Pasar al contenido principal

CARACTERIZACION ELECTROQUIMICA DE ELECTRODOS CERAMICOS Y APLICACION AL DESARROLLO DE BATERIAS DE FLUJO REDOX Y A LA ELIMINACION DE CONTAMINANTES EMERGENTES

PID2023-147511OB-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2023
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Photoelectrochemical Degradation of Pharmaceutical Active Compounds in Multicomponent Solutions with an Sb-Doped SnO2 Ceramic Anode Coated with BiPO4

  • Balseviciute, Adele|||0000-0003-0853-5790
  • García Gabaldón, Montserrat|||0000-0003-4254-6733
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
  • Martí Calatayud, Manuel César|||0000-0002-0745-1918
  • Mestre, Sergio
[EN] A ceramic anode made of Sb-doped SnO2 and coated with a photoactive BiPO4 layer was tested for the (photo)electrochemical oxidation of three commonly used pharmaceuticals: atenolol, ibuprofen, and norfloxacin. Light-pulsed chronoamperometry showed that the photoanode responded immediately to illumination. The application of light and current enhanced degradation for all compounds when treated separately. Ibuprofen and norfloxacin exhibited higher degradation than mineralization, which demonstrates their persistent nature. Electric current was essential to achieve efficient degradation and mineralization, demonstrating the effectiveness of the electrochemical approach. For multicomponent mixtures, applying light resulted in higher mineralization compared to dark conditions at low operation currents (0.2 A). At higher currents (0.4-0.8 A), the contribution of light was partially masked by the enhanced electrochemical production of hydroxyl radicals. The analysis of individual compounds within the mixture revealed significant improvements in degradation under light exposure. Overall, these results demonstrate the potential of the Sb-doped SnO2 ceramic photoanode as a cost-effective and promising alternative to commercial materials for treating pharmaceutical contaminants., The authors are greatly thankful to the Agencia Estatal de Investigacion for the financial support through the grant (PID2023-147511OB-C21), funded by MICIU/AEI/10.13039/501100011033 and by ERDF/EU.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Deep Learning algorithm, based on convolutional neural networks, for equivalent electrical circuit recommendation for Electrochemical Impedance Spectroscopy

  • Sáez-Pardo, Fermín|||0009-0000-0759-6781
  • Giner-Sanz, Juan José|||0000-0003-0441-6102
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
[EN] Electrochemical Impedance Spectroscopy (EIS) is a technique widely used in the field of electrochemistry, due to its ability to probe the dynamics of electrochemical systems. Commonly, EIS spectra are analysed using Equivalent Electrical Circuits (EECs). The EEC selection is not trivial. For this reason, Digby D. Macdonald proposed the Electrochemical Genome Project, which would consist of a large database of EIS spectra and an Artificial Intelligence able to recommend EECs given an experimental EIS spectrum. In this work, we developed a Deep Learning algorithm, based on Convolutional Neural Networks (CNNs), for EEC recommendation for EIS spectra. To achieve this, we optimized the CNN in 3 sequential stages: first, the convolutional architecture was optimized; then, the Initial Learn Rate was selected; and finally, the dense network architecture was optimized. At the end of this process, we obtained a CNN model with a maximum test accuracy of 61.11 %. The obtained results show that CNNs are good candidates for EEC recommendation tools for EIS spectra., This work was funded by an "Ayuda a Primeros Proyectos de Investigacion" project (PAID-06-23) of the research vice-rectorate of Universitat Politecnica de Valencia and the Grant PID2023-147511OB-C21 funded by MICIU/AEI/10.13039/501100011033 and by ERDF/EU. F.S.P. acknowledges the support of Universitat Politecnica de Valencia through a predoctoral fellowship (PAID-01-22) . J.J.G.S. is very grateful to the Ministerio de Ciencia e Innovacion, to the Next Generation EU, and to the Agencia Estatal de Investigacion, for their support by a Juan de la Cierva-Incorporacion fellowship (IJC2020-044087-I) funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR. Authors thank Universitat Politecnica de Valencia for funding for open access charge (PAID-12-25) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Statistical benchmarking of chloride and sulphate posolytes for all-iron redox flow batteries

