Pasar al contenido principal

MODELIZACION DE ANALOGOS DE RESERVORIOS Y SIMULACION DE INYECCION DE CO2 Y DE H2 VERDE PARA EL GEO-ALMACENAMIENTO SOSTENIBLE

PID2022-140850OB-C22

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE BARCELONA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

¿Tiene la Sedimentología un papel en la transición energética? Una propuesta, Does Sedimentology have a role in the energy transition? A proposal

  • Viseras, C.
  • Cabello, P.
  • Yeste, L. M.
  • Alcalde, Juan
  • López-Blanco, M.
  • Cuevas, J. L.
  • Gil-Ortiz, M.
  • De Mesquita Veloso, F.
  • Caracciolo, L.
  • Heinemann, N.
  • Falivene, O.
  • Varela, A. N.
  • Rua-Alkain, E.
  • Blanco, A.
  • Jaímez, J.
El proyecto SOSGAS tiene por objeto calibrar el impacto de la heterogeneidad sedimentaria inherente a formaciones fluviales y deltaicas en el geo-almacenamiento sostenible de CO2 y H2 verde. Se han seleccionado 6 ejemplos mesozoicos y cenozoicos en la Meseta Ibérica, la Cuenca del Ebro y la Cuenca de Graus-Tremp a los que se aplica el flujo de trabajo OBO. Con esta base de datos de afloramiento y subsuelo se construyen modelos estáticos 3D de distribución de facies reservorio y sello y de propiedades petrofísicas, y finalmente se simula la inyección de los fluidos. Diferentes hipótesis de conectividad entre litofacies porosas y de distribución de los sellos conducen a diferentes escenarios de dinámica de fluidos y de entrampamiento. Con este proyecto iniciamos una línea de investigación que permitirá evaluar la validez de la sedimentología para contribuir al reto social de la transición energética., The SOSGAS project aims to gauge the impact of sedimentary heterogeneity inherent to fluvial and deltaic formations on the sustainability of a possible geo-storage of CO2 and green H2. 6 Mesozoic and Cenozoic examples have been selected in the Iberian Meseta, the Ebro Basin and the Graus-Tremp Basin to which the OBO workflow is applied. Using this outcrop and subsurface database, 3D static models are constructed to reproduce the distribution of reservoir and seal facies and petrophysical properties, and finally fluid injection is simulated. Different hypotheses of connectivity of porous lithofacies and seal distribution lead to different scenarios of fluid flow dynamics and trapping. With this project, we are initiating a line of research that will make it possible to assess the validity of sedimentology in contributing to the social challenge of the energy transition., Grants PID2022-140850OB-C21 and PID2022-140850OB-C22 funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”. REPSOL EP, CEPSA EP, ENAGAS, SLB, AGGEP, the MS2022-17 contract -NextGenerationEU- and the groups RNM369 (PAI) and 2021SGR00076 (GC) are also grateful.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sedimentology for energy transition: SOSGAS project, an example of workflow approach to reservoir quality assessment, Sedimentología para la transición energética: proyecto SOSGAS, un ejemplo de flujo de trabajo para la evaluación de calidad de reservorios

  • Viseras, C.
  • Cabello, P.
  • Yeste, L. M.
  • Alcalde, Juan
  • López-Blanco, M.
  • Cuevas, J. L.
  • Gil-Ortiz, M.
  • Caracciolo, L.
  • De Mesquita Veloso, F.
  • Heinemann, N.
  • Falivene, O.
  • Varela, A. N.
  • Rúa, E.
  • Blanco, A.
  • Jaímez, J.
The research workflow developed in the SOSGAS project is presented, aimed at the Quality Assessment as a reservoir of CO2 and green H2 of heterogeneous Mesozoic and Cenozoic fluvial and deltaic formations of the Iberian Meseta and the Ebro and Graus-Tremp Basins. Through the integrated study of outcrop and subsurface data (derived from boreholes drilled behind the outcrops), conceptual models are developed for each examined case, describing variations in sedimentary heterogeneities. These models contribute to the static modelling of different geobodies and their petrophysical properties. Finally, dynamic modelling, based on gas injection simulation experiments (CO2 and H2) into static models, enables the analysis of the sustainability of geo-storage projects for these key fluids in the energy transition., Grants PID2022-140850OB-C21 and PID2022-140850OB-C22 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. The support of the groups RNM369 (PAI), and 2021SGR00076 (GC). Additionally, we ac-knowledge the support of REPSOL EP, CEPSA EP, ENAGAS, SLB and AGGEP.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dynamic hydrogen working gas storage capacity in compartmentalised gas fields: The UK Rough storage site as a case study

