Pasar al contenido principal

MATERIALES TRANSFORMADORES PARA UNA TRANSICION ENERGETICA SOSTENIBLE

PID2024-162420OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para la Investigación y el Desarrollo Experimental
Subprograma Subprograma Estatal de Generación de Conocimiento Científico-Técnico y Desarrollo Experimental
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2024
Plan Estatal 2024-2027 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDADE DE SANTIAGO DE COMPOSTELA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Hybrid ionic liquid-polyoxometalate nanoadditives for lubricants in electric vehicles

  • Giner-Rajala, Óscar
  • Vizcaíno Anaya, Lucía
  • Amigo Pombo, Alfredo José
  • López Iglesias, Enriqueta
  • Giménez López, María del Carmen
  • Fernández Pérez, Josefa
In this work, three ionic liquid cation-polyoxometalate anion hybrid nanoadditives, IL-POMs, namely, [N1,1,1,12]3[PW12O40], [C12MIM]3[PW12O40] and [C12Py]3[PW12O40], were analyzed as additives for polyalphaolefin 6 (PAO6), where [PW12O40]3- is a phosphotungstate anion, [N1,1,1,12]+ is dodecyltrimethylammonium, [C12MIM]+ is 1-dodecyl-3-methylimidazolium and [C12Py]+ is 1-dodecylpyridinium. First, the optimal concentration was determined for the tribological behavior of the nanodispersions containing [N1,1,1,12]3[PW12O40] as an additive, which was 0.1 wt%. Second, the tribological performance of the nanodispersions containing 0.1 wt% of each of the three IL-POMs as additives was compared. The nanodispersion PAO6 + 0.1 wt% [N1,1,1,12]3[PW12O40] led to the best antifriction and antiwear capabilities with reductions of 13% and 20% in friction coefficient and wear track width, respectively, compared to those of PAO6. Finally, the ionic liquid trihexyltetradecylphosphonium bis(2-ethylhexyl)phosphate, IL1, showed a synergistic effect when used as an additive together with the [N1,1,1,12]3[PW12O40] hybrid nanomaterial. Thus, reductions of 23% in friction and 87% in wear track transversal area were found when using PAO6 + 0.1 wt% [N1,1,1,12]3[PW12O40] + 1 wt% IL1 as a lubricant instead of neat PAO6. The additives at these concentrations do not significantly modified the density and viscosity of the base oil. The electrical conductivities of the nanodispersion PAO6 + 0.1 wt% [N1,1,1,12]3[PW12O40] + 1 wt% IL1 fall within the dissipative range, with a relative percentage increase of around 1800% with respect to neat PAO6.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Interfacial ruthenium–titania nanosheet engineering for highly selective electrocatalytic nitrate reduction to ammonia across a wide pH range

  • Tayyebi, Ahmad
  • Vizcaíno Anaya, Lucía
  • Pedro da Silva Jaques, João
  • Giménez López, María del Carmen
Electrocatalytic nitrate reduction (NO₃RR) is a promising strategy for simultaneous wastewater remediation and decentralized ammonia production, but requires catalysts with high activity, NH₃ selectivity, and stability. Here, we report a Ru/TiNS electrocatalyst composed of well-dispersed Ru nanoparticles on oxygen-deficient monolayer titania nanosheets (TiNS), enabling simultaneous precise control over nitrate adsorption, interfacial charge transfer, and hydrogen evolution reaction. Systematic variation of Ru loading, support, and electrolyte establishes clear structure–activity relationships. The optimized 25%Ru–TiNS catalyst achieves 120 ± 4 mA·cm⁻² at 0 V vs. RHE in alkaline electrolyte, maintaining high NH₃ selectivity across a broad pH range. Its superior performance originates from the efficient generation and utilization of active hydrogen species (H*) via enhanced water dissociation on Ru sites, which are continuously consumed by nitrate-derived intermediates stabilized on TiNS. This kinetically matched hydrogen supply–consumption process enables high Faradaic efficiency over a wide potential range while suppressing competing hydrogen evolution. Operando Raman spectroscopy reveals enhanced nitrate adsorption and interfacial water activation under cathodic potentials, evidenced by increased nitrate-related Raman bands and changes in interfacial O–H structure. Complementary DFT calculations demonstrate strong metal–support interactions and electronic coupling at the Ru–TiNS interface, promoting nitrate activation and optimizing hydrogenation energetics. As a result, 25%Ru–TiNS outperforms Ru supported on reduced graphene oxide and carbon nanotubes in both activity and selectivity. In a paired NO₃RR/OER electrolyzer, the catalyst delivers 97% NH₃ Faradaic efficiency at 1.26 V, ∼0.3 V lower than conventional water electrolysis, highlighting its potential for energy-efficient ammonia production and wastewater treatment.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

POM-Based Water Splitting Catalyst Under Acid Conditions Driven by Its Assembly on Carbon Nanotubes

