Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 15
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Estructuración de aceites mediante el uso de hidrocoloides para sustituir grasas plásticas en los alimentos

  • Bascuas Véntola, Santiago Martín
[ES] La presente Tesis doctoral plantea distintas estrategias para el diseño y desarrollo de oleogeles estables, con un perfil lipídico de alta calidad nutricional y la posterior incorporación de los oleogeles en la formulación de distintos alimentos. Se pretende diseñar alimentos mediante el reemplazo de grasas sólidas, ricas en ácidos grasos saturados y trans por oleogeles, que, por un lado, mantengan las propiedades texturales y organolépticas, y, por otro lado, presenten un perfil lipídico mejorado. En una primera etapa, se desarrollaron oleogeles elaborados con 1% de hidroxipropilmetilcelulosa y 0,6% de goma xantana empleando dos condiciones de secado diferentes: secado convencional en estufa a 80 °C durante 10 h 30 min y secado a vacío a 60 °C durante 24 h. Los aceites estructurados fueron aceite de oliva, lino, girasol y girasol alto oleico. La microestructura permitió apreciar oleogeles bien estructurados cuando se utilizaron los aceites de oliva, girasol y girasol alto oleico. La estabilidad física y las propiedades reológicas corroboraron la formación de oleogeles de alta estabilidad física, a lo largo de 35 días de almacenamiento, y con un comportamiento de gel sólido. Se observó que tanto el grado de insaturación del aceite como las condiciones de secado afectaron a la estabilidad física y química del oleogel. De esta manera, se obtuvieron oleogeles poco estructurados y no homogéneos al utilizar aceite con un alto grado de insaturación, como el aceite de lino, por secado convencional, mientras que no fue factible desarrollar oleogeles de lino con secado a vacío. Además, el secado en estufa convencional a 80 °C durante 10 h 30 min generó oleogeles de girasol y de girasol alto oleico con mayor estabilidad estructural y física que el secado a 60 °C durante 24 h. Los oleogeles de oliva y de girasol alto oleico producidos por secado convencional y los oleogeles de oliva y de girasol producidos por secado a vacío presentaron valores de estabilidad oxidativa primaria y secundaria dentro de los límites de aceptabilidad establecidos por el Codex Alimentarius. En una segunda etapa se desarrollaron cremas de cacao untables y panes dulces. En las cremas se estudió la microestructura, textura, reología y atributos sensoriales. La reformulación de las cremas con un reemplazo total (100%) y parcial (50%) de grasa de coco por oleogeles de oliva o girasol obtenidos por secado a vacío permitió mantener sus propiedades estructurales. Concretamente, la sustitución parcial de grasa de coco por oleogel de girasol permitió obtener cremas con atributos sensoriales como "apariencia cremosa", "textura cremosa" y "sabor a cacao", por lo que podría ser una alternativa viable para reformular cremas untables con un perfil nutricional más saludable. Los oleogeles de oliva o girasol alto oleico obtenidos por secado convencional y previamente caracterizados, se emplearon en la formulación de panes dulces elaborados al horno o al vapor. La reformulación con oleogeles permitió obtener panes con unas características estructurales y apariencia similar a la de los panes elaborados con margarina. La realización de una prueba triangular mostró diferencias en la apariencia de la miga y el sabor, mientras que no se observaron diferencias para el atributo textura entre los panes elaborados con oleogeles y con margarina. No se encontraron diferencias en la cantidad de ácidos grasos liberados tras la digestión in vitro entre los panes dulces elaborados con oleogeles y con margarina. Sin embargo, la velocidad inicial de la digestibilidad lipídica fue diferente dependiendo del tipo de procesado, horneado o vaporización, empleado en la elaboración de los panes. El desarrollo de oleogeles a base de hidrocoloides además de ofrecer a la industria alimentaria una alternativa como sustituto de grasas plásticas, podría investigarse como estrategia para modular la digestión de lípidos y brindar beneficios para la salud. Todas las estrategias abordadas en el transcurso de esta Tesis permitieron comprender y ahondar en los conocimientos que conducen a cómo reformular un alimento para mejorar su perfil lipídico sin comprometer sus características sensoriales y fisicoquímicas., [CA] La present Tesi doctoral planteja diferents estratègies per al disseny i desenvolupament d'oleogels estables, amb un perfil lipídic d'alta qualitat nutricional, i la posterior incorporación dels oleogels en diferents aliments. Es pretén dissenyar aliments mitjançant el reemplaçament de greixos sòlids, rics en àcids grassos saturats i trans per oleogels, que d'una banda, mantinguen les propietats texturals i organolèptiques, i d'altra banda, presenten un perfil lipídic millorat. En una primera etapa, es van desenvolupar oleogels elaborats amb un 1% de hidroxipropilmetilcel·lulosa i un 0,6% de goma xantana emprant dues condicions d'assecat diferents: assecat convencional en estufa a 80 °C durant 10 h 30 min i assecat a buit a 60 °C durant 24 h. Els olis estructurats van ser d'oliva, de lli, de gira-sol i de gira-sol alt oleic. La microestructura va permetre apreciar oleogels ben estructurats quan es van utilitzar els olis d'oliva, gira-sol i gira-sol alt oleic. L'estabilitat física i les propietats reològiques van corroborar la formació d'oleogels d'alta estabilitat física, al llarg de 35 dies d'emmagatzematge, i amb un comportament de gel sòlid. Tant el grau d'insaturació de l'oli com les condicions d'assecat van afectar l'estabilitat física i química del oleogel. D'aquesta manera, es van obtindre oleogels poc estructurats i no homogenis en utilitzar oli amb un alt grau d'insaturació, com l'oli de lli, per assecat convencional, mentre que no va ser factible desenvolupar oleogels de lli amb assecat a buit. A més, l'assecat en estufa convencional a 80 °C durant 10 h 30 min va generar oleogels de gira-sol i de gira-sol alt oleic amb major estabilitat estructural i física que l'assecat a 60 °C durant 24 h. Els oleogels d'oliva i gira-sol alt oleic, produïts per assecat convencional