Pasar al contenido principal

MULTIPHYSICS-INFORMED DESIGN OF TUNABLE SMART MATERIALS

PID2022-141957OA-C22

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD POLITÉCNICA DE CARTAGENA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Stabilized mixed formulations for incompressible finite strain electromechanics including stress accurate analysis

  • Castañar Pérez, Inocencio|||0000-0003-4139-9380
  • Martínez Frutos, Jesús
  • Ortigosa Martínez, Rogelio|||0000-0002-4542-2237
  • Codina, Ramon|||0000-0002-7412-778X
In this study, we introduce a novel methodology for finite strain electromechanics that effectively addresses the incompressible limit. The primary innovation of this work is the first-time application of robust and accurate stabilized mixed formulations, previously developed by the authors for hyperelasticity, within the realm of electromechanics. These formulations incorporate the pressure field as an unknown variable, thereby facilitating the automatic attainment of the incompressible limit. Additionally, we consider the mechanical deviatoric stress tensor as a primary unknown, allowing for the design of finite element technology capable of managing incompressible behavior while ensuring high accuracy in the stress field and avoiding shear locking of thin solids. To enable the use of equal-order interpolations, we employ the orthogonal subgrid scale method for stabilization. Furthermore, the electromechanical problem is approached through a block-iterative staggered method. We present a series of numerical examples to assess the robustness and applicability of these formulations in solving complex finite strain electromechanics problems., This work was supported by the MICIU/AEI/10.13039/501100011033, Spain grant PID2022-141957OA-C22, and by “ERDF A way of making Europe.” Autonomous Community of the Region of Murcia, Spain, through the programme for the development of scientific and technical research by competitive groups (21996/PI/22), included in the Regional Programme for the Promotion of Scientific and Technical Research of Fundación Séneca – Agencia de Ciencia y Tecnología de la Región de Murcia. Institució Catalana de Recerca i Estudis Avançats (ICREA) Acadèmia Research Program of the Generalitat de Catalunya., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Hyper-reduced order modeling for nonlinear electromechanics using multi-field POD and ECM for dielectric elastomer actuators

  • Barillas Velásquez, Max|||0000-0002-4155-833X
  • Ortigosa, Rogelio
  • Martínez Frutos, Jesús
  • Hernández Ortega, Joaquín Alberto|||0000-0001-9334-4002
  • Ares de Parga Regalado, Sebastian|||0000-0001-5709-4683
  • Bonet Carbonell, Javier|||0000-0002-0430-5181
  • García González, Alberto|||0000-0003-2841-016X
This paper introduces a projection-based hyper-reduction methodology within the context of nonlinear electromechanics, specifically tailored for the simulation of dielectric elastomer actuators (DEAs). While high-fidelity finite element (FE) models are robust in capturing complex coupled multiphysics responses (in this case, coupling the quasi-static electric and hyperelastic mechanics responses), their high computational cost often renders them impractical for multi-query engineering problems such as material selection or optimal control. To overcome this limitation, we present a framework that combines a multi-field Proper Orthogonal Decomposition (POD) with the Empirical Cubature Method (ECM). This integration constitutes theone of the first applications of hyper-reduced order modeling (HROM) to handle the high-dimensional nonlinearities inherent in large-deformation electrical-mechanical coupling. A key advantage of this methodology is its ability to preserve the underlying mathematical structure of the high-fidelity FE framework. By treating the assembly of the reduced residual as a quadrature problem, our hyper-reduction scheme ensures that the variational consistency of the original problem is maintained. This guarantees that crucial properties of the tangent stiffness matrix, such as positive or negative definiteness, are inherited by the HROM, which is fundamental to robust and stable Newton–Raphson iterations for strongly nonlinear electromechanical problems. We validate the methodology through complex benchmarks, including a plate beam and a circular membrane geometry. For the most complex cases, the proposed HROM achieved a 35-fold speedup on a standard commercial CPU compared to the full-order model while maintaining a relative error below 1%. This was realized by solving in a reduced space with less than 0.05% of the original dimensionality and evaluating nonlinear operators on a reduced mesh containing less than 20% of the original elements. Finally, the framework is leveraged to perform an exhaustive parametric exploration of material properties for the Ecoflex polymer family under gravitational effects, demonstrating its utility for the accelerated design optimization and material selection in soft robotics., The authors would like to thank their respective funding grants. Research performed by M.B., R.O., J.M.F., J.B., and A.G.G. was financially supported via the project POTENTIAL (PID2022-141957OB-C211 and PID2022-141957OA-C22) funded by MICIU/AEI/10.13039/ 501100011033/ FEDER, UE., while the contributions of J.H., and S.A. were made possible through the support ofgs1 Grant PID2024-158878OB-C21 funded by MICIU/AEI /10.13039/ 501100011033 and by ERDF/EU. The author M.B. also acknowledges the funding PREP2022-000220 provided by MICIU/AEI/10.13039/ 501100011033 and the FSE+., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Finite strain thermoelasticity and the Third Law of thermodynamics

