Pasar al contenido principal

NANO INGENIERIA SOSTENIBLE PARA EL DESARROLLO DE MATERIALES BASE CEMENTO DE ALTAS PRESTACIONES UTILIZANDO NANOCELULOSA DERIVADA DE BIOMASA

PID2023-151636OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2023
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDADE DA CORUÑA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Self-Healing Mechanisms in Concrete Cured in CO₂-Saturated Environments: Synergistic Effects of Biomass Forest Ash and Metakaolin

  • Cantero, B.
  • Seara Paz, Sindy
  • Cuenca, E.
  • Ferrara, Liberato
  • González-Fonteboa, Belén
[Abstract]: This study investigates the effect of autogenous self-healing in high-performance ternary concrete mixes incorporating biomass forest ash when exposed to concentration of carbon dioxide (CO₂). To analyse this phenomenon, three cementitious systems were studied: i) 100 % Portland cement, ii) 60 % Portland cement, 25 % biomass ash, and 15 % metakaolin, and iii) 60 % Portland cement, 25 % limestone filler, and 15 % metakaolin. The samples, prepared with different initial crack widths, were subjected to four self-healing conditions: i) continuous immersion in tap water (TW), ii) wet-dry cycles in TW, iii) continuous immersion in carbonated water (CW), and iv) wet-dry cycles in CW, over two exposure periods (28 and 90 days). The effectiveness of the process was evaluated through the analysis of surface crack sealing using a digital microscope and the recovery of impermeability through water permeability tests. To understand the chemical mechanisms involved, the self-healing products formed were analysed using SEM. The results showed that the samples self-healed in CW tended to exhibit lower surface sealing efficiency compared to TW, regardless of the mix type, due to the slightly acidic pH caused by the dissolution of CO₂ into carbonic acid. However, in the higher pH inside the cracks promoted the precipitation of calcium carbonates, improving internal impermeability even without achieving effective surface sealing. In this context, biomass ash was particularly effective as a water reservoir, promoting more efficient internal curing when combined with metakaolin and achieving better results in terms of internal impermeability than conventional mixes with cement or limestone filler combined with metakaolin., This research has been funded by the following projects, which contributed to the development of this study: NanoBioCell: Nano-engineering of Sustainable High-Performance Cementitious Materials Using Biomass-Derived Nanocellulose [PDC2023-151636B-I00], funded by the Spanish Ministry of Science, Innovation and Universities. The first author gratefully acknowledges the financial support received through the “Juan de la Cierva-Formación” programme 2021 (No. FJC2021-047024-I), funded by the same ministry, which has supported his participation in this work. He also expresses his gratitude to the "José Castillejo" Programme for Mobility Stays Abroad (Grant No. CAS22/00481), which enabled him to undertake a research stay at the Dipartimento di Ingegneria Civile e Ambientale - Politecnico di Milano. Finally, the authors acknowledge the technical support provided by the Centro de Innovación Tecnológica en Edificación e Ingeniería Civil (CITEEC).
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Comparative Assessment of Binary Alkali-Activated Mortars Incorporating Construction and Demolition Waste under Dry and CO₂ Curing Conditions

  • Cantero, B.
  • Sequeira, Lucas
  • Brito, Jorge de
  • Bravo, Miguel
[Abstract]: Construction and demolition waste (CDW) has attracted increasing attention as a potential precursor for alkali-activated materials, although its heterogeneous nature often limits mechanical performance. This study investigates the behaviour of binary alkali-activated mortars manufactured with different types of CDW: recycled concrete (RC), recycled brick (RB) and recycled tile (RT). The combination of these precursors with 30% fly ash (FA) as a supplementary precursor was also investigated. The mixes were subjected to two curing conditions—dry and CO₂—in order to evaluate the influence of precursor mineralogy and curing regime on their mechanical and physical performance. Compressive and flexural strengths, dynamic modulus of elasticity, ultrasonic pulse velocity (UPV), porosity, shrinkage and carbonation depth were determined. The results showed that precursor reactivity governs the overall behaviour. Tile-based systems (RT) achieved the highest strengths and lowest water-accessible porosity, followed by RB, whereas RC exhibited limited reactivity. Under CO₂ curing, RT70 reached 20.3 MPa at 28 days, representing a 53.9% increase compared to dry curing. In addition, CO₂ curing reduced water-accessible porosity by up to 15%. For a comparable compressive strength, CO₂-cured mixes exhibited higher flexural strength and dynamic modulus of elasticity than those cured under dry conditions. In contrast, RC systems showed a 21.5% reduction in compressive strength at 28 days under CO₂ curing, indicating that early carbonation may adversely affect low reactivity, calcium-rich residues. The incorporation of 30% FA mitigated this effect, increasing the 28-day compressive strength under CO₂ curing from 7.7 MPa (RC100) to 14.3 MPa (RC70). Correlation analysis confirmed an exponential relationship between mechanical performance and water-accessible porosity, highlighting the governing role of pore structure. Overall, the combined use of FA and controlled CO₂ curing offers a viable strategy for enhancing selected CDW-based alkali-activated systems., The first author also wishes to thank the Spanish Ministry of Research, Science and Universities for the financial support provided through the Juan de la Cierva–Formación postdoctoral programme (2021 call, Grant No. FJC2021–047024-I). The authors gratefully acknowledge the support of the Spanish Ministry of Science and Innovation and the Agencia Estatal de Investigación (AEI, Spanish State Research Agency) for funding the project NanoBioCell: Nanoengineering of Sustainable and High-Performance Cementitious Materials Using Biomass-Derived Nanocellulose (Grant No. PDC2023–151636B-I00). This research was funded in part by the Fundação para a Ciência e a Tecnologia, I.P. (FCT, https://ror.org/00snfqn58) under Grant UID/6438/2025 (https://doi.org/10.54499/UID/06438/2025) of the research unit CERIS. Technical support provided by the Centro de Innovación Tecnológica en Edificación e Ingeniería Civil (CITEEC) is also acknowledged., Portugal. Fundação para a Ciência e a Tecnologia; UID/6438/2025