Pasar al contenido principal

INGENIERIA COMPUTACIONAL BASADA EN DATOS PARA ACTUACION FLEXIBLE

PID2022-141957OB-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario CENTRE INTERNACIONAL DE METODES NUMERICS A L ENGINYERIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A computational framework for large strain electromechanics of electro-visco-hyperelastic beams

  • Firouzi, Nasser
  • Rabczuk, Timon
  • Bonet Carbonell, Javier|||0000-0002-0430-5181
  • Zur, Krzysztof Kamil
In this paper, a new framework for large strain of electro-active viscoelastic polymeric beams is developed. The kinematical quantities of beam are derived, and then the constitutive equations of electromechanical beam are developed. To expand the formulation to viscoelastic regime, a generalization of quasi-linear viscoelasticity theory for electo-mechanical deformation is developed and called electro-mechanical quasi-linear viscoelastic (EM-QLV) theory. To deal with highly nonlinear formulation, a finite element formulation in Total Lagrangian framework is derived. Finally, to examine the applicability of the proposed model, several examples are presented and compared with the results in the literature., The third author acknowledges the financial support received via project POTENTIAL (PID2022-141957OB-C21) funded by MCIN/AEI/10.13039/501100011033/FEDER., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Hyper-reduced order modeling for nonlinear electromechanics using multi-field POD and ECM for dielectric elastomer actuators

  • Barillas Velásquez, Max|||0000-0002-4155-833X
  • Ortigosa, Rogelio
  • Martínez Frutos, Jesús
  • Hernández Ortega, Joaquín Alberto|||0000-0001-9334-4002
  • Ares de Parga Regalado, Sebastian|||0000-0001-5709-4683
  • Bonet Carbonell, Javier|||0000-0002-0430-5181
  • García González, Alberto|||0000-0003-2841-016X
This paper introduces a projection-based hyper-reduction methodology within the context of nonlinear electromechanics, specifically tailored for the simulation of dielectric elastomer actuators (DEAs). While high-fidelity finite element (FE) models are robust in capturing complex coupled multiphysics responses (in this case, coupling the quasi-static electric and hyperelastic mechanics responses), their high computational cost often renders them impractical for multi-query engineering problems such as material selection or optimal control. To overcome this limitation, we present a framework that combines a multi-field Proper Orthogonal Decomposition (POD) with the Empirical Cubature Method (ECM). This integration constitutes theone of the first applications of hyper-reduced order modeling (HROM) to handle the high-dimensional nonlinearities inherent in large-deformation electrical-mechanical coupling. A key advantage of this methodology is its ability to preserve the underlying mathematical structure of the high-fidelity FE framework. By treating the assembly of the reduced residual as a quadrature problem, our hyper-reduction scheme ensures that the variational consistency of the original problem is maintained. This guarantees that crucial properties of the tangent stiffness matrix, such as positive or negative definiteness, are inherited by the HROM, which is fundamental to robust and stable Newton–Raphson iterations for strongly nonlinear electromechanical problems. We validate the methodology through complex benchmarks, including a plate beam and a circular membrane geometry. For the most complex cases, the proposed HROM achieved a 35-fold speedup on a standard commercial CPU compared to the full-order model while maintaining a relative error below 1%. This was realized by solving in a reduced space with less than 0.05% of the original dimensionality and evaluating nonlinear operators on a reduced mesh containing less than 20% of the original elements. Finally, the framework is leveraged to perform an exhaustive parametric exploration of material properties for the Ecoflex polymer family under gravitational effects, demonstrating its utility for the accelerated design optimization and material selection in soft robotics., The authors would like to thank their respective funding grants. Research performed by M.B., R.O., J.M.F., J.B., and A.G.G. was financially supported via the project POTENTIAL (PID2022-141957OB-C211 and PID2022-141957OA-C22) funded by MICIU/AEI/10.13039/ 501100011033/ FEDER, UE., while the contributions of J.H., and S.A. were made possible through the support ofgs1 Grant PID2024-158878OB-C21 funded by MICIU/AEI /10.13039/ 501100011033 and by ERDF/EU. The author M.B. also acknowledges the funding PREP2022-000220 provided by MICIU/AEI/10.13039/ 501100011033 and the FSE+., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Finite strain thermoelasticity and the Third Law of thermodynamics

