Pasar al contenido principal

DESARROLLO DE ELECTROCATALIZADORES SOPORTADOS EN CARBONO PARA LA HIDROLISIS DE AGUA DE MAR

PID2022-138442OB-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effective, versatile and inexpensive extruder system for direct ink writing of high-viscosity pastes

  • Rodríguez Lagar, Pablo
  • Reguera-García, Alejandro
  • LlamasUnzueta, Raúl
  • Rodrı́guez, Clara
  • Santamaría Ramírez, Ricardo
  • Montes Morán, Miguel Ángel
  • Menéndez Díaz, José Ángel
  • Rocha, Victoria G.
We offer the possibility of implementing a lab-made extruder for direct ink writing (DIW) into a conventional fused deposition modelling (FDM) 3D printer. The ink extruder was designed to comply with various requirements including the possibility of using multiple syringe volumes, ease of assembly, compatibility with numerous commercial FDM printers, ink retraction and ink flow control and the ability to extrude inks with a wide range of viscosities (ink yield stresses from 135 to 1100 Pa). The load in the extruder was attained by combining a stepper motor and a gear reduction system. The reduction system was connected to a trapezoidal threaded spindle through a rigid coupler. The movement of the spindle was transmitted to the plunger of a syringe that contained the ink (with volumes ranging from 3 to 30 mL), by means of a linear guide system. Most of the extruder parts were printed with the same FDM printer to which the DIW extruder ended attached to. The DIW extruder wiring connections were simply made by using the E-axis connectors available in the FDM printer. Modifications of the FDM printer software required for the correct control of the DIW extruder were also relatively simple, avoiding firmware modification. This simplicity made the two DIW and FDM heads easily interchangeable, thus amplifying the functionality of a conventional FDM printer. The cost of this new DIW extruder is approx. 100€., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This research was funded by the Spanish Ministry of Science and Innovation, Grants PID2020-115334GB-I00 and PID2022-138442OB-C21 (MCIN/AEI/10.13039/501100011033); Grants TED2021-130372BC41 and CNS2022-135465 funded by MCIN/AEI/10.13039/501100011033 and by the “European Union Next Generation EU/PRTR”; and by the Principado de Asturias (FICYT) - European Union (FEDER) (Project PCTI-Asturias IDI/2021/000015)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

NiFe and NiCo core-shell nanoparticles supported on graphene as efficient catalysts for oxygen evolution reaction

  • López García, Miriam
  • González-Ingelmo, María
  • Usoltsev, Oleg
  • Oropeza, Freddy E.
  • Timoshenko, Janis
  • Roldán Cuenya, Beatriz
  • Santamaría Ramírez, Ricardo
  • Blanco Rodríguez, Clara
  • Rocha, Victoria G.
The development of inexpensive and abundant catalysts for water electrolysis is underway and a wide variety of transition metal-based carbon composites are being explored for the redox reactions involved in the electrochemical cycle of water, being Oxygen Evolution Reaction (OER) the bottleneck of this process. Herein, NiFe and NiCo core-shell nanoparticles supported on graphene 3D aerogels were developed for Oxygen Evolution Reaction. These hybrids were synthesised via freeze-casting method and thermal reduction, enabling an ultra-dispersion of the nanoparticles along the graphene oxide flakes, precise control over the nanoparticle size, and forming an active core-shell structure. The as-processed NiFe and NiCo core-shell nanoparticles consistently maintaining a low metal content of 10 wt% supported on graphene were successfully tested for OER and compared to the current state-of-the-art (NiFe Layered Double Hydroxides), obtaining overpotentials ranging from 400 to 450 mV at 10 mA cm<sup>−2</sup>, a Tafel slope of 84.8 mV dec<sup>−1</sup> and great stability over 12 h., This work was financially supported by the Spanish Ministry of Science and Innovation, Grants CNS2022-135465 and PID2022-138442OB-C21 funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR. Grant IDE/2024/00073 from SEKUENS (Gobierno del Principado de Asturias and EU-FEDER) F.E.O thanks MINECO and European NextGenerationEU/PRTR Fund for the Ramón y Cajal contract (RyC2021-034254-I). J.T. and B.R.C. acknowledge funding from the German Federal Ministry of Education and Research (Bundesministerium für Bildung und Forschung, BMBF) under Grant No. 03HY130I (AEM-Direct)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Desarrollo de electrocatalizadores soportados en carbono para la hidrólisis de agua de mar [Plan de gestión de datos], Development of carbon supported electrocatalysts for seawater splitting [Data management plan]

  • Blanco Rodríguez, Clara
  • Rocha, Victoria G.
SEA_H2 Data Management Plan (DMP) aims to provide an analysis of the main elements of the project’s data management policy. It is a living document that describes the data management from its collection, to its processing and handling and, finally, its later archiving and dissemination., This work was financially supported by the Spanish Ministry of Science and Innovation through project PID2022-138442OB-C21. Ley de la Ciencia España 2011 (Plan Estatal de investigación Científica y Técnica y de Innovación 2017-2020): Ministerio de Ciencia, Innovación y Universidades (España) y Agencia Estatal de Investigación (España), No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

All-carbon 3D-structured electrodes by direct ink writing as electrocatalyst supports for alkaline freshwater and seawater electrolysis

  • Muñiz Muñoz, Lucía
  • González-Ingelmo, María
  • Rodríguez Lagar, Pablo
  • López García, Miriam
  • Ruiz Esquius, Jonathan
  • Barreda García, Daniel
  • Santamaría Ramírez, Ricardo
  • Blanco Rodríguez, Clara
  • Rocha, Victoria G.
Water splitting is a key technology for green hydrogen production, yet important challenges persist, particularly as large-scale expansion is expected, with seawater electrolysis emerging as a promising alternative to mitigate freshwater limitations. Among these challenges, the development of active, selective, and long-term stable electrocatalysts is crucial. The design of the catalyst support plays a pivotal role, and three-dimensional (3D) supports offer unique opportunities to enhance performance and optimize electrochemical reactor configurations. In this study, we demonstrate the use of 3D-structured all-carbon electrodes by Direct Ink Writing (DIW) as versatile supports for electrocatalyst preparation. NiCo-CeO2/3D-Gr and NiFe/3D-Gr were synthesized by electrodeposition and employed as hydrogen evolution reaction and oxygen evolution reaction catalysts, respectively. Both electrodes exhibited excellent electrocatalytic behavior in alkaline and alkaline-saline media. Overall water splitting was conducted at 100 mA cm−2 for 200 h, achieving voltages below 2 V and exceptional stability. This work highlights the potential of 3D-structured all-carbon electrodes by DIW as a platform for advanced electrocatalyst development, offering tunable architectures and a pathway for future optimization., This work was financially supported by the Spanish Ministry of Science and Innovation, Grants CNS2022-135465 and PID2022-138442OB-C21 funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR and Grant IDE/2024/000737 from SEKUENS (Gobierno del Principado de Asturias and EU-FEDER). M.G.I. and M. L. acknowledge their predoctoral fellowships from the Asturias Regional Government (FICYT, Severo Ochoa Program BP20-168) and MICIN/AEI (PRE2020-095966), respectively. J.R.E. acknowledges his Fellowship from the Fundación General CSIC’s ComFuturo programme which has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 101034263., Peer reviewed