Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Artículo científico (JournalArticle)

Porosity-based models for estimating the mechanical properties of self-compacting concrete with coarse and fine recycled concrete aggregate

  • Revilla Cuesta, Víctor
  • Faleschini, Flora
  • Zanini, Mariano A.
  • Skaf Revenga, Marta
  • Ortega López, Vanesa
Predicting the mechanical properties of Self-Compacting Concrete (SCC) containing Recycled Concrete Aggregate (RCA) generally depends, in great part, on the RCA fraction in use. In this study, predictive equations for estimating SCC mechanical properties are developed through SCC porosity indices, so they are applicable to any RCA fraction and amount that may be used. A total of ten SCC mixes were prepared, nine of which containing different proportions of coarse and/or fine RCA (0%, 50% or 100% for both fractions), and the tenth mixed with 100% coarse and fine RCA, and RCA powder 0–1 mm. The following properties were evaluated: compressive strength, modulus of elasticity, splitting tensile strength, flexural strength, and effective porosity as measured with the capillary-water-absorption test. Negative effects on the above properties were recorded for increasing contents of both RCA fractions. The application of simple regression models yielded porosity-based estimations of the mechanical properties of the SCC with an accuracy margin of ±20%, regardless of the RCA fraction and amount. The results of the multiple regression models with compressive strength as a secondary predictive variable presented even greater robustness with accuracy margins of ±10% and almost no significant effect of accidental porosity variations on prediction accuracy. Furthermore, porosity predictions using the 24-h effective water also yielded accurate estimations of all the above mechanical properties. Finally, comparisons with the results of other studies validated the reliability of the models and their accuracy, especially the minimum expected values at a 95% confidence level, at all times lower than the experimental results., Spanish Ministry of Universities within the framework of the State Program for the Promotion of Talent and its Employability in R + D + i, State Mobility Subprogram, of the State Plan for Scientific and Technical Research and Innovation 2017–2020 [PRX21/00007]; the Spanish Ministry MCI, AEI, EU and ERDF [grant numbers PID2020-113837RB-I00; 10.13039/501100011033; FPU17/03374]; the Junta de Castilla y León (Regional Government) and ERDF [grant numbers UIC-231; BU119P17]; Youth Employment Initiative (JCyL) and ESF [grant number UBU05B_1274]; and finally, the University of Burgos [grant numbers SUCONS, Y135.GI] and the University of Padova.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Artículo científico (JournalArticle)

Validation of slag-binder fiber-reinforced self-compacting concrete with slag aggregate under field conditions: Durability and real strength development

  • Ortega López, Vanesa
  • Faleschini, Flora
  • Pellegrino, Carlo
  • Revilla Cuesta, Víctor
  • Manso Villalaín, Juan Manuel
The environmental conditions to which a concrete may be exposed will condition its real range of use. Thus, concrete behavior must, at all times, be verified under a wide variety of environmental conditions, in order to ensure its real applicability. In this study, the real strength development and durability behavior of a fiber-reinforced self-compacting concrete is analyzed. This particular concrete incorporates 100% coarse (4/12 mm) and fine (0/4 mm) Electric Arc Furnace Slag (EAFS) as aggregate, as well as limestone fines as aggregate powder (0/1.18 mm). Furthermore, Ground Granulated Blast Furnace Slag (GGBFS) was also added as binder. Four mixtures with and without either metallic or synthetic fibers, and different GGBFS contents were designed. Real strength development was evaluated in all the mixes by comparing the strength development of both cores extracted from full-scale beams and wet-cured laboratory specimens. The durability behavior was analyzed by Mercury Intrusion Porosimetry (MIP), freeze/thaw, moist/dry, sulfate-attack, chloride-penetration, carbonation, and SO2-attack tests. On the one hand, the long-term mechanical properties of the cores (real conditions) were similar to the properties of the specimens cured in a moist chamber for 90 days in all the mixes. On the other, the increase in water content when adding fibers to maintain flowability, as well as the addition of GGBFS, resulted in an increase in MIP porosity. Therefore, the use of fibers, both metallic and synthetic, slightly worsened the durability behavior of the concrete, facilitating the entry of aggressive external agents. Nevertheless, the increased flexibility of the cementitious matrix when adding GGBFS was beneficial against moist/dry and sulfate-attack phenomena, despite the increase in porosity. Overall, the mixes complied with the regulatory requirements for use in aggressive environments, although the amounts of fibers and GGBFS should be carefully studied., Spanish Ministry of Universities within the framework of the State Program for the Promotion of Talent and its Employability in R + D + i, State Mobility Subprogram, of the State Plan for Scientific and Technical Research and Innovation 2017-2020 [PRX21/00007]; the Spanish Ministry of Universities, MICINN, AEI, EU and ERDF [grant numbers PID2020-113837RB-I00; 10.13039/501100011033; FPU17/03374]; the Junta de Castilla y León (Regional Government) and ERDF [grant numbers UIC-231; BU119P17]; Youth Employment Initiative (JCyL) and ESF [grant number UBU05B_1274]; and finally, to the University of Burgos [grant numbers SUCONS, Y135.GI] and the University of Padova.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Artículo científico (JournalArticle)

Hammer rebound index as an overall-mechanical-quality indicator of self-compacting concrete containing recycled concrete aggregate

  • Revilla Cuesta, Víctor
  • Ortega López, Vanesa
  • Faleschini, Flora
  • Espinosa González, Ana Belén
  • Serrano López, Roberto
The hammer rebound index has traditionally been solely and exclusively used to estimate the compressive strength of vibrated concrete. Its use has recently been extended to the prediction of the compressive strength of Self-Compacting Concrete (SCC) and concrete produced with Recycled Concrete Aggregate (RCA). The conventional use of the hammer-rebound test is further developed in this paper, by demonstrating how it can be used to estimate the overall mechanical behavior of SCC containing RCA. To do so, nine SCC mixes with different contents and fractions (coarse, fine, and powder) of RCA are analyzed. Following a simple-linear-regression validation and property standardization procedure, the hammer rebound index is then expressed as a linear combination of four mechanical properties, adjusted through a multiple regression. The hammer rebound index is therefore expressed as a weighting of both the mean value of compressive behavior (arithmetic mean of compressive strength and modulus of elasticity) amounting to a weight of 72.8%, and the mean value of bendingtensile behavior (arithmetic mean of splitting tensile strength and flexural strength) amounting to a weight of 27.2%. The hammer rebound index can therefore be construed as an overall-mechanical-quality performance indicator of the SCC containing RCA, which can also yield predictions of every mechanical property. In this way, the application of the hammer rebound index could likewise be of use in rehabilitation, pathology, and healthmonitoring works where a full characterization of the mechanical performance of SCC with RCA is required, facilitating the use of SCC with RCA in real structures., The authors wish to express their gratitude to the following government ministries, agencies, and universities for funding this research: the Spanish Ministry of Universities, MICIN, AEI, EU, ERDF and NextGenerationEU/ PRTR [PID2020-113837RB-I00; 10.13039/501100011033; TED2021- 129715B-I00; FPU17/03374; PRX21/00007]; the Junta de Castilla y León (Regional Government) and ERDF [UIC-231, BU119P17]; the University of Burgos [SUCONS, Y135.GI]; and, finally, the University of Padova.