Pasar al contenido principal

ELECTRODOS CERAMICOS CATALITICOS DESTINADOS AL DESARROLLO DE BATERIAS DE FLUJO REDOX Y LA FOTOELECTROOXIDACION DE CONTAMINANTES EMERGENTES

PID2023-147511OB-C22

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2023
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT JAUME I DE CASTELLO

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Abnormal Expansion Along the Synthesis of Zinc Stannate: A Way for Porous Ceramics Without Addition of Pore Generators

  • Orts, Maria Jose
  • Canas, Eugeni
  • Mestre, Sergio
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
[EN] The abnormal expansion associated with the simultaneous synthesis and sintering of Zn2SnO4 from ZnO and SnO2 has been investigated. This expansion was the effect of the synthesis reaction, as it was correlated with the degree of conversion. Two stages have been identified in the reaction. The first one has been modeled with the Avrami equation and the second one with the Dunwald equation, which corresponds to nucleation-and-growth and diffusion-controlled mechanisms, respectively. A hypothesis about the mechanism of the reaction and the origin of the expansion has been proposed. The abnormal expansion was reflected in the microstructure, porosity, and pore size distribution of the test specimens. Results showed that adjusting the thermal cycle, this phenomenon allows the manufacture of porous ceramics with the microstructure of a microfiltration membrane without the addition of pore generators., This work was supported by the Ministerio de Ciencia, Innovacion y Universidades (Project: PID2023-147511OB-C22) and by the European Regional Development Fund (FEDER).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Petroleum cokes as pore generators in ceramic electrodes: Limitations for their use

  • Orts, M. J.
  • Gozalbo, A.
  • Mestre, S.
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
[EN] The use of pore generators is a classical way to adjust the pore size distribution of porous ceramics. However, they must be selected to alter the processing of the ceramic as little as possible. Petroleum coke is an attractive pore generator for some ceramic compositions hard to process with other pore generators as starches. The analysis of the behaviour of the two main varieties, green coke and calcined coke, as pore generators in ceramic electrodes of Sb-doped SnO2 have shown that they allow the shaping of the electrodes by dry-pressing, but proportions higher than 10 wt% require great care in the process. The design of the sintering cycle is restricted by their thermal behaviour to a heating rate <= 2 degrees C center dot min-1 in the 150-600 degrees C interval to avoid defects in the sintered electrodes. Green coke undergoes a sudden expansion around 270 degrees C that is absent in calcined coke, but calcined coke oxidises at lower rate and its remainder can reduce SnO2 to Sn at higher temperatures. Calcined coke generates lower porosity in the sintered specimens than green coke at equal proportion in the raw materials mixture and requires higher proportions to obtain a bimodal pore size distribution. In addition, the type of coke has no definite effect on the properties of the sintered ceramic. In this work, the critical property, electrical resistivity of the electrodes, is mainly related to the generated porosity. The described limitations must be considered prior to select any of two cokes as pore generator in ceramics., This work was supported by Ministerio de Ciencia, Innovacio <acute accent> n y Universidades (Project: PID2023-147511OB-C22) and by the European Regional Development Fund (FEDER) .