Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 20
Encontrada(s) 1 página(s)

e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Evaluation of Spread-Spectrum Sequences in Ultrasonic Sonar for Indoor People Localization

  • García Requejo, Alejandro|||0000-0002-4955-8852
  • Pérez Rubio, María del Carmen|||0000-0001-8271-6843
  • Hernández Alonso, Álvaro|||0000-0001-9308-8133
  • Wright, William M. D.
  • Murano, Santiago Emmanuel Francis
2024 IEEE International Symposium on Medical Measurements and Applications (MeMeA), 26-28 June 2024, Eindhoven, Netherlands., Device-free localization (DFL) systems enable non-intrusive indoor human location without the need to wear a sensor or tag. This can be particularly helpful in healthcare and assisted living applications based on monitoring vulnerable people to improve their quality of life in their own home. For this purpose, this work presents a DFL system based on an ultrasonic asynchronous multistatic sonar, installed on the ceiling, consisting of four transmitters and a receiver that estimates the 3D position of a person's head. The emitted signals propagated through the indoor space are acquired by the receiver, which processes them by means of different proposed methods to estimate the position. Each transmitter emits spread-spectrum signal pulses with good cross-correlation properties, providing an update time of 300 ms and asynchronous operation. Kasami, Zadoff-Chu and orthogonal chirp emission sequences are analyzed by simulation and experimental results. Hence, it can be determined that Zadoff-Chu and chirp stand out due to their performance in terms of Doppler tolerance and accuracy, reaching mean absolute errors of 4.5 cm and 3.5 cm with standard deviations of 0.6 cm and 2 cm, respectively. On the other hand, Zadoff-Chu offers better correlation properties, while chirp provides higher data availability due to its better transducer adaptation., Agencia Estatal de Investigación, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Preliminary Unknown Appliance Detection using Convolutional Variational Auto-Encoders for AAL

  • Diego Otón, Laura De|||0000-0002-4939-2987
  • Fuentes Jiménez, David|||0000-0001-6424-4782
  • Pizarro Pérez, Daniel|||0000-0003-0622-4884
  • Hernández Alonso, Álvaro|||0000-0001-9308-8133
  • Mari, Simone
  • Nieto Capuchino, Rubén|||0000-0002-8293-9665
2024 IEEE International Conference on Omni-layer Intelligent Systems (COINS), 29-31 July 2024, London, United Kingdom., The healthcare landscape is evolving, emphasising the importance of Active Assisted Living in addressing challenges presented by the ageing population. Integrating Non-Intrusive Load Monitoring provides insights into individual appliance usage patterns without additional sensors, enabling the detection of changes in daily activities that may reflect a person's health status. Within the effectiveness of this approach, adaptability is crucial as households evolve, discerning variations in energy consumption patterns caused by new or replaced electrical devices. For this reason, this work introduces a sophisticated hybrid approach combining deep learning and classic machine learning to classify household electrical loads and detect unknown loads using high-frequency electrical current signal data. Finally, while experimental results highlight areas for improvement, the findings suggest promising applications in household settings, marking a step forward in facing hurdles within the AAL context., Agencia Estatal de investigación, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Combined infrared-ultrasonic positioning system to improve the data availability

  • Aparicio Esteve, Elena|||0000-0001-7886-312X
  • Ureña Ureña, Jesús|||0000-0003-1408-6039
  • Hernández Alonso, Álvaro|||0000-0001-9308-8133
  • Villadangos Carrizo, José Manuel|||0000-0001-5900-0978
This work was supported in part by MCIN/AEI/10.13039/501100011033 and EU “NextGenerationEU”/PRTR (ref. TED2021-131773B-I00) Proyectos, Many indoor positioning applications related to accurate monitoring and tracking targets require centimeter precision. Infrared (IR)- and ultrasound (US)-based systems represent a feasible approach providing high robustness against interference. Furthermore, their combination may achieve better performance by mitigating their complementary drawbacks, covering larger areas, and improving the availability of positioning measurements. In this context, this work presents the proposal and experimental evaluation of a tightly coupled fusion method that uses an extended Kalman filter (EKF) to merge an IR- and a US-based positioning system. An outlier detection method is considered to select measurements with an adequate performance. Experimental results reveal that the IR and US systems are unable to position in 4.08% and 26.06% of locations, whereas the combined IR -US system has 100% of availability. In addition, the merged solution achieves less than 4 cm of positioning error in 90% of cases, outperforming the IR and US systems when they work independently., Agencia Estatal de Investigación, Universidad de Alcalá, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Definition of a FPGA-based SoC architecture for PRBS transmission in optical spectroscopy