i els oleogels d'oliva i gira-sol produïts per assecat a buit van presentar valors d'estabilitat oxidativa primària i secundària dins dels límits d'acceptabilitat establits pel Codex Alimentarius. En una segona etapa, es van desenvolupar cremes de cacau untables i pans dolços. En aquest treball, es va estudiar la microestructura, textura, reologia i atributs sensorials de les cremes untables. La reformulació de cremes amb un reemplaçament total (100%) i parcial (50%) de greix de coco per oleogels d'oliva o gira-sol obtinguts per assecat a buit, va permetre mantindre les propietats estructurals de les cremes untables. Concretament, la substitució parcial de greix de coco per oleogel de gira-sol va ser descrita amb atributs sensorials com a "aparença cremosa", "textura cremosa" i "sabor de cacau", la qual cosa podria ser una alternativa viable per a reformular cremes per a untar amb un perfil nutricional més saludable. Els oleogels d'oliva o gira-sol alt oleic obtinguts per assecat convencional i prèviament caracteritzats, es van empra en la formulació de pans dolços cuinats al forn o al vapor. Es van estudiar les propietats estructurals, i la digestibilitat lipídica in vitro del producte final. La reformulació amb oleogels va permetre obtindre pans amb unes característiques estructurals i aparença similar a la dels pans elaborats amb margarina. La realització d'una prova triangular va mostrar diferències en l'aparença de la molla i el sabor, mentre que no es van observar diferències per a l'atribut textura, entre els pans elaborats amb oleogels i amb margarina. No es van trobar diferències en la quantitat d'àcids grassos alliberats després de la digestió in vitro entre els pans dolços elaborats amb oleogels i amb margarina. No obstant això, la velocitat inicial de la digestibilitat lipídica va ser diferent depenent de la mena de processament, enfornat o vaporatge, emprat en l'elaboració dels pans. El desenvolupament d’oleogels a base de hidrocol∙loides, a més d ́oferir a la indústria alimentària una alternativa com a substitut de greixos plàstics, podria investigar-se com a estratègia per modular la digestió de lípids i brindar beneficis per la salut. Totes les estratègies abordades en el transcurs d'aquesta Tesi van permetre comprendre i aprofundir en els coneixements que condueixen a com reformular un aliment per a millorar el seu perfil lipídic sense comprometre les seues característiques sensorials i fisicoquímiques., [EN] The research of this doctoral thesis proposes different strategies for the design and development of stable oleogels, with high nutritional lipid profile and the subsequent incorporation of the oleogels in the formulation of different . It aims to design foods by replacing solid fats, rich in saturated and trans fatty acids with oleogels, which, on the one hand, maintain the textural and organoleptic properties, and on the other hand, present an improved lipid profile. In a first stage, oleogels made with 1% hydroxypropylmethylcellulose and 0.6% xanthan gum were developed using two different drying conditions: conventional drying in an oven at 80 ° C for 10 h 30 'and vacuum drying at 60 ° C for 24 h. The structured oils were olive, flaxseed, sunflower and high oleic sunflower oil. The microstructure showed the oleogels structured, when olive, sunflower or high oleic sunflower oils were used. Physical stability and rheological properties corroborated the formation of oleogels with high physical stability, over 35 days of storage, and with a solid gel behaviour. Both the degree of unsaturation of the oil and the drying conditions affected the physical and chemical stability of the oleogel. In this way, unstructured non-homogeneous oleogels were obtained by using oil with a high degree of unsaturation, such as flaxseed oil, by conventional drying, while it was not feasible to develop flaxseed oleogels with vacuum drying. Furthermore, drying in a conventional oven at 80 ° C for 10 h 30 min generated sunflower and high oleic sunflower oleogels with more structural and physical stability than drying at 60 ° C for 24 h. Olive and high oleic sunflower oleogels, produced by conventional drying, and olive and sunflower oleogels produced by vacuum drying, presented primary and secondary oxidative values within the acceptability limits established by the Codex Alimentarius. In a second stage, spreadable cocoa creams and sweet breads were developed. The microstructure, texture, rheology and sensory attributes of spreadable creams were studied. The reformulation of cocoa creams with a total (100%) and partial (50%) replacement of coconut fat by olive or sunflower oleogels obtained by vacuum drying allowed to maintain the structural properties of spreadable creams. Specifically, the partial substitution of coconut fat for sunflower oleogel gave place to creams described with sensory attributes such as "creamy appearance", "creamy texture" and "cocoa flavor"; therefore, it could be a viable alternative to reformulate spreads with a healthier nutritional profile. The olive or sunflower oleogels obtained by conventional drying and previously characterized, were used in the formulation of sweet breads made in the oven or steamed. Replacement of margarine for oleogels produced breads with similar structural characteristics and appearance that those made with margarine. A triangular discriminatory test showed differences in the appearance of the crumb and the flavor, while no differences were observed for the texture attribute, between the breads made with oleogels or with margarine. No differences were found in the amount of fatty acids released after in vitro digestion between sweet breads made with oleogels and margarine. However, the initial rate of lipid digestibility was different depending on the type of processing, baking or steaming, used in the preparation of the breads. In addition to offering the food industry an alternative as a substitute for plastic fats, the debe lopment of hydrocolloid-based oleogels could be investigated as a strategy to modulate lipid digestion and provide health benefits.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Improving Pea Protein Emulsifying Capacity by Glycosylation to Prepare High-Internal-Phase Emulsions

