Pasar al contenido principal

NANOMATERIALES PARA VEHICULOS ELECTRICOS: FLUIDOS DE TRANSMISION Y RECUBRIMIENTOS

PID2020-112846RB-C22

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDADE DE SANTIAGO DE COMPOSTELA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 19
Encontrada(s) 1 página(s)

Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Improving tribological efficiency of isopropyl palmitate oil with cellulose nanocrystals: a sustainable approach for high-performance lubricants

  • García Guimarey, María Jesús
  • Marcos, Marco A.
  • Vallejo, Javier P.
  • Viesca, José L.
  • Pérez Comuñas, María José
  • Lugo, Luis
  • Hernández Battez, Antolín
This article explores the potential of cellulose nanocrystals (CNCs) as a lubricant additive for isopropyl palmitate (IPP) oil to enhance its tribological performance. CNCs, derived from renewable sources, offer a sustainable and environmentally friendly alternative to traditional lubricant additives. A two-step method was used to prepare the nanolubricants, with visual control and dynamic light scattering measurements to assess their temporal stability. The viscous behavior of the nanolubricants, in terms of viscosity and viscosity index, was evaluated at different temperatures. The study assesses the effectiveness of CNC/IPP oil blends as lubricants through tribological tests, including evaluations under pure sliding and rolling–sliding conditions. Studies on worn surfaces were conducted using surface roughness analysis, Raman mapping, and XPS, and the thermal stability was examined to determine their suitability for different operating conditions. CNCs significantly reduce friction by up to 44% and improve wear resistance compared to the neat IPP base oil, presumably due to a self-repairing effect. Furthermore, an improvement of the thermal conductivity of pure IPP base oil has been revealed with increasing CNC concentration. This study enhances the understanding of cellulose nanocrystals as lubricant additives and their potential to transform traditional lubricating oils into high-performance and sustainable solutions.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Tribological improvement of low-viscosity nanolubricants: MoO3, MoS2, WS2 and WC nanoparticles as additives

  • Liñeira del Río, José Manuel
  • Fernandes, Carlos M.C.G.
  • Seabra, Jorge H.O.
The aim of this research is studying the tribological performance of MoO3, MoS2, WS2 and WC nanoparticles as additives of PAO4. Pure sliding tribological tests were performed at 120 °C, finding outstanding friction and wear reductions in comparison with the PAO4, with maximum friction reductions of 64% for the 0.1 wt% MoS2 nanolubricant and greatest wear decreases for 0.1 wt% MoS2 nanolubricant: a width reduction of 62% and a worn area decrease of 97%. Raman mapping and a roughness evaluation of the worn pins confirmed the tribofilm formation and mending as tribological mechanisms. Rolling–sliding tests were conducted with best nanolubricants performance in pure sliding, observing excellent antifriction capabilities of MoS2 nanoparticles at low speeds, indicating that the use of nanoparticles is vital in boundary lubrication.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Tribological enhancement of potential electric vehicle lubricants using coated TiO2 nanoparticles as additives

  • Liñeira del Río, José Manuel
  • Mariño Fernández, Fátima
  • López Iglesias, Enriqueta
  • Gonçalves, David E. P.
  • Seabra, Jorge H. O.
  • Fernández Pérez, Josefa
This work presents the antifriction and antiwear properties of TiO2 nanoparticles coated with oleic acid, TiO2-OA, as additives of a low viscosity polyalphaolefin base oil, PAO8. To find the optimal concentration of nanoadditives that minimize friction and wear, four PAO8 based nanodispersions were formulated: PAO8 + 0.10 wt% TiO2-OA, PAO8 + 0.25 wt% TiO2-OA, PAO8 + 0.35 wt% TiO2-OA and PAO8 + 0.50 wt% TiO2-OA. Tribological experiments were performed under pure sliding and rolling-sliding conditions at 120 °C, with the four formulated nanolubricants and with PAO8 base oil. All the nanolubricants showed lower friction coefficients than that obtained with the PAO8 base oil, reaching maximum reductions for the 0.35 wt% TiO2-OA nanolubricant, for both types of test conditions. The tribological specimens tested under pure sliding conditions with the nanolubricants showed fewer wear than those tested with PAO8, finding the highest wear decreases also with the PAO8 + 0.35 wt% TiO2-OA nanolubricant, being 26 %, 65 % and 73 %, in wear track width, depth and area, in that order. Through Raman microscopy and roughness study of the worn samples, it can be inferred that tribofilm, mending and polishing mechanisms occur. Moreover, the thermal conductivity of the optimal nanolubricant (0.35 wt%) was measured at 20, 30, 40 and 50 °C
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Effect of the addition of coated SiO2 nanoparticles on the tribological behavior of a low-viscosity polyalphaolefin base oil

