Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Paleogene kinematics of the central Catalan Coastal Ranges, temporal constraints from magneto-chronology and provenance analysis in synorogenic deposits in the SE margin of the Ebro Basin (NE Spain)

  • Marín, Miquel
  • Carola Molas, Eloi|||0000-0003-2528-150X
  • Beamud, Elisabet|||0000-0003-3158-2966
  • Bover-Arnal, Telm|||0000-0002-5599-3711
  • López-Blanco, Miguel|||0000-0001-6763-0355
  • Garcés Crespo, Miguel|||0000-0001-7666-6392
  • Roca, Eduard|||0000-0002-0827-4175
  • Costa, Elisenda|||0000-0001-7917-0691
  • Ferrer, Oriol|||0000-0001-5545-9992
  • Cabrera, Lluís|||0000-0003-0995-310X
The precise determination of the tectonic deformation timing such as thrust emplacement has always been a challenge for understanding the evolution of fold-and-thrust belts. In the Catalan Coastal Ranges, this issue has traditionally been addressed through the mapping and the analysis of the syn-tectonic successions preserved in the SE margin of the Ebro Basin. However, the age of the Paleogene contractional structures located towards the hinterland and responsible of the inversion and uplift of the inherited Mesozoic structure remained uncertain due to the lack of preserved syn-kinematic strata in these areas. With the aim of better understand the contractional evolution of the area during the Paleogene, this work presents a tectono-stratigraphic analysis approach that combines structural reconstructions, provenance analysis and magnetostratigraphic dating in well-exposed synorogenic sediments in the central SE margin of the Ebro Basin. The results of the study allow to establish the precise age of the main contractional structures present in the central Catalan Coastal Ranges. The combined analysis has revealed that: 1) the inversion of the Montmell-Vallès Faults System started in the Bartonian and continued up to the late Priabonian, and 2) the emplacement of the Gaià-El Camp Thrust and the formation of the Cabra-Carme Anticline took place from early to late Priabonian and was the responsible of the sudden increased of the sedimentation rates. A later decrease of the sedimentation rates during late Priabonian (chron C15n) has been interpreted as the prelude of the end of the Paleogene compressional phase in the area.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Decapod fauna from the lower Aptian in the Valencian sector of the Maestrat Basin (NE Iberia)

  • Ossó, Àlex|||0000-0003-2528-9915
  • Artal, Pedro
  • Bakel, Barry W.M van
  • Ferrer, Oriol|||0000-0001-5545-9992
This study presents a initial assessment of the decapod fauna from the Lower Aptian Forcall Fm. in the Morella and Orpesa sub-basins of the Valencian sector of the Maestrat Basin. A total of thirteen taxa are documented, representing Nephropoidea, Paguroidea, Galatheoidea, Axiidea, and Brachyura. Among them, one new genus, three new species, and a new combination are proposed: Viapagurus covavidrensis n. sp., Eomunidopsis rigolleti n. sp., Morellosia maestratensis n. gen., n. sp., and Distefania pimientai n. comb. Comparisons with decapod faunas from other sub-basins of the Maestrat Basin suggest a notable faunal homogeneity across the region. Additionally, palaeobiogeographic implications are discussed, providing insights into the distribution and diversity of Aptian decapod crustaceans. These findings contribute to a more comprehensive understanding of the decapod assemblages of the Forcall Fm. and their relationship with coeval faunas in the western Maestrat Basin.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

New workflow for bridging the gap between geology knowledge and society, the example of the VIGEOCULT Project and the Orígens Geopark South-Central Pyrenees