  • Bonet Carbonell, Javier|||0000-0002-0430-5181
  • Gil, Antonio J.
This paper shows that commonly used large strain thermoelastic models in which the specific heat coefficient is constant or, at most, changes with temperature, are incompatible with the Third Law of thermodynamics, namely, that “entropy should be zero at the Kelvin state, that is, absolute zero temperature”. In particular, it will be shown that the Third Law implies that the specific heat coefficient must vary with deformation for the coupling between mechanical and thermal effects to take place. In line with this result, a simple analytical constitutive model consistent with the Third Law will be proposed. The model will be based on a multiplicative decomposition of the specific heat into a deformation dependent part and a temperature dependent component. The resulting thermoelastic model complies with the Third Law and, in addition, the necessary convexity conditions that ensure the existence of real wave speeds. It can replicate existing entropic elasticity models for rubber, describe melting and softening behaviour, and converge to the classical relationships for linear thermoelasticity in the small strain regime., The authors acknowledge funding received from grants PID2022-141957OB-C21 and PID2022-141957OA-C22 financed by MCIN/AEI /10.13039/501100011033/ FEDER, UE. A. J. Gil wishes to acknowledge the support provided by the Defence, Science and Technology Laboratory (Dstl) and The Leverhulme Trust Foundation (UK) through a Leverhulme Fellowship., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A systematic comparison of membrane, shell, and 3D solid formulations for nonlinear vascular biomechanics

  • Kim, Taeouk|||0000-0003-2690-123X
  • Ortigosa Martínez, Rogelio|||0000-0002-4542-2237
  • Nama, Nitesh
  • Aguirre Font, Miquel|||0000-0003-1798-7908
  • Gil, Antonio J.
  • Humphrey, Jay D.
  • Figueroa, C. Alberto
Typical computational methods for vascular biosolid mechanics represent the blood vessel wall as a membrane, shell, or 3D solid. Each of these formulations has advantages and disadvantages concerning accuracy, ease of implementation, and computational costs. Despite the widespread use of these formulations, a systematic comparison of the performance and accuracy of these formulations for nonlinear vascular biomechanics has remained wanting. Therefore, the decision regarding the optimal choice often relies on intuition or previous experience, with unclear consequences of choosing one approach over the other. Here, we present a systematic comparison among three different formulations to represent the vessel wall as: (i) a nonlinear membrane, (ii) a nonlinear, rotation-free shell, and (iii) a nonlinear 3D solid. For the 3D solid model, we consider two different implementations employing linear and quadratic interpolation. Convergence analysis for displacement and stress are presented for all formulations. We compare results in both idealized and subject-specific mouse aortic geometries. For the idealized cylindrical geometry, we compare our results against the axisymmetric solution for five different wall thickness-to-radius ratios. Subsequently, a comparison of these approaches is presented for an idealized arterial bifurcation having regionally varying wall thickness. Lastly, we compare results for a subject-specific mouse geometry with regionally varying material properties and wall thickness. External tissue support boundary conditions model the effect of perivascular tissue. Based on our results, the rotation-free shell formulation represents the most advantageous compromise between computational cost and accuracy for large scale vascular biomechanics applications that include complex geometries., C.A. Figueroa acknowledges the support from National Institutes of Health, United States (R01-HL158723 and U01HL135842) and by the Edward B. Diethrich M.D. Professorship. Furthermore, Dr. Figueroa acknowledges (R01 HL105297) with J.D. Humphrey. N. Nama acknowledges the support from the American Heart Association, United States (23CDA1048343). R. Ortigosa acknowledges support of grant PID2022- 141957OA-C22 funded by MICIU/AEI/10.13039/501100011033 and by ERDF A way of making Europe, and also the support of grant 21996/PI/22 funded by Fundacion Seneca - Agencia de Ciencia y Tecnologia de la Region de Murcia. M. Aguirre acknowledges the support of Grant PID2022-136668OA-I00 funded by MCIN/AEI/10.13039/ 501100011033 and by ERDF A way of making Europe, and by grant RYC2023-042592-I funded by MICIU/AEI/10.13039/501100011033 and by ESF+. A.J. Gil acknowledges the support of The UK Leverhulme Trust through a Leverhulme Fellowship., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Generalised tangent stabilised nonlinear elasticity: An automated framework for controlling material and geometric instabilities