  • Tapiador Luque, Miguel
  • Escobar Vera, Camilo José
  • Soriano Amat, Miguel|||0000-0002-4819-3898
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Hernández Alonso, Álvaro|||0000-0001-9308-8133
  • Fernández Ruiz, María del Rosario|||0000-0003-3561-2405
Optical spectroscopy is a well-known tool typically employed for characterizing the properties of materials by analyzing their iteration with light. One of the most spread techniques is the dual comb spectroscopy, since it accomplishes ultra-high resolution, and high sensitivity measurements with a relatively simple platform including a single, relatively narrowband photodetector. The employed optical dual comb can be implemented through electro-optical (EO) modulation driven by pseudo-ransom binary sequences (PRBS) at high data rates, commonly in the range of tens of Gbps. For that purpose, the runtime generation and transmission of adaptive PRBS is still an open challenge, often involving expensive and not flexible high-speed digital systems, with a few commercially available solutions that sometimes do not match the application requirements efficiently. In this context, this work describes the definition and implementation of a System-on-Chip (SoC) architecture, based on a FPGA device, capable of generating and transmitting two PRBS for a dual comb, at a data rate up to 5 Gbps. The architecture can be configured and its operation modified in run time, thanks to the general-purpose processor involved, in charge of managing an Ethernet link to receive new PRBS to be transmitted or set up certain parameters. The proposed design has been validated experimentally on a dual comb spectroscopy measurement, where the absorption of a hydrogen cyanide (HCN) gas cell has been successfully characterized., Agencia Estatal de Investigación, Ministerio de Ciencia e Innovación
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Model-Driven Deep Learning for Massive Access Internet of Things Networks

  • Dang, Xiaobing
  • Xiang, Wei
  • Yuan, Lei
  • Yang, Yuan
  • Cheng, Peng
  • Hernández Alonso, Álvaro|||0000-0001-9308-8133
In the context of massive machine-type communications (mMTC) within the Internet of Things (IoT), joint activity detection and channel estimation (JADCE) is a key challenge in enabling massive access due to sporadic device access patterns. In this work, we consider both single-antenna and multiple-antenna base station scenarios and formulate the JADCE problem using the least absolute shrinkage and selection operator (LASSO) framework. To address this problem, we propose a model-driven network that utilizes compressive sensing (CS) and deep learning techniques. Specifically, we first design a prediction-correction alternating direction method of multipliers (PC-ADMM) as the underlying algorithm of the model-driven network. Then, the network is developed based on the PC-ADMM and is designed to be complex-valued. Furthermore, we also model the proximal operator, typically used to generate sparse solutions in LASSO, as a channel attention module within the model-driven network to enhance robustness. Numerical results show that the proposed PC-ADMM framework outperforms existing LASSO-based methods in terms of channel estimation and device activity detection., Agencia Estatal de Investigación, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Activity monitoring and location sensory system for people with mild cognitive impairments

  • García Requejo, Alejandro|||0000-0002-4955-8852
  • Pérez Rubio, María del Carmen|||0000-0001-8271-6843
  • Villadangos Carrizo, José Manuel|||0000-0001-5900-0978
  • Hernández Alonso, Álvaro|||0000-0001-9308-8133
Cognitive impairment diseases are becoming more and more prevalent mainly due to population ageing and the increase in life expectancy. Sensory and monitoring systems may allow people with mild cognitive impairments (MCI) or at early stages of dementia to live at home for longer with more independence and security. This work presents a Wireless Sensor Network (WSN) based on wearables that obtains indoor and outdoor location and step information, reporting them over a LoRaWAN network. Each Wireless Wearable Sensor (WWS) uses a Global Navigation Satellite System module for outdoor positioning, a proposed indoor roomlevel localization system based on infrared sensors, an accelerometer for a step detector algorithm, and a LoRa (Long-Range) radio link to send the measured information with low power consumption achieving a large coverage range. These sensory data are recorded in a database and presented to the medical services and caregivers through a user web application. This can be used to detect anomalous changes in daily patients? routines, as well as to know the user?s position in cases where the patient may be disoriented. In addition, alerts are launched in caregivers? smartphones to report about any risky situation, such as the patient leaving an allowed area or staying in one place for too long. Therefore, the proposed sensory system may support and extend the ability of people with MCI or at early stages of dementia to live independently, it helps detect behavioural changes and it keeps caregivers? peace of mind., European Commission, Agencia Estatal de Investigación, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Libro o Monografía (Book)