  • Quirós Díez, Eugenia Pilar
  • Guillén Soler, Melanie
  • Herreros Lucas, Carlos
  • López Moreno, Alejandro
  • Vila Fungueiriño, José Manuel
  • Llamas Saiz, Antonio Luis
  • Strutyński, Karol
  • Melle Franco, Manuel
  • Giménez López, María del Carmen
Development of efficient and stable bifunctional electrocatalysts for water electrolysis under acidic conditions is essential for sustainable hydrogen production. A novel vanadium polyoxometalate (POM)-based material, Na4(H2O)12[(CH2OH)3CNH3]2[V10O28]·4H2O (1) is presented, incorporating non-innocent cations and whose electrocatalytic activity can be switched from the production of oxygen to hydrogen through its assembly on carbon nanotubes (CNT). A physical mixture (1/CNT) shows remarkable oxygen evolution reaction (OER) activity, with an overpotential of 0.34 V at 10 mA cm−2, outperforming commercial IrO2 (0.45 V) and approaching Ir/C (0.31 V), with 80% Faradaic efficiency. In contrast, directed assembly (1@CNT) unlocks TRIS ⁺= [(CH2OH)3CNH3]⁺ groups functionality, enabling high hydrogen evolution reaction (HER) efficiency, with an onset potential of −0.07 V, close to Pt/C, and 94% Faradaic efficiency. Mechanistic studies, strongly supported by in-operando confocal microscopy and theoretical calculations, reveal that the modulation of crystal interactions and the local microenvironment is key to orchestrating the OER/HER tuning. OER is proposed to proceed via an alcohol oxidation reaction (AOR), while HER benefits from TRIS⁺ moieties acting as a “proton sponge”. This work provides a compelling approach for rational design of bifunctional molecular electrocatalysts based on earth-abundant elements and controlled nanoassembly, with clear relevance for advancing green hydrogen production technologies.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Support-controlled reaction pathways via dynamic sulfur-mediated interfaces for selective urea electrolysis

  • Guillén Soler, Melanie
  • Vizcaíno Anaya, Lucía
  • Tayyebi, Ahmad
  • Vila Fungueiriño, José Manuel
  • Giménez López, María del Carmen
The development of efficient and sustainable hydrogen production technologies is critical for the transition toward carbon-neutral energy systems. Coupling the urea oxidation reaction with the hydrogen evolution reaction (HER) offers a low-energy alternative to conventional water electrolysis, but its practical implementation is limited by poor reaction selectivity and catalyst instability. Here, we report sulfur-doped graphitized carbon nanofibers (S/GNF) as an adaptive catalyst–support platform enabling dynamic catalyst–support interactions. When combined with Pd and Ni-based active phases, the system exhibits enhanced catalytic activity, stability, and control over reaction pathways. In particular, the NiSx/GNF catalyst achieves ∼92% Faradaic efficiency toward N2, significantly exceeding typical values (<40%–50%) reported for Ni-based systems. In situ Raman spectroscopy and product analysis reveal that sulfur-induced electronic modulation and enhanced water dissociation promote selective reaction pathways, while sulfur-mediated in situ reconstruction stabilizes active sites. Integration into a two-electrode electrolyzer (NiSx/GNF║Pd–S/GNF) enables hydrogen production at 1.5 V to reach 10 mA/cm2 with 91.7% Faradaic efficiency and excellent durability. Importantly, this work demonstrates that reaction pathways can be governed by dynamic catalyst–support interactions rather than catalyst composition, establishing a new design principle for controlling selectivity in electrocatalysis.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Kinetics-controlled architecture of binder-free organic electrodes for enhanced ion transport

  • Kumar, Satendra
  • Giménez López, María del Carmen
Binder-free organic electrodes offer a promising route toward efficient energy storage by eliminating inactive components and minimizing interfacial resistance; however, their performance is often limited by insufficient control over growth dynamics that govern morphology and ion transport. Here, a general electrochemical strategy is introduced to engineer binder-free organic electrodes with controlled ionic accessibility by regulating deposition kinetics. Using pyrene-derived interfaces formed via intramolecular electrochemical oxidative cyclodehydrogenation as a model system, pulse reverse electrodeposition enables dynamic interfacial reorganization, promoting homogeneous nucleation and the formation of hierarchically porous Py-derived oligomeric films directly anchored to the current collector. Multiscale characterization combining AFM, SAXS, electron microscopy, and electrochemical transport analysis establishes a direct correlation between nucleation and growth dynamics, mesoscale architecture, and ion-transport behavior. Pulse reverse synthesis yields architectures with enhanced ionic accessibility, reduced ionic transport resistance, and improved charge-transfer characteristics, resulting in stable electrochemical performance. Direct Na-ion half-cell measurements further confirm reversible sodium-storage activity in binder-free electrodes together with mixed capacitive/diffusion-controlled kinetics and good rate capability, validating the functionality of the kinetically engineered architecture. These findings establish a design principle for architected organic electrodes and provide a scalable route to engineer structure–transport relationships for sodium-ion energy-storage applications