Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Artículo científico (JournalArticle)

Bending tests on building beams containing electric arc furnace slag and alternative binders and manufactured with energy-saving placement techniques

  • Santamaría, Amaia
  • García Llona, Aratz
  • Revilla Cuesta, Víctor
  • Piñero Santiago, Ignacio
  • Ortega López, Vanesa
The environmental impact of the building sector is especially relevant during the construction phase. Both the materials and the construction methods that are currently in use must be reconsidered, in order to minimize the environmental impact of concrete-based structures. This research is therefore focused on achieving greener concrete-based building structures. In this context, the feasibility of careful use of materials for concrete manufacture and the use of construction techniques that can facilitate and reduce energy consumption during placement are both studied. To do so, twelve sample beams were prepared using eight different sustainable high-workability structural concretes. The aim was to maximize the use of the by-products that amounted to over 80% of the concrete mass, steelmaking slags, fly ash, and quarry waste, and to employ energy-saving concrete placement techniques. The beams underwent bending tests in which their mechanical behavior and their compliance with the specifications of the most relevant building codes were verified. The results pointed to the feasibility of increased sustainability in the field of building engineering through the suitable use of selected by-products and techniques., Spanish Ministry MCI, AEI, EU and ERDF [RTI2018-097079-B-C31; 10.13039/501100011033; FPU17/ 03374]; the Junta de Castilla y Le´on (Regional Government) and ERDF [UIC-231, BU119P17]; Youth Employment Initiative (JCyL) and ESF [UBU05B_1274]; the University of Burgos [grant number SUCONS, Y135.GI], UPV/EHU (PPGA20/26) and, finally, our thanks also go to the Basque Government research group IT1314-19 and likewise to CHRYSO and HORMOR for supplying the materials for research.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Artículo científico (JournalArticle)

Temporal flowability evolution of slag-based self-compacting concrete with recycled concrete aggregate

  • Revilla Cuesta, Víctor
  • Skaf Revenga, Marta
  • Santamaría, Amaia
  • Hernández Bagaces, Jorge J.
  • Ortega López, Vanesa
The addition of by-products, such as recycled concrete aggregate and ground granulated blast furnace slag, modify the in-fresh flowability of ordinary self-compacting concrete both initially and over time. A detailed study is presented in this paper of 18 mixtures (SF3 slump-flow class) containing 100% coarse recycled concrete aggregate, two types of cement (CEM I or CEM III/A, the latter with 45% ground granulated blast furnace slag), different contents of fine recycled concrete aggregate (0, 50, or 100%), and three different aggregate powders (ultra-fine limestone powder <0.063 mm, limestone fines 0/0.5 mm, and recycled concrete aggregate 0/0.5 mm). The temporal evolution of slump flow, viscosity, and passing ability, and the values of segregation resistance, air content, fresh and hardened density, and compressive strength were evaluated in all the mixtures. The addition of fine recycled concrete aggregate and CEM III/A improved initial slump flow and passing ability by 6%, due to their higher proportion of fines. Nevertheless, the temporal loss of flowability within 60 min was 5.8% lower when adding natural aggregate and CEM I. Viscosity and air content increased 26% on average following additions of fine recycled concrete aggregate, unlike with additions of ground granulated blast furnace slag. Flowability and strength increased with the addition of limestone fines 0/0.5 mm. According to multi-criteria analyses, the mixtures with CEM III/A, 50% fine recycled concrete aggregate, and limestone fines 0/0.5 mm showed an optimal balance between their flowability (SF2 slump-flow class 60 min after the mixing process), compressive strengths (around 60 MPa), and carbon footprints., Spanish Ministry MCIU, AEI and ERDF [grant numbers FPU17/03374 and RTI 2018-097079-B-C31]; the Junta de Castilla y León (Regional Government) and ERDF [grant number UIC-231, BU119P17]; the Youth Employment Initiative (JCyL) and ESF [grant number UBU05B_1274]; the University of Burgos [grant number SUCONS, Y135. GI], UPV/EHU (PPGA20/26) and, finally, our thanks also to the Basque Government research group IT1314-19.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Artículo científico (JournalArticle)

Assessment of longitudinal and transversal plastic behavior of recycled aggregate self-compacting concrete: A two-way study

  • Revilla Cuesta, Víctor
  • Skaf Revenga, Marta
  • Santamaría, Amaia
  • Ortega López, Vanesa
  • Manso Villalaín, Juan Manuel
Plastic strain behavior in the transversal direction to the axis of loading has often been underestimated in concrete design and its strength performance. However, as this article demonstrates, it is fundamental to define the viability of using concrete of a certain composition in real applications. In this study, 15 Self-Compacting Concrete (SCC) mixtures produced with Recycled Concrete Aggregate (RCA) and Ground Granulated Blast Furnace Slag (GGBFS) were subjected to a monotonic-load test and a 5-cycle loading/unloading test with increasing maximum loads. Continuous monitoring of the applied loads and the SCC strain was performed. In the transversal direction, these tests caused the appearance of a yield step, cracking by vertical splitting, and higher levels of deformability than in the longitudinal direction. It was concluded that the RCA content of SCC should be defined according to serviceability conditions when used in compressed elements, to safeguard against failure due to transversal plastic strain., Spanish Ministry MCIU, AEI and ERDF [grant numbers FPU17/03374 and RTI2018-097079-B-C31; 10.13039/501100011033]; the Junta de Castilla y León (Regional Government) and ERDF [grant number UIC-231, BU119P17]; Youth Employment Initiative (JCyL) and ESF [grant number UBU05B_1274]; the University of Burgos [grant number SUCONS, Y135.GI], UPV/EHU (PPGA20/26) and, finally, our thanks also to the Basque Government research group IT1314-19.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Artículo científico (JournalArticle)