Estimating energy consumption in households for non-intrusive elderly monitoring

  • Hernández Alonso, Álvaro|||0000-0001-9308-8133
  • Diego Otón, Laura De|||0000-0002-4939-2987
  • Pizarro Pérez, Daniel|||0000-0003-0622-4884
  • Pérez Rubio, María Del Carmen|||0000-0001-8271-6843
  • Villadangos Carrizo, José Manuel|||0000-0001-5900-0978
  • Nieto Capuchino, Rubén|||0000-0002-8293-9665
2023 IEEE International Workshop on Metrology for Living Environment (MetroLivEnv), 29-31 May 2023, Milano, Italy., Population ageing is becoming a key social issue in recent decades, particularly in Western countries, where this fact, together with the increase of life expectancy, has posed a significant strain on public finances and health services. In this context, many technological developments are often proposed to promote and support the independent living of elderly at their own homes, thus avoiding or postponing possible entries into social residences. Among them, smart meters provide a nonintrusive way to monitor and estimate the tenants" daily activities, by only using a single-point measurement in the mains at the entrance of the household. This work describes a regression approach to estimate the energy consumption of a house by means of a LSTM neural network. For that purpose, a pilot has been run on a house during six months in order to collect the electrical data, which will be used later to train the neural network. After that training, the network tries to estimate the energy consumption every 15 minutes, so any deviation between the predicted sample and the measured one might be used to detect anomalies in the daily routine of the tenant., Agencia Estatal de Investigación, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

An encoder-decoder LSTM network for load forecasting in building power systems

  • Mari, Simone
  • Donato, Patricio
  • Hernández Alonso, Álvaro|||0000-0001-9308-8133
  • Fiorucci, Edouardo
2025 IEEE International Instrumentation and Measurement Technology Conference (I2MTC), 19-22 May 2025, Chemnitz, Germany., Intelligent energy management systems have become a trending topic in the last decade, due to those challenges associated to climate change or energy shortages, among others. Efficient energy management and energy demand response are often related to the availability of accurate prediction models that may provide the expected energy consumption for a household or building early enough. For that purpose, deep learning and deep neural networks are already a suitable approach to deal with large datasets from a building energy consumption, thus making it feasible the definition and training of data-driven models. In this context, this work describes a novel encoder-decoder network based on LSTM (Long Short-Term Memory) layers that is capable of forecasting the weekly energy consumption of a public building, starting from the actual energy values from the previous week as well as from the information about the work days in that week. The proposal has been successfully validated in the School of Engineering from the National University of Mar Del Plata (Argentina), achieving a mean absolute error of 2.68 kW in the prediction of the active power of the building during a test period of eleven weeks., Agencia Estatal de Investigación
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Libro o Monografía (Book)

Comparative analysis of neural network implementations for NILM applications

  • Martín Catalán, Jorge
  • Diego Otón, Laura De|||0000-0002-4939-2987
  • Tapiador Luque, Miguel
  • Hernández Alonso, Álvaro|||0000-0001-9308-8133
  • Nieto Capuchino, Rubén|||0000-0002-8293-9665
2023 38th Conference on Design of Circuits and Integrated Systems (DCIS), 15-17 November 2023, Málaga, Spain., Non-Intrusive Load Monitoring (NILM) comprises a set of techniques that try to disaggregate the energy consumption in a household or building, based on the measurements coming from a single-point smart meter. In this process, a key step is the load identification of the different appliances that may switched on/off during a certain interval under analysis. For that purpose, machine-learning techniques, including deep neural networks, have recently been involved. These classification algorithms may often imply a high computational cost, that might compromise a possible edge-computing implementation on the local smart meters. In this context, this work presents a preliminary comparison between two different real-time implementations of both neural networks, a dense one and a convolutional one, applied to load classification. The implementations are based on a FPGA approach and on a processor. In general terms, preliminary results show that the FPGA solution provides lower latencies than the processor one, at the expense of requiring a higher design effort and a quantization error coming from the fixed-point representation., Agencia Estatal de Investigación
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

