights reduce to uniform, linear-gradient, and monopulse profiles, the leading MDRT channels can be realized as a small number of passive or hybrid modal antenna ports, reducing the rf-chain and calibration burden relative to fully digital element-level multiple input multiple output and singular value decomposition (SVD) implementations. We extend the analysis to the dyadic Green's function and express the first higher-order link budget in terms of a dimensionless first-order tensor directivity, interpretable as the squared angular slope of the normalized far-field vector at a boresight null. Numerical operator SVD confirms that the predicted current distributions approximate the dominant higher-order singular modes in the Fresnel or transition region. Finite-signal-to-noise ratio (SNR) capacity tables quantify when these modes are above the water-filling threshold for realistic frequencies, apertures, ranges, and receiver SNRs. Finally, a two-mode prototype demonstrates modal separation and the measured 1/r2 versus 1/r4 decay. The method requires accurate boresight alignment and is most relevant near the far-field boundary of large electrical apertures.