Pasar al contenido principal

Nanostructured materials for advanced optoelectronic devices and biosensing

RYC2024-050339-I

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Recursos Humanos
Subprograma Subprograma Estatal de Formación, Atracción y Retención del Talento Investigador e Innovador
Convocatoria Ramón y Cajal
Año convocatoria 2024
Plan Estatal 2024-2027 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Engineering surface chemistry to enhance ferroelectric phase formation in ultrathin PVDF-TrFE films

  • Mosquera-Vallin, Andres
  • Hemmerle, Arnaud
  • Maiz, Jon
  • Alvarez-Fernandez, Alberto
The development of flexible, lightweight electronic devices has driven growing interest in ferroelectric polymers, with a focus on poly(vinylidene fluoride-trifluoroethylene) (PVDF-TrFE) copolymers. These materials offer solution processability, mechanical flexibility, and high remanent polarization, making them well-suited for applications in sensors, nonvolatile memories, and energy harvesters. However, as film thickness is reduced below 50 nm, crystallization becomes increasingly sensitive to interfacial interactions, leading to variations in phase composition and surface morphology. This work investigates how controlled modifications to substrate surface chemistry influence the crystallization behavior of ultrathin PVDF-TrFE films. To this end, polymer brushes of varying polarity were grafted onto silicon oxide substrates to create a systematic gradient in surface energy, spanning from hydrophilic to hydrophobic regimes. PVDF-TrFE copolymers with VDF:TrFE ratios of 80:20, 75:25, and 70:30 were spin-coated onto these surfaces to produce uniform films with thicknesses below 50 nm. Ellipsometry and contact-angle measurements were used to confirm brush coverage and film thickness. Crystalline phase composition was quantified using attenuated total reflectance Fourier-transform infrared spectroscopy (ATR-FTIR) and grazing-incidence wide-angle X-ray scattering (GIWAXS), while atomic force microscopy (AFM) was employed to characterize nanoscale surface topography. Results demonstrate that both brush chemistry and copolymer composition significantly affect β-phase content and crystalline texture. Hydrophobic surfaces consistently promoted superior film coverage, larger crystalline domains, and higher electroactive β-phase content compared to hydrophilic counterparts. These findings provide a detailed framework for controlling phase behavior and morphology in nanoconfined PVDF-TrFE films. By controlling the interface rather than the material itself, this study offers a simple and effective strategy for improving ultrathin ferroelectric films, providing useful design guidelines for flexible electronics and opening new directions for research in nanoscale polymer engineering., The authors acknowledge SOLEIL for the allocation of beamtime on the SIRIUS beamline under proposal No. 99250162. A.A.-F. and J.M. acknowledge support from the “Ramón y Cajal” Program, Grant Nos. RYC2024-050339-I and RYC2023-044285-I, respectively, funded by MICIU/AEI/10.13039/501100011033 and ESF+, as well as from the project PID2024-157277NA-I00 funded by MICIU/AEI/10.13039/501100011033 and FEDER, UE. The authors also acknowledge the financial support received from the IKUR Strategy under the collaboration agreement between Ikerbasque Foundation and the Materials Physics Center on behalf of the Department of Science, Universities and Innovation of the Basque Government. A.M-V. is grateful for the financial support received from the Materials Physics Center (MPC) through the MPC master’s thesis grant program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Insights into the self-assembly and interaction of Sars-Cov-2 fusion peptides with biomimetic plasma membranes

  • Pawar, Nisha
  • Santamaria, Andreas
  • Romano, Brígida
  • Batchu, Krishna C.
  • Laux, Valérie
  • Guzmán, Eduardo
  • Zaccai, Nathan R.
  • Alvarez-Fernandez, Alberto
  • Maestro, Armando
First identified in late 2019, the COVID-19 pandemic, caused by the SARS-CoV-2 coronavirus, rapidly escalated into a global health crisis. SARS-CoV-2 is a single-stranded RNA virus encased in a lipid envelope that houses key structural proteins, including the Spike glycoprotein, which mediates viral entry into host cells. Within Spike, the S2 subunit, and particularly its fusion domain, plays a critical role in merging viral and host membranes. To explore how receptor-driven Spike clustering influences this process, we investigated the self-assembly of S2 fusion peptides (FPs) and their interactions with biomimetic plasma membrane (PM) models composed of phospholipids, sphingomyelin, and cholesterol. Atomic force microscopy, laser direct infrared spectroscopy, neutron reflectometry, and grazing-incidence X-ray diffraction reveal that FPs form supramolecular assemblies that exclude cholesterol-rich nanodomains, increase membrane fluidity, and disrupt raft-like order associated with ACE2 binding. The appearance of spiral FP fibers supports a loaded-spring mechanism for membrane remodeling, offering a model for cooperative peptide-driven fusion, highlighting opportunities for antiviral and nanobiotechnological applications., The authors thank the Institute Laue-Langevin (ILL) for allocation of neutron beam time on FIGARO (https://doi.org/10.5291/ILL-DATA.DIR-215) and the European Synchrotron Radiation Facility (ESRF) for provision of synchrotron radiation facilities in beamline ID10 under proposal number LS3159 (https://doi.org/10.15151/ESRF-ES-883953841). We acknowledge O. Konovalov for his valuable assistance during the GIXD experiments. A.M. acknowledge the financial support from MCIN/AEI/10.13039/501100011033 under grants PID2021-129054NA-I00 and PID2024-157988NB-I00, as well as the financial support from the Department of Education of the Basque Government under grant PIBA_2023_1_0054 and from the IKUR Strategy under the collaboration agreement between Ikerbasque Foundation and Materials Physics Center. E.G. acknowledge the financial support from MCIN/AEI/10.13039/501100011033 under grant PID2023-147156NB-I00 and UCM under grant PR12/24-31566 (Ayudas para la financiación de proyectos de investigación UCM 2023). AAF is grateful for support from the Provincial Council of Gipuzkoa under the program Fellow Gipuzkoa, the “Ramón y Cajal” Program, Grant No. RYC2024-050339-I funded by MICIU/AEI/10.13039/501100011033 and ESF + , as well as from the project PID2024-157277NA-I00 funded by MICIU/AEI /10.13039/501100011033 and FEDER, UE., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mesoporous thin film architectures: Addressing material demands through molecular self-assembly