  • Mariño, Fátima
  • Liñeira del Río, José Manuel
  • Gonçalves, David E.P.
  • Seabra, Jorge H.O.
  • López Iglesias, Enriqueta
  • Fernández Pérez, Josefa
This work reports tribological properties of PAO6 containing SiO2 nanoparticles modified with stearic-acid (SiO2-SA) as additives at concentrations (0.05, 0.10, 0.20, 0.30) wt% and the same concentration of SA as a dispersant. Tribological experiments were performed at 120 °C in pure sliding and rolling-sliding conditions (5% slide-to-roll ratio). All nanolubricants have better anti-friction capabilities than PAO6. The optimum concentration for friction reduction was 0.30 wt% for both tribological conditions. The best anti-wear results for the specimens tested in pure sliding conditions were achieved with PAO6 + 0.20 wt% SiO2-SA with reductions of 55%, 86% and 92%, in wear track width, wear track depth and wear area, respectively. Tribological mechanisms of the nanoparticles have been analyzed through roughness measurements, concluding that polishing, tribofilm and adsorption of the additives occur
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Tribological enhancement of low viscosity polyalphaolefin transmission oil using functionalized graphene additives

  • Liñeira del Río, José Manuel
  • Martínez Castrillón, Adrián
  • Peña Gil, Diego
  • Fernández Pérez, Josefa
Electric vehicles have intensely increased in popularity and are leading to a greener future for the automotive industry. Thus, by reducing friction in mechanical elements, tribology can increase electric vehicles driving range. In fact, the addition of nanoparticles to lubricants can greatly reduce both friction and wear of mechanical elements, due to their small size that allows them to enter the contact area, resulting in a positive lubrication effect. This fact presents main challenges, such as designing nanolubricants as potential transmission fluids with great antifriction and antiwear performance. Therefore, the target of this study is analyzing the tribological enhancement at low and high temperatures of a low viscosity polyalphaolefin when graphene oxide or modified graphene oxide nanoadditives (GO-N-DDP) are added to base oil. Nanodispersions with these components were formulated, viewing a superior temporal stability with nanolubricants of GO-N-DDP. Concerning tribological behavior, notable improvements in friction coefficient were achieved in comparison to the base oil, with a greatest decrease of 25 % for 0.05 wt% GO-N-DDP (25 °C). In terms of antiwear performance, nanolubricants containing GO-N-DDP demonstrated outstanding performance, with the greatest reductions in wear scar diameter reaching 25 % (0.05 wt% GO-N-DDP at 25 °C). The generation of tribofilm due to GO-N-DDP nanosheets was the main tribological mechanism and it was confirmed by Raman microscopy and scanning electron microscopy.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Silanized magnetite nanoparticles as an additive for an electric vehicle transmission base fluid (polyalphaolefin 6)

