Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electromagnetic pulse generation in laser-proton acceleration from conductive and dielectric targets

  • Seimetz, Michael
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
  • Bellido, P.
  • Mur, P.
  • Lera, R.
  • Ruiz-de la Cruz, A.
  • Sánchez, I.
  • Zaffino, R.
  • Benlliure, J.
  • Ruiz, C.
  • Roso, L.
[EN] Laser-plasma interactions at high intensities are often accompanied by emission of a strong electromagnetic pulse (EMP) interfering with particle detectors or other electronic equipment. We present experimental evidence for significant differences in noise amplitudes in laser-proton acceleration from aluminium as compared to mylar target foils. Such dissimilarities have been consistently observed throughout two series of measurements indicating that, under otherwise identical conditions, the target conductivity is the principal parameter related to EMP generation. In addition, the lateral size of the target foils correlates with the absolute noise levels. A frequency analysis combined with numerical simulations allows for an identification of several sources of radiofrequency emission in the MHz-GHz regime. Further, the temporal evolution of single frequencies on the nanosecond scale provides information on distinct excitation mechanisms., This project has been funded by Ministerio de Economia y Competitividad, reference RTC-2015-3278-1, with further support by Ministerio de Ciencia, Innovacion y Universidades, reference RTI2018-101578-B-C22.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Characterization of protons accelerated from a 3 TW table-top laser system

  • Bellido-Millán, Pablo Jesús
  • Lera, Roberto
  • Ruiz-de la Cruz, Alexandro
  • Torres Peiró, Salvador
  • Galán, M.
  • Mur, P.
  • Sánchez, I.
  • Zaffino, R.
  • Soriano Asensi, Antonio
  • Sánchez-Góez, Sebastián
  • Rigla, J.P.
  • Iborra Carreres, Amadeo
  • Hernández Hernández, Liczandro
  • Grau-Ruiz, Daniel
  • Díaz Caballero, Elena
  • Conde-Castellanos, Pablo Eloy
  • Aguilar-Talens, Albert
  • Roso, Luis
  • Seimetz, Michael
  • Vidal San Sebastian, Luis Fernando|||0000-0001-8852-8560
  • F Sánchez
  • Rodríguez-Álvarez, M.J.|||0000-0001-8333-8792
  • Moliner Martínez, Laura
  • González Martínez, Antonio Javier
  • García-Garrigos, Juan José
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
[EN] We report on benchmark tests of a 3 TW/50 fs, table-top laser system specifically developed for proton acceleration with an intrinsic pump rate up to 100 Hz. In two series of single-shot measurements differing in pulse energy and contrast the successful operation of the diode pumped laser is demonstrated. Protons have been accelerated up to 1.6 MeV in interactions of laser pulses focused on aluminium and mylar foils between 0.8 and 25 mu m thickness. Their spectral distributions and maximum energies are consistent with former experiments under similar conditions. These results show the suitability of our system and provide a reference for studies of laser targets at high repetition rate and possible applications., This project has been funded by Centro para el Desarrollo Tecnologico Industrial (CDTI, Spain) within the INNPRONTA program, grant no. IPT-20111027, by EUROSTARS project E9113, and by the Spanish Ministry for Economy and Competitiveness within the Retos-Colaboracion 2015 initiative, ref. RTC-2015-3278-1.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Spectral characterization of laser-accelerated protons with CR-39 nuclear track detector

