Pasar al contenido principal

ADAPTACION DE ARQUITECTURAS DE POLIMEROS EN FORMA DE CEPILLO Y ESTRATEGIAS DE CONFINAMIENTO PARA EL DESARROLLO DE MATERIALES ENERGETICOS AVANZADOS

PID2024-157277NA-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para la Investigación y el Desarrollo Experimental
Subprograma Subprograma Estatal de Generación de Conocimiento Científico-Técnico y Desarrollo Experimental
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2024
Plan Estatal 2024-2027 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario ASOCIACIÓN DE INVESTIGACIÓN MPC MATERIALS PHYSICS CENTER

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Single-bond dual dynamics: Temperature-gated associative and dissociative exchange of disulfides in a sustainable covalent adaptable network

  • Guerrero-Ruiz, Federico
  • Otaegi, Itziar
  • Verde-Sesto, Ester
  • Maiz, Jon
Data will be made available on request., Dynamic covalent chemistry provides a powerful route to sustainable polymer networks, yet achieving precise control over multiple exchange mechanisms within a single bond remains challenging. Here, we report a covalent adaptable network (CAN) based exclusively on disulfide bonds that exhibits a temperature-gated switch between associative and dissociative exchange pathways, without the need for mixed chemistries or additives. Below 365 K, the material behaves as a vitrimer via disulfide metathesis; above this threshold, it transitions to a dissociative regime governed by heterolytic S-S bond cleavage. This sharp and reversible shift demonstrates a cleanly resolved dual dynamic mode within a single bond type. The material combines excellent thermal and chemical resistance with self-healing at room temperature and full mechanical recyclability, achieving high performance alongside environmental resilience. Synthesized via a green, scalable process from a commercially available, low-cost monomer, this system advances recyclable thermosets and establishes a new model for sustainable, stimuli-responsive materials., Grant No. TED2021-130107A-I00 funded by MICIU/AEI/10.13039/ 501100011033 and “European Union NextGenerationEU/PRTR”, Grant No. PID2024-157277NA-I00 funded by MICIU/AEI/10.13039/501100011033 and ERDF/EU, and financial support from Eusko Jaurlaritza (code: IT1566-22) are acknowledged. Additionally, financial support from Gipuzkoako Foru Aldundia through the Programa de Red Guipuzcoana de Ciencia, Tecnología e Innovación (code: 2024-CIEN-000014-01) is also acknowledged. E. V-S. and J. M. acknowledge support from the “Ramón y Cajal” Program, Grant No. RYC2022-037590-I and No. RYC2023-044285-I, funded by MICIU/AEI/10.13039/501100011033 and ESF+, respectively. Some of this work was performed at the Raman facility located at the CFM-MPC. An equipment supported by resources of the IKUR Strategy under collaboration agreement with Ikerbasque on behalf of the Department of Science, Universities and Innovation of the Basque Government., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Surface-adaptive antifouling coatings from amphiphilic methacrylate-based copolymers: synthesis, characterization, and performance evaluation