  • Heinemann, N.
  • Edlmann, K.
  • Wilkinson, M.
  • Hassanpouryouzband, Aliakbar
  • Thaysen, Eike M.
  • Alcalde, Juan
  • Haszeldine, R. Stuart
The compartmentalised Permian sandstone reservoirs in the Southern North Sea are a prime candidate for po- tential future large-scale underground hydrogen storage (UHS) due to the oil and gas infrastructure in place, the advanced knowledge of the reservoirs and caprocks and their operational history as underground gas storage sites. Building on this potential, this study introduces a new method for estimating dynamic working gas storage capacity for depleted gas fields and existing natural gas storage sites, applied to the Rough field, the UK¿s largest gas storage site. This methodology, which produces standardised dynamic capacities and hence allows the comparison of different sites, is based on the establishment of a pressure equilibrium between hydrogen injected and withdrawn, which gives an improved representation of the hydrogen storage capacity of porous reservoirs. For this methodology, we use operational data, including injection and withdrawal pressure ranges, and propose the re-use of infrastructure to provide an improved first order dynamic capacity estimate for depleted gas fields or gas storage sites for hydrogen storage, but the user can change the configuration and undertake more site-specific investigations. The testing of the impact of technical changes on the estimated capacity, is illustrated by sensitivity analysis using different numbers of wells. The results show that while increasing the number of wells initially boosts working gas capacity and lower the cushion gas to working gas ratio efficiency, these benefits tail off beyond a certain number of wells added. Using this new methodology, we estimate for the Rough field a dynamic hydrogen storage capacity of 7.5 TWh (~79 BCF) and a cushion to working gas ratio of 2.1, using all 29 existing vertical wells. Reducing the well number shows a rapid decline in working gas capacity and an increase of the cushion gas to working gas ratio (e. g. down to 6.1 TWh (64 BCF) and up to 2.8, respectively, for scenarios with 15 wells). Additional factors, such as the low permeability of the underlying formations, the unrecovered natural gas in the Rough field, as well as the dependence of the capacity on accurate multi-phase fluid flow data, are also discussed. The site-specific working gas capacity can be further optimised by utilising a specifically designed storage development plan for the Rough storage site., We would like to thank Schlumberger for the Petrel and the E300 licence. Special thanks to Centrica Storage for their continuous support of our work on low-carbon energy applications. NH, AH, KE, ET and SH are funded by the Engineering and Physical Sciences Research Council (EPSRC) funded research project “HyStorPor” (grant number EP/S027815/1) and by the Fuel Cells and Hydrogen 2 Joint Undertaking under grant agreement No 101006632. KE has received funding from the European Union’s Horizon Europe Research and Innovation programme under the Marie Skłodowska-Curie Grant Agreement No. 101073271, SHINE project. JA are supported by Grant PID2022-140850OB-C21 funded by MICIU/AEI/10.13039/501100011033 and by “ERDF/EU". NH and JA are supported by Grant PID2022-140850OB-C22 funded by MICIU/AEI/10.13039/501100011033 and by “ERDF/EU". MW is funded by the Engineering and Physical Sciences Research Council (EPSRC) funded research project “HyStorPor” (grant number EP/S027815/1).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A review of experimental investigations on salt precipitation during CO2 geological storage

