Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effective, versatile and inexpensive extruder system for direct ink writing of high-viscosity pastes

  • Rodríguez Lagar, Pablo
  • Reguera-García, Alejandro
  • LlamasUnzueta, Raúl
  • Rodrı́guez, Clara
  • Santamaría Ramírez, Ricardo
  • Montes Morán, Miguel Ángel
  • Menéndez Díaz, José Ángel
  • Rocha, Victoria G.
We offer the possibility of implementing a lab-made extruder for direct ink writing (DIW) into a conventional fused deposition modelling (FDM) 3D printer. The ink extruder was designed to comply with various requirements including the possibility of using multiple syringe volumes, ease of assembly, compatibility with numerous commercial FDM printers, ink retraction and ink flow control and the ability to extrude inks with a wide range of viscosities (ink yield stresses from 135 to 1100 Pa). The load in the extruder was attained by combining a stepper motor and a gear reduction system. The reduction system was connected to a trapezoidal threaded spindle through a rigid coupler. The movement of the spindle was transmitted to the plunger of a syringe that contained the ink (with volumes ranging from 3 to 30 mL), by means of a linear guide system. Most of the extruder parts were printed with the same FDM printer to which the DIW extruder ended attached to. The DIW extruder wiring connections were simply made by using the E-axis connectors available in the FDM printer. Modifications of the FDM printer software required for the correct control of the DIW extruder were also relatively simple, avoiding firmware modification. This simplicity made the two DIW and FDM heads easily interchangeable, thus amplifying the functionality of a conventional FDM printer. The cost of this new DIW extruder is approx. 100€., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This research was funded by the Spanish Ministry of Science and Innovation, Grants PID2020-115334GB-I00 and PID2022-138442OB-C21 (MCIN/AEI/10.13039/501100011033); Grants TED2021-130372BC41 and CNS2022-135465 funded by MCIN/AEI/10.13039/501100011033 and by the “European Union Next Generation EU/PRTR”; and by the Principado de Asturias (FICYT) - European Union (FEDER) (Project PCTI-Asturias IDI/2021/000015)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Self-supported FeCoNi(OH<inf>y</inf>)O<inf>x</inf> oxy-hydroxide doped with Cr and Cu as robust low-loading catalyst for the alkaline oxygen evolution reaction

  • Ruiz Esquius, Jonathan
  • González-Ingelmo, María
  • López García, Miriam
  • Vigil Laruelo, Adrián
  • Santamaría Ramírez, Ricardo
  • Blanco Rodríguez, Clara
  • Rocha, Victoria G.
Self-supported FeCoNi(OHy)Ox oxy-hydroxides co-doped with Cr and Cu were obtained from a CrFeCoNiCu low ordered high entropy precursor synthesised by electrodeposition onto carbon cloth fibres (act-CrFeCoNiCu/CC). For comparison a dopant-free FeCoNi(OHy)Ox catalyst (act-FeCoNi/CC) was also synthesised following the same route. No heat treatment was performed to retain their low ordered structure. When assessed towards the oxygen evolution reaction (OER) in alkaline electrolyte, act-CrFeCoNiCu/CC and act-FeCoNi/CC catalyst reached a comparable current density of 10 mA cm−2 at ca. 1.6 VRHE (η10 of 380–390 mV). Nevertheless, Cr and Cu co-doping translated into improved stability. Evident degradation was observed during OER for act-FeCoNi/CC after 12 h operating at 100 mA cm−2, whereas no signs of degradation were detected for act-CrFeCoNiCu/CC under the same reaction conditions. The latter catalyst even delivered a constant potential for 160 h at 50 mA cm−2 aided to the stabilizing effect of Cr and Cu co-doping., Jonathan Ruiz Esquius (of ComFuturo fellow) is supported by a fellowship from the Fundación General CSIC's ComFuturo programme which has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 101034263. The authors would like to also acknowledge the PID2022-143310OB-I00 and CNS2022-135465 projects funded by MICIN/AEI/10.13039/501100011033/FEDER, EU. M. López García and M. González-Ingelmo PhD thesis are funded by PRE2020-095966 and FICYT Severo Ochoa program BP20-168, respectively., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Direct Ink Writing of 3D-Structured All-Carbon Electrodes with High Electrical Conductivity for (Vanadium) Redox Flow Batteries

