Pasar al contenido principal

SISTEMAS ANALITICOS INNOVADORES BASADOS EN RECEPTORES NANOESTRUCTURADOS SOBRE SUSTRATOS (NANO)CELULOSICOS PARA LA DETECCION DE SUSTANCIAS DE INTERES MEDIOAMBIENTAL

RTI2018-093697-B-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE VIGO

Resultados relacionados

Resultados totales (Incluyendo duplicados): 21
Encontrada(s) 1 página(s)

Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Assessing citric acid-derived luminescent probes for pH and ammonia sensing: a comprehensive experimental and theoretical study

  • Placer Vidal, Lorena
  • Estévez Guiance, Laura
  • Lavilla Beltrán, Maria Isela
  • Pena Pereira, Francisco Javier
  • Bendicho Hernández, Jose Carlos
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, The present work reports on the assessment of luminescent probes derived from citric acid (CA) and β-aminothiols (namely, l-cysteine (Cys) and cysteamine) for instrumental and smartphone-based fluorimetric sensing purposes. Remarkably, the evaluated luminescent probes derived from natural compounds showed pH-dependent dual excitation/dual emission features. Both fluorophores hold promise for the ratiometric fluorimetric sensing of pH, being especially convenient for the smartphone-based sensing of pH via ratiometric analysis by proper selection of B and G color channels. Time dependent density functional theory (TDDFT) calculations allowed to substantiate the pH dependent structure-property relationship and to unveil the critical role of the CA derived carboxyl group, these findings contributing to the fundamental knowledge on these systems for the rational design of new fluorophores and in establishing fluorescence sensing mechanisms of CA-derived systems. Besides, paper-based devices modified with CA-Cys were implemented in a three-phase separation approach for sensitive and selective ammonia sensing, yielding a remarkable enrichment factor of 389 and a limit of detection of 37 μM under optimal conditions. The proposed approach was successfully applied to the determination of ammonia nitrogen and extractable ammonium in water samples and marine sediments, respectively., Xunta de Galicia | Ref. ED431I 2020/04, Xunta de Galicia | Ref. ED431C 2019/24, Agencia Estatal de Investigación | Ref. RTI2018-093697-B-I00
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

In situ formation of a Fe3O4@HgS nanocomposite for green preconcentration of Hg followed by detection with a direct mercury analyzer

  • González Fernández, Aida
  • De La Calle Gonzalez, Inmaculada
  • Romero Rivas, Vanesa
  • Lavilla Beltrán, Maria Isela
  • Bendicho Hernández, Jose Carlos
A novel method with a high greenness profile for the selective preconcentration and detection of Hg at ultratrace levels that involves magnetic nanoparticles has been developed. The ultrasonic decomposition of l-cysteine generated sulphide anion, which acts as a precursor for the formation of Fe3O4@HgS structures resulting in the efficient trapping of Hg(II) onto magnetite. Ultrasonic energy can be considered as green energy and l-cysteine is more environmentally friendly reagent than other sulphide precursors such as sodium sulphide. The magnetic sorbent allowed an easy phase separation using a magnet, thus avoiding centrifugation or filtration steps. A direct mercury analyzer allowed the direct and sensitive determination of the Hg collected onto the magnetic phase. A preconcentration factor of up to 91 and a limit of detection of 0.04 μg L−1 Hg can be achieved using a sample volume of 20 mL. Three reference materials were analyzed after application of the developed preconcentration method obtaining recoveries in the range 96–100 %. Additionally, water samples, including mineral water, tap water, seawater, fountain water and river water, were spiked at two levels of concentration, 5 and 10 μg L−1, recoveries being in the range of 91–110 %, Agencia Estatal de Investigación | Ref. PID2022-136337OB-I00, Agencia Estatal de Investigación | Ref. RTI2018-093697-B-I00, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

A 3D microfluidic paper-based analytical device with smartphone-assisted colorimetric detection for iodine speciation in seaweed samples