SoC Architecture for High-Frequency Acquisition of Household Electric Signals

  • Navarro Pérez, Víctor Manuel
  • Diego Otón, Laura de|||0000-0002-4939-2987
  • Nieto Capuchino, Rubén|||0000-0002-8293-9665
  • Tapiador Luque, Miguel
  • Ureña Ureña, Jesús|||0000-0003-1408-6039
  • Hernández Alonso, Álvaro|||0000-0001-9308-8133
2024 IEEE International Instrumentation and Measurement Technology Conference (I2MTC 2024), 20-23 May 2024, Glasgow, United Kingdom., Accurate monitoring of current and voltage in residential power grids is crucial for effective energy manage-ment and the implementation of smart technologies for non-intrusive monitoring of persons, especially those with cognitive or physical impairments. The emergence of high-speed analog-digital converters (ADCs) and wireless Internet-of-Things (IoT) devices has significantly improved measurement rates and realtime data collection capabilities, but the acquisition rates for the correct recognition of some devices in a non-intrusive load monitoring (NILM) aplication might still be insufficient. In order to address this issue, this work describes a System-on-Chip (SoC) architecture based on a Field-Programmable Gate Array (FPGA) and a dedicated analog conditioning circuit for household elec-tric signal acquisition. The architecture simultaneously captures voltage with a bandwidth ranging from 500 Hz to 100 kHz; and current signals from 300 Hz to 100 kHz. It is based on a Zybo z7-10 development platform along with an AD7476A ADC and a conditioning circuit, which consist of a filtering stage, an isolation transformer and a voltage-level adapter. The system is adequate for realtime household electric signal acquisition and processing, being able to capture high frequency harmonics correctly, while enabling the possible implementation of further processing, such as the integration of artificial neural networks and/or machine learning algorithms for event classification, load identification, and the implementation of an alarm system for behaviour anomalies., Agencia Estatal de Investigación
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Libro o Monografía (Book)

Centralized optical 3D positioning system for emitting tags

  • Aparicio Esteve, Elena|||0000-0001-7886-312X
  • Ureña Ureña, Jesús|||0000-0003-1408-6039
  • Hernández Alonso, Álvaro|||0000-0001-9308-8133
  • Moltó Orozco, David|||0000-0002-2790-3758
  • Villadangos Carrizo, José Manuel|||0000-0001-5900-0978
  • Cubero Vacas, Miguel
13th International Conference on Indoor Positioning and Indoor Navigation (IPIN2023), 25-28 September 2023, Nuremberg, Germany., The demand for accurate and reliable local positioning systems has grown rapidly with the increasing use of Location-Based Services (LBS). Emerging technologies such as optical, RF, acoustic, mechanical, and magnetic are feasible options for indoor positioning. Optical-based systems have gained attention due to the widespread LED lamp availability and centimeter-level accuracy. In this context, this work presents the implementation and validation of a centralized optical Local Positioning System (LPS) based on a set of mobile emitter LEDs and a minimum of two fixed receivers, enabling simultaneous position of all tags in the infrastructure (centralized approach). The system is designed for long-distance measurements, using Visible or Infrared Light signals. By incorporating geometric considerations into a Non-Linear Least Squares Estimator (NLSE), the system can estimate the 3D position of a mobile object (i.e. person, drone). The comparison of different deployments demonstrates that the proposed system estimates the 3D position with less than 4mm of error in 90% of cases when using four non-aligned receivers and a single LED., Agencia Estatal de Investigación, Universidad de Alcalá, Junta de Comunidades de Castilla-La Mancha, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Conditioning stage of a QADA receiver for a large range IR positioning system