  • Morell, Pere
  • López-García, Adrián
  • Hernando Hernando, Mª Isabel|||0000-0002-3322-935X
  • Quiles Chuliá, Mª Desamparados|||0000-0003-4991-6629
[EN] Pea protein has been extensively studied because of its high nutritional value, low allergenicity, environmental sustainability, and low cost. However, the use of pea protein in some food products is hindered due to the low functionality of pea protein, especially as an emulsifier. High-internal-phase emulsions (HIPEs) are attracting attention because of their potential application in the replacement of hydrogenated plastic fats in foods. In this study, the use of glycated pea protein isolate (PPI) as an emulsifier to prepare HIPEs is proposed. The functionalization of a commercial PPI in two ratios of maltodextrin (MD) (1:1 and 1:2) via glycosylation (15 and 30 min), to act as an emulsifier in HIPEs, is investigated. HIPE properties, such as oil loss and texture, were evaluated and related to microstructural properties. Glycated-PPI-stabilized HIPEs showed high consistency, firmness, viscosity, and cohesiveness values; a tight and homogeneous structure; and physical stability throughout storage. The results showed that emulsions were more stable when using a 1:2 ratio and 30 min of heat treatment. However, the reaction time was more determinant for improving the textural properties when a 1:1 ratio was used for glycosylation than when a 1:2 ratio was used. Glycosylation with MD via the Maillard reaction is a suitable method to enhance the emulsifying and stabilizing properties of PPI., This research was funded by the Ministerio de Ciencia, Innovación y Universidades through project RTI-2018-099738-B-C22.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Structure and stability of edible oleogels prepared with different unsaturated oils and hydrocolloids

  • Bascuas-Véntola, Santiago Martín
  • Hernando Hernando, Mª Isabel|||0000-0002-3322-935X
  • Moraga Ballesteros, Gemma|||0000-0002-8715-6109
  • Quiles Chuliá, Mª Desamparados|||0000-0003-4991-6629
[EN] Edible oleogels, with three oil types (olive, sunflower and flaxseed), hydroxypropylmethylcellulose (HPMC) and xanthan gum (XG), as structuring agents, were developed using the emulsion-template approach, and subsequent drying of the emulsions using conventional or vacuum drying. Our results showed that for both drying methods, well-structured oleogels were obtained using olive and sunflower oils for the preparation. These oleogels showed oil losses <10% after 35 days of storage. However, unstructured non-homogeneous oleogels were obtained when using flaxseed oil and conventional drying, while it was not feasible to develop flaxseed oleogel with vacuum drying. Oleogels showed interesting rheological properties, including a high oleogel strength with an elastic modulus of the order 10(4)-10(5) Pa, weak dependence on frequency, and good thermostability. Moreover, high oxidative stability was obtained for olive oil oleogels, using both conventional and vacuum drying, and for sunflower oleogels using vacuum drying. Still, the initial oxidation rates of sunflower oleogels using conventional drying should be improved in future studies, The authors would like to thank Universitat Politecnica de Valencia by FPI-UPV 2017 grant and the project RTI2018-099738-B-C22 from the 'Ministerio de Ciencia, Innovacion y Universidades'. They would also like to thank Phillip John Bentley for assistance in correcting the English manuscript.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Comparison of different indirect approaches to design edible oleogels based on cellulose ethers

  • Wang, Q.
  • Espert, M.
  • Salvador, A.
  • Sanz, T.
  • Larrea Santos, Virginia|||0000-0003-0282-4938
  • Quiles Chuliá, Mª Desamparados|||0000-0003-4991-6629
[EN] Growing public concern about the adverse health effects of overconsumption of saturated fat has contributed to the rising research interest in the field of using healthy oils to construct edible structured oils (oloegels) as fatbased alternatives. In this study two indirect methodologies (the emulsion template approach and the foam template approach) were investigated to prepare oleogels with hydroxypropyl methylcellulose and methylcellulose as gelling agent at three different oil concentrations. Microstructure, texture, rheology, and oil retention capacity were measured to evaluate the structural and physicochemical properties of oleogels. Results showed that the emulsion-based oleogel effectively inhibited the aggregation of droplets. The dry emulsion showed independent droplets and an oil retention capacity of 100%. In foam-type oleogels the oil retention rate was negatively correlated with the oil content. The oleogels prepared by both methods have excellent mechanical properties and gel strength, with a predominance of the elastic versus the viscous behavior. Hydroxypropyl methylcellulose and methylcellulose had different degrees of influence on the structure and mechanical properties of the two oleogels. The results of this paper provide guidance for the development and application of cellulose-based oleogels as healthy alternatives to saturated fat., This work is supported by the Spanish Ministry of Science and Innovation (Funding number: RTI-2018-099738-B-C21) . We also thank the financial support from the China Scholarship Council for Dr. Qi Wang.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Recent trends in oil structuring using hydrocolloids