  • Bonet Carbonell, Javier|||0000-0002-0430-5181
  • Gil, Antonio J.
This paper shows that commonly used large strain thermoelastic models in which the specific heat coefficient is constant or, at most, changes with temperature, are incompatible with the Third Law of thermodynamics, namely, that “entropy should be zero at the Kelvin state, that is, absolute zero temperature”. In particular, it will be shown that the Third Law implies that the specific heat coefficient must vary with deformation for the coupling between mechanical and thermal effects to take place. In line with this result, a simple analytical constitutive model consistent with the Third Law will be proposed. The model will be based on a multiplicative decomposition of the specific heat into a deformation dependent part and a temperature dependent component. The resulting thermoelastic model complies with the Third Law and, in addition, the necessary convexity conditions that ensure the existence of real wave speeds. It can replicate existing entropic elasticity models for rubber, describe melting and softening behaviour, and converge to the classical relationships for linear thermoelasticity in the small strain regime., The authors acknowledge funding received from grants PID2022-141957OB-C21 and PID2022-141957OA-C22 financed by MCIN/AEI /10.13039/501100011033/ FEDER, UE. A. J. Gil wishes to acknowledge the support provided by the Defence, Science and Technology Laboratory (Dstl) and The Leverhulme Trust Foundation (UK) through a Leverhulme Fellowship., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Symmetrisation and hyperbolicity of first-order conservation laws in large strain compressible viscoelasticity using the smoothed particle hydrodynamics method

  • Lee, Chun Hean
  • Gil, Antonio J.
  • Jaugielavicius, Tadas
  • Richardson, Thomas|||0009-0008-7496-0115
  • Boyaval, Sébastien|||0000-0002-7813-5146
  • Violeau, Damien|||0000-0002-2213-5251
  • Bonet Carbonell, Javier|||0000-0002-0430-5181
This paper presents a new first-order hyperbolic framework with relaxation (or dissipation) terms for large strain viscoelastic solids. The framework is based on a compressible Maxwell-type viscoelastic model and integrates linear momentum conservation, geometric conservation laws, and evolution equations for internal variables. First, we propose a polyconvex strain energy function that is jointly convex with respect to the deformation measures and internal variables. Second, we introduce a generalised convex entropy function to symmetrise the hyperbolic system in terms of dual conjugate (entropy) variables. Third, we demonstrate that the system is hyperbolic (i.e., real wave speeds) under all deformation states, and that the relaxation terms correctly capture viscoelastic dissipation. Fourth, we present an upwinding Smoothed Particle Hydrodynamics (SPH) [1–3] scheme that enforces the second law of thermodynamics semi-discretely and uses the time rate of the generalised convex entropy to monitor internal dissipation and stabilise the simulation. Finally, the proposed framework is validated through numerical examples and benchmarked against the in-house Updated Reference Lagragian SPH [2,3] and vertex-centred finite volume [4–7] algorithms, demonstrating stability, accuracy, and consistent energy dissipation., CHL and TJ acknowledge support provided by FIFTY2 Technology GmbH (project 322835), AJG and TR from UK AWE (project PO 40062030), and JB from project POTENTIAL (PID2022-141957OB-C21) funded by MCIN/AEI/10.13039/501100011033/FEDER, UE. AJG also acknowledges support from The Leverhulme Trust Fellowship, and CHL acknowledges support from the RSE Personal Research Fellowship., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Adaptive reduced order modeling to assess peak stresses in heterogeneous arterial sections