  • Poya, Roman
  • Ortigosa, Rogelio
  • Gil, Antonio J.
  • Kim, Theodore
  • Bonet Carbonell, Javier|||0000-0002-0430-5181
Tangent stabilised large strain isotropic elasticity was recently proposed by Poya et al. (2023) wherein by working directly with principal stretches the entire eigenstructure of constitutive and geometric/initial stiffness terms were found in closed-form, giving fresh insights into exact convexity conditions of highly non-convex functions in discrete settings. Consequently, owing to these newly found tangent eigenvalues an analytic tangent stabilisation was proposed (for common non-convex strain energies that exhibit material and/or geometric instabilities) bypassing incumbent numerical approaches routinely used in nonlinear finite element analysis. This formulation appears to be extremely robust for quasi-static simulation of complex deformations even with no load increments and time stepping while still capturing instabilities (similar to dynamic analysis) automatically in ways that are infeasible for path-following techniques in practice. In this work, we generalise the notion of tangent stabilised elasticity to virtually all known invariant formulations of nonlinear elasticity. We show that, closed-form eigen-decomposition of tangents is easily available irrespective of invariant formulation or integrity basis. In particular, we work out closed-form tangent eigensystems for isotropic Total Lagrangian deformation gradient ( )-based and right Cauchy–Green ( )-based as well as Updated Lagrangian left Cauchy–Green ( )-based formulations and present their exact convexity conditions postulated in terms of their corresponding tangent and geometric stiffness eigenvalues. In addition, we introduce the notion of geometrically stabilised polyconvex large strain elasticity for models that are materially stable but exhibit geometric instabilities for whom we construct their geometric stiffness in a spectrally-decomposed form analytically. We further extend this framework to the case of transverse isotropy where once again, closed-form tangent eigensystems are found for common transversely isotropic invariants. In this context, we augment the recent work on mixed variational formulations in principal stretches for deformable and rigid bodies, by presenting a mixed variational formulation for models with arbitrarily directed inextensible fibres. Since, tangent stabilisation unleashes an unparallelled capability for extreme deformations new numerical techniques are required to guarantee element-inversion-safe analysis. To this end, we propose a discretisation-aware load-stepping together with a line search scheme for a robust industry-grade implementation of tangent stabilised elasticity over general polyhedral meshes. Extensive comparisons with path-following techniques provide conclusive evidence that utilising tangent stabilised elasticity can offer both faster and automated results., The first author thanks Brent Meranda manager of the Meshing Framework, Discretisation, Simulation and Test Solutions, Siemens Digital Industries Software. The second author acknowledges the support of grant PID2022-141957OA-C22 funded by MICIU/AEI/10.13039/501100011033 and by ‘‘ERDF A way of making Europe’’. The second author also acknowledges the support provided by the Autonomous Community of the Region of Murcia, Spain through the programme for the development of scientific and technical research by competitive groups (21996/PI/22), included in the Regional Program for the Promotion of Scientific and Technical Research of Fundacion Seneca - Agencia de Ciencia 𝑦 Tecnologia de la Region de Murcia. The third author acknowledges the financial support received through the UK Defence, Science and Technology Laboratory, grants: DSTLX1000160466R and RQ0000028640., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Hyper-reduced order modeling for nonlinear electromechanics using multi-field POD and ECM for dielectric elastomer actuators

