Pasar al contenido principal

SENSORES FOTONICOS PARA CIUDADES INTELIGENTES Y SOSTENIBLES II

PID2022-137269OB-C22

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE CANTABRIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Torsion sensor using a high-birefringence nine-hole optical fiber

  • Rodríguez Rodríguez, Armando
  • Vento Álvarez, José Raúl
  • Galarza Galarza, Marko
  • Vanegas Tenezaca, Evelyn Dayanara
  • Schuster, Kay
  • Bravo Acha, Mikel
  • López-Amo Sáinz, Manuel
This article presents a novel high-birefringence fiber-based torsion sensor based on a microstructured optical fiber with nine holes and seven cores microstructured holes and cores optical fiber (MHCF) embedded into a Sagnac interferometer (SI). A segment of this fiber is inserted into a symmetric SMF-MMF-MHCF-MMF-SMF arrangement, which provides efficient coupling to the multiple cores of the birefringent fiber and, consequently, multimode interference (MMI). Fast Fourier transform (FFT) spectral data analysis is employed to enhance measurement stability and reduce dependence on optical source variations. The sensor demonstrates a linear response to torsion angles between −50◦ and +50◦ , with a 16-mrad/◦ sensitivity. The high sensitivity and good linearity of the sensor are enhanced through the application of machine learning (ML) techniques., This work was supported in part by CIN/AEI/10.13039/501100011033 and Fondo Europeo de Desarrollo Regional (FEDER) \u201CA way to make Europe,\u201D under Project PID2022-137269OB; and in part by MCIN/AEI/10.13039/501100011033 and European Union (EU) \u201CNext generation EU\u201D/Plan de Recuperaci\u00F3n, Transformaci\u00F3n y Resiliencia (PRTR) under Project TED2021-130378B. Open access funding provided by Universidad P\u00FAblica de Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

L-band dual-wavelength fiber ring laser with automated polarization stabilization and switching for remote sensing applications

  • Tainta Ausejo, Santiago
  • Salinas Anguiano, Álvaro
  • Janices Chamizo, Iñaki
  • San Miguel Zarraluqui, Uxue
  • Sánchez González, Arturo
  • Erro Betrán, María José
  • Pérez Herrera, Rosa Ana
This work reports the experimental demonstration of a dual-wavelength L-band fiber ring laser for remote sensing applications. The system incorporates a polarization-sensitive semiconductor optical amplifier as the gain medium and two fiber Bragg gratings placed 25 km away from the laser cavity using standard single-mode fiber that serve both as wavelength-selective elements and sensing heads. Wavelength switching between single- and dual-channel lasing configurations is enabled by a simplified two-paddle motorized polarization controller. The system achieves optical signal-to-noise ratios exceeding 55 dB and power differences between lasing lines as low as 0.01 dB. To ensure long-term stability, an automatic control algorithm dynamically adjusts the polarization state in real time, compensating for environmentally induced polarization drift. The proposed setup provides a compact and robust solution for polarization-based wavelength switching in fiber lasers, with applications in the field of remote optical sensing., This work was supported in part by projects PID2022-137269OB, funded by MCIN/AEI/10.13039/501100011033 and FEDER ¿A way to make Europe¿ and PID2019-104426GB-100 funded by MCIN/AEI, and the Public University of Navarre collaboration grants.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Switchable L-band fiber ring laser driven by a motorized polarization fiber controller

  • Janices Chamizo, Iñaki
  • Salinas Anguiano, Álvaro
  • Erro Betrán, María José
  • Tainta Ausejo, Santiago
  • Pérez Herrera, Rosa Ana
In this work, a switchable multiwavelength L-band fiber ring laser based on a polarization-dependent booster optical amplifier (BOA) and a motorized polarization controller is experimentally demonstrated. Lasing wavelengths selection is achieved by automatically adjusting the polarization state, enabling single, dual, or triple line emission., This research was supported by the Public University of Navarre Collaboration grants. This work was supported in part by projects PID2022-137269OB, funded by CIN/AEI/10.13039/501100011033 and FEDER 'A way to make Europe', and TED2021-130378B funded by MCIN/AEI/10.13039/501100011033 and European Union 'Next generation EU'/PRTR, and PID2019-104426GB-100 funded by MCIN/AEI.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Low-cost system for vital signs monitoring based on long-period fiber grating