  • Gahima, Stephan
  • Stefanati, Marco
  • Rodríguez Matas, José Félix
  • García González, Alberto|||0000-0003-2841-016X
  • Díez, Pedro|||0000-0001-6464-6407
We introduce an adaptive model reduction approach to compute peak Von Mises stress (pVMS) in heterogeneous arterial sections. The pipeline follows a standard two-phase process: first, we construct the training set of displacement snapshots obtained from the full order model offline, and then we compute pVMS in the online phase. We adaptively enrich the modal representation in critical regions (around the lumen and in calcified areas) using a level-set approach. Optimized for efficient pVMS computation, as a key plaque vulnerability indicator, this technique significantly reduces the computational cost of training machine learning models to classify plaque vulnerability based on pVMS., The authors acknowledge financial support provided by the Ministerio de Ciencia, Innovación y Universidades (MCIN/ AEI/10.13039/501100011033, MICIU/AEI/10.13039/501100011033/ FEDER, UE) through grants PID2022-141957OB-C21, PID2023-153082OB-I00 and CEX2018-000797-S; the Fondazione Regionale per la Ricerca Biomedica (Regione Lombardia), via project ID 3432721; and the Italian Ministry of University and Research (PRIN 2022, grant 2022ZKEP8S). The authors acknowledge Zhongzhao Teng of the University of Cambridge for providing the realistic 2D geometries used in this work. Funding Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Inverse nonlinear elastostatic analysis of heterogeneous pre-stressed arterial cross-sections with elastic bed supports: an unfitted approach

  • Gahima, Stephan
  • Stefanati, Marco
  • García González, Alberto|||0000-0003-2841-016X
  • Díez, Pedro|||0000-0001-6464-6407
  • Rodríguez Matas, José Félix
This manuscript presents a novel formulation for inverse finite elastostatics in problems with elastic bed support on the external boundary (elastic bed boundary condition), replacing the classical Dirichlet boundary condition. An unfitted strategy to compute the solution of the mechanical problem is devised, inspired in the Immersed Boundary (IB) framework, and using level sets to describe the geometry. The method is applied to study realistic atherosclerotic arterial sections, which are known to exhibit a pre-stressed configuration. Furthermore, we demonstrate that our method effectively identifies the unloaded configuration. Taking as reference a classical finite elements solver in a commercial code, the method presented results in error lower than 3% in displacements, for sufficiently fine meshes., The authors acknowledge financial support provided by the Ministerio de Ciencia, Innovación y Universidades (MCIN/AEI/10.13039/501100011033, MICIU/AEI/10.13039/501100011033/ FEDER, UE) through grants PID2020-113463RB-C33, PID2022-141957OB-C21 and CEX2018-000797-S; and the Fondazione Regionale per la Ricerca Biomedica (Regione Lombardia), via project ID 3432721. The authors acknowledge Zhongzhao Teng of the University of Cambridge for providing the realistic 2D geome-tries used in this work., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A Non-intrusive data-driven approach towards a solution of the inverse problem of bending dielectric elastomer actuators

  • Barillas Velásquez, Max|||0000-0002-4155-833X
  • Ortigosa, Rogelio
  • Martínez Frutos, Jesús
  • Bonet Carbonell, Javier|||0000-0002-0430-5181
  • García González, Alberto|||0000-0003-2841-016X
Dielectric Elastomer Actuators (DEAs), particularly bending DEAs, have gained significant attention due to their applications in soft robotics, biomimetic systems, and adaptive structures. Recent advancements in computational mechanics and the finite element method (FEM) have enabled accurate simulations of these actuators by incorporating their nonlinear mechanical behavior at large deformations and the coupling between mechanical and electrical responses. However, DEA design often involves solving inverse problems, which become computationally expensive when relying solely on direct simulations. To mitigate this cost, a fast surrogate model is needed. This study proposes a Reduced Order Model (ROM)-based methodology to efficiently determine the optimal locations and magnitudes of applied external potentials in a bending DEA to achieve a desired displacement response. The approach leverages nonlinear dimensionality reduction techniques, specifically Kernel Principal Component Analysis (kPCA) and Isometric Mapping (Isomap), to construct a surrogate model that accurately predicts DEA displacement responses from existing data without modifying the underlying FEM formulation. Using this surrogate model, the inverse problem is solved efficiently, achieving high accuracy (<2 % error) while significantly reducing computational cost. The methodology is validated on two different bending DEA geometries, demonstrating its effectiveness in both surrogate modeling and time-efficient inverse problem solving., The group acknowledge the financial support received via project POTENTIAL (PID2022-141957OB-C21) funded by MI-CIU/AEI/10.13039/501100011033/FEDER, UE. The first author also acknowledges the funding PREP2022-000220 provided by MICIU/AEI/10.13039/501100011033 and the FSE+., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Inverse nonlinear elastostatic analysis of heterogeneous pre-stressed arterial cross-sections with elastic bed supports: an unfitted approach