  • Ureña Ureña, Jesús|||0000-0003-1408-6039
  • Villadangos Carrizo, José Manuel|||0000-0001-5900-0978
  • Hernández Alonso, Álvaro|||0000-0001-9308-8133
  • Moltó Orozco, David|||0000-0002-2790-3758
  • Aparicio Esteve, Elena|||0000-0001-7886-312X
  • García García, Juan Carlos|||0000-0002-9367-9475
2024 IEEE International Instrumentation and Measurement Technology Conference (I2MTC 2024), 20-23 May 2024, Glasgow, United Kingdom., Optical positioning systems in the infrared or visible spectrum find application in the tracking of people or mobile vehicles in indoor spaces. A line of research proposes the use of LED emitters, acting as tags to be positioned, and quadrant receivers (QADA, Quadrant Photodiode Angular Diversity Aperture) located at known positions in the infrastructure. These systems can operate at a measurement rate that can reach some MHz at relatively low cost. Apart from the challenge of high-speed processing, they must also deal with low and changing signal-to-noise ratios (measurements at short and long distances, with different transmitter-receiver angle of view, etc.). This paper deals with the design of the analog conditioning stage of a QADA receiver taking into account that it must operate in a linear area with large dynamic signal margins and provide three outputs, one sum signal and two differential signals, that must be amplified with identical gain, as the performance of the triangulation algorithms used in positioning depends on this. Each signal has a transimpedance amplifier with continuous and low-frequency backlight cancellation. Furthermore, an automatic gain control with a large dynamic range is applied to the sum signal and the gain derived over time is used to manage two variable gain amplifiers for the other two differential signals. Some results are presented that show the performance of the system., Universidad de Alcalá, Agencia Estatal de Investigación, Junta de Comunidades de Castilla-La Mancha
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Libro o Monografía (Book)

Implementing a CNN in FPGA programmable logic for NILM application

  • Tapiador Luque, Miguel
  • Diego Otón, Laura De|||0000-0002-4939-2987
  • Hernández Alonso, Álvaro|||0000-0001-9308-8133
  • Nieto Capuchino, Rubén|||0000-0002-8293-9665
2023 38th Conference on Design of Circuits and Integrated Systems (DCIS), 15-17 November 2023, Málaga, Spain., Non-Intrusive Load Monitoring (NILM) techniques are gaining popularity in the field of energy savings. Generally implemented through the use of smart meters, the main challenge with these devices is that they operate at very low sampling rates. To address this issue, FPGA-based systems have been proposed to capture instantaneous currents and voltages at higher sampling frequencies in the kHz range. However, the limitation of these architectures lies in the fact that the acquired windows are often transmitted upstream to the cloud for the application of load classification algorithms based on machine learning, relying on high-bandwidth communications available onsite. This work proposes an alternative approach by implementing the classification algorithms in the same acquisition and processing system, by using custom convolutional neural networks on mid-range FPGA devices. Brevitas and FINN frameworks are used for the quantization-aware training, as well as for the generation of a peripheral that may be integrated into any FPGA-based SoC (System-on-Chip) architecture. The proposed approach allows the whole processing involved in NILM techniques to be integrated into a single embedded system. Preliminary experimental results demonstrate the effectiveness of the proposed approach., Agencia Estatal de Investigación
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Ultrasonic Device-Free Localization System Using Orthogonal Chirp-Based Multistatic Sonar

  • García Requejo, Alejandro|||0000-0002-4955-8852
  • Pérez Rubio, María del Carmen|||0000-0001-8271-6843
  • Hernández Alonso, Álvaro|||0000-0001-9308-8133
  • Wright, William M. D.
This work was supported in part by MCIN/AEI/10.13039/501100011033 and EU “NextGenerationEU”/PRTR (ref. TED2021-131773B-I00), Indoor device-free localization (DFL) systems offer an alternative paradigm to traditional location, in which the target to be located does not need to carry any sensor, tag, or electronic device. In contrast to most popular DFL systems, which are based on radio frequency technologies, ultrasonic signals have been used in this work, due to their good accuracy results, to estimate the 3-D position of a person's head. For this purpose, a four-emitter and a single-receiver multistatic sonar installed overhead has been employed. The emission signals follow a time division orthogonal chirp division multiplexing (TD-OCDM) access technique to obtain a 300 ms update time and asynchronous operation. The signals propagated in the indoor space are acquired by the receiver and processed. A sign-data least mean square (SD-LMS) adaptive filter algorithm has been applied in order to remove the background components on the received signal. Then, a specific window from the resulting clean signal is employed to determine the reflected signal at the target time-of-arrival (ToA) by using an adaptive threshold. The ToA obtained, together with the direct path ToA between emitters and the receiver, provide ranges to compute the target location using a localization algorithm. A simulator was used to analyze the proposal, estimating the coverage area of the system at 3.14 m(2). Several experiments have been performed with a single user placing the multistatic sonar at heights of 2.60 and 2.80 m above the floor within the coverage area. The results achieved positioning errors lower than 9 cm for the 2.60-m height and 11.6 cm at 2.80 m in 90% of the cases., Agencia Estatal de Investigación
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