  • Mariño, Fátima
  • Giner-Rajala, Óscar
  • López Iglesias, Enriqueta
  • Amigo Pombo, Alfredo José
  • Fernández Pérez, Josefa
This study aims to examine the effect of particle size on stability and tribological performance of two iron oxide nanoparticles (Fe3O4 NPs), with diameters of 14 and 19 nm respectively, modified with octadecyltrichlorosilane, OTS, as lubricant additive in a polyalphaolefin (PAO6) at three concentrations (0.007, 0.015, 0.030 wt%). From the temporal evolution of the refractive index, it can be inferred that the stability times of the nanodispersions containing silanized nanoparticles are longer than those of their uncoated counterparts, increasing with NPs size. The optimal concentration for both nanoparticle sizes was 0.015 wt%. The PAO6 + 0.015 wt% Fe3O4-OTS (19 nm) nanodispersion led to wear reductions of up to 59 % (longitudinal sectional area), compared to that of PAO6. The tribological mechanism likely involves the formation of a tribofilm and the mending effect. Measurements of density and three transport properties of nanolubricants at the optimum concentration show no significant variation compared to those of PAO6.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

2D mica as a new additive for nanolubricants with high tribological performance

  • García Guimarey, María Jesús
  • Karunarathne, Shadeepa
  • Ratwani, Chirang R.
  • Luis Viesca, Jose
  • Hernández Battez, A.
  • Abdelkader, Amr M.
This article presents 2D mica nanoplatelets as a novel additive to produce a stable engine lubricant. The planar structure and excellent mechanical properties of 2D mica contribute significantly to the improvements in tribological performance when evaluated under pure sliding and rolling/sliding contact configurations. The wear rate is reduced by 72 %, and the coefficient of friction (COF) decreases by 28 % when 2D mica is added to engine oil under pure sliding conditions. No tribological improvement was observed under rolling/sliding conditions. Our results also showed that nanosheet loading plays a significant role in nanolubricant performance, where 0.2 wt% is the optimum. These findings demonstrate superior performance to other 2D material nanoadditives and indicate the potential for commercial applications of 2D mica-based nanolubricants.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Tribological improvement of potential lubricants for electric vehicles using double functionalized graphene oxide as additives

  • Liñeira del Río, José Manuel
  • Alonso Pérez, Gabriel
  • Martínez, Adrián
  • Peña Gil, Diego
  • Fernández, Josefa
The aim of the present research is to analyze thermophysical and tribological properties of PAO4 nanolubricants containing functionalized (GO-polyethyleneimine-oleic acid, GO-PEI-OA) and non-functionalized (GO) graphene oxide. Nanodispersions of these NPs were prepared, observing a better stability for the GO-PEI-OA nanolubricants. As for the tribological properties, significant improvements in coefficient of friction were obtained comparing with the base oil, being 28% for GO-PEI-OA (0.10 wt%). Concerning the anti-wear behavior, better results were obtained for GO-PEI-OA nanolubricants (0.15 wt%) with improvements of about 27%, 54% and 60% for the diameter, depth, and area of the wear track, respectively. Finally, Raman spectroscopy and surface roughness measurements were used to identify the tribological mechanisms of tribofilm formation and repairing.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Hybrid ionic liquid-polyoxometalate nanoadditives for lubricants in electric vehicles

