Pasar al contenido principal

TENICAS INNOVADORAS BASADAS EN CAMPOS ELECTRICOS PARA LA PREPARACION DE BATERIAS DE ESTADO SOLIDO

PID2022-141199OA-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE SEVILLA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Plasma-flash sintering: Metastable phase stabilization andevidence of ionized species

  • Gil-González, Eva
  • Taibi, Ahmed
  • Perejón, Antonio
  • Sánchez-Jiménez, Pedro E.
  • Pérez-Maqueda, Luis A.
The first demonstration of plasma-flash sintering (PFS) is presented in this work.PFS is performed under a low-pressure atmosphere that consecutively generatesplasma and flash events. It is shown, by using several combined characterizationtechniques, that PFS stabilizes metastable phases on the surface of the material,which may be partially, but not solely, attributed to the generation of oxygenvacancies, and induces the absorption of ionized species, if a reactive atmo-sphere is employed. Even though additional research is required to understandthe fundamentals of PFS, it is evidenced its potential to be used as a material sur-face engineering tool, which may widen the technological capabilities of flashsintering, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Flash Joule Heating-Boro/Carbothermal Reduction (FJH-BCTR): An approach for the instantaneous synthesis of transition metal diborides

  • Taibi, Ahmed
  • Gil-González, Eva
  • Sánchez-Jiménez, Pedro E.
  • Perejón, Antonio
  • Pérez-Maqueda, Luis A.
Transition metal diborides (TMB2), such as ZrB2 and HfB2, are a class of ultra-high-temperature ceramics (UHTCs) that have attracted considerable attention due to their performance in extreme environments. Their implementation is burdened by the high energetic requirement of traditional synthetic procedures. Here, we report a novel methodology, termed as Flash Joule Heating-Boro/Carbothermal Reduction (FJH-BCTR), for the instantaneous synthesis of phase-pure sub-micron powders of several TMB2 and composite within seconds and without any external source of heating. The immediate synthesis is attributed to the Joule heat generated by the current, enabling extremely fast heating and cooling rates and, therefore, avoiding excessive grain growth. The advantages of FJH-BCTR are thoroughly displayed and can be summarized as; highly efficient, it allows a dramatic drop in terms of energy and time; universal, several TMB2 and composite can be prepared; and flexible, different experimental parameters can be tuned to achieve the desired phase., This work has been funded by EU Next Generation funds and Spanish Ministry of Science and Innovation (projects TED2021-131839B–C22 and PDC2021-121552-C21). Funding from Spanish Ministry of Science and Innovation (PID2022-140815OB-C22 and PID2022-141199OA-I00) is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Plasma-flash sintering: Metastable phase stabilization and evidence of ionized species

  • Gil-González, Eva
  • Taibi, Ahmed
  • Perejón, Antonio
  • Sánchez-Jiménez, Pedro E.
  • Pérez-Maqueda, Luis A.
The first demonstration of plasma-flash sintering (PFS) is presented in this work. PFS is performed under a low-pressure atmosphere that consecutively generates plasma and flash events. It is shown, by using several combined characterization techniques, that PFS stabilizes metastable phases on the surface of the material, which may be partially, but not solely, attributed to the generation of oxygen vacancies, and induces the absorption of ionized species, if a reactive atmosphere is employed. Even though additional research is required to understand the fundamentals of PFS, it is evidenced its potential to be used as a material surface engineering tool, which may widen the technological capabilities of flash sintering., Spanish Ministry of Science and Innovation. Grant Numbers: PID2022-141199OA-I00, PID2022-140815OB-C22 Universidad de Sevilla. Grant Number: Project2023/00000377 Financial support is acknowledged from grants PID2022-141199OA-100 and PID2022-14081OB-C22 funded by the Spanish Ministry of Science and Innovation. Project 2023/00000377 VII Plan Propio Universidad de Sevilla is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Plasma-flash sintering II: Flashing ZnO at room temperature using low AC voltage

