Pasar al contenido principal

TECNICAS DE LOCALIZACION Y MONITORIZACION NO INTRUSIVAS PARA AYUDAR A PERSONAS NO COLABORATIVAS CON TRASTORNOS DE SALUD MENTAL A ENVEJECER EN SUS HOGARES

PID2023-146254OB-C43

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2023
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ALCALA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Model-Driven Deep Learning for Massive Access Internet of Things Networks

  • Dang, Xiaobing
  • Xiang, Wei
  • Yuan, Lei
  • Yang, Yuan
  • Cheng, Peng
  • Hernández Alonso, Álvaro|||0000-0001-9308-8133
In the context of massive machine-type communications (mMTC) within the Internet of Things (IoT), joint activity detection and channel estimation (JADCE) is a key challenge in enabling massive access due to sporadic device access patterns. In this work, we consider both single-antenna and multiple-antenna base station scenarios and formulate the JADCE problem using the least absolute shrinkage and selection operator (LASSO) framework. To address this problem, we propose a model-driven network that utilizes compressive sensing (CS) and deep learning techniques. Specifically, we first design a prediction-correction alternating direction method of multipliers (PC-ADMM) as the underlying algorithm of the model-driven network. Then, the network is developed based on the PC-ADMM and is designed to be complex-valued. Furthermore, we also model the proximal operator, typically used to generate sparse solutions in LASSO, as a channel attention module within the model-driven network to enhance robustness. Numerical results show that the proposed PC-ADMM framework outperforms existing LASSO-based methods in terms of channel estimation and device activity detection., Agencia Estatal de Investigación, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

An encoder-decoder LSTM network for load forecasting in building power systems

  • Mari, Simone
  • Donato, Patricio
  • Hernández Alonso, Álvaro|||0000-0001-9308-8133
  • Fiorucci, Edouardo
2025 IEEE International Instrumentation and Measurement Technology Conference (I2MTC), 19-22 May 2025, Chemnitz, Germany., Intelligent energy management systems have become a trending topic in the last decade, due to those challenges associated to climate change or energy shortages, among others. Efficient energy management and energy demand response are often related to the availability of accurate prediction models that may provide the expected energy consumption for a household or building early enough. For that purpose, deep learning and deep neural networks are already a suitable approach to deal with large datasets from a building energy consumption, thus making it feasible the definition and training of data-driven models. In this context, this work describes a novel encoder-decoder network based on LSTM (Long Short-Term Memory) layers that is capable of forecasting the weekly energy consumption of a public building, starting from the actual energy values from the previous week as well as from the information about the work days in that week. The proposal has been successfully validated in the School of Engineering from the National University of Mar Del Plata (Argentina), achieving a mean absolute error of 2.68 kW in the prediction of the active power of the building during a test period of eleven weeks., Agencia Estatal de Investigación
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

6-DoF optical positioning system with RSS-AoA measurements and Harmony Search refinement

  • Aparicio Esteve, Elena|||0000-0001-7886-312X
  • Moltó Orozco, David|||0000-0002-2790-3758
  • Hernández Alonso, Álvaro|||0000-0001-9308-8133
  • Ureña Ureña, Jesús|||0000-0003-1408-6039
IPIN-WCAL 2025 Indoor Positioning and Indoor Navigation - Workshop for Computing & Advanced Localization 2025, at the 15th International Conference on Indoor Positioning and Indoor Navigation (IPIN 2025), Tampere, Finland, September 15 - 18, 2025., Indoor localization is an ever-growing area of research, driven by applications such as autonomous robot navigation, cultural and commercial venue guidance, logistics, emergency response, and health monitoring of older adults. This paper presents a two-stage hybrid method for the full six degrees-of-freedom (6-DoF) pose estimation in optical indoor localization systems using a quadrant photodiode (QP) sensor. First, a geometric Angle-of-Arrival (AoA) algorithm estimates the receiver’s 3D position and yaw rotation using normalized energy ratios. Then, a Harmony Search (HS) algorithm refines this partial estimation to full 6-DoF by estimating the roll and pitch angles, while simultaneously refining all pose parameters through reprojection error minimization. The method is validated through simulations over a 2 × 2 × 1 m³ volume. Results show that the proposed approach significantly outperforms the AoA-only baseline. In scenarios with different orientations, the 90-th percentile position error drops from 0.61 m to 0.38 m in the x and y coordinates, and from 0.24 m to 0.20 m in the z one. Orientation errors in roll, pitch, and yaw are below 6.56°, 6.48°, and 1.03°, respectively., Agencia Estatal de Investigación
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Ultrasonic Device-Free Localization System Using Orthogonal Chirp-Based Multistatic Sonar

