Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fe-modified catalytic carbons for enhanced CO2 gasification: Influence of carbon source and operating conditions

  • Chaos-Hernández, D.
  • Latorre, Nieves
  • Tarifa, Pilar
  • Romeo, Eva
  • Monzón, Antonio
In this study, we present results of characterization and reactivity of Fe-doped carbonaceous materials during their catalytic gasification with CO2. The samples include carbons derived from the thermal treatment of lignocellulosic residues pine sawdust (PiDC) and almond shells (AlDC) and a commercial graphite (AG) used for comparison. Iron-supported samples (Fe/PiDC, Fe/AlDC, Fe/AGC) were prepared by impregnating the raw materials (pine sawdust, almond shells and graphite) with a Fe precursor, followed by thermal decomposition under a reducing atmosphere. Characterization results revealed that Fe incorporation significantly influences the textural properties of the resulting carbonaceous materials. Specifically, Fe doping increased defect density and surface roughness while reducing microporosity, particularly in biomass derived carbons, as the Fe content increased. Dynamic gasification tests demonstrated that Fe enhances the reaction rate and lowers the onset temperature. Optimal gasification performance was achieved with intermediate Fe loadings maximizing catalytic efficiency while preventing rapid deactivation of Fe nanoparticles. Within the temperature range of 850–950 °C, nearly complete gasification was achieved, with residual content minimized to 10 % for Fe(4.2 %wt)/AGC, 16 % for Fe(2.4 %wt)/PiDC and 13 % for Fe(3.2 %wt)/AlDC. However, higher Fe loadings and temperatures exceeding 900 °C led to accelerated Fe deactivation due to sintering and oxidation. At CO2 concentrations below 8.3 %, these adverse effects were mitigated, optimizing the gasification rate. These findings underscore the critical interplay between Fe dispersion, carbon structure and gasification conditions, offering valuable insights for designing efficient Fe-based catalytic systems for CO2 valorization in sustainable energy applications., Grants PID2020-113809RB-C31 and PID2023-147861OB-C21 funded by MICIU/AEI/10.13039/501100011033. D. Chaos-Hernández thanks the MICINN/AEI for funding from the Pre-doctoral contract. Ref.: PRE2021-09794., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of operating conditions on the kinetics of Iron-catalysed gasification of biocarbons with CO2

  • Chaos-Hernández, D.
  • Latorre, Nieves
  • Tarifa, Pilar
  • Romeo, Eva
  • Monzón, Antonio
In this study, we investigated the catalytic gasification of cellulose-derived biocarbons (CDC) with CO₂ using Fe as the catalyst. Fe(%wt)/CDC samples were synthesized through controlled pyrolysis of cellulose impregnated with iron precursors and evaluated under varying reaction temperatures and CO₂ concentrations. Characterization by XRD, TGA, Raman, TEM, and N₂ adsorption revealed that the initial Fe loading in cellulose not only determines the final carbon content in each Fe(%wt)/CDC sample but also plays a crucial role in regulating the textural and structural properties of the resulting carbonaceous materials, as well as the Fe nanoparticle size distribution. Specifically, higher Fe loading led to a decrease in surface area, reduction of microporosity, an increase of pore diameter, and to larger average Fe nanoparticle sizes. During gasification, Fe nanoparticles were oxidized by CO₂, resulting in a decline in catalytic activity and ultimately limiting the complete gasification of the carbonaceous material by the end of the reaction. These opposing effects explain the varying behaviour observed in the Fe(%wt)/CDC samples studied. Analysis of the initial gasification rates indicated that both, the apparent reaction order with respect to CO₂ and the activation energy, increased with reaction temperature and CO₂ partial pressure (pCO₂), respectively. These results were successfully interpreted using a Langmuir-Hinshelwood model, which accounts for the influence of CO₂ adsorption on the observed reaction rate. These findings underscore the potential of Fe(%wt)/CDC materials for CO₂ utilization and biomass valorisation, providing valuable insights for the development of efficient catalytic gasification processes., Grants PID2020-113809RB-C31 and PID2023-147861OB-C21 funded by MICIU/AEI/10.13039/501100011033. D. Chaos-Hernández thanks the MICINN/AEI for funding from the Pre-doctoral contract. Ref.: PRE2021-09794., Peer reviewed