  • Molinos Rodríguez, Ariana
  • Martínez Ortiz, Francisco
  • Erro Betrán, María José
  • Tainta Ausejo, Santiago
  • Pérez Herrera, Rosa Ana
Accurate and continuous respiratory and heart rate monitoring is essential during medical procedures to ensure patient safety. This work explores the feasibility of using LPGs for monitoring in clinical environments where immunity to electromagnetic interference is crucial. Preliminary analysis and results suggest the validity of the proposal. Future research will focus on experimental validation and signal processing techniques to enhance performance., This research was supported by the Public University of Navarre Collaboration grants. This work was supported in part by projects PID2022-137269OB, funded by CIN/AEI/10.13039/501100011033 and FEDER ¿A way to make Europe¿, and TED2021-130378B funded by MCIN/AEI/10.13039/501100011033 and European Union "Next generation EU"/PRTR.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Method to use transport microsimulation models to create synthetic distributed acoustic sensing datasets

  • Robles Urquijo, Ignacio
  • Benavente, Juan
  • Blanco García, Javier
  • Diego González, Pelayo
  • Loayssa Lara, Alayn
  • Sagüés García, Mikel
  • Rodríguez Cobo, Luis
  • Cobo, Adolfo
This research introduces a new method for creating synthetic Distributed Acoustic Sensing (DAS) datasets from transport microsimulation models. The process involves modeling detailed vehicle interactions, trajectories, and characteristics from the PTV VISSIM transport microsimulation tool. It then applies the Flamant-Boussinesq approximation to simulate the resulting ground deformation detected by virtual fiber-optic cables. These synthetic DAS signals serve as large-scale, scenario-controlled, labeled datasets on training machine learning models for various transport applications. We demonstrate this by training several U-Net convolutional neural networks to enhance spatial resolution (reducing it to half the original gauge length), filtering traffic signals by vehicle direction, and simulating the effects of alternative cable layouts. The methodology is tested using simulations of real road scenarios, featuring a fiber-optic cable buried along the westbound shoulder with sections deviating from the roadside. The U-Net models, trained solely on synthetic data, showed promising performance (e.g., validation MSE down to 0.0015 for directional filtering) and improved the detectability of faint signals, like bicycles among heavy vehicles, when applied to real DAS measurements from the test site. This framework uniquely integrates detailed traffic modeling with DAS physics, providing a novel tool to develop and evaluate DAS signal processing techniques, optimize cable layout deployments, and advance DAS applications in complex transportation monitoring scenarios. Creating such a procedure offers significant potential for advancing the application of DAS in transportation monitoring and smart city initiatives., This research was funded by the Spanish Goverment 'Subprograma Ayudas Predoctorales 2020 Investigadores' program under Grant PRE2020-096336, assigned to the National Plan project PID2019-107270RB-C21, 'Photonic Devices and Systems Sensors for Intelligent Structures and Non Destructive Evaluation I'; the National 'Knowledge Generation Projects' project 'Photonic Sensors for Smart and Sustainable Cities (Performance)' under grant ID6448137269-137269-4-22; the project 'Integrated System for Traffic and Road Condition Monitoring Using Fiber-Optic Sensors (Ingestion)', under grant PDC2021-121172-C22 funded by MICIU/AEI/10.13039/501100011033 and by the European Union Next GenerationEU/PRTR). This work was supported in part by grant PID2022-137269OB-C21 by MICIU/AEI/10.13039/501100011033 and by ERDF 'A way of making Europe'; and grant PID2022-137269OB-C22 by MICIU/AEI/10.13039/501100011033 and by the European Union.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Polarization-switched fiber optic ring laser for L-band multiwavelength remote sensing applications

  • Pérez Herrera, Rosa Ana
  • Janices Chamizo, Iñaki
  • San Miguel Zarraluqui, Uxue
  • Salinas Anguiano, Álvaro
  • Sánchez González, Arturo
  • Erro Betrán, María José
  • Tainta Ausejo, Santiago
This work presents the experimental demonstration of a three-channel remote sensor that operates in the L-band. It is based on a fiber ring laser cavity, formed by a semiconductor optical amplifier and three fiber Bragg gratings used both for the selection of the operating wavelengths and the sensing. A polarization-controller allows the activation of one, two or the three emission wavelengths simultaneously. The sensing elements can be situated in a remote localization, without compromising the temperature sensitivity of the experimental setup. To validate this functionality, a 25 km standard single-mode fiber optic reel is incorporated between the FBG-based sensors and the cavity, demonstrating the system's ability to perform long-range sensing while preserving signal integrity and operational reliability., This work was supported in part by projects PID2022-137269OB, funded by MCIN/AEI/10.13039/501100011033 and FEDER 'A way to make Europe', and TED2021-130378B funded by MCIN/AEI/10.13039/501100011033 and European Union 'Next generation EU'/PRTR, and PID2019-104426GB-100 funded by MCIN/AEI. This research was supported by the Public University of Navarre Collaboration grants.