Pasar al contenido principal

NUEVOS SISTEMAS ESPACIOTEMPORALES COMPLEJOS PARA EL CONTROL DEL SONIDO

PID2022-138321NB-C22

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Parametric Study and Experimental Validation of Acoustic Leaky Wave Antenna in Spatial Localization

  • Fernández-Garrido, Alejandro
  • Campo-Valera, María
  • Abdo-Sánchez, Elena
  • García-Sánchez, Antonio-Javier
  • Asorey-Cacheda, Rafael
  • Picó Vila, Rubén|||0000-0003-3537-9658
[EN] Acoustic signals, which have been utilized for decades in the spatial localization of objects, have found applications in fields as diverse as sonar for underwater navigation, communication, and object detection. Traditional methods often rely on arrays of transducers, which necessitate the use of expensive hardware and processing algorithms. An emerging alternative is the Acoustic LeakyWave Antenna (ALWA), which is inspired by electromagnetic leaky wave antennas. ALWA technology employs a single transducer to emit directional beams that scan angular space by frequency manipulation. Conventional arrays offer cost-effectiveness and simplicity of design, but ALWAs have the advantage of operating on the principle of energy leakage, which is achieved by various mechanisms, such as uniform apertures or slits periodic along the waveguide. This technology, applicable to underwater and airborne communications, offers compact and energy-efficient solutions, which facilitate the development of the "Underwater Internet of Things" and autonomous communication systems for underwater vehicles. This work presents a parametric study of this type of antennas with axisymmetric geometry by means of a numerical solution based on the Finite Element Method. Together with analytical studies, the physical phenomenology underlying this technology will be described, including directivity, transmission and reflection parameters, beam scanning and dispersion curve. Finally, the design is validated through experiments., This work was supported in part by the ThinkInAzul and AgroAlNext Programs funded by Ministerio de Ciencia, Innovación y Universidades (MICIU) with funding from European Union (EU) NextGenerationEU/Plan de Recuperación, Transformación y Resiliencia (PRTR)-C17.I1; in part by the Fundación Séneca with funding from Comunidad Autónoma Región de Murcia (CARM); in part by the MICIU/Agencia Estatal de Investigación (AEI)/10.13039/501100011033 under Grant PID2023-148214OB-C21, Grant TED2021-129336B-I00, Grant PID2022-141193OB-I00, and Grant PID2022-138321NB-C22; in part by the European Union NextGenerationEU/PRTR and Fondo Europeo de Desarrollo Regional (FEDER)/EU; and in part by the Fundación Séneca under Grant 22236/PDC/23.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multiobjective design optimization of a tunable acoustic switch using multiresonant asymmetric scatterers

  • Ramírez-Solana, David|||0000-0002-1964-5023
  • Redondo, Javier|||0000-0002-5507-7799
  • Fanti, Maria Pia
  • Gulzari, Muhammad
[EN] This study introduces a multiobjective (MO) optimization framework for designing a tunable acoustic switch based on multiresonant asymmetric scatterers arranged in a periodic sonic crystal (SC) lattice. The multiresonant SC exploits the interplay between the Bragg bandgap (Bragg-BG) and the local resonance BG (LR-BG), induced by the Helmholtz resonators (HRs), to enable switchable acoustic transmission in the low to mid-frequency range (500¿2500 Hz). By rotating the scatterers by 90¿, the system dynamically controls the frequency ranges for acoustic insulation and transmission. The proposed optimization framework employs the -variable MO genetic algorithm ( v-MOGA), targeting two key performance metrics: the contrast ratio (CR) and the absolute difference (Diff) in transmission between orthogonal orientations of the scatterers. Geometric parameters of the HR-inspired SC neck and the internal separation wall angle are optimized under 3D-printability constraints. Numerical simulations, validated by experimental measurements on a 3D-printed prototype, demonstrate enhanced tunable acoustic wave transmission with complementary BGs in the perpendicular orientations and improve the switching performance compared to the initial design. This approach provides a simple, robust, and cost-effective solution for tunable acoustic filtering, overcoming limitations of existing passive and complex active metamaterial switches. Our findings offer valuable insights for designing adaptive acoustic devices, advancing applications in noise control and acoustic wave manipulation., Open Access funding provided by the IReL Consortium This work received support from Construct Innovate, Ireland s National Research Centre for Construction Technology and Innovation (Enterprise Ireland TC-2022-0033, Seed Fund Call CISFC1-23_002). Additional funding was provided through grant PID2022-138321NB-C22, financed by MICIU/AEI/10.13039/501100011033 and co-funded by ERDF/EU.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Acoustic performance of toroidal caps: A path to constant beam width transducers