  • Placer Vidal, Lorena
  • Lavilla Beltran, Maria Isela
  • Pena Pereira, Francisco Javier
  • Bendicho Hernandez, Jose Carlos
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, The present work reports on the development of a 3D origami microfluidic paper-based analytical device (3D µPAD) for the determination of iodide and iodate in edible seaweeds by smartphone-based colorimetric detection. In addition, a methacrylate holder was designed and fabricated to enhance interlayer contact in 3D µPADs, obtaining excellent sensitivity and precision, also allowing real-time monitoring in a straightforward and expeditious way. The reported assay, based on the formation of a blue colored triiodide-starch complex at the detection areas of the 3D µPAD, represents an affordable, fast and greener alternative for the simultaneous determination of inorganic iodine species. Under optimal conditions, the proposed method showed limits of detection and quantification of 9.8 and 32.7 µM for I- and 0.6 and 1.8 µM for IO3-, respectively. The repeatability, expressed as relative standard deviation, was 1.7% and 3.3% for I- and IO3-, respectively. The proposed 3D µPAD was applied to the determination of iodine species in extracts of edible seaweeds and related food additives, showing satisfactory recoveries (90–109%)., Agencia Estatal de Investigación | Ref. RTI2018-093697-B-I00
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Kinetic spectrophotometric assay for the determination of vitamin C in cosmetics following ultrasound-assisted emulsification

  • Lavilla Beltran, Maria Isela
  • Romero Rivas, Vanesa
  • Costas, Paula
  • Bendicho Hernandez, Jose Carlos
In this work, a new analytical approach based on ultrasound-assisted emulsification followed by a photoreaction with methylene blue (MB) and kinetic analysis by UV-vis spectrophotometry has been developed for the determination of l -ascorbic acid (AA) in cosmetic samples. The emulsification of cosmetic samples results in a transparent solution that allows an easy and rapid quantitation by UV-vis spectrophotometry. The emulsified sample is mixed with a MB aqueous solution and this mixture is subjected to irradiation with a tungsten lamp for 5 min (fixed-time kinetic assay). A reduction in the MB absorbance intensity at 664 nm occurs as the concentration of AA increases. The observed change in absorbance intensity was used for calibration and further quantitation using the relationship of absorbance logarithm vs. AA concentration (μg mL −1 ). In order to achieve an optimal response, different parameters involved in the reaction between AA and MB were fully investigated. Under optimal conditions, the limits of detection and quantification were 0.04 μg mL −1 and 0.15 μg mL −1 , respectively. Repeatability and reproducibility, expressed as relative standard deviation, were in the range of 0.4–0.6% and 0.6–1.5%, respectively. Finally, the proposed method was applied to the analysis of 15 cosmetic samples, namely, (i) 12 samples without AA, which were used to carry out recovery studies, obtaining results in the range of 97.5–100.7%; (ii) 3 serum samples containing pure AA among their ingredients, which were used for AA stability studies., Agencia Estatal de Investigación | Ref. RTI2018-093697-B-I00, Xunta de Galicia | Ref. ED481D-2021-021
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Fluorescent paper-based sensor integrated with headspace thin-film microextraction for the detection of acyclic N-nitrosamines following in situ photocatalytic decomposition

  • Romero Rivas, Vanesa
  • Sant’Anna, Carolina
  • Lavilla Beltran, Maria Isela
  • Bendicho Hernandez, Jose Carlos
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, Background: In this work, a novel analytical approach based on the photocatalytic decomposition of N-nitrosamines combined with headspace thin-film microextraction of the generated nitrogen oxides such as NO has been developed for the determination of the acyclic N-nitrosamine fraction in drinking water samples. A hydrophilic cellulose substrate modified with fluorescent silver nanoclusters (Ag NCs) was used both as extractant and sensing platform. A quenching effect of Ag NCs fluorescence occurs as the concentration of N-nitrosamines increases. Front-face fluorescence spectroscopy with a solid sample holder was employed for directly measuring the fluorescence quenching onto the cellulose substrate. Results: In order to achieve an optimal analytical response, different parameters involved in the photocatalytic reaction as well as those concerning the microextraction step were fully investigated. It is demonstrated that the photodegradation rate of cyclic N-nitrosamines at acidic pH is much lower than that of acyclic ones, which can be the basis for the determination of the later fraction in waters. Under optimal conditions, a detection limit for the acyclic N-nitrosamine fraction around 0.08 μg L−1 using N-nitrosodimethylamine (NDMA) as model compound for calibration was obtained. Several drinking waters were spiked with acyclic N-nitrosamines showing recoveries in the range of 98–102% with a relative standard deviation of 3–4% (N = 3). Significance and novelty: N-nitrosamines generated as by-products during disinfection processes applied to water cause multiple adverse effects on human health being classified as potential human carcinogens. This study highlights the suitability of a fluorescent paper-based sensor for the rapid analysis of the acyclic N-nitrosamine fraction (i.e. the most abundant fraction) as a total index in drinking water, being useful as screening tool before exhaustive chromatographic analysis, which saves costs, time and reduces waste generation., Agencia Estatal de Investigacion | Ref. RTI2018- 093697-B-I00, Xunta de Galicia | Ref. ED481D-2021-021
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Waterproof cellulose-based substrates for in-drop plasmonic colorimetric sensing of volatiles: application to acid-labile sulfide determination in waters