  • Giner-Rajala, Óscar
  • Vizcaíno Anaya, Lucía
  • Amigo Pombo, Alfredo José
  • López Iglesias, Enriqueta
  • Giménez López, María del Carmen
  • Fernández Pérez, Josefa
In this work, three ionic liquid cation-polyoxometalate anion hybrid nanoadditives, IL-POMs, namely, [N1,1,1,12]3[PW12O40], [C12MIM]3[PW12O40] and [C12Py]3[PW12O40], were analyzed as additives for polyalphaolefin 6 (PAO6), where [PW12O40]3- is a phosphotungstate anion, [N1,1,1,12]+ is dodecyltrimethylammonium, [C12MIM]+ is 1-dodecyl-3-methylimidazolium and [C12Py]+ is 1-dodecylpyridinium. First, the optimal concentration was determined for the tribological behavior of the nanodispersions containing [N1,1,1,12]3[PW12O40] as an additive, which was 0.1 wt%. Second, the tribological performance of the nanodispersions containing 0.1 wt% of each of the three IL-POMs as additives was compared. The nanodispersion PAO6 + 0.1 wt% [N1,1,1,12]3[PW12O40] led to the best antifriction and antiwear capabilities with reductions of 13% and 20% in friction coefficient and wear track width, respectively, compared to those of PAO6. Finally, the ionic liquid trihexyltetradecylphosphonium bis(2-ethylhexyl)phosphate, IL1, showed a synergistic effect when used as an additive together with the [N1,1,1,12]3[PW12O40] hybrid nanomaterial. Thus, reductions of 23% in friction and 87% in wear track transversal area were found when using PAO6 + 0.1 wt% [N1,1,1,12]3[PW12O40] + 1 wt% IL1 as a lubricant instead of neat PAO6. The additives at these concentrations do not significantly modified the density and viscosity of the base oil. The electrical conductivities of the nanodispersion PAO6 + 0.1 wt% [N1,1,1,12]3[PW12O40] + 1 wt% IL1 fall within the dissipative range, with a relative percentage increase of around 1800% with respect to neat PAO6.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Multifunctional steel surface through the treatment with graphene and h-BN

  • García Guimarey, María Jesús
  • Ratwani, Chirag R.
  • Xie, Kaiyu
  • Koohgilani, Mehran
  • Hadfield, Mark
  • Kamali, Ali Reza
  • Abdelkader, Amor M.
The search for improved surface properties of engineering alloys is always a matter of interest. Herein, we introduce a surface treatment based on depositing a non-continuous layer of two-dimensional (2D) nanomaterials via a simple and scalable method. 2D nanosheets of hexagonal boron nitride (h-BN) and graphene nanoplatelets (GNP) were sprayed on mild steel, followed by mild heat treatment. The nanosheets are strongly attached to the surfaces and even diffused to submicron under the surface, as proved by various analytical techniques. The mechanical, tribological and corrosion evaluations show significant simultaneous enhancement in a set of surface properties. From the friction tests with sliding steel-steel tribo-pairs under dry conditions, the graphene treatment decreases the friction coefficient and wear area by 21% and 31%, respectively. Interestingly, it is revealed that under dry and lubricated conditions, graphene-doped h-BN exhibits outstanding anti-wear properties synergistically compared to stand-alone 2D materials. The possible wear mechanism is investigated and found to be based on the formation of a tribofilm
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Tribological improvement using Ti3C2Tx MXenes and/or CaCO3 nanoparticles as lubricant additives

  • Liñeira del Río, José Manuel
  • Moreda Piñeiro, Antonio
  • López Iglesias, Enriqueta
  • Fernández Pérez, Josefa
The main goal of this work is the tribological characterization of low viscosity nanolubricants, PAO8 base oil containing Ti3C2Tx MXenes and/or functionalized CaCO3 (CaCO3-OA) nanoparticles as additives. Friction enhancements were reached with CaCO3-OA nanolubricants with maximum reductions of 44 % for the optimal concentration of 0.10 wt% CaCO3-OA. With respect to wear, significant improvements in antiwear performance were achieved with maximum reductions in wear width of 27 % (0.15 wt% CaCO3-OA), 14 % (0.10 wt% Ti3C2Tx) and 13 % for hybrid (0.10 wt% CaCO3-OA/Ti3C2Tx) nanolubricants. Confocal Raman microscopy was utilized to recognize the mechanisms that govern tribological improvement: tribofilm formation for Ti3C2Tx nanosheets and tribofilm formation and self-repairing for CaCO3-OA nanoparticles.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Improvement of the lubrication performance of an ester base oil with coated ferrite nanoadditives for different material pairs