  • Gil-González, Eva
  • Manchón-Gordón, Alejandro F.
  • Perejón, Antonio
  • Sánchez-Jiménez, Pedro E.
  • Pérez-Maqueda, Luis A.
In this study, we have advanced the plasma-flash sintering (PFS) technique by demonstrating the preparation of dense ZnO ceramics at room temperature using a moderate electric field of 250 V cm−1 under a low-pressure nitrogen atmosphere. This specific environment facilitates the sequential occurrence of plasma generation followed by the flash sintering event. Compared to traditional flash sintering technique, our approach significantly reduces both energy consumption and processing time, while eliminating the need for a furnace. Impedance spectroscopy confirms that ZnO ceramic produced via this method exhibits enhanced electrical conductivity. Hence, PFS is shown to be a potential tool for tuning the electrical properties of sintered materials at room temperature while boosting energy efficiency., Financial support is acknowledged from grants PID2022-141199OA-100 and PID2022-1481OB-C22 funded by the Spanish Ministry of Science and Innovation and grant ProyExcel_00360 by Junta de Andalucía-Consejería de Conocimiento, Investigación y Universidad., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Step-wise current reactive flash sintering of Ba0.85Ca0.15Ti0.90Zr0.10O3 (BCZT) ceramics: Structure and electrical properties

  • Taibi, Ahmed
  • Gil-González, Eva
  • Yang, Bo
  • Wang, Haiyan
  • Zhang, Xinghang
  • García, José E.
  • Perejón, Antonio
  • Tsakalakos, Thomas
  • Pérez-Maqueda, Luis A.
  • Sánchez-Jiménez, Pedro E.
This study presents the first demonstration of the preparation of the lead-free piezoelectric ceramic Ba0.85Ca0.15Ti0.90Zr0.10O3 (BCZT) by reactive flash sintering (RFS). It is shown that by using step-wise current controlled ramps, it is possible to obtain homogeneous and phase-pure specimens at reduced furnace temperature (1100ºC) in 10 min. Thus, RFS allows synthesis and sintering to be performed in a single step, resulting in significant energy and time savings compared to conventional processes such as solid-state reaction, which typically require multiple stages such as calcination followed by sintering for long periods of time at temperatures typically higher than 1300ºC. The effect of the synthetic atmosphere on the final structural, microstructural, ferroelectric and piezoelectric properties of the obtained ceramics is evaluated by the simultaneous use of several characterization techniques. It is shown that structurally and microstructurally the tunable atmosphere has no noticeable effect, whereas significant differences were found in terms of ferroelectric and piezoelectric properties., This work has been supported by funds from Spanish Ministry of Science and Innovation (PID2022–140815OB-C22 and PID2022–141199OA-I00), which are acknowledged., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Step-wise current reactive flash sintering of Ba0.85Ca0.15Ti0.90Zr0.10O3 (BCZT) ceramics: structure and electrical properties

  • Taibi, Ahmed
  • Gil González, Eva
  • Yang, Bo
  • Wang, Haiyan
  • Zhang, Xinghang
  • García García, José Eduardo|||0000-0002-1232-1739
  • Perejón, Antonio
  • Tsakalakos, Thomas
  • Pérez Maqueda, Luis Allan
  • Sánchez Jiménez, Pedro Enrique
This study presents the first demonstration of the preparation of the lead-free piezoelectric ceramic Ba0.85Ca0.15Ti0.90Zr0.10O3 (BCZT) by reactive flash sintering (RFS). It is shown that by using step-wise current controlled ramps, it is possible to obtain homogeneous and phase-pure specimens at reduced furnace temperature (1100ºC) in 10¿min. Thus, RFS allows synthesis and sintering to be performed in a single step, resulting in significant energy and time savings compared to conventional processes such as solid-state reaction, which typically require multiple stages such as calcination followed by sintering for long periods of time at temperatures typically higher than 1300ºC. The effect of the synthetic atmosphere on the final structural, microstructural, ferroelectric and piezoelectric properties of the obtained ceramics is evaluated by the simultaneous use of several characterization techniques. It is shown that structurally and microstructurally the tunable atmosphere has no noticeable effect, whereas significant differences were found in terms of ferroelectric and piezoelectric properties., This work has been supported by funds from Spanish Ministry of Science and Innovation (PID2022-140815OB-C22 and PID2022-141199OA-I00), which are acknowledged., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Step-wise current reactive flash sintering of Ba0.85Ca0.15Ti0.90Zr0.10O3 (BCZT) ceramics: structure and electrical properties