  • Villarino García, Nerea
  • Pena Pereira, Francisco Javier
  • Lavilla Beltran, Maria Isela
  • Bendicho Hernandez, Jose Carlos
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, The present work reports on the assessment of widely available waterproof cellulose-based substrates for the development of sensitive in-drop plasmonic sensing approaches. The applicability of three inexpensive substrates, namely, Whatman 1PS, polyethylene-coated filter paper, and tracing paper, as holders for microvolumes of colloidal solutions was evaluated. Waterproof cellulose-based substrates demonstrated to be highly convenient platforms for analytical purposes, as they enabled in situ generation of volatiles and syringeless drop exposure unlike conventional single-drop microextraction approaches and can behave as sample compartments for smartphone-based colorimetric sensing in an integrated way. Remarkably, large drop volumes (≥20 μL) of colloidal solutions can be employed for enrichment processes when using Whatman 1PS as holder. In addition, the stability and potential applicability of spherical, rod-shaped, and core–shell metallic NPs onto waterproof cellulose-based substrates was evaluated. In particular, Au@AgNPs showed potential for the colorimetric detection of in situ generated H2S, I2, and Br2, whereas AuNRs hold promise for I2, Br2, and Hg0 colorimetric sensing. As a proof of concept, a smartphone-based colorimetric assay for determination of acid-labile sulfide in environmental water samples was developed with the proposed approach taking advantage of the ability of Au@AgNPs for H2S sensing. The assay showed a limit of detection of 0.46 μM and a repeatability of 4.4% (N = 8), yielding satisfactory recoveries (91–107%) when applied to the analysis of environmental waters., Xunta de Galicia | Ref. ED431I 2020/04, Agencia Estatal de Investigación | Ref. RTI2018-093697-B-I00
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Covalent organic framework as adsorbent for ultrasound-assisted dispersive (micro)solid phase extraction of polycyclic synthetic fragrances from seawater followed by fluorescent determination

  • Romero Rivas, Vanesa
  • Lavilla Beltran, Maria Isela
  • Álvarez, Alicia
  • Bendicho Hernandez, Jose Carlos
  • Espiña, Begoña
  • Salonen, Laura M.
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, In this work, a new analytical approach based on ultrasound-assisted dispersive (micro)solid phase extraction (US-D-μSPE) using TpBD-Me2 covalent organic framework (COF) as adsorbent for simple, rapid and selective fluorescent determination of two polycyclic synthetic fragrances in seawater, i.e., 1,3,4,6,7,8-hexahydro-4,6,6,7,8,8-hexamethyl-cyclopenta-(γ)-2-benzopyran (HHCB), branded galaxolide®, and 7-acetyl-1,1,3,4,4,6-hexamethyltetralin (AHTN), branded tonalide®, is proposed. Different parameters involved in both adsorption and desorption steps were optimized in order to obtain the best results. High adsorption efficiencies in the range of 91.2–97.8% were achieved for both analytes. Desorption efficiencies of ∼98% for AHTN and HHCB were obtained using methanol as solvent, rendering the material recyclable with merely minor losses in adsorption efficiency after five consecutive cycles of adsorption/desorption. Limits of detection (LODs) were 0.082 μg L−1 and 0.070 μg L−1 for AHTN and HHCB, respectively. The proposed method was successfully applied for the analysis of seawater without the need for a previous sample treatment, e.g., pH adjustment. Recoveries in the range of 90.4–101.2% with a relative standard deviation of 5.8% were obtained for both fragrances. The results proved the great capacity of TpBD-Me2 COF for the selective sorption of polycyclic fragrances in combination with fluorescent detection, being highly promising for application to environmental monitoring of other emerging organic pollutants., Agencia Estatal de Investigación | Ref. RTI2018-093697-B-I00, Xunta de Galicia | Ref. ED481B 2017/033
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Bromine speciation by a paper-based sensor integrated with a citric acid/cysteamine fluorescent probe and smartphone detection