  • Gahima, Stephan
  • Stefanati, Marco
  • García González, Alberto
  • Díez, Pedro
  • Rodríguez Matas, José Félix
This manuscript presents a novel formulation for inverse finite elastostatics in problems with elastic bed support on the external boundary (elastic bed boundary condition), replacing the classical Dirichlet boundary condition. An unfitted strategy to compute the solution of the mechanical problem is devised, inspired in the Immersed Boundary (IB) framework, and using level sets to describe the geometry. The method is applied to study realistic atherosclerotic arterial sections, which are known to exhibit a pre-stressed configuration. Furthermore, we demonstrate that our method effectively identifies the unloaded configuration. Taking as reference a classical finite elements solver in a commercial code, the method presented results in error lower than 3% in displacements, for sufficiently fine meshes., The authors acknowledge financial support provided by the Ministerio de Ciencia, Innovación y Universidades (MCIN/AEI/10.13039/501100011033, MICIU/AEI/10.13039/501100011033/ FEDER, UE) through grants PID2020-113463RB-C33, PID2022-141957OB-C21 and CEX2018-000797-S; and the Fondazione Regionale per la Ricerca Biomedica (Regione Lombardia), via project ID 3432721. The authors acknowledge Zhongzhao Teng of the University of Cambridge for providing the realistic 2D geome-tries used in this work., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A Non-intrusive data-driven approach towards a solution of the inverse problem of bending dielectric elastomer actuators

  • Barillas Velásquez, Max
  • Ortigosa, Rogelio
  • Martínez Frutos, Jesús
  • Bonet Carbonell, Javier
  • García González, Alberto
Dielectric Elastomer Actuators (DEAs), particularly bending DEAs, have gained significant attention due to their applications in soft robotics, biomimetic systems, and adaptive structures. Recent advancements in computational mechanics and the finite element method (FEM) have enabled accurate simulations of these actuators by incorporating their nonlinear mechanical behavior at large deformations and the coupling between mechanical and electrical responses. However, DEA design often involves solving inverse problems, which become computationally expensive when relying solely on direct simulations. To mitigate this cost, a fast surrogate model is needed. This study proposes a Reduced Order Model (ROM)-based methodology to efficiently determine the optimal locations and magnitudes of applied external potentials in a bending DEA to achieve a desired displacement response. The approach leverages nonlinear dimensionality reduction techniques, specifically Kernel Principal Component Analysis (kPCA) and Isometric Mapping (Isomap), to construct a surrogate model that accurately predicts DEA displacement responses from existing data without modifying the underlying FEM formulation. Using this surrogate model, the inverse problem is solved efficiently, achieving high accuracy (<2 % error) while significantly reducing computational cost. The methodology is validated on two different bending DEA geometries, demonstrating its effectiveness in both surrogate modeling and time-efficient inverse problem solving., The group acknowledge the financial support received via project POTENTIAL (PID2022-141957OB-C21) funded by MI-CIU/AEI/10.13039/501100011033/FEDER, UE. The first author also acknowledges the funding PREP2022-000220 provided by MICIU/AEI/10.13039/501100011033 and the FSE+., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Symmetrisation and hyperbolicity of first-order conservation laws in large strain compressible viscoelasticity using the smoothed particle hydrodynamics method