  • Taibi, Ahmed
  • Gil González, Eva
  • Yang, Bo
  • Wang, Haiyan
  • Zhang, Xinghang
  • García García, José Eduardo
  • Perejón, Antonio
  • Tsakalakos, Thomas
  • Pérez Maqueda, Luis Allan
  • Sánchez Jiménez, Pedro Enrique
This study presents the first demonstration of the preparation of the lead-free piezoelectric ceramic Ba0.85Ca0.15Ti0.90Zr0.10O3 (BCZT) by reactive flash sintering (RFS). It is shown that by using step-wise current controlled ramps, it is possible to obtain homogeneous and phase-pure specimens at reduced furnace temperature (1100ºC) in 10¿min. Thus, RFS allows synthesis and sintering to be performed in a single step, resulting in significant energy and time savings compared to conventional processes such as solid-state reaction, which typically require multiple stages such as calcination followed by sintering for long periods of time at temperatures typically higher than 1300ºC. The effect of the synthetic atmosphere on the final structural, microstructural, ferroelectric and piezoelectric properties of the obtained ceramics is evaluated by the simultaneous use of several characterization techniques. It is shown that structurally and microstructurally the tunable atmosphere has no noticeable effect, whereas significant differences were found in terms of ferroelectric and piezoelectric properties., This work has been supported by funds from Spanish Ministry of Science and Innovation (PID2022-140815OB-C22 and PID2022-141199OA-I00), which are acknowledged., Peer Reviewed, Postprint (published version)
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Slight truncation changes in iron oxide nanocubes strongly affect their magnetic properties

  • Poon, Kingsley
  • López Martín, Raúl
  • Håkonsen, Verner
  • Yaacoub, Nader
  • Terán, Francisco J.
  • López Ortega, Alberto
  • Toro, José A. de
  • Singh, Gurvinder
The significant influence of nanoparticle (NP) size and morphology on their physical and chemical properties has been extensively investigated in recent decades. However, equating morphology solely with the overall shape overlooks finer surface characteristics. In this study, we introduce an advanced shape-fitting technique for the precise and automated extraction of NP characteristics from standard TEM images. This method captures detailed descriptors beyond size and shape, such as aspect ratio and radius of curvature, while maintaining statistical significance. Applying this approach, we identified a subtle difference in corner roundness between two batches of iron oxide nanocubes with identical size and aspect ratio distributions, synthesized consecutively under the same conditions. Yet, we report pronounced disparities in their magnetic properties and hyperthermia behavior. After ruling out internal variations through Mössbauer and X-ray absorption spectroscopies, these discrepancies are attributed to the slight morphological differences between the nanocubes via surface spin disorder. Beyond providing a thorough reproducibility assessment, our findings underscore the critical importance of precise morphological characterization in establishing reliable shape-property relationships, essential for informed NP design and adherence to good manufacturing practices., J.A.D.T. and R.L.M acknowledge financial support from the Spanish MCIN/AEI (grant PID2022-142267NB-I00) and from the Junta de Castilla-La Mancha (grant SBPLY/21/180501/000226). R.L.M. also acknowledges financial support from the Spanish MCIN/AEI (grant PID2022-141199OA-I00). A.L.O. acknowledges support from the grant CNS2022-135787 funded by MCIN/AEI/10.13039/501100011033 and European Union Next Generation EU/PRTR). We acknowledge Diamond Light Source for time on I10-1 beamline under proposal MM35696-1. K.P. and G.S. acknowledge the facilities and the scientific and technical assistance of Sydney Analytical, a core research facility at The University of Sydney. F.J.T. acknowledges funding from Spanish Ministry of Science and Innovation (PID2024-158994OB-C44, and "Severo Ochoa" program for Centres of Excellence in R&D CEX2020-001039-S) and Comunidad de Madrid (MAG4TIC, TEC-2024/TEC-380).