  • Bascuas-Véntola, Santiago Martín
  • Morell-Esteve, Pere
  • Hernando Hernando, Mª Isabel|||0000-0002-3322-935X
  • Quiles Chuliá, Mª Desamparados|||0000-0003-4991-6629
[EN] Solid fats provide desirable functionality, texture, and palatability to foods; however, they are related to adverse chronic health effects. Consumers and regulatory authorities are demanding more natural and healthy ingredients. Thus, in context of the high demand for healthy foods and the transition to more sustainable ingredients, oil structuring emerges as an outstanding strategy to substitute saturated and trans fats. Researchers have developed optimised indirect routes to structure oil with hydrocolloids resulting in gelled emulsions and oleogels. Novel healthy food structures based on polysaccharides, proteins, and their supramolecular interactions are suitable to create several types of healthy colloidal systems with unique sensory, texture, and stability properties., The authors would like to thank Universitat Politecnica de Valencia by FPI-UPV 2017 grant and the project RTI-2018-099738-B-C22 from the 'Ministerio de Ciencia, Innovacion y Universidades'. They would also like to thank Phillip John Bentley for assistance in correcting the English manuscript.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

High internal phase emulsions design using citrus by-products as stabilizers

  • Martínez-Martí, Joana|||0000-0002-7070-6573
  • Quiles Chuliá, Mª Desamparados|||0000-0003-4991-6629
  • Moraga Ballesteros, Gemma|||0000-0002-8715-6109
  • Llorca Martínez, Mª Empar|||0000-0003-3346-3135
  • Hernando Hernando, Mª Isabel|||0000-0002-3322-935X
[EN] The citrus juice industry produces about 50% of by-products. Citrus pomace (CP) contains many polysaccharides (mainly cellulose and pectin), which could act as stabilizers and emulsifiers. The aim of this work was to obtain high internal phase emulsions (HIPEs) using unmodified CP at different concentrations to valorize citrus by-products. The synergic effect of pea protein isolate (PPI) with CP to stabilize the HIPEs was also studied. HIPEs structure was analyzed using rheological and microscopy studies as well as color and physical stability of the emulsions. According to rheological data, all samples exhibited a solid-like behavior, as elastic modulus (G¿) was higher than viscous modulus (G¿¿) within the viscoelastic linear region; as % CP and % PPI increased, greater values of G¿ and apparent viscosity (¿) were achieved. Microscopic images showed that oil droplets had a polyhedral shape and were enclosed by a thin layer of CP and PPI. Increasing concentrations of CP and PPI enhanced oil droplets packaging. Emulsions¿ physical stability was better when adding PPI. The results showed that stable HIPEs with 1.25% of CP and PPI over 0.5% can be obtained. These HIPEs could be used to formulate emulsions for food applications, such as mayonnaises, fillings, or creams., This research was funded by Grant (RTI2018-099738-B-C22) funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe" and grant (FPU19/03803) funded by MCIN/AEI/10.13039/501100011033 and by "ESF Investing in your future".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Providing Stability to High Internal Phase Emulsion Gels Using Brewery Industry By-Products as Stabilizers

  • López-García, Adrián
  • Moraga Ballesteros, Gemma|||0000-0002-8715-6109
  • Hernando Hernando, Mª Isabel|||0000-0002-3322-935X
  • Quiles Chuliá, Mª Desamparados|||0000-0003-4991-6629
[EN] The modern brewing industry generates high amounts of solid wastes containing biopolymers-proteins and polysaccharides-with interesting technological and functional properties. The novelty of this study was to use raw by-product from the brewing industry in the development of high internal phase emulsion (HIPE) gels. Thus, the influence of the emulsion's aqueous phase pH and the by-product's concentration on structural and physical stability of the emulsions was studied. The microstructure was analyzed using cryo-field emission scanning electron microscopy. To evaluate the rheological behavior, oscillatory tests (amplitude and frequency) and flow curves were conducted. Moreover, the physical stability of the emulsions and the color were also studied. The increase in by-product concentration and the pH of the aqueous phase allowed development of HIPE gels with homogeneously distributed oil droplets of regular size and polyhedral structure. The data from the rheology tests showed a more stable structure at higher pH and higher by-product concentration. This study widens the possibilities of valorizing the brewing industry's by-products as stabilizers when designing emulsions., Grant RTI-2018-099738-B-C22 funded by MCIN/AEI/ 10.13039/501100011033 and ERDF A way of making Europe.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Structural and sensory studies on chocolate spreads with hydrocolloid-based oleogels as a fat alternative