  • Placer Vidal, Lorena
  • Lavilla Beltran, Maria Isela
  • Pena Pereira, Francisco Javier
  • Bendicho Hernandez, Jose Carlos
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, The present work reports on a sensitive and affordable non-instrumental method for the determination of bromine species in environmental waters by combination of paper-based headspace sampling and smartphone-based fluorescence detection. The proposed approach takes advantage of the luminescence quenching of a probe (5-oxo-3,5-dihydro-2 H-thiazolo[3,2-a]pyridine-7-carboxylic acid, TPCA) derived from natural compounds, namely, citric acid and cysteamine, when exposed to molecular bromine. The decreased luminescence intensity of the probe was attributed to the formation of a dibrominated derivative of TPCA at the detection area of a paper-based analytical device (PAD). Remarkably, PADs modified with the luminescent probe showed excellent stability. Under optimal conditions, the proposed approach showed limits of detection of 5.4 µg L-1 and 0.9 µg L-1 for Br- and BrO3-, respectively, with a repeatability lower than 10% for both bromine species. The non-instrumental method was validated against two certified reference materials, namely BCR-611 and BCR-612 (low and high level Br- in groundwater), and successfully applied to the analysis of environmental water samples with recoveries in the range 93–106%., Agencia Estatal de Investigación | Ref. RTI2018-093697-B-I00, Xunta de Galicia | Ref. ED431I 2020/04
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Miniaturized analytical methods for determination of environmental contaminants of emerging concern – A review

  • Pena Pereira, Francisco Javier
  • Bendicho Hernandez, Jose Carlos
  • Pavlović, Dragana Mutavdžić
  • Martín Esteban, Antonio
  • Díaz Álvarez, Myriam
  • Pan, Yuwei
  • Cooper, Jon
  • Yang, Zhugen
  • Safarik, Ivo
  • Pospiskova, Kristyna
  • Segundo, Marcela A.
  • Psillakis, Elefteria
The determination of contaminants of emerging concern (CECs) in environmental samples has become a challenging and critical issue. The present work focuses on miniaturized analytical strategies reported in the literature for the determination of CECs. The first part of the review provides brief overview of CECs whose monitoring in environmental samples is of particular significance, namely personal care products, pharmaceuticals, endocrine disruptors, UV-filters, newly registered pesticides, illicit drugs, disinfection by-products, surfactants, high technology rare earth elements, and engineered nanomaterials. Besides, an overview of downsized sample preparation approaches reported in the literature for the determination of CECs in environmental samples is provided. Particularly, analytical methodologies involving microextraction approaches used for the enrichment of CECs are discussed. Both solid phase- and liquid phase-based microextraction techniques are highlighted devoting special attention to recently reported approaches. Special emphasis is placed on newly developed materials used for extraction purposes in microextraction techniques. In addition, recent contributions involving miniaturized analytical flow techniques for the determination of CECs are discussed. Besides, the strengths, weaknesses, opportunities and threats of point of need and portable devices have been identified and critically compared with chromatographic methods coupled to mass chromatography. Finally, challenging aspects regarding miniaturized analytical methods for determination of CECs are critically discussed., European Cooperation in Science and Technology (COST) | Ref. CA 16215, Ministerio de Ciencia, Innovación y Universidades | Ref. RTI2018-093697-B-I00, UK NERC | Ref. NE / R013349 / 2, Fundação para a Ciência e a Tecnologia | Ref. UIDB / 50006/2020
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Graphene-based nanocomposites in analytical extraction processes

  • Pena Pereira, Francisco Javier
  • Romero Rivas, Vanesa
  • De La Calle Gonzalez, Inmaculada
  • Lavilla Beltran, Maria Isela
  • Bendicho Hernandez, Jose Carlos
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, Since its discovery in 2004, substantial efforts have been devoted to the use of graphene and graphene oxide (GO) in areas such as catalysis, clean energy devices, electronics, biomedicine and, particularly, as sorbents in sample preparation for both trace organic and inorganic analysis. In a step forward, in the last few years, a number of applications have arisen where the properties of graphene and GO as sorbents are enhanced by providing additional features, i.e. functionalisation for improving selectivity and sorption ability, magnetisation to facilitate and accelerate stages inherent to some extraction modes or greater stability by synthesis of novel nanocomposites so that it can be adapted to some (micro)extraction techniques. In this review, the latest innovations on graphene and GO platforms used for sorption, either by introducing new functionalities or by hybridisation with other nanomaterials (nanocomposites) are reviewed, along with their preparation methods, analytical characteristics, applications and future prospects., Ministerio de Ciencia, Innovación y Universidades | Ref. RTI2018-093697-B-I00, Xunta de Galicia | Ref. ED431I 2020/04, Xunta de Galicia | Ref. ED481B 2017/033
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Tesis doctoral (DoctoralThesis)