  • Barillas Velásquez, Max
  • Ortigosa, Rogelio
  • Martínez Frutos, Jesús
  • Hernández Ortega, Joaquín Alberto
  • Ares de Parga Regalado, Sebastian
  • Bonet Carbonell, Javier
  • García González, Alberto
This paper introduces a projection-based hyper-reduction methodology within the context of nonlinear electromechanics, specifically tailored for the simulation of dielectric elastomer actuators (DEAs). While high-fidelity finite element (FE) models are robust in capturing complex coupled multiphysics responses (in this case, coupling the quasi-static electric and hyperelastic mechanics responses), their high computational cost often renders them impractical for multi-query engineering problems such as material selection or optimal control. To overcome this limitation, we present a framework that combines a multi-field Proper Orthogonal Decomposition (POD) with the Empirical Cubature Method (ECM). This integration constitutes theone of the first applications of hyper-reduced order modeling (HROM) to handle the high-dimensional nonlinearities inherent in large-deformation electrical-mechanical coupling. A key advantage of this methodology is its ability to preserve the underlying mathematical structure of the high-fidelity FE framework. By treating the assembly of the reduced residual as a quadrature problem, our hyper-reduction scheme ensures that the variational consistency of the original problem is maintained. This guarantees that crucial properties of the tangent stiffness matrix, such as positive or negative definiteness, are inherited by the HROM, which is fundamental to robust and stable Newton–Raphson iterations for strongly nonlinear electromechanical problems. We validate the methodology through complex benchmarks, including a plate beam and a circular membrane geometry. For the most complex cases, the proposed HROM achieved a 35-fold speedup on a standard commercial CPU compared to the full-order model while maintaining a relative error below 1%. This was realized by solving in a reduced space with less than 0.05% of the original dimensionality and evaluating nonlinear operators on a reduced mesh containing less than 20% of the original elements. Finally, the framework is leveraged to perform an exhaustive parametric exploration of material properties for the Ecoflex polymer family under gravitational effects, demonstrating its utility for the accelerated design optimization and material selection in soft robotics., The authors would like to thank their respective funding grants. Research performed by M.B., R.O., J.M.F., J.B., and A.G.G. was financially supported via the project POTENTIAL (PID2022-141957OB-C211 and PID2022-141957OA-C22) funded by MICIU/AEI/10.13039/ 501100011033/ FEDER, UE., while the contributions of J.H., and S.A. were made possible through the support ofgs1 Grant PID2024-158878OB-C21 funded by MICIU/AEI /10.13039/ 501100011033 and by ERDF/EU. The author M.B. also acknowledges the funding PREP2022-000220 provided by MICIU/AEI/10.13039/ 501100011033 and the FSE+., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Finite strain thermoelasticity and the Third Law of thermodynamics

  • Bonet Carbonell, Javier
  • Gil, Antonio J.
This paper shows that commonly used large strain thermoelastic models in which the specific heat coefficient is constant or, at most, changes with temperature, are incompatible with the Third Law of thermodynamics, namely, that “entropy should be zero at the Kelvin state, that is, absolute zero temperature”. In particular, it will be shown that the Third Law implies that the specific heat coefficient must vary with deformation for the coupling between mechanical and thermal effects to take place. In line with this result, a simple analytical constitutive model consistent with the Third Law will be proposed. The model will be based on a multiplicative decomposition of the specific heat into a deformation dependent part and a temperature dependent component. The resulting thermoelastic model complies with the Third Law and, in addition, the necessary convexity conditions that ensure the existence of real wave speeds. It can replicate existing entropic elasticity models for rubber, describe melting and softening behaviour, and converge to the classical relationships for linear thermoelasticity in the small strain regime., The authors acknowledge funding received from grants PID2022-141957OB-C21 and PID2022-141957OA-C22 financed by MCIN/AEI /10.13039/501100011033/ FEDER, UE. A. J. Gil wishes to acknowledge the support provided by the Defence, Science and Technology Laboratory (Dstl) and The Leverhulme Trust Foundation (UK) through a Leverhulme Fellowship., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Generalised tangent stabilised nonlinear elasticity: An automated framework for controlling material and geometric instabilities