  • Carola Molas, Eloi|||0000-0003-2528-150X
  • Muñoz, Josep Anton|||0000-0003-0740-879X
  • Santolaria, Pablo|||0000-0002-2408-809X
  • Gratacós Torrà, Òscar|||0000-0002-5328-9114
  • Ferrer, Oriol|||0000-0001-5545-9992
  • De Matteis, Marco|||0000-0002-0198-692X
  • Rivas Casamajó, Gonzalo
  • Galobart, Àngel|||0000-0003-1508-4561
  • Sellés, Albert|||0000-0002-4637-6084
  • Dinarès Cabrerizo, Oriol|||0000-0002-8494-5524
  • Mir, Xavier
  • Puras, Guillem|||0009-0003-4786-3452
  • Yagüe Medina, Aroa|||0009-0009-8144-7990
  • Vallès, Jan
  • Muñiz olivares, José Antonio
The effective dissemination of geological content in an engaging and easy-to-follow manner is challenging, especially because in most situations the general public has a limited geological background. This is particularly evident when considering dissemination outdoors. This study introduces a comprehensive workflow and methodology designed to transform complex geological research into accessible and engaging content for visitors to the Orígens UNESCO Global Geopark - hereinafter simply referred to as Orígens Geopark - in the southern Pyrenees. This workflow brings accurate geological research together with leading-edge graphical design techniques to create a set of outreach products such as virtual reality images, 3D models and 4D reconstructions of the past geological landscapes. Despite the potential of the workflow to create leading-edge dissemination products, some limitations have also been identified and are discussed here. This workflow developed for the project entitled "A natural open museum in the Pyrenees: virtual reality experience for dissemination and conservation of the geological and cultural heritage (VIGEOCULT) is applicable not only to Orígens Geopark but also in the tourism sector, educational (from elementary to university level) outreach in villages and schools, and public dissemination events.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

From scientific research to digital reconstruction, integration of historical documentation and VR experiences in Gerri de la Sal Project

  • Dinarès Cabrerizo, Oriol|||0000-0002-8494-5524
  • Carola Molas, Eloi|||0000-0003-2528-150X
  • Costa Badia, Xavier|||0000-0003-2454-1584
  • Vallès, Jan
  • Yagüe Medina, Aroa|||0009-0009-8144-7990
  • Mir Pellicer, Javier
  • Puras, Guillem|||0009-0003-4786-3452
  • Ferrer, Oriol|||0000-0001-5545-9992
  • Gratacós Torrà, Òscar|||0000-0002-5328-9114
  • Rivas Casamajó, Gonzalo
  • Sellés, Albert|||0000-0002-4637-6084
  • Santolaria, Pablo|||0000-0002-2408-809X
  • De Matteis, Marco|||0000-0002-0198-692X
  • Muñoz, Josep Anton|||0000-0003-0740-879X
There is a lack of bibliography concerning the specific methodology and limitations of historical data gathering to achieve high-quality and accurate productions of virtual reality (VR) and augmented reality (AR) technology applied to heritage dissemination. Most papers focus on the technical features and dissemination application of 3D and VR; the rigour of the research process specifically aimed at 3D reconstruction is usually not addressed, or taken into account by digitalization technicians. Although digitalization of heritage sites carried out by the same team or project in charge of its documentation mitigates the problem, several digitalization and public dissemination projects are conceived as a subsequent step, usually conducted by specialists or technicians not necessarily familiar with the heritage site's features. This paper addresses this methodological need through the researcher's experience in a multidisciplinary VR heritage project. The aim is to integrate historical research within the development of a VR museum within the Orígens UNESCO Global Geopark in the Catalan Pyrenees, Spain. Specifically, it explores the particular needs, challenges, and limitations of historical data gathering to accurately produce VR reconstructions of a cultural heritage site in Gerri de la Sal. The site involves studying a prehistoric salt production complex, a medieval monastery, and traditional salt-making processes. The experience has allowed the authors to propose a viable 3-step work plan to conduct research and documentation for VR dissemination. The result is a 7-minutes long VR documentary, to be displayed at the local museum of Gerri de la Sal, meeting the international VR reconstructions rigour guidelines. Thanks to successfully achieving this objective, the researchers have also addressed basic limitations of the proposed methodology and have proposed viable strategies to overcome them.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

From scientific research to digital reconstruction: integration of historical documentation and VR experiences in Gerri de la Sal Project, De la investigación científica a la reconstrucción digital: integración de la documentación histórica y de las experiencias RV en el proyecto Gerri de la Sal