Fiber-reinforcement and its effects on the mechanical properties of high-workability concretes manufactured with slag as aggregate and binder

  • Ortega López, Vanesa
  • García Llona, Aratz
  • Revilla Cuesta, Víctor
  • Santamaría, Amaia
  • San José Lombera, José Tomás
The feasibility of manufacturing fiber-reinforced concretes of high workability through additions of high volumes of electric arc furnace steel slag is evaluated in this paper, using sustainable binders with ground granulated blast furnace slag and ladle furnace slag as a supplementary cementitious material. An extensive experimental plan is developed to test four (self-compacting and pumpable) concrete mixtures, some reinforced with 0.5% vol. of (metallic or synthetic) fibers, in both the fresh and the hardened state. Very specific mechanical aspects are examined, such as the evaluation of both longitudinal and transversal stress-strain compressive behavior, and the assessment of direct tensile strength through the “dog-bone” test. The results of testing this sustainable concrete design yielded suitable mechanical strengths, and good toughness, ductility and impact strength, among other properties. Good adhesion between the fibers and the cementitious matrix was also evident from the fiber pull-out test results. Finally, the overall results confirmed that the use of electric arc furnace steel slag can make a real contribution to construction-sector sustainability and that the mechanical behavior of these novel concretes meets the basic design requirements for use in real structures., Spanish Ministries MCI, AEI, EU and ERDF [RTI2018-097079-B-C31; 10.13039/501100011033; FPU17/03374]; the Junta de Castilla y León (Regional Government) and ERDF [UIC-231, BU119P17]; the Basque Government research group [IT1314-19]; Youth Employment Initiative (JCyL) and ESF [UBU05B_1274]; the University of Burgos [Y135.GI] and the University of the Basque Country [PPGA20/26]. Likewise, our thanks to CHRYSO and HORMOR for supplying the materials used in this research.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Contribución de congreso (ConferenceOutput)

La infraestructura del transporte romano como patrimonio cultural

  • Romera, Jesús María
  • Pérez Acebo, Heriberto
  • Revilla Cuesta, Víctor
  • Manso Villalaín, Juan Manuel
Trabajo presentado en: R-Evolucionando el transporte, XIV Congreso de Ingeniería del Transporte (CIT 2021), realizado en modalidad online los días 6, 7 y 8 de julio de 2021, organizado por la Universidad de Burgos, El creciente interés por acercar el patrimonio cultural a la sociedad ha impulsado la investigación en el ámbito del transporte durante la época romana. Su objetivo es conocer la organización territorial, las características del comercio y su influencia en la economía y la sociedad a través del tiempo y el impacto de las decisiones políticas en las infraestructuras y el desarrollo económico de los territorios. Estos estudios se apoyan en los mapas confeccionados a partir de los emplazamientos de las ciudades y calzadas históricas. De tal modo que la precisión de sus resultados depende de la fiabilidad de tales cartografías históricas. Sin embargo, todavía persisten un notable número de ciudades y vías romanas sin localizar o cuyas identificaciones actuales no son seguras. En el presente trabajo, se detallan las dificultades inherentes a la identificación de las calzadas romanas, así como las herramientas de las que se dispone para ello. Además, se describe uno de los métodos para localizar rutas antiguas conflictivas en su identificación junto con un caso de estudio. Como resultado, se puede observar la importancia de las estrategias para la reconstrucción de los trazados de las rutas antiguas y la identificación de las ciudades en los estudios de movilidad en el mundo antiguo., Este trabajo ha sido posible gracias al apoyo de la Universidad del País Vasco UPV/EHU (PPGA20/26). Del mismo modo, queremos agradecer la ayuda al Grupo de Investigación del Gobierno Vasco IT1314-19.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Artículo científico (JournalArticle)

An alternative experimental methodology to determine the diagonal cracking resistance of steel-reinforced concrete beams

  • Romera, Jesús María
  • Marcos, Ignacio
  • Skaf Revenga, Marta
  • Ortega López, Vanesa
An alternative experimental method for predicting the diagonal shear cracking resistance of steel-reinforced concrete beams is developed in this paper. Conventional extensometric strain-gauge rosettes are placed on the lateral surfaces of a set of four beams. As diagonal cracking propagates through the beams, the load–strain curves flatten out at a plateau and the mechanical property under consideration may be determined. The method is applied to four beams cast from pumpable and self-compacting concrete mixes with cement types I and IV containing electric arc furnace slag aggregates. The feasibility of applying standard design code formulas to the concretes containing these aggregates may therefore be studied and compared with other recent research works. Accurate experimental results were obtained with this method without having to interrupt the test for subjective visual appraisals of the test specimen., The authors wish to express their gratitude to: the Spanish Ministry MICINN, AEI and ERDF [RTI2018-097079-BC31; PID2020-113837RB-I00; 10.13039/501100011033; FPU17/03374]; the Junta de Castilla y León (Regional Government) and ERDF [UIC-231, BU119P17]; Youth Employment Initiative (JCyL) and ESF [UBU05B_1274]; and the University of the Basque Country [PPGA20/26] and University of Burgos [SUCONS, Y135.GI] for additional funding. Our thanks also go to the Basque Government research group [IT1314-19] and likewise to CHRYSO and HORMOR for supplying the materials used in this research.