  • Alvarez-Fernandez, Alberto
  • Maiz, Jon
  • Faustini, Marco
  • Stefik, Morgan
  • Soler-Illia, Galo J.A.A.
  • Guldin, Stefan
[Conspectus] Mesoporous thin films spark interest across a wide range of disciplines due to their tunable nanostructures, large internal surface areas, and strong compatibility with planar optical, electronic, and microfluidic devices. While attention in the porous materials community has shifted toward macroporous or disordered nanoporous systems, a resurgence in mesoporous thin film research is underway, driven by new molecular self-assembly methods, advanced materials chemistry, and improved characterization techniques. The integration of high-χN block copolymer design, kinetically persistent micelle templating, and postdeposition processing protocols now allows control over structural parameters such as pore size, wall thickness, porosity, and connectivity. These advances have overcome many of the thermodynamic and processing constraints that previously limited widespread adoption. Rather than serving only as high-surface-area supports, mesoporous thin films are engineered as active interfaces where responsive chemistries and nanoscale confinement act in tandem. Embedding switchable ligands, thermoresponsive polymers, redox mediators, or ion-selective groups directly within the pore walls enables real-time control over transport, optical, and electrochemical properties. These capabilities open up new directions in adaptive coatings, gated membranes, and fast-response biosensors. To further expand their functional scope, mesoporous films are integrated into hierarchical and multicomponent architectures. Techniques such as triblock terpolymer templating, crack-directed assembly, and nanoimprint lithography allow for control over spatial organization on the micron and submicron scale and pore system orientation. This enables programmable anisotropy, enhanced molecular diffusion, and wavelength-selective photonic behavior, essential for next-generation sensing, catalysis, and energy applications. Such structural and functional complexity requires equally sophisticated characterization. Multimodal and in situ techniques can track material dynamics under operational conditions. Recent progress includes extended-range ellipsometric porosimetry (EP) for hierarchical architectures, vacuum EP for interface energetics, time-resolved EP for diffusion kinetics, and correlative AFM-SAXS mapping. The introduction of advanced neutron-based spectroscopies, particularly quasielastic neutron scattering (QENS), promises to provide real-time access to ion transport dynamics and segmental motion under nanoscale confinement, offering a path toward deeper mechanistic understanding of structure-performance correlations in mesoporous systems. This Account reflects the technical advances made and the interdisciplinary collaborations that have shaped our collective vision. The particular dimensions of mesopores enable us to subtly tune interactions at the molecular, interfacial, and mesoscopic levels that permit us to harness nanoconfinement. What emerges is a versatile, modular platform capable of chemical gating, energy transduction, and sensing with a level of tunability unmatched by other porous materials. We highlight critical challenges including the need for more robust large-area processing, a deeper understanding of dynamic behavior under cycling, and better integration with device-level architectures. Our strategies support the transition of mesoporous thin films into active high-performance components in next-generation energy, environmental, and biomedical systems., A.A.-F. is grateful for support from the Provincial Council of Gipuzkoa through the Fellow Gipuzkoa program. A.A.-F. and J.M. acknowledge support from the “Ramón y Cajal” Program, Grant No. RYC2024-050339-I and RYC2023-044285-I, respectively, funded by MICIU/AEI/10.13039/501100011033 and ESF+, as well as from the project PID2024-157277NA-I00 funded by MICIU/AEI/10.13039/501100011033 and FEDER, UE. M.F. is grateful for support from the European Research Council under the European Union’s Horizon 2020 Programme (Grant Agreement no. 803220). M.S. acknowledges DOE support (DE-SC0023377). G. J. A. A. S. I. acknowledges support from Agencia I+D+I (PICT 2020-03130, NANOQUIMISENS Network #087) and AFOSR (AWARD NO. FA9550-24-1-0209)., Peer reviewed