  • García Guimarey, María Jesús
  • Liñeira del Río, José Manuel
  • Fernández Pérez, Josefa
In the present work, lubrication properties (friction and wear) of a synthetic ester oil, tris(2-ethylhexyl) trimellitate (TOTM) containing ferrite nanoparticles coated with oleic acid (F3O4-OA) were investigated for two different material pairs: steel ball-steel disc and silicon nitride ball-steel disc. Thus, four TOTM nanolubricants were formulated: TOTM + 0.010 wt% Fe3O4-OA, TOTM + 0.015 wt% Fe3O4-OA, TOTM + 0.020 wt% Fe3O4-OA and TOTM + 0.025 wt% Fe3O4-OA showing all of them a moderate time stability due to the oleic acid coating. Wettability behaviour of the ferrite-based nanolubricants on steel surface was analysed, revealing that the addition of Fe3O4-OA nanoparticles in TOTM decreases the contact angle between the steel surface and TOTM lubricant surface. Friction sliding tests were performed with the neat TOTM and with the formulated nanolubricants under a 20 N of load. All nanolubricants showed lower coefficients of friction than those reached with TOTM base oil for both material pairs. Worn area was significantly reduced for all Fe3O4-OA concentrations in the steel-steel contact and for the highest concentrations in the silicon nitride-steel contact. Specifically, the largest achieved reductions were for the TOTM + 0.010 wt% F3O4-OA nanolubricant: 43% reduction in friction (silicon nitride-steel) and reductions of 17% in wear track width, 42% in wear track deep and 36% in area (steel-steel). In addition, roughness analysis and Raman microscopy of the tested discs showed that tribofilm formation and surface repairing mechanisms occur
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Chemically modified nanomaterials as lubricant additive: time stability, friction, and wear

  • Mariño Fernández, Fátima
  • López Iglesias, Enriqueta
  • Fernández Pérez, Josefa
  • Liñeira del Río, José Manuel
This work reviews the results on the temporal stability of nanodispersions containing chemically modified nanoadditives: carbon-based nanomaterials, metals, metal oxides, metal sulfides, nanocomposites, among others. Morphology, size, coating type and concentration of the NPs as well as the viscosity of the base oil are the main characteristics that affect stability. Coated spherical NPs with mean diameter lower than 20 nm are the most common among those which led to nanolubricants with stabilities longer than two months. The tribological results of the nanolubricants with stabilities higher than one month are also reviewed. Regardless the base oil, chemically modified nanoparticles reduced wear more than friction, reaching reductions of friction up to 75% and wear volume up to 99%. As for the tribological mechanisms involving chemically modified nanoparticles, the formation of adsorbed or tribochemical reaction films on worn surfaces were reported more often
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Lubricant properties of a polyalphaolefin oil additivated with zirconia and ceria-zirconia nanoparticles

  • García Guimarey, María Jesús
  • Castro Currás, Arturo
  • Liñeira del Río, José Manuel
  • Pérez Comuñas, María José
In this work zirconia (ZrO2) and hybrid ceria-zirconia (CeO2-ZrO2) nanoparticles are used for the first time as lubricant additives of the PAO8 base oil (low-viscosity polyalphaolefin oil) at concentrations from 0.05 wt% to 0.20 wt%. Thermophysical properties of the eight formulated nanolubricants were experimentally determined observing that the presence of these nanoadiditves not significantly alter the volumetric behaviour of neat PAO8. On the contrary, the presence of CeO2-ZrO2 in formulation increases the viscosity of the base oil by up to 13 %. Tribological tests were performed under pure sliding conditions at 393.15 K at a load of 20 N using a ball-on-three-pin rotational tribometer. Moreover, the wear was quantified with a 3D optical profilometer. Nanolubricants with zirconia nanoparticles exhibited superior characteristics in terms of stability, antifriction and anti-wear properties than those formulated with hybrid ceria-zirconia nanoparticles. The best tribological behaviour was obtained with 0.05 wt% ZrO2, thus reductions of 13 % in friction coefficient and of 73 % in the worn area were obtained. The results obtained have been compared with those previously reported for the same base oil (PAO8) and other types of nanoadditives. Finally, surface roughness analysis, Raman microscopy and SEM-EDX were used to analyse the wear mechanism produced by zirconia and hybrid ceria-zirconia nanoparticles.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Recent studies on nanomaterials as additives to lubricants under electrified conditions for tribology: review

