Pasar al contenido principal

PRODUCCION DE HIDROGENO Y GAS DE SINTESIS DE COMPOSICION AJUSTABLE A PARTIR DE CORRIENTES DE FERMENTACION ETANOLICA Y BIOCARBONES

PID2023-147861OB-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2023
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ZARAGOZA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fe-based catalysts on cellulose-derived carbon towards low-temperature RWGS

  • Azancot, Lola
  • Tarifa, Pilar
  • Cazaña, Fernando
  • Monzón, Antonio
The RWGS reaction is a key pathway for converting CO2 into CO, a crucial intermediate to produce synthetic fuels and chemicals. Optimizing RWGS catalysts to enhance CO selectivity at lower temperatures facilitates integration with downstream processes such as Fischer-Tropsch synthesis. This study investigates the promotional effects of Mo, Cr, Mn, and Ce on Fe/CDC catalysts for RWGS. The catalysts were synthesized using cellulose as a biotemplate, yielding Fe/cellulose-derived carbon (Fe/CDC) catalysts., The catalysts were characterized by analyzing metal dispersion, metal-support interactions, and CO2 adsorption properties. The results for the different promoters indicate that Fe-Cr forms alloys, Fe-O-Mo species are generated, while Fe-Mn and Fe-Ce promote strong Fe-Me interactions through surface migration of the promoter. The Fe/CDC catalyst exhibited the highest CO2 conversion but the lowest CO selectivity. In contrast, Fe-Ce/CDC and Fe-Mn/CDC, which exhibit higher basicity, showed lower CO2 conversion but higher CO selectivity. This behavior is likely due to strong CO2 adsorption, which inhibits the reaction, as well as lower surface exposure of Fe, given that Ce and Mn cover Fe active sites, further affecting catalytic performance., Conversely, Fe-Mo/CDC, which has intermediate basicity, achieved the highest CO selectivity despite a lower CO2 conversion compared to the unpromoted catalyst. This suggests that Mo, not only influences adsorption properties, but also induces electronic effects through Fe-O-Mo species, promoting CO formation., These findings highlight Fe-Mo/CDC as a promising catalyst for low-temperature RWGS. Further studies are needed to elucidate the specific role of Mo in Fe-based catalysts and to optimize its catalytic performance., Grant JDC2022-048904-I funded by MICIU/AEI/10.13039/501100011033 and by European Union NextGeneration EU/PRTR. Grants PID2020-113809RB-C31 and PID2023-147861OB-C21 funded by MICIU/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fe-modified catalytic carbons for enhanced CO2 gasification: Influence of carbon source and operating conditions

  • Chaos-Hernández, D.
  • Latorre, Nieves
  • Tarifa, Pilar
  • Romeo, Eva
  • Monzón, Antonio
In this study, we present results of characterization and reactivity of Fe-doped carbonaceous materials during their catalytic gasification with CO2. The samples include carbons derived from the thermal treatment of lignocellulosic residues pine sawdust (PiDC) and almond shells (AlDC) and a commercial graphite (AG) used for comparison. Iron-supported samples (Fe/PiDC, Fe/AlDC, Fe/AGC) were prepared by impregnating the raw materials (pine sawdust, almond shells and graphite) with a Fe precursor, followed by thermal decomposition under a reducing atmosphere. Characterization results revealed that Fe incorporation significantly influences the textural properties of the resulting carbonaceous materials. Specifically, Fe doping increased defect density and surface roughness while reducing microporosity, particularly in biomass derived carbons, as the Fe content increased. Dynamic gasification tests demonstrated that Fe enhances the reaction rate and lowers the onset temperature. Optimal gasification performance was achieved with intermediate Fe loadings maximizing catalytic efficiency while preventing rapid deactivation of Fe nanoparticles. Within the temperature range of 850–950 °C, nearly complete gasification was achieved, with residual content minimized to 10 % for Fe(4.2 %wt)/AGC, 16 % for Fe(2.4 %wt)/PiDC and 13 % for Fe(3.2 %wt)/AlDC. However, higher Fe loadings and temperatures exceeding 900 °C led to accelerated Fe deactivation due to sintering and oxidation. At CO2 concentrations below 8.3 %, these adverse effects were mitigated, optimizing the gasification rate. These findings underscore the critical interplay between Fe dispersion, carbon structure and gasification conditions, offering valuable insights for designing efficient Fe-based catalytic systems for CO2 valorization in sustainable energy applications., Grants PID2020-113809RB-C31 and PID2023-147861OB-C21 funded by MICIU/AEI/10.13039/501100011033. D. Chaos-Hernández thanks the MICINN/AEI for funding from the Pre-doctoral contract. Ref.: PRE2021-09794., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of operating conditions on the kinetics of Iron-catalysed gasification of biocarbons with CO2