  • Bascuas-Véntola, Santiago Martín
  • Espert, María
  • Salvador Alcaraz, Ana
  • Llorca Martínez, Mª Empar|||0000-0003-3346-3135
  • Quiles Chuliá, Mª Desamparados|||0000-0003-4991-6629
  • Hernando Hernando, Mª Isabel|||0000-0002-3322-935X
[EN] In this study, chocolate spreads were designed using oleogels with two oils (olive and sunflower), and hydroxypropylmethylcellulose (HPMC) and xanthan gum (XG), as structuring agents. Thus, the lipid profile of the spreads can be improved by totally or partially replacing the coconut butter used in their preparation. Structural behaviour was analysed using confocal laser scanning microscopy (CLSM), small amplitude oscillatory rheology, and a spreadability test. A Free Choice Profile analysis was performed by consumers to determine the sensorial attributes that described the chocolate spreads. The results showed that the oleogels conferred consistency to the spreads because of the network formed by HPMC and XG. However, while coconut butter replacement at 50% gave a similar structure to the control spread, 100% replacement resulted in less homogeneous spreads. This trend might be attributed to the chemical compatibility between the oleogel-coconut butter, which led to stronger systems. Sensory evaluation showed that chocolate spread replaced by sunflower oleogel at 50% presented sensory attributes like the control spread with "creamy appearance", "creamy texture", and "cocoa flavour". Therefore, using oleogels can be a viable and healthy alternative to replace the saturated fat present in chocolate spreads., The authors would like to thank Universitat Politecnica de Valencia by FPI-UPV 2017 grant and the project RTI2018-099738-B-C22 from the 'Ministerio de Ciencia, Innovacion y Universidades'.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Microencapsulation of roasted coffee oil from chitosan nanoparticles-stabilized Pickering emulsions

