Pasar al contenido principal

NANOESTRUCTURAS Y METASUPERFICIES SOSTENIBLES INDUCIDAS POR LASER PARA FOTONICA Y FOTOVOLTAICA AVANZADAS-CSIC

PID2024-156974OB-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para la Investigación y el Desarrollo Experimental
Subprograma Subprograma Estatal de Generación de Conocimiento Científico-Técnico y Desarrollo Experimental
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2024
Plan Estatal 2024-2027 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning optical and electrical properties of zinc oxide PLD films: effect of temperature and air annealing

  • Ramos-Justicia, J. F.
  • Sotillo, B.
  • Urbieta, A.
  • Gonzalo de los Reyes, J.
  • Fernández, P.
9 pages, 9 figures, 3 tables, The effect of substrate temperature and post-deposition thermal annealing on the optical and electrical properties of ZnO thin films grown by pulsed laser deposition are studied. XRD analysis reveals a (002) orientation and stress relaxation with increasing growth temperature. AFM shows a granular surface topography, whose grains become larger after annealing. Competition of coalescence and recrystallisation mechanisms is proposed to explain these results. Optical transmission experiments reveal changes in the relative intensity of the defect bands in the visible region, caused by changes in the population of intrinsic defects. Electrical measurements find that room-temperature grown films are p-type, while higher-temperature deposited films are n-type, and all become p-type after annealing. Low-temperature measurements reveal a switch in the conductivity type from p-to n-type around 220–250 K depending on the samples, which is explained due to competing defect-related conduction mechanisms., The authors are grateful to A. Soubrie (Centro Nacional de Microscopía Avanzada, CNME) for her assistance during AFM measurements and I. Carabias (Unidad de Rayos X, UCM) for XRD diffractograms. This work was partially funded by the Spanish Research Agency (AEI, Ministry of Research and Innovation) and the European Regional Development Fund (ERDF) under grant PID2024-156974OB-C21. J.F. Ramos- Justicia acknowledges financial support from UCM-Banco Santander (Programa de ayudas de Contratos Predoctorales CT15/23). J.F. Ramos- Justicia, B. Sotillo, A. Urbieta and P. Fern´ andez acknowledges financial support from UCM under Project PR3/23–30813., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Formation and Coherent Propagation of Femtosecond-Laser-Induced Periodic Surface Structures (LIPSS) in Fluorine-Doped Tin Oxide: Control, Potential Applications, and Challenges

  • Gómez-Muñoz, Gonzalo
  • Ariza, Rocío
  • Núñez-Galvez, Fernando
  • López-Flores, Víctor
  • Cabello, Fátima
  • Sotillo, Belén
  • Prieto, Carlos
  • Gonzalo de los Reyes, J.
  • García-López, Francisco Javier
  • Fernández Sánchez, Paloma
  • López-Sánchez, Carmen
  • Solís Céspedes, Javier
16 pages, 13 figures, 1 table, We have analyzed the formation and coherent propagation of laser-induced periodic surface structures (LIPSS) upon fs-laser irradiation of fluorine-doped tin oxide (FTO) films. The aim is the generation of large electrical anisotropies in macroscopic areas for applications including laser-written transparent heaters, sensors, or substrates for electrically controllable wettability, among others. The films have been processed with high-repetition-rate (hundreds of kHz) fs-laser pulses at 1030 nm using different laser (fluence and pulse duration) and scanning parameters (speed and line overlap). Optimal LIPSS formation and coherent propagation are conditioned by the dynamic evolution of the F content in the laser-processed regions that can be controlled via processing parameters. However, the homogeneity in the spatial distribution of F in the microscale in the pristine samples can generate important issues that are carefully considered and discussed in the present work. Still, the formation of optically and electrically highly anisotropic surfaces for laser scanning speeds well above 1.0 m/s has been demonstrated, reaching electrical resistivity anisotropy factors of >103. Consequently, the potential development of large-area applications using LIPSS-structured FTO films seems feasible, as we have demonstrated by fabricating an efficient laser-written electrothermal transparent device as a proof-of-concept., This research was partially funded by the Spanish Ministry of Science, Innovation and Universities (MICIU), the Spanish Research Agency (AEI- MICIU), and the European Regional Development Fund (ERDF) through grant numbers PID2023148178OB-C22 (HyperSpec) and PID2024-156974OB-C21 (SLIM-2P), funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER) A way of making Europe”. This research was also partially funded by the Consejeri a de Educación, Juventud y Deporte, Comunidad de Madrid through grant number TEC-2024/TEC-85 (MATRIX-CM). R.A. acknowledges the funding from a Marie Skłodowska Curie Postdoctoral grant (N° 101149132)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