  • Peña-Figueroa, Miriam
  • Saa, Laura
  • Cortajarena, Aitziber L.
  • Alvarez-Fernandez, Alberto
  • Verde-Sesto, Ester
  • Maestro, Armando
Data will be made available on request., Biofouling remains a persistent issue in biomedical applications such as tissue engineering, wound healing, and the use of medical devices. Developing antifouling coatings that can perform reliably on both hydrophilic and hydrophobic surfaces is a significant challenge. In this work, amphiphilic random copolymers composed of poly(ethylene glycol) methyl ether methacrylate and 2-acetoacetoxy ethyl methacrylate [P(OEGMA-co-AEMA)] were synthesized through controlled radical polymerization. These copolymers were deposited onto substrates using the Langmuir–Blodgett technique, enabling precise control over film formation at the air–water interface. Structural analysis using atomic force microscopy, ellipsometry, and adhesion force mapping showed that the copolymers self-assembled into nanostructured domains due to phase segregation between hydrophilic and hydrophobic segments. The orientation of these domains was influenced by the underlying substrate: OEGMA segments aligned toward hydrophilic surfaces, while AEMA segments oriented toward hydrophobic ones. This substrate-responsive organization led to uniform film coverage and distinct surface morphologies tailored to the surface chemistry. Bacterial adhesion assays demonstrated that the coatings significantly reduced fouling, achieving up to 80 % reduction in bacterial attachment on both types of substrates. The ability of these nanostructured films to adapt their configuration based on surface properties, while maintaining effective antifouling behavior, underscores their potential as broadly applicable surface coatings. These results support the development of versatile, high-performance antifouling materials suited to a wide range of biomedical environments., E.V-S thanks the “Ramón y Cajal” Program Grant No. RYC2022-037590-I funded by MICIU/AEI/10.13039/501100011033 and ESF+. A.M acknowledges support by PID2021-129054NA-I00 funded by MICIU/AEI/10.13039/501100011033 and FEDER, UE; and from the Department of Education of the Basque Government under grant PIBA-2023-1-0054. . A.L.C. acknowledges support by the Spanish State Research Agency grant PID2022-137977OB-I00 funded by MCIN/AEI/ 10.13039/501100011033. A.A-F. is grateful for support from the Provincial Council of Gipuzkoa under the program Fellow Gipuzkoa, as well as from the project PID2024-157277NA-I00 funded by MICIU/AEI /10.13039/501100011033 and FEDER, UE. E.V-S, A.M., A.L.C., A.A-F acknowledge support from the IKUR Strategy project, IKUR-Neutrionica 2025-2026, NEU6. NANOBIO grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Engineering surface chemistry to enhance ferroelectric phase formation in ultrathin PVDF-TrFE films

  • Mosquera-Vallin, Andres
  • Hemmerle, Arnaud
  • Maiz, Jon
  • Alvarez-Fernandez, Alberto
The development of flexible, lightweight electronic devices has driven growing interest in ferroelectric polymers, with a focus on poly(vinylidene fluoride-trifluoroethylene) (PVDF-TrFE) copolymers. These materials offer solution processability, mechanical flexibility, and high remanent polarization, making them well-suited for applications in sensors, nonvolatile memories, and energy harvesters. However, as film thickness is reduced below 50 nm, crystallization becomes increasingly sensitive to interfacial interactions, leading to variations in phase composition and surface morphology. This work investigates how controlled modifications to substrate surface chemistry influence the crystallization behavior of ultrathin PVDF-TrFE films. To this end, polymer brushes of varying polarity were grafted onto silicon oxide substrates to create a systematic gradient in surface energy, spanning from hydrophilic to hydrophobic regimes. PVDF-TrFE copolymers with VDF:TrFE ratios of 80:20, 75:25, and 70:30 were spin-coated onto these surfaces to produce uniform films with thicknesses below 50 nm. Ellipsometry and contact-angle measurements were used to confirm brush coverage and film thickness. Crystalline phase composition was quantified using attenuated total reflectance Fourier-transform infrared spectroscopy (ATR-FTIR) and grazing-incidence wide-angle X-ray scattering (GIWAXS), while atomic force microscopy (AFM) was employed to characterize nanoscale surface topography. Results demonstrate that both brush chemistry and copolymer composition significantly affect β-phase content and crystalline texture. Hydrophobic surfaces consistently promoted superior film coverage, larger crystalline domains, and higher electroactive β-phase content compared to hydrophilic counterparts. These findings provide a detailed framework for controlling phase behavior and morphology in nanoconfined PVDF-TrFE films. By controlling the interface rather than the material itself, this study offers a simple and effective strategy for improving ultrathin ferroelectric films, providing useful design guidelines for flexible electronics and opening new directions for research in nanoscale polymer engineering., The authors acknowledge SOLEIL for the allocation of beamtime on the SIRIUS beamline under proposal No. 99250162. A.A.-F. and J.M. acknowledge support from the “Ramón y Cajal” Program, Grant Nos. RYC2024-050339-I and RYC2023-044285-I, respectively, funded by MICIU/AEI/10.13039/501100011033 and ESF+, as well as from the project PID2024-157277NA-I00 funded by MICIU/AEI/10.13039/501100011033 and FEDER, UE. The authors also acknowledge the financial support received from the IKUR Strategy under the collaboration agreement between Ikerbasque Foundation and the Materials Physics Center on behalf of the Department of Science, Universities and Innovation of the Basque Government. A.M-V. is grateful for the financial support received from the Materials Physics Center (MPC) through the MPC master’s thesis grant program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Insights into the self-assembly and interaction of Sars-Cov-2 fusion peptides with biomimetic plasma membranes