  • Lee, Chun Hean
  • Gil, Antonio J.
  • Jaugielavicius, Tadas
  • Richardson, Thomas
  • Boyaval, Sébastien
  • Violeau, Damien
  • Bonet Carbonell, Javier
This paper presents a new first-order hyperbolic framework with relaxation (or dissipation) terms for large strain viscoelastic solids. The framework is based on a compressible Maxwell-type viscoelastic model and integrates linear momentum conservation, geometric conservation laws, and evolution equations for internal variables. First, we propose a polyconvex strain energy function that is jointly convex with respect to the deformation measures and internal variables. Second, we introduce a generalised convex entropy function to symmetrise the hyperbolic system in terms of dual conjugate (entropy) variables. Third, we demonstrate that the system is hyperbolic (i.e., real wave speeds) under all deformation states, and that the relaxation terms correctly capture viscoelastic dissipation. Fourth, we present an upwinding Smoothed Particle Hydrodynamics (SPH) [1–3] scheme that enforces the second law of thermodynamics semi-discretely and uses the time rate of the generalised convex entropy to monitor internal dissipation and stabilise the simulation. Finally, the proposed framework is validated through numerical examples and benchmarked against the in-house Updated Reference Lagragian SPH [2,3] and vertex-centred finite volume [4–7] algorithms, demonstrating stability, accuracy, and consistent energy dissipation., CHL and TJ acknowledge support provided by FIFTY2 Technology GmbH (project 322835), AJG and TR from UK AWE (project PO 40062030), and JB from project POTENTIAL (PID2022-141957OB-C21) funded by MCIN/AEI/10.13039/501100011033/FEDER, UE. AJG also acknowledges support from The Leverhulme Trust Fellowship, and CHL acknowledges support from the RSE Personal Research Fellowship., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Hyper-reduced order modeling for nonlinear electromechanics using multi-field POD and ECM for dielectric elastomer actuators

  • Barillas Velásquez, Max
  • Ortigosa, Rogelio
  • Martínez Frutos, Jesús
  • Hernández Ortega, Joaquín Alberto
  • Ares de Parga Regalado, Sebastian
  • Bonet Carbonell, Javier
  • García González, Alberto
This paper introduces a projection-based hyper-reduction methodology within the context of nonlinear electromechanics, specifically tailored for the simulation of dielectric elastomer actuators (DEAs). While high-fidelity finite element (FE) models are robust in capturing complex coupled multiphysics responses (in this case, coupling the quasi-static electric and hyperelastic mechanics responses), their high computational cost often renders them impractical for multi-query engineering problems such as material selection or optimal control. To overcome this limitation, we present a framework that combines a multi-field Proper Orthogonal Decomposition (POD) with the Empirical Cubature Method (ECM). This integration constitutes theone of the first applications of hyper-reduced order modeling (HROM) to handle the high-dimensional nonlinearities inherent in large-deformation electrical-mechanical coupling. A key advantage of this methodology is its ability to preserve the underlying mathematical structure of the high-fidelity FE framework. By treating the assembly of the reduced residual as a quadrature problem, our hyper-reduction scheme ensures that the variational consistency of the original problem is maintained. This guarantees that crucial properties of the tangent stiffness matrix, such as positive or negative definiteness, are inherited by the HROM, which is fundamental to robust and stable Newton–Raphson iterations for strongly nonlinear electromechanical problems. We validate the methodology through complex benchmarks, including a plate beam and a circular membrane geometry. For the most complex cases, the proposed HROM achieved a 35-fold speedup on a standard commercial CPU compared to the full-order model while maintaining a relative error below 1%. This was realized by solving in a reduced space with less than 0.05% of the original dimensionality and evaluating nonlinear operators on a reduced mesh containing less than 20% of the original elements. Finally, the framework is leveraged to perform an exhaustive parametric exploration of material properties for the Ecoflex polymer family under gravitational effects, demonstrating its utility for the accelerated design optimization and material selection in soft robotics., The authors would like to thank their respective funding grants. Research performed by M.B., R.O., J.M.F., J.B., and A.G.G. was financially supported via the project POTENTIAL (PID2022-141957OB-C211 and PID2022-141957OA-C22) funded by MICIU/AEI/10.13039/ 501100011033/ FEDER, UE., while the contributions of J.H., and S.A. were made possible through the support ofgs1 Grant PID2024-158878OB-C21 funded by MICIU/AEI /10.13039/ 501100011033 and by ERDF/EU. The author M.B. also acknowledges the funding PREP2022-000220 provided by MICIU/AEI/10.13039/ 501100011033 and the FSE+., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Finite strain thermoelasticity and the Third Law of thermodynamics