  • LORENTE-FEMENIA, BOSCO
  • Castells, Francisco|||0000-0001-5044-3545
  • Picó Vila, Rubén|||0000-0003-3537-9658
  • Signes, Vicente
[EN] Most directional acoustic transducers and arrays have beam widths that vary with frequency. To overcome these limitations, constant beam width transducers (CBTs) were conceived to maintain a stable radiation pattern across frequencies and thus provide consistent directivity. This work presents a continuous toroidal cap source that achieves a constant beam width pattern in both the horizontal and vertical planes, providing controlled and frequency-independent sound radiation in multiple directions. The performance of the radiation pattern is evaluated according to a parametric study involving geometrical properties of the toroidal cap and shading techniques. Results show improved performance for a two-dimensional (2D) cosine shading with respect to uniform shading. This study offers new insights that can be directly applied to the design of 2D CBTs and presents a model for stable, multidirectional sound radiation suitable for practical transducer matrices., This work has been co-financed by the Agencia Valenciana de la Innovacion, in the announcement for Promocion del talento: Agentes de innovacion, incorporacion de investigadores y tecnologos para proyectos de innovacion en empresas y doctorandos empresariales at its line 3, Doctorandos y doctorandas empresariales (Innodocto). This research was also supported by Grant No. PID2022-138321NB-C22, funded by MICIU/AEI/10.13039/501100011033 and ERDF/EU.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Acoustic switch based on rotatable sonic crystal with multiresonant scatterers

  • Ramírez-Solana, David|||0000-0002-1964-5023
  • Picó Vila, Rubén|||0000-0003-3537-9658
  • Redondo, Javier|||0000-0002-5507-7799
  • Sangiorgio, Valentino
[EN] This research introduces an acoustic switch based on a Sonic Crystal (SC) containing multiresonant scatterers. The SC operates in a square 2D lattice configuration with scatterers containing Helmholtz resonators (HRs) tuned to different frequencies. By rotating all scatterers by 90 degrees, the interaction between the Bragg bandgaps (Bragg BGs) and the HRs' BGs can be modified, allowing selective frequency filtering and control of wave propagation. Although SCs operating at low frequencies have been widely investigated, the implementation of reconfigurable acoustic switches in the low-to-mid frequency range (500-2500 Hz) remains scarce. This is one of the novelties highlighted in the present study. The simplicity and cost-effectiveness of the 3D-printed structure, coupled with its hollow design that minimizes absorption, enhances its practicality. Experimental validation conducted in an anechoic chamber shows a significant change in acoustic insulation performance, with a maximum contrast ratio of 20 dB. This design opens up new possibilities for noise reduction in urban and industrial environments, adaptive acoustic environments, acoustic sensors, and even acoustic energy harvesting., This research was funded by grant PID2022-138321NB-C22 funded by MICIU/AEI/10.13039/501100011033 and ERDF/EU. Also this work was supported by project "MUD-MADE: MUlti-objective optimization of Digitally MAnufactureD Earth building components supported by neural networks (PRIN PNRR 2022)". We acknowledge the EPSG (UPV) laboratories resources for all the facilities for the experimental validation of the prototypes. Special thanks go to the FabLab Bitonto Association and the Digital Fabrication Lab of the "G. d'Annunzio" University of Chieti-Pescara for their support in the development of the prototype.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Acoustic wave scattering by spatiotemporal interfaces

  • Galiana-Nieves, Jaime
  • Redondo, Javier|||0000-0002-5507-7799
  • Picó Vila, Rubén|||0000-0003-3537-9658
  • Sánchez Morcillo, Víctor José|||0000-0003-4766-1263
[EN] Space-time materials are obtained by modulating a physical medium with a traveling-wave perturbation of one or several of its constitutive parameters, such as the density or the bulk modulus in the case of acoustic materials. When this modulation has the form of a moving and abrupt (subwavelength) transition between two parameter values, we refer to a spatiotemporal interface, which may be considered as a building block for more complex space-time materials. This work considers the problem interaction and scattering of acoustic waves with a single spatiotemporal interface, and a sequence of two interfaces forming a slab. Several regimens defined by the relation between the sound propagation velocities and the interface velocity (i.e., subsonic, intersonic, and supersonic regimens) are discussed. Analytical expressions for the frequency conversions and scattering coefficients are obtained, and compared with numerical simulations based on an equivalent FTFD scheme., This work was supported by Grant No. PID2022-138321NBC22 funded by MICIU/AEI/10.13039/501100011033 and ERDF/EU.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Acoustic characterization of a cavitation tunnel for ship propeller noise studies