  • Dinarès Cabrerizo, Oriol
  • Carola, Eloi
  • Costa Badia, Xavier
  • Vallès, Jan
  • Yagüe, Aroa
  • Mir Pellicer, Xavier
  • Puras, Guillem
  • Ferrer, Oriol
  • Gratacós, Òscar
  • Rivas, Gonzalo
  • Sellés, Albert
  • Muñiz, José Antonio
  • Santolaria, Pablo
  • De Matteis, Marco
  • Muñoz, Josep Antoni
[EN] There is a lack of bibliography concerning the specific methodology and limitations of historical data gathering to achieve high-quality and accurate productions of virtual reality (VR) and augmented reality (AR) technology applied to heritage dissemination. Most papers focus on the technical features and dissemination application of 3D and VR; the rigour of the research process specifically aimed at 3D reconstruction is usually not addressed, or taken into account by digitalization technicians. Although digitalization of heritage sites carried out by the same team or project in charge of its documentation mitigates the problem, several digitalization and public dissemination projects are conceived as a subsequent step, usually conducted by specialists or technicians not necessarily familiar with the heritage site s features. This paper addresses this methodological need through the researcher s experience in a multidisciplinary VR heritage project. The aim is to integrate historical research within the development of a VR museum within the Orígens UNESCO Global Geopark in the Catalan Pyrenees, Spain. Specifically, it explores the particular needs, challenges, and limitations of historical data gathering to accurately produce VR reconstructions of a cultural heritage site in Gerri de la Sal. The site involves studying a prehistoric salt production complex, a medieval monastery, and traditional salt-making processes. The experience has allowed the authors to propose a viable 3-step work plan to conduct research and documentation for VR dissemination. The result is a 7-minutes long VR documentary, to be displayed at the local museum of Gerri de la Sal, meeting the international VR reconstructions rigour guidelines. Thanks to successfully achieving this objective, the researchers have also addressed basic limitations of the proposed methodology and have proposed viable strategies to overcome them., [ES] Existe cierta falta de bibliografía centrada en la metodología específica y las limitaciones de la recopilación de datos históricos destinados a la producción de realidad virtual (RV) y realidad aumentada (RA) de calidad y rigor aplicadas a la divulgación del patrimonio. La mayoría de los artículos se centran en los procedimientos técnicos y las aplicaciones divulgativas de la reconstrucción 3D y la RV, mientras que el rigor del proceso de investigación específicamente destinado a la reconstrucción 3D no suele discutirse o se da por sentado por parte de los/las especialistas en digitalización. Aunque la digitalización de elementos patrimoniales llevada a cabo por el mismo equipo o proyecto encargado de su documentación mitiga este problema, un considerable número de proyectos de digitalización y divulgación se conciben como una fase ulterior, habitualmente realizada por especialistas o técnicos no necesariamente familiarizados/as con las características del elemento patrimonial en cuestión. Este artículo corrige esta necesidad metodológica a través de la experiencia del investigador, en un proyecto multidisciplinario de RV. El objetivo es combinar la investigación histórica con el desarrollo del Museo Virtual en el Geoparque UNESCO Orígens en los Pirineos catalanes, España. Específicamente, el artículo explora las necesidades concretas, los retos y las limitaciones del recabado de información histórica para producir reconstrucciones RV rigurosas de un espacio patrimonial, en Gerri de la Sal. Este espacio contiene un complejo prehistórico de producción salina, un monasterio medieval y un método tradicional de elaboración de sal. Esta experiencia permite proponer un plan de trabajo viable de 3 pasos para llevar a cabo la investigación y documentación, con la posterior divulgación en RV. El resultado es un documental de 7 minutos de RV, que atiende a las guías internacionales de rigor, proyectado en el museo local de Gerri de la Sal. El exitoso cumplimiento de este objetivo ha permitido, además, detectar limitaciones básicas en la metodología propuesta, además de proponer estrategias viables para superarlas., This work is part of the VIGEOCULT Project (PLEC2021-00793), funded by the Spanish Ministry of Science, Innovation and Universities through the State Research Agency, with funds from the European Union's NextGenerationEU program and the Recovery, Transformation, and Resilience Plan. Part of the methodology used has been developed within the GEODIGIT project (TED2021-130602B-I00) funded by MICIU/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR. We wish to acknowledge the collaboration of Marc Piera Teixidó and GRAMPO Grup de Recerca Arqueològica a la Mediterrània i al Pròxim Orient (2021 SGR 00744). Departament de Prehistòria. Universitat Autònoma de Barcelona.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Paleogene kinematics of the central Catalan Coastal Ranges: temporal constraints from magneto-chronology and provenance analysis in synorogenic deposits in the SE margin of the Ebro Basin (NE Spain)