  • Franco Ribeiro, Elisa
[ES] El proceso de emulsificación de aceites ricos en compuestos bioactivos permite su mejor aplicación y conservación durante el tiempo de almacenamiento. Entre los diversos mecanismos de emulsificación, se destaca el método de Pickering ya que utiliza nanopartículas sólidas naturales en sustitución de los tensioactivos artificiales. Debido a sus propiedades antioxidantes, no toxicidad y disponibilidad, en este trabajo se estudiaron distintas modificaciones del quitosano para su potencial aplicación como partícula de Pickering. Las modificaciones estudiadas fueron la autoagregación, también denominada desprotonación, y el entrecruzamiento con tripolifosfato de sodio. Se evaluó el comportamiento de estas partículas emulsionando aceite de café tostado, un subproducto de la industria de café con un alto contenido de compuestos bioactivos y compuestos volátiles de interés. Posteriormente, se analizaron las propiedades físico-químicas y la estabilidad de las microcápsulas producidas tras el secado de las emulsiones mediante técnicas de secado por atomización y liofilización. Todas las emulsiones se caracterizaron por tener un comportamiento reológico pseudoplástico, sufriendo desintegración a lo largo del proceso de digestión. Las emulsiones formuladas con nanopartículas de quitosano desprotonadas y menor concentración de aceite mostraron una mejor estabilización y, en consecuencia, una mayor bioaccesibilidad de los compuestos fenólicos totales. Las diferentes nanopartículas de quitosano se caracterizaron estudiando su carga superficial, distribución del tamaño de partícula, microestructura y afinidad agua/aceite. A medida que se aumentó la concentración de estas partículas, se afectó positivamente la viscosidad de las emulsiones debido a la formación de una red tridimensional en la fase continua. Las nanopartículas obtenidas al entrecruzar quitosano con tripolifosfato de sodio fueron más pequeñas, dando como resultado emulsiones con gotas más pequeñas. Las emulsiones de Pickering que contenían un 10% de aceite de café tostado se secaron por atomización y se liofilizaron utilizando las diferentes nanopartículas de quitosano estudiadas y maltodextrina como agentes portadores. Las microcápsulas obtenidas tuvieron la humedad, actividad del agua y solubilidad adecuada para su manipulación y almacenamiento. La presencia de nanopartículas de quitosano permitió una mayor retención de aceite en las microcápsulas y mayor eficiencia de encapsulación. Los compuestos bioactivos y las propiedades antioxidantes se conservaron mejor durante la liofilización. Por otro lado, las microcápsulas obtenidas por atomización presentaron mayor protección de estos compuestos durante la digestión. Las microcápsulas formuladas con nanopartículas desprotonadas fueron sometidas a almacenamiento durante 30 días a 25 ºC. Durante el almacenamiento, se evaluó la protección contra la oxidación de lípidos y la liberación de volátiles. Las isotermas de sorción de agua de estas muestras se determinaron también previamente en las condiciones de almacenamiento. Ambas muestras presentaron isotermas del tipo II, lo que permitió un buen ajuste del modelo de GAB a los datos experimentales. La determinación del índice de peróxido y del contenido de dienos conjugados dio lugar a valores adecuados durante el almacenamiento, aunque las muestras liofilizadas presentaron una ligera tendencia a la oxidación debido a la mayor cantidad de aceite superficial. Aunque hubo ligeras diferencias entre las muestras secas, todas mostraron menos pérdida de aromas totales (~28%) en comparación con el aceite no encapsulado (~51%) al final del almacenamiento. Así, se concluyó que las nanopartículas de quitosano estudiadas fueron eficientes para encapsular el aceite de café tostado y preservar sus características frente a la acción de agentes externos., [CA] El procés d'emulsificació d'olis rics en compostos bioactius permet la seua millor aplicació i conservació durant el temps d'emmagatzematge. Entre els diversos mecanismes d'emulsificació, destaca el mètode de Pickering, ja que utilitza nanopartícules sòlides naturals en substitució als tensioactius artificials. A causa de la seua propietat antioxidant, de la no toxicitat i de la disponibilitat, aquest treball va buscar analitzar el quitosà i les seues modificacions com potencials partícules de Pickering. Les modificacions estudiades van ser la autoagregació, també anomenada desprotonació, i l'entrecreuament amb tripolifosfat de sodi. Es va avaluar el comportament d'aquestes partícules emulsionant oli de cafè torrat, un subproducte de la indústria del cafè amb un alt contingut de compostos bioactius i volàtils d'interès. Posteriorment, es van analitzar les propietats fisicoquímiques i l'estabilitat de les microcàpsules produïdes després de l'assecat de les emulsions mitjançant tècniques d'assecatge per atomització i liofilització. Totes les emulsions tenien un comportament reològic pseudoplàstic, sofrint desintegració al llarg del procés de digestió. Les emulsions formulades amb nanopartícules de quitosà desprotonades i menor concentració d'oli van mostrar una millor estabilització i, en conseqüència, una major bioaccesibilitat als compostos fenòlics totals. Les diferents nanopartícules de quitosà es van caracteritzar estudiant la seua càrrega superficial, distribució del tamany de partícula, microestructura i afinitat aigua/oli. A mesura que es va augmentar la concentració d'aquestes partícules, es va afectar positivament la viscositat de les emulsions a causa de la formació d'una xarxa tridimensional en la fase contínua. Les nanopartícules obtingudes a l'entrecreuar quitosà amb tripolifosfat de sodi van ser més menudes, donant com a resultat emulsions amb gotes més menudes també. Les emulsions de Pickering que contenien un 10% d'oli de cafè torrat es van assecar per atomització i es liofilitzaren utilitzant les diferents nanopartícules de quitosà estudiades i maltodextrina com a agents portadors. Les microcàpsules obtingudes van obtenir una humitat, activitat de l'aigua i solubilitat adequada per a la seua manipulació i emmagatzematge. La presència de nanopartícules de quitosà va permetre major retenció d'oli en les microcàpsules i major eficiència d'encapsulació. Els compostos bioactius i les propietats antioxidants es van conservar millor durant la liofilització. D'altra banda, les microcàpsules obtingudes per atomització presentaren major protecció d'aquests compostos durant la digestió. Les microcàpsules formulades amb nanopartícules desprotonades també van ser sotmeses a la prova d'emmagatzematge durant 30 dies a 25°C. Durant l'emmagatzematge, es va avaluar la seua protecció contra l'oxidació de lípids i l'alliberament de volàtils. Per això, les isotermes de sorció d'aigua d'aquestes mostres es van determinar prèviament en les condicions d'emmagatzematge. Les dues mostres van presentar isotermes de tipus II, el que va permetre un bon ajust del model de GAB a les dades experimentals. L'índex de peròxids i el contingut de diens conjugats van resultar en valors adequats durant l'emmagatzematge, encara que les mostres liofilitzades van presentar una lleugera tendència a l'oxidació a causa de la major quantitat d'oli superficial. Encara que va haver lleugeres diferències entre les mostres seques, totes van mostrar menys pèrdua d'aromes totals (~28%) en comparació amb l'oli no encapsulat (~51%) a la fi de l'emmagatzematge. Així, es va concloure que les nanopartícules de quitosà estudiades van ser eficients per encapsular l'oli de cafè torrat i preservar les seues característiques enfront de l'acció d'agents externs., [EN] The emulsification process of bioactive-rich oils makes possible their better application and preservation over the storage time. Among the many emulsification mechanisms, the Pickering method has been highlighted as it uses natural solid nanoparticles in replacement of artificial surfactants. Due to the antioxidant properties, non-toxicity and availability, this work aimed at studying chitosan modifications to produce potential Pickering particles. The studied modifications comprised self-aggregation, also called deprotonation, and crosslinking with sodium tripolyphosphate. The performance of these particles was evaluated in the emulsification of roasted coffee oil, a by-product of the coffee industry with a high content of bioactive and volatile compounds of interest. Subsequently, the physicochemical properties and stability of the microcapsules produced after drying the emulsions using spray-drying and lyophilization techniques were analyzed. All emulsions were characterized as shear-thinning, being them destabilized over the digestion process. Emulsions formulated with deprotonated chitosan nanoparticles and lower oil concentrations showed better stabilization and, consequently, greater bioaccessibility of total phenolic compounds. The different chitosan nanoparticles were characterized regarding surface charge, particle size distribution, microstructure and oil/water affinity. Deprotonated chitosan nanoparticles had a larger particle size, which resulted in emulsions with larger oil droplets. As the concentration of these particles increased, the viscosity of the emulsions was positively affected by the formation of a three-dimensional network in the continuous phase. The nanoparticles obtained by crosslinking with sodium tripolyphosphate were smaller, resulting in emulsions with smaller droplets. The viscosity of these emulsions was lower and little affected by the concentration of particles. Pickering emulsions containing 10% roasted coffee oil were spray-dried and freeze-dried, using the different studied chitosan nanoparticles and maltodextrin as carrier agents. The resulting microcapsules showed adequate moisture content, water activity and solubility for subsequent handling and storage. The presence of chitosan nanoparticles resulted in greater oil retention in the microcapsules and higher encapsulation efficiency. Microcapsules obtained by spray-drying had a more regular spherical shape, while the microparticles obtained by freeze-drying were larger with irregular morphology. Bioactive compounds and antioxidant properties were more preserved during freeze-drying. On the other hand, spray drying allowed greater protection of these compounds during the in vitro digestion. The spray- and freeze-dried microcapsules formulated with deprotonated nanoparticles were subjected to the storage test for 30 days at 25 ºC. During storage, their protection against lipid oxidation and volatile release were evaluated. The water sorption isotherms of these samples were previously determined under the storage conditions. Both samples presented type II isotherms, which resulted in a good fitting accuracy of the GAB model to the experimental data. The peroxide index and the conjugated dienes content resulted in adequate values during storage, although the freeze-dried samples showed a slightly higher tendency to oxidation due to the higher amount of surface oil. Although slight differences were observed between the dried samples, both of them showed less loss of total volatile compounds (~28%) when compared to the non-encapsulated oil (~51%) at the end of storage. Thus, it was concluded that the studied chitosan nanoparticles were efficient to encapsulate roasted coffee oil and to preserve its characteristics against the action of external agents., The authors would like to thank the project RTI-2018-099738-B-C22 from the ‘Ministerio de Ciencia, Innovación y Universidades’, the Coordenação de Aperfeiçoamento de Pessoal de Nível Superior – Brazil (CAPES) - (Finance Code 001; Grant number 88887.468140/2019-00) and the São Paulo Research Foundation (FAPESP – Grant number 2016/22727-8) for the financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Use of Oleogels to Replace Margarine in Steamed and Baked Buns