  • Cifre-Herrando, Mireia|||0000-0002-8800-3585
  • C. Escoms-Espert
  • Sáez-Pardo, Fermín|||0009-0000-0759-6781
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
  • Giner-Sanz, Juan José|||0000-0003-0441-6102
[EN] All-iron Redox Flow Batteries (AIRFBs) are promising large-scale energy storage systems due to their low cost and chemical symmetry. However, their performance is largely limited by the slow kinetics of the Fe3+|Fe2+ redox couple in the posolyte, and the posolyte's stability window. A good electrolyte for AIRFBs must combine fast and reversible charge-transfer kinetics, high selectivity toward the Fe3+|Fe2+ reaction, high ionic conductivity, and efficient mass transport. This study systematically investigates how the electrolyte type (chloride and sulphate) and acidity affect the key electrochemical parameters of the Fe3+|Fe2+ redox couple, namely the standard heterogenous rate constant (¿0), the charge transfer coefficient (¿), the diffusion coefficient (¿), and the conductivity (¿). A multifactorial experimental design was employed, and an ANalysis Of VAriance (ANOVA) was used to identify the statistically significant effects of both factors and their interaction on the aforementioned electrochemical parameters. The ANOVA results show a statistically significant difference in the charge-transfer process between chloride- and sulphate-based electrolytes: the electrolyte type primarily controls electron-transfer kinetics, with chloride medium markedly enhancing ¿0; while acid concentration mainly affects ¿ and ¿. Among the tested formulations, 1 M HCl exhibited the best compromise between Fe3+|Fe2+ kinetics, mass transport, and an adequate stability window. These insights provide a quantitative basis for electrolyte optimization and support the rational design of improved AIRFB posolytes., This work was funded by an Ayuda a Primeros Proyectos de Investigacion project (PAID-06 23) of the research vice-rectorate of Universitat Politecnica de Valencia and the Grant PID2023-147511OBC21 funded by MICIU/AEI/10.13039/ 501100011033 997 and by ERDF/EU. M.C.H is grateful to UPV for the post-doctoral grant (PAID10 24). F.S.P. acknowledges the support of Universitat Politecnica de Valencia through a predoctoral fellowship (PAID-01 22). J.J.G.S. is very grateful to the Ministerio de Ciencia e Innovacion, to the Next Generation EU, and to the Agencia Estatal de Investigacion, for their support by a Juan de la Cierva-Incorporacion fellowship (IJC2020-044087-I) funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR. The Article Processing Charges (APCs) were covered by the transformative agreements between CRUE Universitat Politecnica de Valencia and Elsevier.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Degradation of multicomponent pharmaceutical mixtures by electrochemical oxidation: Insights about the process evolution at varying applied currents and concentrations of organics and supporting electrolyte

  • Balseviciute, Adele|||0000-0003-0853-5790
  • Giner-Sanz, Juan José|||0000-0003-0441-6102
  • García Gabaldón, Montserrat|||0000-0003-4254-6733
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
  • Martí Calatayud, Manuel César|||0000-0002-0745-1918
  • Patiño-Cantero, I.
  • Carrillo-Abad, J.
[EN] Electrochemical oxidation is a treatment process that can achieve high degrees of removal of organic emerging pollutants from wastewater. The present study evaluates the removal and mineralization degrees achieved when treating by electrochemical oxidation multicomponent mixtures containing three model pharmaceuticals: atenolol, ibuprofen and norfloxacin. The progress of the removal process at different applied currents was followed through the evolution of the degree of mineralization and the concentration of ionic by-products. The three compounds can be effectively removed, although atenolol was found to be the most recalcitrant one. An increase in the degree of mineralization with current was noted for currents above 200 mA, reaching a maximum value of 98.8 % for an operation current of 800 mA. In general, total organic carbon declines linearly during the first stages of the process, while an exponential trend appears at the latter stages when complete mineralization is approached. Peak concentrations of some by-products, such as formate, ammonia and nitrite ions, were detected at intermediate operating times. Such compounds are further oxidized, thus being depleted from the solution towards the end of the process. On the contrary, a final plateau concentration is reached for fluoride and nitrate ions. Such events occur faster at higher operation currents, thus denoting an accelerated process of mineralization. However, higher currents also induce a decrease in the mineralization current efficiency and an increase in the specific energy consumption. Notably, for a given current, the process evolves at a similar pace regardless of the concentration of organics and supporting electrolyte. In terms of net mineralization, this implies a more efficient utilization of the generated hydroxyl radicals in the removal of organics for higher solution concentrations. Experiments conducted at constant current and organics concentration, but varying the concentration of sodium sulfate, confirmed that hydroxyl radicals are the main species responsible for the removal of pharmaceuticals, whereas the oxidation of the supporting electrolyte only plays a secondary role., The authors thank Conselleria d'Innovacio, Universitats, Ciencia i Societat Digital (project reference: CIGE/2021/173) and the Agencia Estatal de Investigacion for the financial support through the grant (PID2023-147511OB-C21) funded by MICIU/AEI/10.13039/501100011033 and by ERDF/EU. J.J.G.S. is very grateful to the Ministerio de Ciencia e Innovacion, to the Next Generation EU, and the Agencia Estatal de Investigacion for their support by a Juan de la Cierva- Incorporacion fellowship (IJC2020-044087-I) funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR. Funding for open access charge: Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electrochemical and photoelectrochemical oxidation processes for polystyrene microplastic treatment: BDD anode vs Sb-doped SnO2 ceramic anode coated with a CdFe2O4 photocatalytic layer