  • Seimetz, Michael
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
  • Bellido-Millán, Pablo Jesús
  • García, P.
  • Mur, P.
  • Iborra Carreres, Amadeo
  • Soriano Asensi, Antonio
  • Hülber, T.
  • Garcia Lopez, J.
  • Jiménez-Ramos, M. C.
  • Lera, Roberto
  • Ruiz-de la Cruz, A.
  • Sánchez, I.
  • Zaffino, R.
  • Roso, Luis
[EN] CR-39 nuclear track material is frequently used for the detection of protons accelerated in laserplasma interactions. The measurement of track densities allows for determination of particle angular distributions, and information on the kinetic energy can be obtained by the use of passive absorbers. We present a precise method of measuring spectral distributions of laser-accelerated protons in a single etching and analysis process. We make use of a one-to-one relation between proton energy and track size and present a precise calibration based on monoenergetic particle beams. While this relation is limited to proton energies below 1 MeV, we show that the range of spectral measurements can be significantly extended by simultaneous use of absorbers of suitable thicknesses. Examples from laser-plasma interactions are presented, and quantitative results on proton energies and particle numbers are compared to those obtained from a time-of-flight detector. The spectrum end points of continuous energy distributions have been determined with both detector types and coincide within 50-100 keV., This work has been developed in close collaboration with Radosys Ltd. (Budapest, Hungary) which provided CR-39 detector material, etching bath container, and readout equipment. The authors highly appreciate the fruitful contribution of the CNA accelerator operators. This project has been funded by the Spanish Ministry for Economy and Competitiveness within the Retos-Colaboracion 2015 initiative, Ref. No. RTC-2015-3278-1. P. Mur has been awarded a Garantia Juvenil grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Wafer-scale fabrication of target arrays for stable generation of proton beams by laser-plasma interaction

  • Zaffino, R.
  • Ruiz-de la Cruz, A.
  • Sánchez, I.
  • Mur, P.
  • Bellido-Millán, Pablo Jesús
  • Lera, Roberto
  • Quirión, D.
  • Martín, L.
  • Benlliure, J.
  • Lozano, M.
  • Pellegrini, G.
  • Seimetz, Michael
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
[EN] Large-scale fabrication of targets for laser-driven acceleration of ion beams is a prerequisite to establish suitable applications, and to keep up with the challenge of increasing repetition rate of currently available high-power lasers. Here we present manufacturing and test results of large arrays of solid targets for TNSA laser-driven ion acceleration. By applying micro-electro-mechanical-system (MEMS) based methods allowing for parallel processing of thousands of targets on a single Si wafer, sub-micrometric, thin-layer metallic membranes were fabricated by combining photolithography, physical and chemical vapor deposition, selective etching, and Si micromachining. These structures were characterized by using optical and atomic force microscopy. Their performance for the production of laser-driven proton beams was tested on a purpose-made table-top Ti:Sapphire laser system running at 3 TW peak power with a contrast over ASE of 108. We have performed several test series achieving maximum proton energy values around 2 MeV., This work has made use of the Spanish ICTS Network MICRONANOFABS partially supported by MEINCOM. This project has been financed by the Spanish Ministry for Economy and Competitiveness within the Retos- Colaboración 2015 initiative, ref. RTC-2015-3278-1. P. Mur has received a grant of the Garantía Juvenil 2015 program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Preparation and characterization of micro-nano engineered targets for high-power laser experiments

  • Zaffino, R.
  • Quirión, D.
  • Ruiz-de la Cruz, A.
  • Sánchez, I.
  • Mur, P.
  • Benlliure, J.
  • Martín, L.
  • Roso, Luis
  • Lozano, M.
  • Pellegrini, G.
  • Seimetz, Michael
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
[EN] The continuous development of ultra-fast high-power lasers (HPL) technology with the ability of working at unprecedented repetition rates, between 1 and 10 Hz, is raising the target needs for experiments in the different areas of interest to the HPL community. Many target designs can be conceived according to specific scientific issues, however to guarantee manufacturing abilities that enable large number production and still allow for versatility in the design is the main barrier in the exploitation of these high repetition rate facilities. Here, we have applied MEMS based manufacturing processes for this purpose. In particular, we have focused on the fabrication and characterization of submicrometric conductive membranes embedded in a silicon frame. These kinds of solid targets are used for laser-driven particle acceleration through the so-called Target Normal Sheath Acceleration mechanism (TNSA). They were obtained by top-down fabrication alternating pattern transfer, atomic layer deposition, and selective material etching. The adaptability of the approach is then analyzed and discussed by evaluating different properties of targets for use in laser-driven particle acceleration experiments. These characteristics include the surface properties of membranes after fabrication and the high density of the target array. Finally, we were able to show their efficiency for laser-driven proton acceleration in a series of experiments with a 3 TW table-top laser facility, achieving stable proton acceleration up to 2 MeV., The authors highly appreciate the collaboration of Radosys (Budapest) which provided CR-39 detector material, etching bath, and readout equipment. This project has been financed by the Spanish Ministry for Economy and Competitiveness within the Retos-Colaboracion 2015 initiative, ref. RTC-2015-3278-1. P. Mur has received a grant of the Garantia Juvenil 2015 program. This work has made use of the Spanish ICTS Network MICRONANOFABS partially supported by MEINCOM.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Efficient proton acceleration from a 3 TW table-top laser interacting with submicrometric mass-produced solid targets