  • Poya, Roman
  • Ortigosa, Rogelio
  • Gil, Antonio J.
  • Kim, Theodore
  • Bonet Carbonell, Javier
Tangent stabilised large strain isotropic elasticity was recently proposed by Poya et al. (2023) wherein by working directly with principal stretches the entire eigenstructure of constitutive and geometric/initial stiffness terms were found in closed-form, giving fresh insights into exact convexity conditions of highly non-convex functions in discrete settings. Consequently, owing to these newly found tangent eigenvalues an analytic tangent stabilisation was proposed (for common non-convex strain energies that exhibit material and/or geometric instabilities) bypassing incumbent numerical approaches routinely used in nonlinear finite element analysis. This formulation appears to be extremely robust for quasi-static simulation of complex deformations even with no load increments and time stepping while still capturing instabilities (similar to dynamic analysis) automatically in ways that are infeasible for path-following techniques in practice. In this work, we generalise the notion of tangent stabilised elasticity to virtually all known invariant formulations of nonlinear elasticity. We show that, closed-form eigen-decomposition of tangents is easily available irrespective of invariant formulation or integrity basis. In particular, we work out closed-form tangent eigensystems for isotropic Total Lagrangian deformation gradient ( )-based and right Cauchy–Green ( )-based as well as Updated Lagrangian left Cauchy–Green ( )-based formulations and present their exact convexity conditions postulated in terms of their corresponding tangent and geometric stiffness eigenvalues. In addition, we introduce the notion of geometrically stabilised polyconvex large strain elasticity for models that are materially stable but exhibit geometric instabilities for whom we construct their geometric stiffness in a spectrally-decomposed form analytically. We further extend this framework to the case of transverse isotropy where once again, closed-form tangent eigensystems are found for common transversely isotropic invariants. In this context, we augment the recent work on mixed variational formulations in principal stretches for deformable and rigid bodies, by presenting a mixed variational formulation for models with arbitrarily directed inextensible fibres. Since, tangent stabilisation unleashes an unparallelled capability for extreme deformations new numerical techniques are required to guarantee element-inversion-safe analysis. To this end, we propose a discretisation-aware load-stepping together with a line search scheme for a robust industry-grade implementation of tangent stabilised elasticity over general polyhedral meshes. Extensive comparisons with path-following techniques provide conclusive evidence that utilising tangent stabilised elasticity can offer both faster and automated results., The first author thanks Brent Meranda manager of the Meshing Framework, Discretisation, Simulation and Test Solutions, Siemens Digital Industries Software. The second author acknowledges the support of grant PID2022-141957OA-C22 funded by MICIU/AEI/10.13039/501100011033 and by ‘‘ERDF A way of making Europe’’. The second author also acknowledges the support provided by the Autonomous Community of the Region of Murcia, Spain through the programme for the development of scientific and technical research by competitive groups (21996/PI/22), included in the Regional Program for the Promotion of Scientific and Technical Research of Fundacion Seneca - Agencia de Ciencia 𝑦 Tecnologia de la Region de Murcia. The third author acknowledges the financial support received through the UK Defence, Science and Technology Laboratory, grants: DSTLX1000160466R and RQ0000028640., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A systematic comparison of membrane, shell, and 3D solid formulations for nonlinear vascular biomechanics