Development of innovative sensing approaches based on natural compounds using cellulose substrates combined with optical detection, Desarrollo de estrategias innovadoras de detección basadas en compuestos naturales utilizando sustratos de celulosa combinados con detección óptica, Desenvolvemento de estratexias innovadoras de detección baseadas en compostos naturais empregando substratos de celulosa combinados con detección óptica

  • Placer Vidal, Lorena
The analytical methodologies used for the determination of contaminants commonly require advanced analytical instrumentation, which hinders their application in on-site analysis. The development of miniaturized instrumental systems allows decentralized analysis, although it is necessary to develop preconcentration and selective detection strategies that allow the unequivocal determination of compounds of interest at low concentration levels. In addition, the combination of widely deployed electronic devices, such as smartphones, tablets, scanners or webcams, with image processing software offers new opportunities for chemical analysis. However, these systems generally show low sensitivity and selectivity. Therefore, it would be highly desirable to develop sensitive and selective methods involving portable detection systems and, especially, high-implementation electronic devices for on-site quantitative analysis with minimal consumption of chemical reagents. In this regard, a number of optically active molecular compounds derived from natural compounds, are highly promising for non-instrumental optical detection. The present PhD research project is focused on the development of new optical sensors for the monitoring of various environmental pollutants. The general objectives are the design of new miniaturized analytical systems for the ultrasensitive detection of analytes of environmental interest. Implementation of optically active materials in micro-separation systems. Preliminary evaluation of the potential of these systems. Use of miniaturized instrumental optical techniques (UV-vis spectrophotometry and fluorospectrometry). Combination of miniaturized analytical systems with digitization and image processing systems for non-conventional optical detection. Study of the recognition mechanism of analytes of interest by means of instrumental characterization techniques and computational studies. Development of novel, rapid, sensitive and selective analytical methodologies with potential for on-site analysis., Las metodologías analíticas empleadas para la determinación de contaminantes requieren, comúnmente, instrumentación analítica avanzada, lo cual dificulta enormemente su aplicación en análisis on site. El desarrollo de sistemas instrumentales miniaturizados permite realizar análisis descentralizados, si bien es necesario desarrollar estrategias de preconcentración y detección selectiva que permitan efectuar la determinación inequívoca de compuestos de interés a bajos niveles de concentración. Además, la combinación de dispositivos electrónicos de amplia implantación, tales como teléfonos inteligentes, tabletas, escáneres o webcams, con programas informáticos de procesamiento de imágenes ofrece nuevas oportunidades para efectuar análisis químicos. Sin embargo, estos sistemas muestran generalmente una baja sensibilidad y selectividad. Sería altamente deseable, por tanto, el desarrollo de métodos sensibles y selectivos que involucren sistemas de detección portátiles y, especialmente, dispositivos electrónicos de alta implantación para el análisis cuantitativo on site de contaminantes con un consumo mínimo de reactivos químicos. En este sentido, una serie de materiales ópticamente activos, tales como compuestos moleculares derivados de compuestos naturales, son altamente prometedores para la detección óptica no instrumental. El presente proyecto de tesis está enfocado al desarrollo de nuevos sensores ópticos para el control de diversos contaminantes medioambientales. Los objetivos generales son el diseño de nuevos sistemas analíticos miniaturizados para la detección ultrasensible de analitos de interés medioambiental. Implementación de materiales ópticamente activos en sistemas de microseparación. Evaluación preliminar del potencial de dichos sistemas. Empleo de técnicas ópticas instrumentales (espectrofotometría y fluorospectrometría) de microvolúmenes. Combinación de sistemas analíticos miniaturizados con sistemas de digitalización y procesamiento de imágenes para detección óptica no convencional. Estudio del mecanismo de reconocimiento de analitos de interés mediante técnicas de caracterización instrumentales y estudios computacionales. Desarrollo de metodologías analíticas novedosas, rápidas, sensibles y selectivas con potencial de análisis on site., As metodoloxías analíticas empregadas para a determinación de contaminantes requiren, comunmente, instrumentación analítica avanzada, o cal dificulta enormemente a súa aplicación en análises on site. O desenvolvemento de sistemas instrumentais miniaturizados permite realizar análises descentralizados, se ben é necesario desenvolver estratexias de preconcentración e detección selectiva que permitan efectuar a determinación inequívoca de compostos de interese a baixos niveis de concentración. Ademais, a combinación de dispositivos electrónicos de ampla implantación, tales como teléfonos intelixentes, tabletas, escáneres ou webcams, con programas informáticos de procesamento de imaxes ofrece novas oportunidades para efectuar análises químicos. Sen embargo, estes sistemas mostran xeralmente unha baixa sensibilidade e selectividade. Sería altamente desexable, polo tanto, o desenvolvemento de métodos sensibles e selectivos que involucren sistemas de detección portátiles e, especialmente, dispositivos electrónicos de alta implementación para o análise cuantitativo on site de contaminantes cun consumo mínimo de reactivos químicos. Neste sentido, unha serie de materiais ópticamente activos, tales como compostos moleculares derivados de compostos naturais, son altamente prometedores para a detección óptica non instrumental. O presente proxecto de tese está enfocado ó desenvolvemento de novos sensores ópticos para o control de diversos contaminantes medioambientais. Os obxectivos xerais son o deseño de novos sistemas analíticos miniaturizados para a detección ultrasensible de analitos de interese medioambiental. Implementación de materiais ópticamente activos en sistemas de microseparación. Avaliación preliminar do potencial de ditos sistemas. Emprego de técnicas ópticas instrumentais (espectrofotometría e fluorospectrometría) de microvolumes. Combinación de sistemas analíticos miniaturizados con sistemas de dixitalización e procesamento de imaxes para detección óptica non convencional. Estudo do mecanismo de recoñecemento de analitos de interese mediante técnicas de caracterización instrumentais e estudos computacionales. Desenvolvemento de metodoloxías analíticas novedosas, rápidas, sensibles e selectivas con potencial de análisis on site., Agencia Estatal de Investigación | Ref. RTI2018-093697-B-I00, Agencia Estatal de Investigación | Ref. PID2022-136337OB-I00
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Fluorescent poly(vinylpyrrolidone)-supported copper nanoclusters in miniaturized analytical systems for iodine sensing