  • Zaffino, R.
  • Ruiz-de la Cruz, A.
  • Sánchez, I.
  • Mur, P.
  • Quirión, D.
  • Bellido-Millán, Pablo Jesús
  • Lera, Roberto
  • Martín, L.
  • Benlliure, J.
  • Lozano, M.
  • Pellegrini, G.
  • Seimetz, Michael
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
[EN] Thin layer membranes with controllable features and material arrangements are often used as target materials for laser driven particle accelerators. Reduced cost, large scale fabrication of such membranes with high reproducibility, and good stability are central for the efficient production of proton beams. These characteristics are of growing importance in the context of advanced laser light sources where increased repetition rates boost the need for consumable targets with design and properties adjusted to study the different phenomena arising in ultra-intense laser-plasma interaction. Wepresent the fabrication of sub-micrometric thin-layer gold or aluminum membranes in a silicon wafer frame by using nano/micro-electro-mechanical-system (N/MEMS) processing which are suitable for rapid patterning and machining of many samples at the same time and allowing for high-throughput production of targets for laser-driven acceleration. Obtained targets were tested for laserproton acceleration through the Target Normal Sheath Acceleration mechanism (TNSA) in a series of experiments carried out on a purpose-made table-top Ti:Sa running at 3 TW peak power and 10 Hz diode pump rate with a contrast over ASE of 10(8), The authors highly appreciate the collaboration of Radosys (Budapest) which provided CR-39 detector material, etching bath, and readout equipment. This project has been financed by the Spanish Ministry for Economy and Competitiveness within the Retos-Colaboracion 2015 initiative, ref. RTC-2015-3278-1. P Mur has received a grant of the Garantia Juvenil 2015 program. This work has made use of the Spanish ICTS Network MICRONANOFABS partially supported by MEINCOM.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spectral characterization of laser-accelerated protons with CR-39 nuclear track detector

  • Seimetz, Michael
  • Bellido Millán, Pablo Jesús
  • García, P.
  • Mur, P.
  • Iborra, A.
  • Soriano, A.
  • Hülber, T.
  • García López, J.
  • Jiménez-Ramos, M. C.
  • Lera, R.
  • Ruiz de la Cruz, A.
  • Sánchez, Isabel
  • Zaffino, R.
  • Roso, Luis
  • Benlloch Baviera, José María
CR-39 nuclear track material is frequently used for the detection of protons accelerated in laser-plasma interactions. The measurement of track densities allows for determination of particle angular distributions, and information on the kinetic energy can be obtained by the use of passive absorbers. We present a precise method of measuring spectral distributions of laser-accelerated protons in a single etching and analysis process. We make use of a one-to-one relation between proton energy and track size and present a precise calibration based on monoenergetic particle beams. While this relation is limited to proton energies below 1 MeV, we show that the range of spectral measurements can be significantly extended by simultaneous use of absorbers of suitable thicknesses. Examples from laser-plasma interactions are presented, and quantitative results on proton energies and particle numbers are compared to those obtained from a time-of-flight detector. The spectrum end points of continuous energy distributions have been determined with both detector types and coincide within 50-100 keV., This project has been funded by the Spanish Ministry for Economy and Competitiveness within the Retos-Colaboracion 2015 initiative, Ref. No. RTC-2015-3278-1. P. Mur has been awarded a Garantía Juvenil grant., Peer reviewed