  • Marín Pérez, Miquel Ángel
  • Carola, E.
  • Beamud, Elisabet
  • Bover-Arnal, T.
  • López-Blanco, M.
  • Garcés, Miguel
  • Roca, Eduard
  • Costa Gisbert, Elisenda
  • Ferrer, O.
  • Cabrera, Lluís
The precise determination of the tectonic deformation timing such as thrust emplacement has always been a challenge for understanding the evolution of fold-and-thrust belts. In the Catalan Coastal Ranges, this issue has traditionally been addressed through the mapping and the analysis of the syn-tectonic successions preserved in the SE margin of the Ebro Basin. However, the age of the Paleogene contractional structures located towards the hinterland and responsible of the inversion and uplift of the inherited Mesozoic structure remained uncertain due to the lack of preserved syn-kinematic strata in these areas. With the aim of better understand the contractional evolution of the area during the Paleogene, this work presents a tectono-stratigraphic analysis approach that combines structural reconstructions, provenance analysis and magnetostratigraphic dating in well-exposed synorogenic sediments in the central SE margin of the Ebro Basin. The results of the study allow to establish the precise age of the main contractional structures present in the central Catalan Coastal Ranges. The combined analysis has revealed that: i) the inversion of the Montmell-Vallès Faults System started in the Bartonian and continued up to the late Priabonian, and ii) the emplacement of the Gaià-El Camp Thrust and the formation of the Cabra-Carme Anticline took place from early to late Priabonian and was the responsible of the sudden increased of the sedimentation rates. A later decrease of the sedimentation rates during late Priabonian (chron C15n) has been interpreted as the prelude of the end of the Paleogene compressional phase in the area., This research has been carried out within the framework of the following projects: the IBERINSULA (PID2020-113912GB-I00), funded by MCIN/AEI/10.13039/501100011033; the MCIN Project IMPACSIS (PID2019-106440GB-C21) European Regional Development Fund (ERDF); the SABREM-PID2020-117598GB-I00 funded by MCIN/AEI/10.13039/501100011033; the DGICYT PID2021-122467NB-C22 Ministerio de Ciencia, Innovación y Universidades/Agencia Estatal de Investigación/Fondo Europeo de Desarrollo Regional; GEODIGIT (TED2021-130602B-I00) research projects funded by MCIN/AEI/10.13039/501100011033 for the European Union “NextGenerationEU”/PRTR. The Grups Consolidats de Recerca “Geologia Sedimentària” (2021-SGR-Cat 00349) and “Geodinàmica i Anàlisi de Conques” (2021-SGR 00076) of the Generalitat de Catalunya, and the UB Geomodels Research Institute are also acknowledged. The research has also been benefited by the project “Caracterització litoestratigràfica i estructural i cartografia geològica del Paleogen dels fulls de Sarral (67-31) i Montblanc (67-32) del Mapa Geològic de Catalunya 1:25000” funded by the Institut Cartogràfic i Geològic de Catalunya., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Geometrical characterization of fracture systems using point clouds and SELF-Software, example of the Añisclo anticline carbonate platform, Central Pyrenees

  • García-Sellés, David|||0000-0002-5995-5712
  • Carola Molas, Eloi|||0000-0003-2528-150X
  • Gratacós Torrà, Òscar|||0000-0002-5328-9114
  • Cabello, Patrícia|||0000-0001-9291-6400
  • Muñoz, Josep Anton|||0000-0003-0740-879X
  • Ferrer, Oriol|||0000-0001-5545-9992
Natural fracture systems contribute significantly to rock mass anisotropies. Characterizing these systems is essential for understanding processes of fluid flow, energy exploration and storage, slope stability or tectonic processes that can affect the permeability or compaction of the material, as well as reflect its temporal evolution. This work presents a set of automatic and supervised algorithms integrated into the open-access software solution SEFL, designed to characterize fracture systems using remote sensing data sets. The software implements various strategies to quantify geometrical parameters with deterministic or stochastic descriptions, facilitating a detailed characterization of the fracture system for numerical simulations. Geological outcrops provide direct access to the rock masses and discontinuities, offering analogies with materials that are otherwise inaccessible for its direct study. The digital acquisition of the terrain using high-resolution techniques, such as Terrestrial Laser Scanner (TLS) or photogrammetry to obtain point clouds, enabled post-field studies, particularly for fracture systems that are complex, inaccessible, or large in scale. Additionally, SEFL offers a tool based on the concept of fracture stratigraphy to identify mechanical units, which are essential frameworks for measuring and calculating fracture properties. This new methodology has been applied to study the fractured Eocene limestone outcrop at the hinge of the Añisclo anticline (South-Central Pyrenees, NE Iberia) which has been digitally acquired and characterized. SEFL output data interpretations revealed an outcrop characterized by over two thousand modelled fractures, five fracture sets, fourteen fracture stratigraphic units, and 1-2 fractures/m.