  • Medina-Casas, Martha Patricia|||0000-0003-4503-432X
  • Montañés, Maria-Teresa|||0000-0002-2620-6926
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
  • García Gabaldón, Montserrat|||0000-0003-4254-6733
  • García Martín, Gema
  • Mestre, Sergio
[EN] This study evaluates the efficiency of electrochemical and photoelectrochemical oxidation for the degradation of polystyrene (PS) microspheres using two types of anode materials: a commercial boron-doped diamond (BDD) anode and a ceramic tin oxide anode doped with antimony coated with a photoactive cadmium ferrite (CdFe2O4) layer. Experiments were conducted under different current intensities and illumination conditions to assess degradation efficiency. Both electrodes achieved significant PS removal, reaching up to 99¿% with the BDD anode and up to 96¿% with the cadmium ferrite anode under light exposure and 6¿h of treatment. The photoelectrochemical effect was evident in the cadmium ferrite system due to the photogeneration of additional oxidizing species under visible light. Kinetic parameters were calculated using nonlinear regression according to a modified Chamas model with a Monod-type saturation term. Mineralization was confirmed through total organic carbon analysis, and morphological changes were evidenced by scanning electron microscopy and Raman spectroscopy. The specific energy consumption (SEC) analysis revealed that, although the BDD anode exhibited higher efficiency at low applied current intensities, the cadmium ferrite anode represents a viable alternative due to its high removal efficiencies and energy consumption values comparable to those of the BDD anode at intermediate current intensities and due to its cost-effectiveness associated with its lower fabrication costs. These results highlight the potential of these ceramic anodes as a sustainable alternative for the treatment of wastewater containing microplastics., The authors are greatly thankful to the Agencia Estatal de Investigacion for the financial support through the grant (PID2023-147511OB-C21), funded by MICIU/AEI/10.13039/501100011033 and by ERDF/EU. M. P. Medina-Casas thanks the Generalitat Valenciana (Santiago Grisolía scholarship CIGRIS/2021/035) for funding this research.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Petroleum cokes as pore generators in ceramic electrodes: Limitations for their use

  • Orts, M. J.
  • Gozalbo, A.
  • Mestre, S.
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
[EN] The use of pore generators is a classical way to adjust the pore size distribution of porous ceramics. However, they must be selected to alter the processing of the ceramic as little as possible. Petroleum coke is an attractive pore generator for some ceramic compositions hard to process with other pore generators as starches. The analysis of the behaviour of the two main varieties, green coke and calcined coke, as pore generators in ceramic electrodes of Sb-doped SnO2 have shown that they allow the shaping of the electrodes by dry-pressing, but proportions higher than 10 wt% require great care in the process. The design of the sintering cycle is restricted by their thermal behaviour to a heating rate <= 2 degrees C center dot min-1 in the 150-600 degrees C interval to avoid defects in the sintered electrodes. Green coke undergoes a sudden expansion around 270 degrees C that is absent in calcined coke, but calcined coke oxidises at lower rate and its remainder can reduce SnO2 to Sn at higher temperatures. Calcined coke generates lower porosity in the sintered specimens than green coke at equal proportion in the raw materials mixture and requires higher proportions to obtain a bimodal pore size distribution. In addition, the type of coke has no definite effect on the properties of the sintered ceramic. In this work, the critical property, electrical resistivity of the electrodes, is mainly related to the generated porosity. The described limitations must be considered prior to select any of two cokes as pore generator in ceramics., This work was supported by Ministerio de Ciencia, Innovacio <acute accent> n y Universidades (Project: PID2023-147511OB-C22) and by the European Regional Development Fund (FEDER) .