  • Rodríguez Lagar, Pablo
  • Concheso Álvarez, Alejandro
  • Barreda García, Daniel
  • González Arias, Zoraida
  • Montes Morán, Miguel Ángel
  • Menéndez Díaz, José Ángel
  • Blanco Rodríguez, Clara
  • Santamaría Ramírez, Ricardo
  • Rocha, Victoria G.
Redox flow batteries are attractive systems for large-scale energy storage due to their capability to uncouple energy and power but still need to make several improvements to reach full commercial scale. The need to search for better components, including electrode materials that allow the internal flow of electrolytes and have optimal electrochemical performance is a hot topic in the development of this kind of battery. The use of direct ink writing technology to engineer complex electrode materials both in the architecture and chemical composition opens a new field of research to optimize electrode performance. In this study, several formulations are prepared using graphite, multiwall carbon nanotubes, and two different Polyacrylonitrile (PAN)-based short carbon fibers. Furthermore, a graphitizable binder is added to the formulation to help consolidate the printed object into a highly conductive (3000-8000 Sm-1) and mechanically resistant carbon electrode after a moderate heat treatment (800 °C). The 3D electrodes are successfully tested in an all vanadium redox flow cell showing a competitive performance when compared to benchmark electrodes (graphite felts)., This work was financially supported by the Spanish Ministry of Science and Innovation, Grants TED2021-130372BC41 and CNS2022-135465 funded by MCIN/AEI/ 10.13039/501100011033 and by the EuropeanUnion NextGenerationEU/PRTR. Grant IDE/2024/00073 from SEKUENS(Gobierno del Principado de Asturias and EU-FEDER), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

NiFe and NiCo core-shell nanoparticles supported on graphene as efficient catalysts for oxygen evolution reaction

  • López García, Miriam
  • González-Ingelmo, María
  • Usoltsev, Oleg
  • Oropeza, Freddy E.
  • Timoshenko, Janis
  • Roldán Cuenya, Beatriz
  • Santamaría Ramírez, Ricardo
  • Blanco Rodríguez, Clara
  • Rocha, Victoria G.
The development of inexpensive and abundant catalysts for water electrolysis is underway and a wide variety of transition metal-based carbon composites are being explored for the redox reactions involved in the electrochemical cycle of water, being Oxygen Evolution Reaction (OER) the bottleneck of this process. Herein, NiFe and NiCo core-shell nanoparticles supported on graphene 3D aerogels were developed for Oxygen Evolution Reaction. These hybrids were synthesised via freeze-casting method and thermal reduction, enabling an ultra-dispersion of the nanoparticles along the graphene oxide flakes, precise control over the nanoparticle size, and forming an active core-shell structure. The as-processed NiFe and NiCo core-shell nanoparticles consistently maintaining a low metal content of 10 wt% supported on graphene were successfully tested for OER and compared to the current state-of-the-art (NiFe Layered Double Hydroxides), obtaining overpotentials ranging from 400 to 450 mV at 10 mA cm<sup>−2</sup>, a Tafel slope of 84.8 mV dec<sup>−1</sup> and great stability over 12 h., This work was financially supported by the Spanish Ministry of Science and Innovation, Grants CNS2022-135465 and PID2022-138442OB-C21 funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR. Grant IDE/2024/00073 from SEKUENS (Gobierno del Principado de Asturias and EU-FEDER) F.E.O thanks MINECO and European NextGenerationEU/PRTR Fund for the Ramón y Cajal contract (RyC2021-034254-I). J.T. and B.R.C. acknowledge funding from the German Federal Ministry of Education and Research (Bundesministerium für Bildung und Forschung, BMBF) under Grant No. 03HY130I (AEM-Direct)., Peer reviewed