  • Bascuas-Véntola, Santiago Martín
  • Morell-Esteve, Pere
  • Salvador, Ana
  • Quiles Chuliá, Mª Desamparados|||0000-0003-4991-6629
  • Hernando Hernando, Mª Isabel|||0000-0002-3322-935X
[EN] Bakery products are usually formulated with solid fats, like margarines and shortenings, which contain high levels of saturated and trans-fatty acids and have negative effects on human health. In this study, hydroxypropyl methylcellulose (HPMC) and xanthan gum (XG) were used as oleogelators to prepare oleogels, using sunflower and olive oil, as substitutes for margarine in baked or steamed buns. The effect of oleogels on the physical properties of the buns was evaluated by analyzing the crumb structure, specific volume, height, and texture. In addition, a triangular discriminatory sensory test was conducted, and lipid digestibility was assessed through in vitro digestion studies. Replacement of margarine with oleogels produced steamed buns with no differences in the crumb structure, volume, height, and texture; however, in baked buns, a less porous and harder structure was produced. No differences in texture were observed between the margarine buns and buns made with oleogels when the triangular test was conducted. The extent of lipolysis was not affected when margarine was replaced by oleogels in the baked and steamed buns. The results suggest that using oleogels instead of margarine in buns could represent an interesting strategy to prepare healthier bakery products., This research was funded by the 'Ministerio de Ciencia, Innovacion y Universidades' through project RTI-2018-099738-B-C22 and Universitat Politecnica de Valencia by the grant FPI-UPV 2017.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Protein- and polysaccharide-based particles used for Pickering emulsion stabilisation

  • Ribeiro, E. F.
  • Morell-Esteve, Pere
  • Nicoletti, V. R.
  • Quiles Chuliá, Mª Desamparados|||0000-0003-4991-6629
  • Hernando Hernando, Mª Isabel|||0000-0002-3322-935X
[EN] A few protein- and polysaccharide-based particles can function as effective stabilisers in multi-phase food systems. Combining both polymer-based particles and tailoring the wettability of colloidal systems result in particlestabilised emulsions with great stability. High internal phase emulsions (HIPEs) have also been produced using such particles giving rise to a more stable, highly viscous structure. Thus, the purpose here is to review the advantages and disadvantages of using protein, polysaccharide and protein-polysaccharide complexes and conjugates for stabilising emulsions, highlighting the composites of amphiphilic protein-polysaccharide particles that can function as outstanding copolymer stabilising agents. The current challenges and emerging research trends are exploring renewable, sustainable, clean-label, and eco-friendly biopolymer particles that are effective as Pickering stabilisers., The authors would like to thank the project RTI-2018-099738-B-C22 from the 'Ministerio de Ciencia, Innovacion y Universidades', the Coordenacao de Aperfeicoamento de Pessoal de Nivel Superior - Brazil (CAPES) Finance Code 001, and Sao Paulo Research Foundation (FAPESP - Grant number 2016/227278) . They would also like to thank Phillip John Bentley for assistance correcting the manuscript's English.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Using different physical treatments to modify the structure and improve the technofunctional properties of clementine by-products

  • Martínez-Martí, Joana|||0000-0002-7070-6573
  • Larrea Santos, Virginia|||0000-0003-0282-4938
  • Quiles Chuliá, Mª Desamparados|||0000-0003-4991-6629
  • Hernando Hernando, Mª Isabel|||0000-0002-3322-935X
  • Panu ková, Kristýna
  • Bleha, Roman
[EN] Clementine by-products are an important source of dietary fiber, which has different technofunctional properties depending on its chemical composition and structure. These properties can be modified through different treatments. In this work, the impact of treatments such as hot air drying (HAD), homogenization (HOM), freeze drying (FD), and extrusion (EXT) was evaluated on the structure and technofunctional properties of clementine by-products' powders, to promote their use as ingredients in food development as a way of valorization. The structure of by-products was studied using microscopy (Light Microscopy and Field Emission Scanning Electron Microscopy) and vibrational spectroscopic (FTIR and FT-Raman) techniques. The technofunctional properties, water and oil holding capacities, water solubility, swelling capacity, and emulsifying capacity, as well as particle size were evaluated. HOM and EXT showed a more stratified and porous structure than HAD and FD. FTIR and FT-Raman showed that the by-products mainly comprised pectin and cellulose. Regarding technofunctional properties, HOM powders had high water retention and swelling capacities, and good emulsifying capacity even when using high amounts of oil in an emulsion (75 %). FD powders showed the highest oil retention capacity and EXT powders the highest water solubility., This research was funded by grant (RTI2018-099738-B-C22) funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe" and grant (FPU19/03803) funded by MCIN/AEI/10.13039/501100011033 and by "ESF Investing in your future". The authors want to thank Phillip Bentley for his assistance in correcting the manuscript's English. The authors acknowledge the donation of citrus pomace from the Zumos Valencianos del Mediterraneo S.L.com pany.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Designing Hydrocolloid-Based Oleogels With High Physical, Chemical, and Structural Stability