  • Nasser, Khodor
  • García Guimarey, María Jesús
  • Pereira, Neuma das Mercês
The tribological performance of nanolubricants in electric drivetrains has gained attention due to the rapid growth of electric vehicles. Nanomaterials, especially those with high thermal conductivity and low electrical conductivity, are favored as lubricant additives for use in electrical conditions. Low-viscosity lubricants, known for their good thermal conductivity, are increasingly being considered for electric powertrains. Combining appropriate nanomaterials with lubricants can optimize nanolubricants for electric drivetrains, with stability, tribocorrosion, and electro-viscosity being key factors. Traditional tribometers, when modified to apply external electrical power, allow testing of nanolubricants under electrical conditions, providing insights into their behavior with positive and/or negative electrical charges. To achieve accurate and stable results, tribological test systems must be adapted, requiring well-isolated rigs for controlled data collection. This adaptation enables a better understanding of the interaction between nanomaterials and surfaces under lubrication. This paper reviews studies that use modified tribometers to analyze nanolubricant performance under mechanical and electrical conditions and explores the effects of electrical and thermal factors on lubricant properties, nanomaterials, and their mechanisms under triboelectric conditions.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Synergistic effects of functionalized WS2 and SiO2 nanoparticles and a phosphonium ionic liquid as hybrid additives of low-viscosity lubricants

  • Liñeira del Río, José Manuel
  • Fernandes, Carlos M.C.G.
  • Gonçalves, David E.P.
  • Seabra, Jorge H.O.
This research shows the antifriction and antiwear synergies between a phosphonium ionic liquid (IL) and f-WS2 and f-SiO2 nanoparticles (NPs) as additives of a base oil with low viscosity (PAO6). Mass concentrations of 0.1 wt% nanoadditives and 1% IL were selected to formulate the nanolubricants. Pure sliding and rolling–sliding friction tests were performed at 120 °C, finding great friction reductions in comparison with the PAO6 base oil, specifically for the double hybrid nanolubricant (PAO6 + 1 wt% IL + 0.1 wt% f-WS2 + 0.1 wt% f-SiO2). Regarding the wear produced, the greatest antiwear behavior was also achieved for the double hybrid nanolubricant (width reduction of 48% and worn area decrease of 84%). Furthermore, by means of Raman microscopy and roughness examination of the worn surfaces, it can be proposed that the lubrication mechanism of doubled hybrid nanolubricants could be supported by the adsorbed tribofilm (IL and f-WS2) as well as the mending effects (f-WS2 and f-SiO2).
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Tribological performance of a paraffinic base oil additive with coated and uncoated SiO2 nanoparticles