  • Pena Pereira, Francisco Javier
  • Capón, Nerea
  • De La Calle Gonzalez, Inmaculada
  • Lavilla Beltrán, Maria Isela
  • Bendicho Hernández, Jose Carlos
Poly(vinylpyrrolidone)-supported copper nanoclusters (CuNCs) are employed in the present work as luminescent probes for iodide determination in water samples. The method involves the combination of two miniaturized analytical systems, namely nanoparticle-enhanced liquid-phase microextraction and microvolume fluorospectrometry. The proposed method is based on the in situ generation of iodine and trapping of the evolved volatile into a CuNCs-containing aqueous microdrop, thus leading to fluorescence quenching. The fluorescence quenching mechanism for iodine sensing can be presumably ascribed to a ‘sphere of action’ static quenching model. Instrumental conditions, as well as a number of experimental parameters affecting extractant phase composition, iodine generation conditions and mass transfer of the volatile, have been evaluated. An outstanding enrichment factor of ca. 1100 was achieved under optimal conditions, yielding limits of detection and quantification of 1.0 ng/mL and 3.4 ng/mL, respectively. The repeatability, expressed as relative standard deviation, was found to be 7.4% (N = 7). The method was validated against a certified reference material and successfully applied to the analysis of different water samples. Furthermore, paper-based analytical devices containing CuNCs have been evaluated for the non-instrumental sensing of iodine generated in situ, showing promise as an inexpensive and portable alternative for iodide determination., Agencia Estatal de Investigación | Ref. RTI2018-093697-B-I00, Xunta de Galicia
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Silver nanoparticle-cellulose composite for thin-film microextraction of Cd and Pb as dithiocarbamate derivatives followed by inductively-coupled plasma mass spectrometry determination