HIFDA - High-Frequency Electrical Voltage and Current Signals from Household Appliances

  • Navarro Pérez, Víctor Manuel
  • Barragán Frías, Marta
  • Nieto Capuchino, Rubén|||0000-0002-8293-9665
  • Ureña Ureña, Jesús|||0000-0003-1408-6039
  • Hernández Alonso, Álvaro|||0000-0001-9308-8133
This work was supported in part by MCIN/AEI/10.13039/501100011033 and EU “NextGenerationEU”/PRTR (ref. TED2021-131773B-I00), The increasing demand for efficient energy management in smart grids has led to the development of various Non-Intrusive Load Monitoring (NILM) techniques. These aim to disaggregate energy consumption and classify appliances using data from a single-point smart meter at a household's grid mains. With the use of machine learning methods, NILM solutions increasingly rely on datasets for training and validation. While datasets like WHITED, BLOND, and UK-DALE provide insights into consumption patterns, they face limitations such as lack of steady-state data, complicated ground-truth or low sampling rates, which hinder detecting low-power appliances. High sampling rates, however, improve classification accuracy and enable identifying these devices. This study introduces the HIgh Frequency household electrical signals DAtaset (HIFDA), a high-frequency dataset capturing steady-state signals from 14 household appliances at 100 kSPS, including the empty grid. Data, collected via a custom System-on-Chip (SoC) device, focuses on active consumption and includes multiple time windows. HIFDA, hosted on Zenodo, ensures its suitability for modern NILM research and other applications., Agencia Estatal de Investigación
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Appliance Identification in NILM Applications by means of a Convolutional Auto-Encoder

  • Diego Otón, Laura de|||0000-0002-4939-2987
  • Hernández Alonso, Álvaro|||0000-0001-9308-8133
  • Pizarro Pérez, Daniel|||0000-0003-0622-4884
  • Nieto Capuchino, Rubén|||0000-0002-8293-9665
2023 IEEE International Workshop on Metrology for Living Environment (MetroLivEnv), 29-31 May 2023, Milano, Italy., In energy efficiency applications, Non-Intrusive Load Monitoring techniques (NILM) are typically used to deduce which electrical loads are being used in a building at a given time. The identification of household appliances, in particular manually operated ones, is relevant information that can also be applied to infer the routines of tenants in Active and Assisted Living environments (AAL). These tools and applications are becoming increasingly interesting, especially in Western countries, where the ageing population is putting a strain on public social and health services. In this context, this work aims to classify the on/off events of the devices considered in the BLUED database. For this purpose, an architecture is presented, consisting of a Convolutional Auto-Encoder (CAE) followed by a classifier neural network. The CAE is used to implement a dimensionality reduction process after the encoder. Input data are formatted as images, created with extracted sections of the high-frequency electric current signal captured around the switching events. It is noteworthy that this dimensionality reduction also allows a decrease in the computational load of the classifier. Regarding the CAE functionality, the reconstruction error reaches a value of 1.579 · 10−3, whereas in the validation stage a weighted average classification F1-score of 87 % is obtained for the whole architecture., Agencia Estatal de Investigación, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

An Open-Source VLBI Digital Backend for Low-Cost FPGA-based SoCs

  • Cubero Vacas, Miguel
  • Hernández Alonso, Álvaro|||0000-0001-9308-8133
  • González, Javier
DCIS2024: 39th Conference on Design of Circuits and Integrated Systems. Catania, Italy, November 13-15, 2024., Very Long Baseline Interferometry (VLBI) techniques have become crucial in radio astronomy and geodesy due to the major improvements that they provide to the observations, outcomes, at the expense of requiring a significant computational load to implement the corresponding processing in real time. The devices responsible for these digital signal processing tasks in the application field, mainly based on Field-Programmable Gate Arrays (FPGAs), are known as Digital Backends. Currently, the costs coming from the state-of-the-art digital backends are high and their FPGA designs either require expensive software licenses to be involved, or they are released as proprietary solutions. This work proposes a novel SoC (System-on-Chip) architecture, based on a Xilinx Zynq device, for a digital backend focused on VLBI applications. The architecture is capable of managing the acquisition stage at the required data rates, and packing data in the well-known VDIF format to upload them. By offering a low-cost open-source architecture, it becomes a suitable solution for dissemination purposes, as well as for specific research fields. Furthermore, the system has been successfully validated with its implementation and test in some preliminary experimental setups., Agencia Estatal de Investigación
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Libro o Monografía (Book)