  • Kim, Taeouk
  • Ortigosa Martínez, Rogelio
  • Nama, Nitesh
  • Aguirre Font, Miquel
  • Gil, Antonio J.
  • Humphrey, Jay D.
  • Figueroa, C. Alberto
Typical computational methods for vascular biosolid mechanics represent the blood vessel wall as a membrane, shell, or 3D solid. Each of these formulations has advantages and disadvantages concerning accuracy, ease of implementation, and computational costs. Despite the widespread use of these formulations, a systematic comparison of the performance and accuracy of these formulations for nonlinear vascular biomechanics has remained wanting. Therefore, the decision regarding the optimal choice often relies on intuition or previous experience, with unclear consequences of choosing one approach over the other. Here, we present a systematic comparison among three different formulations to represent the vessel wall as: (i) a nonlinear membrane, (ii) a nonlinear, rotation-free shell, and (iii) a nonlinear 3D solid. For the 3D solid model, we consider two different implementations employing linear and quadratic interpolation. Convergence analysis for displacement and stress are presented for all formulations. We compare results in both idealized and subject-specific mouse aortic geometries. For the idealized cylindrical geometry, we compare our results against the axisymmetric solution for five different wall thickness-to-radius ratios. Subsequently, a comparison of these approaches is presented for an idealized arterial bifurcation having regionally varying wall thickness. Lastly, we compare results for a subject-specific mouse geometry with regionally varying material properties and wall thickness. External tissue support boundary conditions model the effect of perivascular tissue. Based on our results, the rotation-free shell formulation represents the most advantageous compromise between computational cost and accuracy for large scale vascular biomechanics applications that include complex geometries., C.A. Figueroa acknowledges the support from National Institutes of Health, United States (R01-HL158723 and U01HL135842) and by the Edward B. Diethrich M.D. Professorship. Furthermore, Dr. Figueroa acknowledges (R01 HL105297) with J.D. Humphrey. N. Nama acknowledges the support from the American Heart Association, United States (23CDA1048343). R. Ortigosa acknowledges support of grant PID2022- 141957OA-C22 funded by MICIU/AEI/10.13039/501100011033 and by ERDF A way of making Europe, and also the support of grant 21996/PI/22 funded by Fundacion Seneca - Agencia de Ciencia y Tecnologia de la Region de Murcia. M. Aguirre acknowledges the support of Grant PID2022-136668OA-I00 funded by MCIN/AEI/10.13039/ 501100011033 and by ERDF A way of making Europe, and by grant RYC2023-042592-I funded by MICIU/AEI/10.13039/501100011033 and by ESF+. A.J. Gil acknowledges the support of The UK Leverhulme Trust through a Leverhulme Fellowship., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Stabilized mixed formulations for incompressible finite strain electromechanics including stress accurate analysis

  • Castañar Pérez, Inocencio
  • Martínez Frutos, Jesús
  • Ortigosa Martínez, Rogelio
  • Codina, Ramon
In this study, we introduce a novel methodology for finite strain electromechanics that effectively addresses the incompressible limit. The primary innovation of this work is the first-time application of robust and accurate stabilized mixed formulations, previously developed by the authors for hyperelasticity, within the realm of electromechanics. These formulations incorporate the pressure field as an unknown variable, thereby facilitating the automatic attainment of the incompressible limit. Additionally, we consider the mechanical deviatoric stress tensor as a primary unknown, allowing for the design of finite element technology capable of managing incompressible behavior while ensuring high accuracy in the stress field and avoiding shear locking of thin solids. To enable the use of equal-order interpolations, we employ the orthogonal subgrid scale method for stabilization. Furthermore, the electromechanical problem is approached through a block-iterative staggered method. We present a series of numerical examples to assess the robustness and applicability of these formulations in solving complex finite strain electromechanics problems., This work was supported by the MICIU/AEI/10.13039/501100011033, Spain grant PID2022-141957OA-C22, and by “ERDF A way of making Europe.” Autonomous Community of the Region of Murcia, Spain, through the programme for the development of scientific and technical research by competitive groups (21996/PI/22), included in the Regional Programme for the Promotion of Scientific and Technical Research of Fundación Séneca – Agencia de Ciencia y Tecnología de la Región de Murcia. Institució Catalana de Recerca i Estudis Avançats (ICREA) Acadèmia Research Program of the Generalitat de Catalunya., Peer Reviewed, Postprint (published version)