  • Pawar, Nisha
  • Santamaria, Andreas
  • Romano, Brígida
  • Batchu, Krishna C.
  • Laux, Valérie
  • Guzmán, Eduardo
  • Zaccai, Nathan R.
  • Alvarez-Fernandez, Alberto
  • Maestro, Armando
First identified in late 2019, the COVID-19 pandemic, caused by the SARS-CoV-2 coronavirus, rapidly escalated into a global health crisis. SARS-CoV-2 is a single-stranded RNA virus encased in a lipid envelope that houses key structural proteins, including the Spike glycoprotein, which mediates viral entry into host cells. Within Spike, the S2 subunit, and particularly its fusion domain, plays a critical role in merging viral and host membranes. To explore how receptor-driven Spike clustering influences this process, we investigated the self-assembly of S2 fusion peptides (FPs) and their interactions with biomimetic plasma membrane (PM) models composed of phospholipids, sphingomyelin, and cholesterol. Atomic force microscopy, laser direct infrared spectroscopy, neutron reflectometry, and grazing-incidence X-ray diffraction reveal that FPs form supramolecular assemblies that exclude cholesterol-rich nanodomains, increase membrane fluidity, and disrupt raft-like order associated with ACE2 binding. The appearance of spiral FP fibers supports a loaded-spring mechanism for membrane remodeling, offering a model for cooperative peptide-driven fusion, highlighting opportunities for antiviral and nanobiotechnological applications., The authors thank the Institute Laue-Langevin (ILL) for allocation of neutron beam time on FIGARO (https://doi.org/10.5291/ILL-DATA.DIR-215) and the European Synchrotron Radiation Facility (ESRF) for provision of synchrotron radiation facilities in beamline ID10 under proposal number LS3159 (https://doi.org/10.15151/ESRF-ES-883953841). We acknowledge O. Konovalov for his valuable assistance during the GIXD experiments. A.M. acknowledge the financial support from MCIN/AEI/10.13039/501100011033 under grants PID2021-129054NA-I00 and PID2024-157988NB-I00, as well as the financial support from the Department of Education of the Basque Government under grant PIBA_2023_1_0054 and from the IKUR Strategy under the collaboration agreement between Ikerbasque Foundation and Materials Physics Center. E.G. acknowledge the financial support from MCIN/AEI/10.13039/501100011033 under grant PID2023-147156NB-I00 and UCM under grant PR12/24-31566 (Ayudas para la financiación de proyectos de investigación UCM 2023). AAF is grateful for support from the Provincial Council of Gipuzkoa under the program Fellow Gipuzkoa, the “Ramón y Cajal” Program, Grant No. RYC2024-050339-I funded by MICIU/AEI/10.13039/501100011033 and ESF + , as well as from the project PID2024-157277NA-I00 funded by MICIU/AEI /10.13039/501100011033 and FEDER, UE., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mesoporous thin film architectures: Addressing material demands through molecular self-assembly