  • Chaos-Hernández, D.
  • Latorre, Nieves
  • Tarifa, Pilar
  • Romeo, Eva
  • Monzón, Antonio
In this study, we investigated the catalytic gasification of cellulose-derived biocarbons (CDC) with CO₂ using Fe as the catalyst. Fe(%wt)/CDC samples were synthesized through controlled pyrolysis of cellulose impregnated with iron precursors and evaluated under varying reaction temperatures and CO₂ concentrations. Characterization by XRD, TGA, Raman, TEM, and N₂ adsorption revealed that the initial Fe loading in cellulose not only determines the final carbon content in each Fe(%wt)/CDC sample but also plays a crucial role in regulating the textural and structural properties of the resulting carbonaceous materials, as well as the Fe nanoparticle size distribution. Specifically, higher Fe loading led to a decrease in surface area, reduction of microporosity, an increase of pore diameter, and to larger average Fe nanoparticle sizes. During gasification, Fe nanoparticles were oxidized by CO₂, resulting in a decline in catalytic activity and ultimately limiting the complete gasification of the carbonaceous material by the end of the reaction. These opposing effects explain the varying behaviour observed in the Fe(%wt)/CDC samples studied. Analysis of the initial gasification rates indicated that both, the apparent reaction order with respect to CO₂ and the activation energy, increased with reaction temperature and CO₂ partial pressure (pCO₂), respectively. These results were successfully interpreted using a Langmuir-Hinshelwood model, which accounts for the influence of CO₂ adsorption on the observed reaction rate. These findings underscore the potential of Fe(%wt)/CDC materials for CO₂ utilization and biomass valorisation, providing valuable insights for the development of efficient catalytic gasification processes., Grants PID2020-113809RB-C31 and PID2023-147861OB-C21 funded by MICIU/AEI/10.13039/501100011033. D. Chaos-Hernández thanks the MICINN/AEI for funding from the Pre-doctoral contract. Ref.: PRE2021-09794., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Fe-based catalysts on cellulose-derived carbon towards low-temperature RWGS

  • Azancot, L.
  • Tarifa, P.
  • Cazaña, F.
  • Monzón, A.
The RWGS reaction is a key pathway for converting CO2 into CO, a crucial intermediate to produce synthetic fuels and chemicals. Optimizing RWGS catalysts to enhance CO selectivity at lower temperatures facilitates integration with downstream processes such as Fischer-Tropsch synthesis. This study investigates the promotional effects of Mo, Cr, Mn, and Ce on Fe/CDC catalysts for RWGS. The catalysts were synthesized using cellulose as a biotemplate, yielding Fe/cellulose-derived carbon (Fe/CDC) catalysts. The catalysts were characterized by analyzing metal dispersion, metal-support interactions, and CO2 adsorption properties. The results for the different promoters indicate that Fe-Cr forms alloys, Fe-O-Mo species are generated, while Fe-Mn and Fe-Ce promote strong Fe-Me interactions through surface migration of the promoter. The Fe/CDC catalyst exhibited the highest CO2 conversion but the lowest CO selectivity. In contrast, Fe-Ce/CDC and Fe-Mn/CDC, which exhibit higher basicity, showed lower CO2 conversion but higher CO selectivity. This behavior is likely due to strong CO2 adsorption, which inhibits the reaction, as well as lower surface exposure of Fe, given that Ce and Mn cover Fe active sites, further affecting catalytic performance. Conversely, Fe-Mo/CDC, which has intermediate basicity, achieved the highest CO selectivity despite a lower CO2 conversion compared to the unpromoted catalyst. This suggests that Mo, not only influences adsorption properties, but also induces electronic effects through Fe-O-Mo species, promoting CO formation. These findings highlight Fe-Mo/CDC as a promising catalyst for low-temperature RWGS. Further studies are needed to elucidate the specific role of Mo in Fe-based catalysts and to optimize its catalytic performance.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Fe-modified catalytic carbons for enhanced CO2 gasification: Influence of carbon source and operating conditions