  • Sun, Xiaolong
  • Liu, Keyu
  • An, Senyou
  • Hellevang, Helge
  • Cao, Yingchang
  • Alcalde, Juan
  • Travé, Anna
  • Yuan, G.
  • Deng, Chenguang
  • Gómez Rivas, Enrique
Salt precipitation due to formation drying is a critical secondary alteration process that significantly impairs reservoir injectivity in the context of CO2 geological storage. In this work, salt precipitation during CO2 injection is reviewed primarily through various experimental studies. First, the experimental systems for salt precipitation studies, namely core-flooding, microfluidic-chip, static batch, and surface drying experimental systems, have been described to present their respective experimental procedures and merits, as well as corresponding applications. Subsequently, following the general description of the formation mechanisms of salt precipitation, the macro and micro salt distribution patterns at the reservoir and pore scales have been summarized. Finally, and most importantly, this study provides a comprehensive analysis of the controlling factors for salt precipitation, categorized into four different groups, according to the brine, rock, gas, and injection scenario aspects. Among all these factors, brine salinity, CO2 injection rate and initial reservoir properties are considered the most critical in determining the amount and distribution of precipitated salts and the degree of injectivity impairment. The effects of multi-scale reservoir heterogeneity and rock wettability on salt precipitation are attracting growing consideration, while the brine and gas composition studies are receiving less attention due to their relatively minor influences on reservoir alteration. Due to the limited specimen sizes, the ex-situ brine replenishment may be underestimated in core-flooding and microfluidic-chip experiments. This may result in a potentially significant underestimation of the volume of local salts and the potentially inaccurate prediction of the drying process during CO2 injection in many such experiments., Funding was provided by China University of Petroleum (East China) to the Independent Innovation Research Project 22CX06004A, by the Qingdao Municipal Bureau of Science and Technology to the Natural Science Project 23-2-1-55-zyyd-jch, by the Department of Science & Technology of Shandong Province to the Natural Science Project ZR2023QD093, and by the National Natural Science Foundation of China to the Natural Science Project 42402140. SA acknowledges the Open Research Project SKLDOG2024-KFYB-02 funded by the State Key Laboratory of Deep Oil and Gas and the Research Team Cultivation Program 2023QNT004 funded by Shenzhen University. HH acknowledges funding from Norway Grants (UMO2019/34/H/ST10/00564) and EEA and Norway Grants (NOR/POLNORCCS/AGaStor/0008/2019-00). JA acknowledges funding from MICIU/AEI/10.13039/501100011033 and “ERDF/EU” (PID2022-140850OB-C22). AT acknowledges Grant PID2021-12246NB-C22 funded by MICIU/AEI/10.13039/501100011033, FEDER, EU, and the Catalan Council to the Grup Consolidat de Recerca Reconegut Geologia Sedimentària (2021 SGR-Cat 00349). EGR acknowledges funding from the DGICYT Spanish Project PID-2020-118999GB-I00 funded by MCIN/AEI/10.13039/501100011033) and the “Consolidación Investigadora” Grant CNS2023-145382 funded by MCIN/AEI/10.13039/50110001103 and European Union NextGeneration EU/PRTR., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Characterization of the Miocene Castellón Sandstones Formation in the Western Mediterranean as a potential geological carbon storage site