  • Alvarez-Fernandez, Alberto
  • Maiz, Jon
  • Faustini, Marco
  • Stefik, Morgan
  • Soler-Illia, Galo J.A.A.
  • Guldin, Stefan
[Conspectus] Mesoporous thin films spark interest across a wide range of disciplines due to their tunable nanostructures, large internal surface areas, and strong compatibility with planar optical, electronic, and microfluidic devices. While attention in the porous materials community has shifted toward macroporous or disordered nanoporous systems, a resurgence in mesoporous thin film research is underway, driven by new molecular self-assembly methods, advanced materials chemistry, and improved characterization techniques. The integration of high-χN block copolymer design, kinetically persistent micelle templating, and postdeposition processing protocols now allows control over structural parameters such as pore size, wall thickness, porosity, and connectivity. These advances have overcome many of the thermodynamic and processing constraints that previously limited widespread adoption. Rather than serving only as high-surface-area supports, mesoporous thin films are engineered as active interfaces where responsive chemistries and nanoscale confinement act in tandem. Embedding switchable ligands, thermoresponsive polymers, redox mediators, or ion-selective groups directly within the pore walls enables real-time control over transport, optical, and electrochemical properties. These capabilities open up new directions in adaptive coatings, gated membranes, and fast-response biosensors. To further expand their functional scope, mesoporous films are integrated into hierarchical and multicomponent architectures. Techniques such as triblock terpolymer templating, crack-directed assembly, and nanoimprint lithography allow for control over spatial organization on the micron and submicron scale and pore system orientation. This enables programmable anisotropy, enhanced molecular diffusion, and wavelength-selective photonic behavior, essential for next-generation sensing, catalysis, and energy applications. Such structural and functional complexity requires equally sophisticated characterization. Multimodal and in situ techniques can track material dynamics under operational conditions. Recent progress includes extended-range ellipsometric porosimetry (EP) for hierarchical architectures, vacuum EP for interface energetics, time-resolved EP for diffusion kinetics, and correlative AFM-SAXS mapping. The introduction of advanced neutron-based spectroscopies, particularly quasielastic neutron scattering (QENS), promises to provide real-time access to ion transport dynamics and segmental motion under nanoscale confinement, offering a path toward deeper mechanistic understanding of structure-performance correlations in mesoporous systems. This Account reflects the technical advances made and the interdisciplinary collaborations that have shaped our collective vision. The particular dimensions of mesopores enable us to subtly tune interactions at the molecular, interfacial, and mesoscopic levels that permit us to harness nanoconfinement. What emerges is a versatile, modular platform capable of chemical gating, energy transduction, and sensing with a level of tunability unmatched by other porous materials. We highlight critical challenges including the need for more robust large-area processing, a deeper understanding of dynamic behavior under cycling, and better integration with device-level architectures. Our strategies support the transition of mesoporous thin films into active high-performance components in next-generation energy, environmental, and biomedical systems., A.A.-F. is grateful for support from the Provincial Council of Gipuzkoa through the Fellow Gipuzkoa program. A.A.-F. and J.M. acknowledge support from the “Ramón y Cajal” Program, Grant No. RYC2024-050339-I and RYC2023-044285-I, respectively, funded by MICIU/AEI/10.13039/501100011033 and ESF+, as well as from the project PID2024-157277NA-I00 funded by MICIU/AEI/10.13039/501100011033 and FEDER, UE. M.F. is grateful for support from the European Research Council under the European Union’s Horizon 2020 Programme (Grant Agreement no. 803220). M.S. acknowledges DOE support (DE-SC0023377). G. J. A. A. S. I. acknowledges support from Agencia I+D+I (PICT 2020-03130, NANOQUIMISENS Network #087) and AFOSR (AWARD NO. FA9550-24-1-0209)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning segmental dynamics of PVDF in blends with linear precursors and single-chain nanoparticles: Insights from broadband dielectric spectroscopy