  • Bocanegra, J. A.
  • Borelli, D.
  • Gaggero, T.
  • Tani, G.
  • Picó Vila, Rubén|||0000-0003-3537-9658
[EN] The noise radiated by ship propellers can be studied by analyzing scaled models in a cavitation tunnel. However, transferring the measurements made in the enclosed space of the tunnel to the expected values in a full-scale propeller (in a free field) presents a challenge for noise measurements. An acoustic characterization of the DITEN cavitation tunnel, including a study of normal modes and acoustic response to harmonic sources, is presented to understand the primary acoustic behaviour of the enclosure and its propagation characteristics. A three-dimensional numerical model was developed to simulate the DITEN Genoa University cavitation tunnel and evaluate the influence of elements such as a dynamometer, fins, impeller, and source position on the acoustic response of the tunnel. The study showed the influence of the mentioned elements on the acoustic response of the tunnel, and the numerical predictions were validated by comparing them with the experimental campaign in the low-mid frequency range. The study provides valuable insights into the behaviour of sound waves in a cavitation tunnel and the influence of various factors, which can help design and optimize cavitation tunnels and related experiments. (c) 2024 Shanghai Jiaotong University. Published by Elsevier B.V. This is an open access article under the CC BY license ( http://creativecommons.org/licenses/by/4.0/ ), Ruben Pico acknowledges support from the Spanish Ministry of Economy and Innovation (MINECO) and EuropeanUnion FEDER through project PID2019-109175GB-C22 and PID2022-138321NB-C22.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Sound diffusion properties of triply periodic minimal surfaces using three-dimensional FDTD simulations

  • Ramirez-Solana, David
  • Sangiorgio, Valentino
  • Gulzari, Muhammad
  • Redondo, Javier|||0000-0002-5507-7799
[EN] Triply Periodic Minimal Surfaces (TPMS) have been noticed in various engineering disciplines such as biomechanics, heat transfer, and structural mechanics due to their continuous curvature, high surface-to-volume ratio, and compatibility with additive manufacturing. In acoustics, recent research has explored their absorption and bandgap properties; however, their potential as sound diffusive surfaces remains largely unexplored. Addressing this research gap, the present study investigates the frequency-dependent sound diffusion performance of six TPMS geometries using three-dimensional Finite-Difference Time-Domain (FDTD) simulations. The analysis follows the ISO 17497-2 standard and is performed using two complementary models: a high-fidelity "Big Model" and a fast Near-Field to Far-Field (NFFF) approximation. Results show that certain TPMS, such as Costa and Scherk's Tower, achieve enhanced diffusion at mid-to-high frequencies, while others like Batwing exhibit tunable low-frequency peaks. The absence or presence of a rigid backing is shown to significantly influence diffusive behavior. Despite the reduced computational complexity of the NFFF model, its predictions closely match the full model, enabling efficient parametric studies. Finally, potential application of TPMS are discussed, such as the integration of TPMS-based surfaces into acoustic partition panels for improving speech intelligibility in open-plan spaces., This research was supported by Construct Innovate, Ireland's National Research Centre for Construction Technology and Innovation (Enterprise Ireland TC-2022-0033, Seed Fund Call CISFC1-23_002) . Also funding by grant PID2022-138321NB-C22 funded by MICIU/AEI/10.13039/501100011033 and ERDF/EU is acknowledged. We also acknowledge the support by project "MUD-MADE: MUlti-objective optimization of Digitally MAnufactureD Earth building components supported by neural networks (PRIN PNRR 2022) ".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhanced Numerical Equivalent Acoustic Material (eNEAM): Analytical and Numerical Framework for Porous Media with Thermo-Viscous Effects for Time Domain Simulations