  • Gil-Ortiz, M.
  • Gómez-Rivas, Enrique
  • Alcalde, Juan
  • Cabello, Patricia
  • Yeste, L. M.
  • Zamora, G.
  • Carrasco, Ángel
  • García Fernández-Valderrama, David
  • Martín-Monge, Antonio
  • Mañas, Marta
  • Olgado Azpiazu, María Victoria
  • Ron Martín, Manuel
  • Lukito, Pujianto
  • Pángaro, Francisco
In response to the growing interest in decarbonizing Europe's industrial hubs, this study examines the potential of the Miocene Castellón Sandstones Formation in the Valencia Trough for geological carbon storage. The proposed storage unit is represented by a siliciclastic succession formed mainly by sandstones and sandy heterolithics, in the Ebro Delta offshore area of the Valencia Trough. The sedimentological characterization of this succession, based on the study of a cored section from Amposta Marino C-2 well, has allowed to identify up to eleven lithofacies, comprising sandstones, heterolithics, calcarenites and carbonate breccias. These lithofacies can be grouped in six facies associations, including: 1) fluvial channel, 2) delta front proximal mouth bar, 3) delta front distal mouth bar, 4) proximal prodelta, 5) distal prodelta and 6) shelfal lag. The seismic stratigraphic analysis carried out throughout the study area points out to the additional presence of delta plain deposits in the northeastern sector of the study area, approximately at 30 km from the present-day Ebro delta shoreline. Based on the interpretation of these facies and seismic facies associations, the proposed depositional model consists of a river dominated, wave-influenced delta for the proto-Ebro deltaic system during the Late Miocene in the Valencia Trough. This study proposes that this sand-prone succession is presented as a good candidate for geological carbon storage in the study area, considering its proximity to the onshore Tarragona's industrial complex and its optimal reservoir characteristics. Additionally, the thick succession of the Ebro Shales also shows great potential as a vertical and lateral seal of the underlying Castellón Sandstones Formation., We acknowledge support from grant PID2020-118999 GB-I00 funded by MCIN/AEI/10.13039/501100011033, grants PID2022-140850OB-C21 and PID2022-140850OB-C22 funded by MICIU/AEI/10.13039/501100011033 and by “ERDF/EU”, the “Consolidación Investigadora” grants CNS2023-145382 (to Enrique Gomez-Rivas) funded by MCIN/AEI/10.13039/50110001103 and European Union NextGenerationEU/PRTR, and projects 2021 SGR 00349 “Geologia Sedimentària” and 2021 SGR 00076 “Geodinàmica i Anàlisi de Conques” funded by AGAUR are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

National climate strategies show inequalities in global development of carbon dioxide geological storage

  • Alcalde, Juan
  • Johnson, Gareth
  • Roberts, Jennifer J.
Carbon dioxide geological storage (CGS) is considered critical for limiting global average temperature rise to below 1.5 °C by mitigating fossil industrial emissions and delivering permanent Carbon Dioxide Removals. Here we examine the role of CGS in long-term national emission reduction strategies submitted to the UNFCCC under the Paris Agreement. We find that a third of countries plan to develop CGS for emissions mitigation only, and a third for both emissions mitigation and carbon removals, but no countries plan on CGS for carbon removals alone. Neither the presence or performance of CGS maturity assessments correspond to CGS plans. Climate strategies of high income countries with high historic oil and gas production show firmest commitment to CGS. These countries already have multiple advantages for implementing and benefiting from CGS, which raises inequalities and sensitivities that must be carefully considered when designing carbon market and climate finance policies and frameworks for CGS development., This project has received funding from the European Union’s Horizon Europe research and innovation programme under grant agreement No 101081521- UPTAKE - Bridging current knowledge gaps to enable the UPTAKE of carbon dioxide. JA received funding from Grant RYC2021-033872-I funded by MICIU/AEI /10.13039/501100011033 and by the European Union NextGenerationEU/PRTR, and from Grant PID2022-140850OB-C22 funded by MICIU/AEI/10.13039/501100011033 and by “ERDF/EU”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

CO2LOGIX: A first-order model of pressure-constrained CO2 geological storage growth at the basin scale

  • Jonge-Anderson, Iain de
  • Johnson, Gareth
  • Alcalde, Juan
  • Roberts, Jennifer J.
Subsurface pressure increases from CO2 injection can constrain injectivity and operating margins, reducing the dynamic capacity of CO2 geological storage systems. Engineered pressure management approaches are effective but carry additional cost and risk. Understanding the magnitude, interaction and evolution of these effects at the regional and multi-project scale is limited by computational demands and uncertainty over future deployment trajectories. This presents a limitation for climate-policy-informing frameworks such as Integrated Assessment Models (IAMs), which typically consider only static capacity in carbon capture and storage technology growth. We present CO2LOGIX, a new model which evaluates the scale of subsurface pressure buildup under different growth trajectories with computational efficiency. The model combines well-established analytical solutions describing pressure diffusion in the subsurface with a flexible logistic growth model, which informs well deployment rates and can be adjusted to reflect realistic development scenarios. We demonstrate the value of CO2LOGIX through a UK case study. In a modelled scenario based on historic industry growth rates, unmitigated pressure reaches upper bounds after 83 years, with ∼ 12 GtCO2 stored by 2100 – well above national targets of 4–6 GtCO2. However, short-term storage rates remain low (5 MtCO2/year by 2030 and 30 MtCO2/year by 2050), below recommended targets. Faster growth scenarios cause earlier pressure limit breaches, reducing available unmitigated capacity or requiring costly mitigation. Our findings underscore the importance of incorporating realistic pressure feedbacks between injection rates and long-term storage capacity into IAMs. CO2LOGIX provides a new first-order framework to anticipate and manage pressure limits in large-scale CO2 storage deployment., This project has received funding from the European Union’s Horizon Europe research and innovation programme under grant agreement No 101081521 - UPTAKE - Bridging current knowledge gaps to enable the UPTAKE of carbon dioxide. JA acknowledges funding from Grant PID2022-140850OBC22 funded by the Spanish MICIU/AEI/10.13039/501100011033 and by “ERDF/EU"., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Seepage detection of hydrogen: insights for underground hydrogen storage and natural hydrogen exploration