  • Liñeira del Río, José Manuel
  • García Guimarey, María Jesús
  • Somoza, Vanesa
  • Mariño, Fátima
  • Pérez Comuñas, María José
Electric vehicles (EVs) have emerged as a technology that can replace internal combustion vehicles and reduce greenhouse gas emissions. Therefore, it is necessary to develop novel low-viscosity lubricants that can serve as potential transmission fluids for electric vehicles. Thus, this work analyzes the influence of both SiO2 and SiO2-SA (coated with stearic acid) nanomaterials on the tribological behavior of a paraffinic base oil with an ISO VG viscosity grade of 32 and a 133 viscosity index. A traditional two-step process through ultrasonic agitation was utilized to formulate eight nanolubricants of paraffinic oil + SiO2 and paraffinic base oil + SiO2-SA with nanopowder mass concentrations ranging from 0.15 wt% to 0.60 wt%. Visual control was utilized to investigate the stability of the nanolubricants. An experimental study of different properties (viscosity, viscosity index, density, friction coefficient, and wear) was performed. Friction analyses were carried out in pure sliding contacts at 393.15 K, and a 3D optical profilometer was used to quantify the wear. The friction results showed that, for the SiO2-SA nanolubricants, the friction coefficients were much lower than those obtained with the neat paraffinic base oil. The optimal nanoparticle mass concentration was 0.60 wt% SiO2-SA, with which the friction coefficient decreased by around 43%. Regarding wear, the greatest decreases in width, depth, and area were also found with the addition of 0.60 wt% SiO2-SA; thus, reductions of 21, 22, and 54% were obtained, respectively, compared with the neat paraffinic base oil.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Thermophysical properties of n‑alkyl‑ammonium nitrate ionic liquids (n=2,3,4) pure and water saturated for energy applications

  • Parajó Vieito, Juan José
  • Vallet Moreno, Pablo
  • García Guimarey, María Jesús
  • Santiago Alonso, Antía
  • Teijeira Pernas, Tamara
  • Amigo Pombo, Alfredo José
  • Varela Cabo, Luis Miguel
  • Salgado Carballo, Josefa
  • Villanueva López, María
Phase transition temperatures of three ionic liquids (ILs) with ammonium cations of different alkyl chain length and nitrate common anion were determined in this paper by differential scanning calorimetry. Thermal stability of these ILs in air and nitrogen atmosphere and the maximum operation temperatures of the compounds were also studied using a thermogravimetric analyser. Furthermore, thermophysical properties as density, viscosity, thermal conductivity, and heat capacity against temperature of these pure ionic liquids were determined and compared with the corresponding values for water saturated samples. For this purpose, different techniques were employed: for density and viscosity a rotational automated viscodensimeter; for thermal conductivity measurements a thermal conductimeter that follows the transient hot-wire method; and for heat capacity measurements a microdifferential scanning calorimeter. Different behaviours were observed depending on the analysed thermophysical properties. In case of dried samples, density and thermal conductivity decrease with alkyl chain; for saturated samples, same tendency is observed for density but is the opposite in case of thermal conductivity. Isobaric specific heat and viscosity increase with alkyl chain length in case of dried samples; for saturated samples same tendency is observed for the viscosity, whereas the tendency is the contrary in case of isobaric specific heat
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Tribological enhancement using Mn3O4-Graphene nanocomposites as additives for potential transmission fluids of electric vehicles

  • Liñeira del Río, José Manuel
  • Rial Silva, Ramón
  • López Iglesias, Enriqueta
  • Fernández Pérez, Josefa
This research reports the antifriction and antiwear properties of Mn3O4-Graphene nanocomposites (Mn3O4-G) as additives of a paraffinic base oil commonly used in the formulation of electric vehicles transmission oils, G-III base oil. Four G-III base oil nanodispersions have been designed, G-III base oil + 0.025 wt% Mn3O4-G, G-III base oil + 0.050 wt% Mn3O4-G, G-III base oil + 0.075 wt% Mn3O4-G and G-III base oil + 0.100 wt% Mn3O4-G, to know the optimal concentration of nanoadditive. Tribological experiments were carried out with these nanolubricants and with neat G-III base oil at pure sliding conditions under a working load of 9.43 N. All tested nanolubricants led to similar friction coefficients in comparison to that obtained using G-III base oil. Tribological specimens tested with formulated nanolubricants revealed less wear than that obtained with G-III base oil, obtaining the greatest wear reduction using the G-III base oil + 0.075 wt% Mn3O4-G nanolubricant, with reductions of 25, 50 and 64% in wear scar diameter, maximum depth and transversal area, respectively. Moreover, by means of confocal Raman microscopy and roughness evaluation of worn tribological specimens, it was concluded that synergetic effect, tribofilm formation and rolling mechanisms happen