  • De La Calle Gonzalez, Inmaculada
  • Fernández Rodríguez, Diego
  • Lavilla Beltran, Maria Isela
  • Bendicho Hernandez, Jose Carlos
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, Preconcentration of Cd and Pb at ultratrace level in waters following filtration through silver nanoparticles-cellulose composites used for thin-film microextraction was performed. The new procedure was based on the formation of pyrrolidine dithiocarbamate (APDC) derivatives, which showed a large affinity toward the AgNPs. For this purpose, cellulose filters modified with AgNPs were prepared in situ upon reduction of silver ions by sodium tetrahydroborate. The effect of several experimental parameters such as the kind of derivatization agent and its concentration, sample pH, desorption conditions and volume of filtered sample was assessed. Cd and Pb were quantitated in the eluates by inductively coupled plasma-mass spectrometry (ICP-MS). Filters were characterized by scanning electron microscopy (SEM) in backscattering electron mode and combined with energy dispersive X-ray spectrometry, showing the presence of Ag and S in the cellulose filter. The repeatability expressed as relative standard deviation (RSD,%) was 1.4% for Cd and 5.8% for Pb. Methodological detection limits were 0.6 and 8.5 ng/L for Cd and Pb, respectively. The method was applied to several environmental waters., Agencia Estatal de Investigación | Ref. RTI2018-093697-B-I00
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

A paper-based colorimetric assay with non-instrumental detection for determination of boron in water samples

  • Pena Pereira, Francisco Javier
  • Velázquez, Angie
  • Lavilla Beltrán, Maria Isela
  • Bendicho Hernández, Jose Carlos
The present work reports on the combination of paper-based analytical devices (PADs) and information technology (IT) equipment for non-instrumental determination of boron. PADs prepared with curcumin as a receptor and ethanolic extracts of Curcuma longa L. powder were evaluated for sensing. The colorimetric assay is based on a two step-strategy involving initially the formation of rosocyanin in the PAD under acidic conditions, with subsequent color change (from red to blue-green) at alkaline pH. The color change produced in the PAD is then exploited for determination of boron by digitization and image processing with IT devices (scanner and tablet camera) and an image analysis program, respectively. Under optimal conditions, the proposed assay showed limits of detection in the range 0.2–0.8 mg/L depending on the PADs and IT devices used for colorimetric reaction and digitization, respectively. In addition, the repeatability, expressed as relative standard deviation, was found to be below 5% (5 mg/L, N = 10). PADs prepared with curcumin and ethanolic extracts of Curcuma longa L. powder showed excellent lifetime and successful applicability to the analysis of water samples of different complexity with recoveries in the range 93–105%., Agencia Estatal de Investigación | Ref. RTI2018-093697-B-I00
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Paper-based analytical devices for colorimetric and luminescent detection of mercury in waters: an overview

  • Bendicho Hernandez, Jose Carlos
  • Lavilla Beltran, Maria Isela
  • Pena Pereira, Francisco Javier
  • De La Calle Gonzalez, Inmaculada
  • Romero Rivas, Vanesa
Lab-on-paper technologies, also known as paper-based analytical devices (PADs), have received increasing attention in the last years, and nowadays, their use has spread to virtually every application area, i.e., medical diagnostic, food safety, environmental monitoring, etc. Advantages inherent to on-field detection, which include avoiding sampling, sample preparation and conventional instrumentation in central labs, are undoubtedly driving many developments in this area. Heavy metals represent an important group of environmental pollutants that require strict controls due to the threat they pose to ecosystems and human health. In this overview, the development of PADs for Hg monitoring, which is considered the most toxic metal in the environment, is addressed. The main emphasis is placed on recognition elements (i.e., organic chromophores/fluorophores, plasmonic nanoparticles, inorganic quantum dots, carbon quantum dots, metal nanoclusters, etc.) employed to provide suitable selectivity and sensitivity. The performance of both microfluidic paper-based analytical devices and paper-based sensors using signal readout by colorimetry and luminescence will be discussed., MInisterio de Ciencia, Innovación y Universidades | Ref. RTI2018-093697-B-I00, Xunta de Galicia | Ref. ED481D-2021-021, Xunta de Galicia | Ref. ED431I 2020/04, European Commission | Ref. P.P0000421S 140.08
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Dynamic thin-film microextraction method using cellulose platforms modified with silver nanoparticles for preconcentration of volatile hydride-forming elements prior to inductively-coupled plasma mass spectrometry determination