  • Elío, Javier
  • Mazadiego, L. F.
  • Alcalde, Juan
  • Eguilior, S.
  • Heinemann, N.
  • Hurtado, A.
  • Klusman, R. W.
  • Ledesma, S.
  • Llamas, A.
  • Rodríguez, R.
  • Sangolt, L.
  • Vaselli, O.
  • Miocic, J.
Underground hydrogen storage will be essential for storing large amounts of hydrogen (in terms of GWh of energy storage) over long periods (months to years), a critical aspect for the full deployment of the hydrogen value chain. Additionally, if naturally generated subsurface hydrogen were economically exploited, hydrogen could shift from being an energy carrier to an energy source. In both scenarios, the fundamental mechanisms controlling accumulation, storage, and retention of H2 are broadly similar, although their rates and timescales greatly differ, ranging from months to years in engineered storage systems to geological timescales in natural systems. Nevertheless, similar conceptual approaches and monitoring techniques can be applied to evaluate hydrogen migration in the subsurface. This study focuses on seepage detection, exploring the potential pathways leading to macro-, micro-, and mini-seepage and reviewing state-of-the-art monitoring techniques for their recognition and quantification. While seepage detection should prioritise direct H₂ observation, a site-specific geochemical–isotopic–hydrogeological toolkit is essential to discriminate true reservoir-sourced seepage from near-surface hydrogen generation. We provide a comprehensive analysis of surface geochemical detection methods, including soil gas and groundwater surveys, and discuss the interpretation of direct H2 measurements together with associated major gases and non-standard geochemical determinations., This work is part of the project UNDERGY (Ref. MIG-20211018), funded by the “Programa Misiones CDTI 2021” of the Spanish Ministry of Science and Innovation and the Next Generation EU Fund. L.S. is funded by the Center for Maritime Safety at Western Norway University of Applied Sciences (project number 2021/47798). JA and NH acknowledge Grant PID2022-140850OB-C22 funded by MICIU/AEI/https://doi.org/10.13039/501100011033 and by “ERDF/EU”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Post-injection induced-seismicity potential during Underground Hydrogen Storage in saline aquifers [Dataset]