  • García Requejo, Alejandro|||0000-0002-4955-8852
  • Pérez Rubio, María del Carmen|||0000-0001-8271-6843
  • Hernández Alonso, Álvaro|||0000-0001-9308-8133
  • Wright, William M. D.
This work was supported in part by MCIN/AEI/10.13039/501100011033 and EU “NextGenerationEU”/PRTR (ref. TED2021-131773B-I00), Indoor device-free localization (DFL) systems offer an alternative paradigm to traditional location, in which the target to be located does not need to carry any sensor, tag, or electronic device. In contrast to most popular DFL systems, which are based on radio frequency technologies, ultrasonic signals have been used in this work, due to their good accuracy results, to estimate the 3-D position of a person's head. For this purpose, a four-emitter and a single-receiver multistatic sonar installed overhead has been employed. The emission signals follow a time division orthogonal chirp division multiplexing (TD-OCDM) access technique to obtain a 300 ms update time and asynchronous operation. The signals propagated in the indoor space are acquired by the receiver and processed. A sign-data least mean square (SD-LMS) adaptive filter algorithm has been applied in order to remove the background components on the received signal. Then, a specific window from the resulting clean signal is employed to determine the reflected signal at the target time-of-arrival (ToA) by using an adaptive threshold. The ToA obtained, together with the direct path ToA between emitters and the receiver, provide ranges to compute the target location using a localization algorithm. A simulator was used to analyze the proposal, estimating the coverage area of the system at 3.14 m(2). Several experiments have been performed with a single user placing the multistatic sonar at heights of 2.60 and 2.80 m above the floor within the coverage area. The results achieved positioning errors lower than 9 cm for the 2.60-m height and 11.6 cm at 2.80 m in 90% of the cases., Agencia Estatal de Investigación
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

HIFDA - High-Frequency Electrical Voltage and Current Signals from Household Appliances

  • Navarro Pérez, Víctor Manuel
  • Barragán Frías, Marta
  • Nieto Capuchino, Rubén|||0000-0002-8293-9665
  • Ureña Ureña, Jesús|||0000-0003-1408-6039
  • Hernández Alonso, Álvaro|||0000-0001-9308-8133
This work was supported in part by MCIN/AEI/10.13039/501100011033 and EU “NextGenerationEU”/PRTR (ref. TED2021-131773B-I00), The increasing demand for efficient energy management in smart grids has led to the development of various Non-Intrusive Load Monitoring (NILM) techniques. These aim to disaggregate energy consumption and classify appliances using data from a single-point smart meter at a household's grid mains. With the use of machine learning methods, NILM solutions increasingly rely on datasets for training and validation. While datasets like WHITED, BLOND, and UK-DALE provide insights into consumption patterns, they face limitations such as lack of steady-state data, complicated ground-truth or low sampling rates, which hinder detecting low-power appliances. High sampling rates, however, improve classification accuracy and enable identifying these devices. This study introduces the HIgh Frequency household electrical signals DAtaset (HIFDA), a high-frequency dataset capturing steady-state signals from 14 household appliances at 100 kSPS, including the empty grid. Data, collected via a custom System-on-Chip (SoC) device, focuses on active consumption and includes multiple time windows. HIFDA, hosted on Zenodo, ensures its suitability for modern NILM research and other applications., Agencia Estatal de Investigación