  • Bascuas-Véntola, Santiago Martín
  • Salvador, Ana
  • Hernando Hernando, Mª Isabel|||0000-0002-3322-935X
  • Quiles Chuliá, Mª Desamparados|||0000-0003-4991-6629
[EN] Numerous studies conducted have shown a direct relationship between the high consumption of saturated andtrans-fats and the risk of suffering from cardiovascular diseases, diabetes, and different cancers. Oleogels, with a suitable lipid profile of mono-, poly-unsaturated fatty acids, and similar functionality to traditional solid fat, can be a healthy alternative in food formulation. The aim of this study is to develop edible oleogels with a healthy and stable lipid profile, using the emulsion-template approach and hydrocolloids as oleogelators. Oleogels were developed from sunflower oil and sunflower oil with a high content of monounsaturated acids, using hydroxypropylmethylcellulose (HPMC) and xanthan gum (XG) as oleogelators. The influence of two drying conditions (60 degrees C for 24 h and 80 degrees C for 10 h 30 min) along with the composition of the oil on the structural, physical, and oxidative stability of oleogels were studied. All oleogels presented a stable network and high physical stability with oil losses 10(5)Pa related to solid gel-like behavior. Oleogels made with sunflower oil rich in monounsaturated fatty acids resulted in higher oxidative stability, with those developed at drying temperatures of 80 degrees C for 10 h 30 min having a greater structural and physical stability., The authors would like to thank Universitat Politecnica de Valencia by FPI-UPV 2017 grant and the project RTI2018-099738-B-C22 from the Ministerio de Ciencia, Innovacion y Universidades.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Designing Hydrocolloid-Based Oleogels With High Physical, Chemical, and Structural Stability

  • Bascuas, Santiago
  • Salvador, Ana
  • Hernando, Isabel
  • Quiles, Amparo
Numerous studies conducted have shown a direct relationship between the high consumption of saturated and trans-fats and the risk of suffering from cardiovascular diseases, diabetes, and different cancers. Oleogels, with a suitable lipid profile of mono-, poly-unsaturated fatty acids, and similar functionality to traditional solid fat, can be a healthy alternative in food formulation. The aim of this study is to develop edible oleogels with a healthy and stable lipid profile, using the emulsion-template approach and hydrocolloids as oleogelators. Oleogels were developed from sunflower oil and sunflower oil with a high content of monounsaturated acids, using hydroxypropylmethylcellulose (HPMC) and xanthan gum (XG) as oleogelators. The influence of two drying conditions (60°C for 24 h and 80°C for 10 h 30 min) along with the composition of the oil on the structural, physical, and oxidative stability of oleogels were studied. All oleogels presented a stable network and high physical stability with oil losses <14% after 35 days of storage. Rheological properties showed that oleogels displayed a low frequency dependent and G′ > 105 Pa related to solid gel-like behavior. Oleogels made with sunflower oil rich in monounsaturated fatty acids resulted in higher oxidative stability, with those developed at drying temperatures of 80°C for 10 h 30 min having a greater structural and physical stability., The authors would like to thank Universitat Politècnica de València by FPI-UPV 2017 grant and the project RTI2018-099738-B-C22 from the Ministerio de Ciencia, Innovacion y Universidades., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Use of Oleogels to Replace Margarine in Steamed and Baked Buns

  • Bascuas, Santiago
  • Morell, Pere
  • Quiles, Amparo
  • Salvador, Ana
  • Hernando, Isabel
Bakery products are usually formulated with solid fats, like margarines and shortenings, which contain high levels of saturated and trans-fatty acids and have negative effects on human health. In this study, hydroxypropyl methylcellulose (HPMC) and xanthan gum (XG) were used as oleogelators to prepare oleogels, using sunflower and olive oil, as substitutes for margarine in baked or steamed buns. The effect of oleogels on the physical properties of the buns was evaluated by analyzing the crumb structure, specific volume, height, and texture. In addition, a triangular discriminatory sensory test was conducted, and lipid digestibility was assessed through in vitro digestion studies. Replacement of margarine with oleogels produced steamed buns with no differences in the crumb structure, volume, height, and texture; however, in baked buns, a less porous and harder structure was produced. No differences in texture were observed between the margarine buns and buns made with oleogels when the triangular test was conducted. The extent of lipolysis was not affected when margarine was replaced by oleogels in the baked and steamed buns. The results suggest that using oleogels instead of margarine in buns could represent an interesting strategy to prepare healthier bakery products., This research was funded by the ‘Ministerio de Ciencia, Innovación y Universidades through project RTI-2018-099738-B-C22 and Universitat Politècnica de València by the grant FPI-UPV 2017., Peer reviewed