Pasar al contenido principal

DESARROLLO DE NANOFLUIDOS PARA INTERCAMBIADORES DE CALOR EN LA INDUSTRIA RENOVABLE GEOTERMICA

PRE2021-097589

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Desarrollar, Atraer y Retener Talento
Subprograma Subprograma Estatal de Formación
Convocatoria Contratos Predoctorales
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE VIGO

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Thermal and rheological behaviour of stearate-based phase change nanofluids

  • Iglesias Prado, José Ignacio
  • Navarro, María Elena
  • Calviño Barreiro, Uxía
  • Ding, Yulong
  • Lugo Latas, Luis
A comprehensive study has been performed on the thermal and rheological behaviour of two sets of isooctyl stearate (PureTemp 8, PT8) based nanofluids with different concentrations of spherical MgO nanoparticles (up to 15 wt%) and graphene nanoplatelets (up to 2 wt%). The results show that the presence of the nanomaterials does not significantly alter the phase change temperatures of the base fluids, although the latent heat decreases by 27% and 7.6% for 15 wt% MgO and 1.0 wt% GnP-based nanofluids, respectively. Both nanomaterials are found to increase the thermal diffusivity of the nanofluids. GnP-based suspensions have a higher thermal diffusivity than the MgO ones at similar nanomaterial concentrations. Rheological analyses show that MgO-PT8 nanofluids behave as a viscoplastic material (solid at zero shear rate); whereas the GnP-PT8 samples are viscoelastic (liquid at zero shear rate). MgO nanoparticles promote the formation of large fractal agglomerates, leading to a strong gel network of particles within PT8, while platelet-shaped GnP gives a fluid-like behaviour., Agencia Estatal de Investigación | Ref. ENE2017-86425-C2-1-R, Agencia Estatal de Investigación | Ref. PID2020-112846RB-C21, Agencia Estatal de Investigación | Ref. PDC2021-121225-C21, Agencia Estatal de Investigación | Ref. PRE2021-097589, Xunta de Galicia | Ref. ED431C 2020/06, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Advanced backfilling materials for enhancing the thermal efficiency of ground heat exchangers

  • Calviño Barreiro, Uxía
  • Pérez Vallejo, Javier
  • Ding, Yulong
  • Lugo Latas, Luis
Residential and industrial heating and cooling systems are among the largest consumers of energy. To meet the growing energy demand in this sector, sustainable solutions are being increasingly adopted, with geothermal heat pump systems emerging as a popular choice. The main component of these systems is the ground heat exchanger that comprises a borehole, typically filled with grout, and tubing that carries a heat transfer fluid, transferring thermal energy between the ground and the heat pump. To enhance the thermal performance of the backfilling material, the addition of phase change materials has been presented as a promising solution. This study examines the addition of a microencapsulated organic phase change material slurry into three commonly used geothermal boreholes backfilling materials (water, sand, and bentonite) at various concentrations. The phase change characteristics, including heating–cooling curves from 2 to 10 K⋅min− 1 , were analysed by differential scanning calorimetry. Isobaric heat capacities within solid and liquid phases were also measured. Solidliquid transition temperatures vary up to 4.8 K for melting and 5.1 K for crystallization of bentonite-based samples. Up to 7 times higher latent heat and up to 3.5 times higher isobaric heat capacity were noticed with increasing loading of microencapsulated phase change material. The designed materials show potential characteristics as backfilling materials for geothermal vertical boreholes, particularly those using bentonite and sand backfills., Agencia Estatal de Investigación | Ref. PID2020-112846RB-C21, Agencia Estatal de Investigación | Ref. PDC2021-121225-C21, Agencia Estatal de Investigación | Ref. PRE2021-097589