  • Gomez-Menendez, Manuel
  • Stavropoulou, Vasiliki-Maria
  • Asenjo-Sanz, Isabel
  • Pomposo, José A.
  • Verde-Sesto, Ester
  • Arrese-Igor, Silvia
  • Maiz, Jon
Data will be made available on request., The dynamic behavior of poly(vinylidene fluoride) (PVDF) in blends with either a PMMA-based linear precursor copolymer or its single-chain nanoparticle (SCNP) counterpart was investigated using broadband dielectric spectroscopy (BDS) over 125–500 K. Structural and thermal characterization revealed that both the precursor and SCNP components remain glassy under these conditions, while PVDF exhibits active segmental mobility near its α-relaxation. In PVDF-rich blends, SCNPs induce phase separation, preserving the intrinsic α- and β-relaxations of PVDF, whereas the linear precursor promotes partial mixing, attenuating the α-relaxation and lowering the apparent glass transition temperature (Tg) due to the surrounding glassy component. At intermediate and low PVDF contents, both blend types exhibit more complex relaxation spectra, reflecting enhanced interfacial interactions and confinement effects. Analysis of the characteristic relaxation times shows that the activation energy (Ea) of the secondary relaxation increases with the fraction of precursor or SCNPs, indicating hindered local motions due to interfacial constraints or nanoconfinement. Overall, the precursor and SCNP components modulate PVDF dynamics via distinct mechanisms: partial miscibility and dynamic coupling for the precursor, and nanoscale confinement with phase separation for SCNPs, providing strategies to tune segmental dynamics in hybrid glassy polymer systems., Grant No. PID2024-157277NA-I00 funded by MICIU/AEI/10.13039/501100011033 and ERDF/EU, and financial support from Eusko Jaurlaritza (code: IT1566-22) are acknowledged. We also acknowledge the financial support received from the IKUR Strategy under the collaboration agreement between Ikerbasque Foundation and the Materials Physics Center on behalf of the Department of Science, Universities and Innovation of the Basque Government. E. V–S. and J. M. acknowledge support from the “Ramón y Cajal” Program, Grant No. RYC2022-037590-I and No. RYC2023-044285-I, funded by MICIU/AEI/10.13039/501100011033 and ESF+, respectively. I. A-S. acknowledges Grant PTA2021-021175-I, funded by MICIU/AEI/10.13039/501100011033 and ESF+., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Resolving complex multiscale structure of magneto- and electroactive polymer composites with an ionic liquid