10-nm silicon nanostructures for phase-change UV-readable optical data storage

  • Toudert, Johann
  • Serna, Rosalía
Achieving state-of-the-art optical data storage requires raising device capacity well above commercial standards. This requires media structured at a much smaller scale and enabling readout at a shorter wavelength. Current CDs, DVDs and Blu-rays are read with visible light, and are based on metallic reflection gratings and phase-change recording layers structured at the few-hundred-nm scale. Herein, we report numerical simulations that introduce 10 nm structured silicon as a promising UV-readable data storage platform. Recording on it harnesses the amorphous-to-crystalline phase-change of silicon, the two phases presenting well-constrasted UV optical properties. Furthermore, the phase-change contrast is strongly enhanced in the Vacuum UV thanks to the distinct interband plasmon resonances of the amorphous and crystalline nanostructures, which have an epsilon-near-zero and surface plasmonic character, respectively. Silicon nanogratings with a 10 nm width and a 20 nm period resonate near the wavelength of 120 nm, at which phase-change induces a 600% maximum optical transmittance contrast. This paves the way toward UV-readable data storage platforms with a 10–100 times increased data density, which could be implemented by harnessing the well-established silicon nanotechnology., This work has been partly funded by the national research grants ALPHOMENA (PID2021-123190OBI00f) and SLIM-2P (PID2024-156974OB-C21) funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR and the European Regional Development Fund (ERDF)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Near-infrared laser interference patterning of silver nanocomposite films: controlling spatial nanoparticle distributions for plasmonic coloring

  • Gonzalo de los Reyes, J.
  • García-Lechuga, Mario
  • Baraldi, G.
  • Philip, Alka
  • Siegel, Jan
[Data availability statement] All data that support the findings of this study are included within the article (and any supplementary files)., Nanocomposites formed by metal nanoparticles embedded in dielectric host matrices present exciting optical properties governed mostly by the material, size, shape and separation of the nanoparticles. This opens the opportunity to drastically change their optical response by controlled laser irradiation. Here, we demonstrate that laser-irradiation at 800 nm of thin nanocomposite films, consisting of non-spherical near-coalescence silver nanoparticles embedded in an ultrathin amorphous Al<inf>2</inf>O<inf>3</inf> matrix grown by pulsed laser deposition, leads to strong local color changes. Combined with laser interference patterning, this approach enables single pulse fabrication of parallel fringes and dot arrays with different colors and selectable periods in the range of 1–5 μm, which can be extended over large areas by sample scanning. We show that the transmission and reflectivity spectra of the fringes strongly differ from those of the unexposed film and can be tuned by changing the pulse duration, pulse number and fluence. Transmission electron microscopy on free-standing irradiated films shows that the observed spectral response is directly correlated to strong changes in the nanoparticle shape, distribution and size. The laser-coloring strategy proposed here can be applied to other metal systems for a range of applications, including optical encoding, data storage, and fabrication spectral filters., This work has been supported by Grants HyperSpec (PID2023-148178OB-C22) and SLIM-2P (PID2024-156974OB-C21), funded by MICIU/AEI/10.13039/501100011033, as well as by grant MATRIX-CM (TEC-2024/TEC-85), funded by Consejería de Educacion, Ciencia y Universidades (Comunidad de Madrid, (Spain)). Alka Philip acknowledges an FPI/PIF scholarship from MICIU/AEI/10.13039/501100011033. The authors want to acknowledge assistance from ICTS-CNME (Madrid, Spain) for the TEM measurements., Peer reviewed
Docta Complutense
Publicación Artículo científico (JournalArticle)

Tuning optical and electrical properties of zinc oxide PLD films: effect of temperature and air annealing

  • Ramos Justicia, Juan Francisco
  • Sotillo Buzarra, Belén
  • Urbieta Quiroga, Ana Irene
  • Gonzalo, J.
  • Fernández Sánchez, Paloma
The effect of substrate temperature and post-deposition thermal annealing on the optical and electrical properties of ZnO thin films grown by pulsed laser deposition are studied. XRD analysis reveals a (002) orientation and stress relaxation with increasing growth temperature. AFM shows a granular surface topography, whose grains become larger after annealing. Competition of coalescence and recrystallisation mechanisms is proposed to explain these results. Optical transmission experiments reveal changes in the relative intensity of the defect bands in the visible region, caused by changes in the population of intrinsic defects. Electrical measurements find that room-temperature grown films are p-type, while higher-temperature deposited films are n-type, and all become p-type after annealing. Low-temperature measurements reveal a switch in the conductivity type from p-to n-type around 220–250 K depending on the samples, which is explained due to competing defect-related conduction mechanisms.