High-rate acquisition system for an infrared LPS

  • Cubero Vacas, Miguel
  • Moltó Orozco, David|||0000-0002-2790-3758
  • Aparicio Esteve, Elena|||0000-0001-7886-312X
  • Hernández Alonso, Álvaro|||0000-0001-9308-8133
  • Villadangos Carrizo, José Manuel|||0000-0001-5900-0978
  • Ureña Ureña, Jesús|||0000-0003-1408-6039
2023 38th Conference on Design of Circuits and Integrated Systems (DCIS), 15-17 November 2023, Málaga, Spain., In the last years, the demand for positioning systems based on visible light, infrared light or, in general, optical signals has increased considerably due to their high accuracy and low cost compared to positioning systems based on other technologies, as well as their ease of integration due to their wide presence in domestic and industrial environments. The main constraint of these solutions is that the high speed of light makes the acquisition process complex. This work proposes a complete acquisition architecture for the twelve signals coming from four QADA (Quadrature Angular Diversity Aperture) photoreceptors, based on an analog front-end for signal conditioning at the input, an analog-to-digital converter, and a final digital stage using an FPGA for the acquisition of the data coming from the converter with high data rates up to 16.25 Msps. To verify the system performance, LS (Loosely Synchronized) sequences, often used in positioning systems, are emitted by a LED, and, later, they are acquired and digitally processed successfully by the proposed architecture in some preliminary experimental tests., Agencia Estatal de Investigación, Universidad de Alcalá, Junta de Comunidades de Castilla-La Mancha, European Science Foundation
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

A comparison between autocorrelation- and crosscorrelation-based coarse frame synchronization schemes for OFDM-PLC systems

  • Colombo, Martín Alejandro
  • Ureña Ureña, Jesús|||0000-0003-1408-6039
  • Hernández Alonso, Álvaro|||0000-0001-9308-8133
  • Marziani, Carlos Manuel de
  • Mayosky, Miguel Ángel
Orthogonal frequency division multiplexing (OFDM)-based Power-Line Communications (PLC) systems are vulnerable to synchronization errors, and the particularities of the PLC channel affect the performance of the synchronization process. In this context, this work is focused on the initial pilot symbol detection, presenting a comparison between autocorrelation- (AC) and crosscorrelation (CC)-based timing metrics, which include the most common preamble-based synchronization strategies. Two robust timing metrics are defined and the effect of multipath, Colored Background Noise (CBN) and Impulsive Noise (IN) is theoretically evaluated on each. A detailed analysis of the probability distributions of the timing metrics is performed and primary detection thresholds and lower bounds for the symbol detection probability are derived. Simulations of the OFDM-PLC system are performed in order to validate the analysis, considering a statistic PLC channel model and different noise sources. Results show that the CBN and IN significantly degrade the timing metrics behavior, and that the CC-based timing metric is more robust to this worsening, thus achieving a better synchronization performance than the AC-based timing metric., Agencia Estatal de Investigación
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

A configurable CORDIC and PSADIC fusion architecture for nonlinear edge-computing

  • Xie, M.
  • Yu, Ningmei
  • Tian, Dian
  • Zhang, J.
  • Hernández Alonso, Álvaro|||0000-0001-9308-8133
  • Ureña Ureña, Jesús|||0000-0003-1408-6039
2024 9th International Conference on Integrated Circuits and Microsystems (ICICM), 25-27 October 2024, Wuhan, China., The computation of some crucial and nonlinear functions on the edge has to consider the area and latency. The traditional coordinate rotation digital computer (CORDIC) systems are widely used for these key functions, such as the sine, cosine, or the square root. For the co-calculations of the division and the square root, CORDIC requires more iteration cycles and resources, whereas the power series approximate digital computer (PSADIC) approach can half the iteration cycles. In this context, a configurable CORDIC and PSADIC fusion architecture is proposed here for edge-computing. It integrates five modes of CORDIC and PSADIC to calculate some crucial nonlinear functions. Each mode is simulated and verified on software and hardware, achieving the mean relative error distance (MRED) lower than 10−4. Under the TSMC 40nm process, the area of proposed architecture is increased by 18.3% compared to the PSADIC one, but the five modes, including all the calculations from CORDIC and PSADIC, are implemented., Agencia Estatal de Investigación