  • Shibaev, Andrey
  • Maiz, Jon
  • Petrenko, Viktor
  • Iturrospe, Amaia
  • Fernández Maestu, Josu
  • Porro, José María
  • Barrado, Mariano
  • Casado, Laura
  • Kohlbrecher, Joachim
  • Shvets, Petr
  • Modin, Evgeny
  • Castro, Ana Sofia
  • Chuvilin, Andrey
  • Teresa, José María de
  • Correia, Daniela M.
  • Arbe, Arantxa
  • Lanceros-Mendez, Senentxu
A multiscale understanding of the structure of ionogels – nanoparticle-free polymer composites incorporating ionic liquids – is essential for enhancing their macroscopic functional properties and unlocking their potential in critical applications such as energy storage, sensing, and actuation. We establish a complete picture of the nano- and microstructuration of an ionic liquid within the matrix of a practically relevant electroactive copolymer poly(vinylidenefluoride-co-trifluoroethylene), by combining neutron scattering with cryogenic scanning electron tomography assisted by focused ion beam milling and cryogenic transmission electron microscopy with elemental analysis. We show that the ionic liquid is primarily located in the polymer amorphous phase and forms nanostructures with 10–12 nm size. It does not penetrate into the crystalline lamellae or the polymer amorphous phase confined between them, and it does not affect the polymer degree of crystallinity nor its complete crystallization in the highly electroactive β-phase. Saturation of the unconfined amorphous phase with ionic liquid is identified as the key factor enabling high ionic conductivity while preserving mechanical integrity. At high ionic liquid concentrations, its excess microphase-separates during the composite processing and accumulates in predominantly interconnected micrometer-sized pores, providing the magnetoelectric response and further increasing the ionic conductivity., This study forms part of the Advanced Materials program and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1), financial support received from the IKUR Strategy under the collaboration agreement between Ikerbasque Foundation and the BCMaterials on behalf of the Department of Science, Universities and Innovation of the Basque Government are acknowledged. This work was also supported by the Basque Government under the Elkartek program. Funding by project PID2022-138572OB-C42, funded by MCIN/AEI/10.13039/501100011033/FEDER, UE, is also acknowledged. J.M., A.I.I., and A.A. acknowledge the grant of Eusko Jaurlaritza, code: IT1566-22. J.M. and J. M. P. acknowledge support from the “Ramón y Cajal” Program, Grant No. RYC2023-044285-I and No. RYC2023–044841-I, respectively, funded by MICIU/AEI/10.13039/501100011033 and ESF+. J. M. also acknowledges funding from Grant No. PID2024-157277NA-I00, provided by MICIU/AEI/10.13039/501100011033 and ERDF/EU. J.M.D.T acknowledges support from grants PID2023-146451OB-I00 and CEX2023-001286-S, funded by MCIN/AEI/10.13039/501100011033, and from grant PIE 202660E127, funded by CSIC. This work was supported by the Portuguese Foundation for Science and Technology (FCT) in the framework of the Strategic Funding UID/00686/2025: Chemistry Centre of the University of Minho (CQ-UM) (DOI: https://doi.org/10.54499/UID/00686/2025) and UID/04650/2025: Physics Centre of Minho and Porto Universities (CF-UM-UP) (DOI: https://doi.org/10.54499/UID/04650/2025). The project COMPETE2030-FEDER-00760700, nº16437 is also acknowledged. D.M.C. and A.S.C. also thanks the FCT for financial support in the framework of the contract 2020.02915.CEECIND/CP1600/CT0029 (DOI: https://doi.org/10.54499/2020.02915.CEECIND/CP1600/CT0029) (D.M.C.), and the fellowship 2024.01433.BD (A.S.C). The authors acknowledge the use of instrumentation as well as the technical advice provided by the national Facility ELECMI ICTS node “Laboratorio de Microscopías Avanzadas” at the University of Zaragoza. The authors also thank the technical and human support provided by SGIker (EHU/ERDF, EU)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Resolving Complex Multiscale Structure of Magneto‐ and Electroactive Polymer Composites With an Ionic Liquid

  • Shibaev, Andrey
  • Maiz, Jon
  • Petrenko, Viktor
  • Iturrospe, Amaia
  • Fernández Maestu, Josu
  • Porro, José María
  • Barrado, Mariano
  • Casado, Laura
  • Kohlbrecher, Joachim
  • Shvets, Petr
  • Modin, Evgeny
  • Castro, Ana Sofia
  • Chuvilin, Andrey
  • De Teresa, José María
  • Correia, Daniela M.
  • Arbe, Arantxa
  • Lanceros-Méndez, Senentxu
A multiscale understanding of the structure of ionogels – nanoparticle-free polymer composites incorporating ionic liquids – is essential for enhancing their macroscopic functional properties and unlocking their potential in critical applications such as energy storage, sensing, and actuation. We establish a complete picture of the nano- and microstructuration of an ionic liquid within the matrix of a practically relevant electroactive copolymer poly(vinylidenefluoride-co-trifluoroethylene), by combining neutron scattering with cryogenic scanning electron tomography assisted by focused ion beam milling and cryogenic transmission electron microscopy with elemental analysis. We show that the ionic liquid is primarily located in the polymer amorphous phase and forms nanostructures with 10–12 nm size. It does not penetrate into the crystalline lamellae or the polymer amorphous phase confined between them, and it does not affect the polymer degree of crystallinity nor its complete crystallization in the highly electroactive β-phase. Saturation of the unconfined amorphous phase with ionic liquid is identified as the key factor enabling high ionic conductivity while preserving mechanical integrity. At high ionic liquid concentrations, its excess microphase-separates during the composite processing and accumulates in predominantly interconnected micrometer-sized pores, providing the magnetoelectric response and further increasing the ionic conductivity.