  • Chaos-Hernández, D.
  • Latorre, N.
  • Tarifa, P.
  • Romeo, E.
  • Monzón, A.
In this study, we present results of characterization and reactivity of Fe-doped carbonaceous materials during their catalytic gasification with CO2. The samples include carbons derived from the thermal treatment of lignocellulosic residues pine sawdust (PiDC) and almond shells (AlDC) and a commercial graphite (AG) used for comparison. Iron-supported samples (Fe/PiDC, Fe/AlDC, Fe/AGC) were prepared by impregnating the raw materials (pine sawdust, almond shells and graphite) with a Fe precursor, followed by thermal decomposition under a reducing atmosphere. Characterization results revealed that Fe incorporation significantly influences the textural properties of the resulting carbonaceous materials. Specifically, Fe doping increased defect density and surface roughness while reducing microporosity, particularly in biomass derived carbons, as the Fe content increased. Dynamic gasification tests demonstrated that Fe enhances the reaction rate and lowers the onset temperature. Optimal gasification performance was achieved with intermediate Fe loadings maximizing catalytic efficiency while preventing rapid deactivation of Fe nanoparticles. Within the temperature range of 850–950 °C, nearly complete gasification was achieved, with residual content minimized to 10 % for Fe(4.2 %wt)/AGC, 16 % for Fe(2.4 %wt)/PiDC and 13 % for Fe(3.2 %wt)/AlDC. However, higher Fe loadings and temperatures exceeding 900 °C led to accelerated Fe deactivation due to sintering and oxidation. At CO2 concentrations below 8.3 %, these adverse effects were mitigated, optimizing the gasification rate. These findings underscore the critical interplay between Fe dispersion, carbon structure and gasification conditions, offering valuable insights for designing efficient Fe-based catalytic systems for CO2 valorization in sustainable energy applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Citrate-mediated structure and enthalpy-entropy trade-off in Ni-CeO2 catalysts for low-temperature CO2 methanation

  • Azancot, L.
  • Tarifa, P.
  • Cazaña, F.
  • Romeo, E.
  • Monzón, A.
Catalytic activity in heterogeneous reactions is often interpreted in terms of activation enthalpy, although reaction rates are governed by the activation free energy, which includes both enthalpic (ΔH‡) and entropic (ΔS‡) contributions. This simplification is particularly limiting in CO2 methanation under non-stoichiometric conditions, where performance is highly sensitive to hydrogen availability. Here, we investigate how the ΔH‡-ΔS‡ balance determines the apparent activation free energy governing catalytic performance in Ni-CeO2 catalysts. A series of catalysts was synthesized by varying the citrate-to-metal ratio as a single preparation parameter, enabling modification of metal-support interactions, defect density, and interfacial structure. Kinetic analysis based on transition state theory reveals a trade-off between the apparent activation enthalpy and entropy across the catalyst series. The most active catalyst (NiCeO2–1.37Cit) exhibits the highest activation enthalpy (100 kJ·mol−1) but a more favorable activation entropy, resulting in a lower apparent activation free energy and enhanced activity at low-temperature. This behavior is maintained under varying H2/CO2 feed ratios. Under lean conditions (H2/CO2 = 1:1) and 275 °C, NiCeO2–1.37Cit achieves 95% CH4 selectivity, corresponding to a methane yield of 7.5%, compared to 3.5 and 4.3% for the compared catalysts under identical conditions. Structural characterization correlates this performance with increased Ce3+ concentration, enhanced reducibility, lattice distortion, and a more developed Ni-CeO2 interface, consistent with a catalytic surface associated with a more favorable entropic contribution to activation. The enthalpy-entropy balance provides a framework to rationalize the relationship between catalyst structure, kinetic response, and catalytic performance, offering insight into catalyst design through control of the enthalpy-entropy balance.