  • Bonet Carbonell, Javier
  • Gil, Antonio J.
This paper shows that commonly used large strain thermoelastic models in which the specific heat coefficient is constant or, at most, changes with temperature, are incompatible with the Third Law of thermodynamics, namely, that “entropy should be zero at the Kelvin state, that is, absolute zero temperature”. In particular, it will be shown that the Third Law implies that the specific heat coefficient must vary with deformation for the coupling between mechanical and thermal effects to take place. In line with this result, a simple analytical constitutive model consistent with the Third Law will be proposed. The model will be based on a multiplicative decomposition of the specific heat into a deformation dependent part and a temperature dependent component. The resulting thermoelastic model complies with the Third Law and, in addition, the necessary convexity conditions that ensure the existence of real wave speeds. It can replicate existing entropic elasticity models for rubber, describe melting and softening behaviour, and converge to the classical relationships for linear thermoelasticity in the small strain regime., The authors acknowledge funding received from grants PID2022-141957OB-C21 and PID2022-141957OA-C22 financed by MCIN/AEI /10.13039/501100011033/ FEDER, UE. A. J. Gil wishes to acknowledge the support provided by the Defence, Science and Technology Laboratory (Dstl) and The Leverhulme Trust Foundation (UK) through a Leverhulme Fellowship., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A computational framework for large strain electromechanics of electro-visco-hyperelastic beams

  • Firouzi, Nasser
  • Rabczuk, Timon
  • Bonet Carbonell, Javier
  • Zur, Krzysztof Kamil
In this paper, a new framework for large strain of electro-active viscoelastic polymeric beams is developed. The kinematical quantities of beam are derived, and then the constitutive equations of electromechanical beam are developed. To expand the formulation to viscoelastic regime, a generalization of quasi-linear viscoelasticity theory for electo-mechanical deformation is developed and called electro-mechanical quasi-linear viscoelastic (EM-QLV) theory. To deal with highly nonlinear formulation, a finite element formulation in Total Lagrangian framework is derived. Finally, to examine the applicability of the proposed model, several examples are presented and compared with the results in the literature., The third author acknowledges the financial support received via project POTENTIAL (PID2022-141957OB-C21) funded by MCIN/AEI/10.13039/501100011033/FEDER., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Adaptive reduced order modeling to assess peak stresses in heterogeneous arterial sections

  • Gahima, Stephan
  • Stefanati, Marco
  • Rodríguez Matas, José Félix
  • García González, Alberto
  • Díez, Pedro
We introduce an adaptive model reduction approach to compute peak Von Mises stress (pVMS) in heterogeneous arterial sections. The pipeline follows a standard two-phase process: first, we construct the training set of displacement snapshots obtained from the full order model offline, and then we compute pVMS in the online phase. We adaptively enrich the modal representation in critical regions (around the lumen and in calcified areas) using a level-set approach. Optimized for efficient pVMS computation, as a key plaque vulnerability indicator, this technique significantly reduces the computational cost of training machine learning models to classify plaque vulnerability based on pVMS., The authors acknowledge financial support provided by the Ministerio de Ciencia, Innovación y Universidades (MCIN/ AEI/10.13039/501100011033, MICIU/AEI/10.13039/501100011033/ FEDER, UE) through grants PID2022-141957OB-C21, PID2023-153082OB-I00 and CEX2018-000797-S; the Fondazione Regionale per la Ricerca Biomedica (Regione Lombardia), via project ID 3432721; and the Italian Ministry of University and Research (PRIN 2022, grant 2022ZKEP8S). The authors acknowledge Zhongzhao Teng of the University of Cambridge for providing the realistic 2D geometries used in this work. Funding Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature., Peer Reviewed, Postprint (published version)