  • Iglesias, P. C.
  • Godinho, L.
  • Redondo, Javier|||0000-0002-5507-7799
[EN] Accurate prediction of sound propagation in porous and dissipative media remains challenging when classical models struggle to capture the microscopic material characteristics. This work introduces the Enhanced Numerical Equivalent Acoustic Material (eNEAM) framework, extending the original NEAM formulation by combining analytical and numerical approaches. The analytical formulation provides closed-form expressions for effective impedance, complex wavenumber, and absorption coefficient under normal incidence, with and without thermo-viscous effects, enabling a direct validation against impedance-tube data and efficient initialization of finite-difference time-domain (FDTD) simulations. A parameter optimization strategy, focused on the thermolabile coefficient (¿B), significantly improves low-frequency absorption predictions. Robustness studies reveal that even substantial variations in model parameters generally remain within an optimal ±10% range. Additionally, a comparison between models with and without thermo-viscous losses was performed and shows that differences are negligible at macroscopic scales, which can be useful to reduce computational costs. Following computational time reduction, the adaptive mesh refinement technique employed also reduces time costs by over 50% in 1-D FDTD simulations, even without GPU acceleration. Taken together, these developments demonstrate that eNEAM provides a versatile, accurate, and computationally efficient framework for modeling porous materials, bridging experimental characterization, analytical formulations, and numerical simulations while maintaining robustness against parameter variations., This work has been funded by the project PID2022-138321NB-C22 of the Spain s Ministry of Science and Innovation. This work was also supported by the Fundação para a Ciência e a Tecnologia (FCT) through national funds and by the Fundo Europeu de Desenvolvimento Regional (FEDER) through the Thematic Programme Innovation and Digital Transition (COMPETE 2030), under Portugal 2030, and by the European Union, within the framework of Project No. 14677 | COMPETE2030-FEDER-00917500. This research was additionally funded by FCT/MCTES under the R&D Unit Institute for Sustainability and Innovation in Structural Engineering (ISISE), under reference UID/4029/2025, and under the Associate Laboratory Advanced Production and Intelligent Systems ARISE under reference LA/P/0112/2020.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Assessment of the sound reduction index provided by noise barriers with low sound insulation

  • Galiana-Nieves, Jaime
  • Picó Vila, Rubén|||0000-0003-3537-9658
  • del Rey, Romina|||0000-0001-5907-0677
  • Alba, Jesus|||0000-0002-4188-854X
  • Redondo, Javier|||0000-0002-5507-7799
[EN] In the realm of environmental noise control, the emergence of metamaterial-based acoustic barriers, such as sonic crystal noise barriers (SCNBs), represents a significant innovation due to their unique ability to manipulate sound waves. Despite their growing popularity, accurately assessing their efficacy remains a challenge. In one of the current standard methods, as outlined in EN 1793-2:2012, overestimates the sound insulation in cases with low sound insulation. This becomes problematic for sonic crystal noise barriers, which show low sound insulation at certain frequencies. Consequently, this standard method overestimates the sound reduction index in such cases. In this paper, an alternative formulation for the determination of the sound reduction index is proposed to avoid the sound insulation overestimation when dealing with sonic crystal noise barriers. The proposed formulation is validated by both numerical simulations and experimental measurements., This work was supported by the Spanish Ministry of Science and Innovation (MICINN) and the European Union FEDER (project PID2022-138321NB-C22).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Study of Acoustic Prototypes Based on Plastic Cap Waste

  • del Rey, Romina|||0000-0001-5907-0677
  • Crespo, J.E|||0000-0003-1372-4289
  • Alba, Jesus|||0000-0002-4188-854X
  • Escales Tur, Joan
[EN] This paper presents the initial prototypes of solutions designed using plastic caps, seeking acoustic applications for both airborne sound insulation and the acoustic conditioning of rooms. Plastic caps are a waste product from the packaging sector and they constitute a major waste problem, given that, if they are not attached to the packaging, they get lost during the recycling cycle and end up in landfill. Finding an application for this waste that can provide acoustic improvements is a sustainable alternative. This paper shows the results of airborne sound insulation measurements obtained in a scaled transmission chamber and sound absorption measurements obtained in a scaled reverberation chamber for different combinations of single and double plastic caps and combinations with thin sheets of sustainable materials, such as jute weaving, textile waste, hemp felt and cork board. Tests have shown that obtaining sound reduction index values of up to 20 dB is possible with plastic cap configurations, or even up to 30 dB is possible at some frequencies with combinations of caps and certain eco-materials. With regard to the sound absorption coefficient tests, close to unity absorption values have been achieved with the appropriate configuration at frequencies that can also be selected. The results indicate that these panels can be eco-solutions for airborne sound insulation as lightweight elements, or they can be used for the conditioning of rooms, tailoring the sound absorption maximums to the desired frequencies., This research was funded by Ministerio de Ciencia e Innovación, grant number PID2022-138321NB-C22.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Floquet breathers in a modulated nonlinear lattice