  • Peter, Rebecca
  • Boyet, Auregan
  • Pacios, Pablo
  • Sachdeva, Sanchit
  • Vilarrasa, Víctor
  • Alcalde, Juan
[Description of methods used for collection/generation of data] The dataset represents a two-dimensional coupled hydro-mechanical numerical model of underground hydrogen storage in a saline, naturally fractured carbonate aquifer. The model is a conceptual analogue of the Hontomín CO2 pilot storage site (Spain), incorporating a gently domed reservoir, intersected by six faults having varying permeabilities. The model includes reservoir, caprock, underlying units, basement and overburden. Reservoir permeability evolves with volumetric strain, representing the opening and closing of natural fractures. Coupled stress equilibrium and liquid/gas mass-balance equations are solved, including hydrogen and brine phases. The model provides pressure, deformation and stress fields that can be used in subsequent fault-stability analyses. The model itself does not contain the subsequent rate-and-state seismicity calculations described in the associated manuscript., [Methods for processing the data] The model geometry, material properties, fault representations, initial and boundary conditions, and numerical settings were prepared as GiD/CODE_BRIGHT inputs. The supplied files are model setup and mesh files rather than a processed observational dataset. Derived stresses and fluid pressures were subsequently analysed for fault stability and seismicity in the associated research, but those analysis scripts are not included in this package., This dataset contains the input and configuration files for a 2D coupled hydro-mechanical model simulating underground hydrogen storage (UHS) operations. The model is an analogue of the Hontomin CO2 pilot storage site in Spain, representing a carbonate reservoir with strain dependent permeability and six faults having varying permeabilities. The injection zone is at 1.5km depth at a constant temperature of 44.86 deg Celsius. The model assumed an initial transpressional stress regime (S_V= S_H> S_h ), with S_h= 0.65S_v . The model simulates 90 days of injection and 90 days of resting period., The model was developed using GiD and CODE_BRIGHT. The main files are: * 40.5_4.gid: Code_Bright file of the model. * 40.5_4_gen.dat: Code_Bright input file containing the model parameters, material properties, initial and boundary conditions, and simulation settings. * 40.5_4_gri.dat: Code_Bright grid file containing the numerical mesh information. * root.dat: File with the name of the model., The remaining GiD files contain supporting model information, including material definitions, boundary conditions, mesh data and visualization settings. To run the simulation, the CODE_BRIGHT input and grid files must run with the Cb_2020_21.exe within the same folder., EU Horizon Europe Marie Skłodowska-Curie Actions Doctoral Network SHINE, grant 101073271; grant PID2022-140850OB-C22 (MICIU/AEI and ERDF/EU), File List: 40.5_4.geo GiD model geometry 40.5_4.cnd GiD model condition definitions, including boundary-condition types and fields. 40.5_4.lin GiD associated model data/line information; includes boundary-stress entries. 40.5_4.rdr GiD rendering/display settings file. 40.5_4.tree GiD XML tree/view configuration. 40.5_4.vv GiD viewing/visualisation settings 40.5_4.post.msh Two-dimensional mesh in GiD post-processing mesh format. 40.5_4_gen.dat CODE_BRIGHT general model/control input, including analysis settings. 40.5_4_gri.dat CODE_BRIGHT grid/mesh input data. root.dat Root model-name pointer; contains "40.5_4"., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Geometrical characterization of fracture systems using point clouds and SELF-Software, example of the Añisclo anticline carbonate platform, Central Pyrenees

  • García-Sellés, David|||0000-0002-5995-5712
  • Carola Molas, Eloi|||0000-0003-2528-150X
  • Gratacós Torrà, Òscar|||0000-0002-5328-9114
  • Cabello, Patrícia|||0000-0001-9291-6400
  • Muñoz, Josep Anton|||0000-0003-0740-879X
  • Ferrer, Oriol|||0000-0001-5545-9992
Natural fracture systems contribute significantly to rock mass anisotropies. Characterizing these systems is essential for understanding processes of fluid flow, energy exploration and storage, slope stability or tectonic processes that can affect the permeability or compaction of the material, as well as reflect its temporal evolution. This work presents a set of automatic and supervised algorithms integrated into the open-access software solution SEFL, designed to characterize fracture systems using remote sensing data sets. The software implements various strategies to quantify geometrical parameters with deterministic or stochastic descriptions, facilitating a detailed characterization of the fracture system for numerical simulations. Geological outcrops provide direct access to the rock masses and discontinuities, offering analogies with materials that are otherwise inaccessible for its direct study. The digital acquisition of the terrain using high-resolution techniques, such as Terrestrial Laser Scanner (TLS) or photogrammetry to obtain point clouds, enabled post-field studies, particularly for fracture systems that are complex, inaccessible, or large in scale. Additionally, SEFL offers a tool based on the concept of fracture stratigraphy to identify mechanical units, which are essential frameworks for measuring and calculating fracture properties. This new methodology has been applied to study the fractured Eocene limestone outcrop at the hinge of the Añisclo anticline (South-Central Pyrenees, NE Iberia) which has been digitally acquired and characterized. SEFL output data interpretations revealed an outcrop characterized by over two thousand modelled fractures, five fracture sets, fourteen fracture stratigraphic units, and 1-2 fractures/m.