  • Kimura, Masayuki
  • Archilla, Juan F. R.
  • Doi, Yusuke
  • Sánchez Morcillo, Víctor José|||0000-0003-4766-1263
[EN] In this work, we study a space-time-modulated electro-mechanical system, consisting of an array of coupled cantilevers with their on-site potential provided by electromagnets driven by AC currents. Model equations are derived, and the effect of the modulation on the dispersion bands is examined. The theory of breather existence and stability is extended to include space-time modulation. We perform numerical simulations in a time-modulated system, showing three types of breather response depending on the driving frequency: (i) the modulation frequency is an integer multiple of the breather frequency or, in other words, this phenomenon corresponds to period doubling, tripling, etc.; (ii) the opposite, that is, the breather frequency is an integer multiple of the modulation frequency, corresponding to period-halving, etc.; (iii) the breather and modulation frequencies are commensurate in a different form. We use for all of them the term Floquet breathers in analogy with Floquet solitons in photonic systems. As there is no dissipation, but periodic forcing, the energy is generally conserved but only at discrete times. There exists in this system a huge variety of breathers, site-centered, symmetric and antisymmetric, bond centered, and in-phase or in-quadrature with the modulation, and we analyze the evolution of stability of some of them as a function of the modulation frequency. The construction of a similar system would be of interest to study the properties of dynamic metamaterials., J.F.R.A. acknowledges the Laboratory of Microdynamics at the University of Osaka for hospitality. All the authors would like to thank Serge Aubry for the inspiration of his work. J.F.R.A., in particular, although he never worked directly with him, did so with close collaborators such as Robert Mackay and Jose Luis Marin in Cambridge, in 1997, where discussions with them over their common publications with Aubry became his introduction to research in this field. M.K. acknowledges support from JSPS Kakenhi (C) Nos. 24K07393 and 21K03935. J.F.R.A. and V.J.S.M. acknowledge Grant No. PID2022-138321NB-C22 funded by MICIU/AEI/10.13039/501100011033 and ERDF/EU. Y.D. acknowledges support from JSPS Kakenhi (C) No. 24K14978.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Chromatically resolved infrared light localization in a 3D chirped woodpile photonic structure

  • Otero Picón, Eva|||0009-0008-4417-3356
  • Soria Pastor, Bertran
  • Malinauskas, Mangirdas
  • Gailevicius, Darius
  • Mizeikis, Vygantas
  • Juodkazis, Saulius
  • Staliunas, Kestutis|||0000-0002-0539-9538
  • Trull Silvestre, José Francisco|||0000-0002-5850-088X
  • Cojocaru, Crina|||0000-0002-5244-8427
Engineering materials with tailored optical properties remain a key challenge in photonics. We report the design, fabrication, and experimental characterization of a three-dimensional chirped woodpile photonic crystal with nanometric features, produced via two-photon laser lithography. The structure exhibits wavelength-dependent light localization and intensity enhancement in the near-infrared regime, achieved through group velocity reduction. This effect arises from a gradual lattice-period chirp along the propagation direction, inducing a frequency-dependent bandgap shift and spatial separation of localized wavelengths. We propose an experimental technique capable of sensing the infrared light localization inside the crystal through the measurement of the transversely scattered light. We confirm, for the first time to our knowledge, strong localization in the 1400 to 1700 nm range, with longer wavelengths penetrating deeper into the crystal, consistent with numerical simulations. These findings open new opportunities for infrared photonic applications requiring enhanced light–matter interactions, including optical sensing, photoluminescence, advanced light sources, and nonlinear optical processes.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Chromatically resolved infrared light localization in a 3D chirped woodpile photonic structure

  • Otero Picón, Eva
  • Soria Pastor, Bertran
  • Malinauskas, Mangirdas
  • Gailevicius, Darius
  • Mizeikis, Vygantas
  • Juodkazis, Saulius
  • Staliunas, Kestutis
  • Trull Silvestre, José Francisco
  • Cojocaru, Crina
Engineering materials with tailored optical properties remain a key challenge in photonics. We report the design, fabrication, and experimental characterization of a three-dimensional chirped woodpile photonic crystal with nanometric features, produced via two-photon laser lithography. The structure exhibits wavelength-dependent light localization and intensity enhancement in the near-infrared regime, achieved through group velocity reduction. This effect arises from a gradual lattice-period chirp along the propagation direction, inducing a frequency-dependent bandgap shift and spatial separation of localized wavelengths. We propose an experimental technique capable of sensing the infrared light localization inside the crystal through the measurement of the transversely scattered light. We confirm, for the first time to our knowledge, strong localization in the 1400 to 1700 nm range, with longer wavelengths penetrating deeper into the crystal, consistent with numerical simulations. These findings open new opportunities for infrared photonic applications requiring enhanced light–matter interactions, including optical sensing, photoluminescence, advanced light sources, and nonlinear optical processes., Postprint (published version)