  • De La Calle Gonzalez, Inmaculada
  • Lourido Grovas, Andrea
  • Lavilla Beltran, Maria Isela
  • Bendicho Hernandez, Jose Carlos
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, In this work, a novel preconcentration method was developed for As, Sb and Bi following trapping of their volatile hydride derivatives onto cellulose-based platforms modified with Ag nanoparticles for ultrasensitive determination by inductively-coupled plasma mass spectrometry (ICP-MS). A continuous flow hydride generation system was coupled to a gas-liquid separation unit integrated with the preconcentration platform. AsH3, SbH3 and BiH3 were retained onto the silver nanoparticles (AgNPs) modified cellulose substrate upon catalytic decomposition. After a 10 min preconcentration time, enrichment factors of 16, 9 and 26 for As, Sb and Bi were obtained, respectively. These values can be increased when needed by a factor of three applying a preconcentration time of 30 min. Elution of analytes trapped onto AgNPs with 0.1 M HNO3 (As, Sb) or 1 M HNO3 (Bi) was performed and metal content in the eluates was measured by ICP-MS. Detection limits of 15, 2 and 1 ng/L for As, Sb and Bi were obtained, respectively. Repeatability values expressed as relative standard deviation (%) was in the range of 1.2–2.7%. Other hydrides tried (i.e. SeH2 and TeH2) did not provide suitable performance owing to inefficient desorption from the cellulose substrate. Simulated water matrices mimicking the major composition of freshwater, seawater, wastewater and groundwater were analyzed, recoveries being in the range of 80–106%., Agencia Estatal de Investigación | Ref. RTI2018-093697-B-I00
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Ultrasound-assisted dispersive micro-solid phase extraction of Pb(II) in water samples with in situ synthesis of magnetic Fe3O4-PbS nanocomposites followed by electrothermal atomic absorption spectrometry determination

  • Sanmartín, Raquel
  • Romero Rivas, Vanesa
  • Lavilla Beltran, Maria Isela
  • Bendicho Hernandez, Jose Carlos
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, Herein, an ultrasound-assisted dispersive magnetic micro-solid phase extraction (DM-μSPE) approach, along with electrothermal atomic absorption spectrometry (ETAAS) for the determination of lead at trace level in spring, well, river mineral and tap water samples was developed. The extraction step is based on the synthesis of PbS, following the sonochemical decomposition of L-cysteine used as sulphide precursor and its anchoring onto bare magnetite nanoparticles yielding the Fe3O4@PbS nanocomposite. Overall, DM-μSPE with in situ precipitation of PbS and retention onto magnetic sorbent requires a time as short as 6 min. After trapping Pb(II) as PbS, the magnetic nanocomposite was easily separated from the aqueous matrix by applying an external magnetic field and analyzed by ETAAS following slurry sampling. Different parameters involved in both the sorbent preparation/extraction and Pb quantification were optimized. Under optimal conditions, the method showed a detection limit of 0.02 μg L−1 Pb and a quantification limit of 0.07 μg L−1 Pb. The repeatability, expressed as relative standard deviation was 2% (for 0.6 μg L−1; n = 3). An experimental enrichment factor of 79 and an extraction efficiency of 99% were obtained. Finally, the method was applied for the determination of ultratrace levels of Pb(II) in spring, well, river mineral and tap water samples, showing quantitative recoveries in the range of 95–100%., Agencia Estatal de Investigación | Ref. RTI2018-093697-B-I00, Xunta de Galicia | Ref. ED481D-2021-021
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Greening sample preparation: an overview of cutting-edge contributions

  • Pena Pereira, Francisco Javier
  • Lavilla Beltran, Maria Isela
  • Bendicho Hernandez, Jose Carlos
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, Sample preparation is a paramount step of the analyticalprocess that has undergone significant improvements withinthe framework of green chemistry. The present review reportson cutting-edge advances toward greener analytical methodsinvolving sample preparation. Remarkable contributionspublished in the last two years on the implementation ofgreener solvents and adsorbents in sample preparation ap-proaches, integration of unitary steps, miniaturization, andautomation are discussed. Concluding remarks and additionalconsiderations for further improvements are also addressed., Ministerio de Ciencia, Innovación y Universidades | Ref. RTI2018-093697-B-I00, Xunta de Galicia | Ref. ED431I 2020/04
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Detection of gases and organic vapors by cellulose-based sensors

  • Pena Pereira, Francisco Javier
  • Lavilla Beltran, Maria Isela
  • De La Calle Gonzalez, Inmaculada
  • Romero Rivas, Vanesa
  • Bendicho Hernandez, Jose Carlos
The growing interest in the development of cost-effective, straightforward, and rapid analytical systems has found cellulose-based materials, including cellulose derivatives, cellulose-based gels, nanocellulosic materials, and the corresponding (nano)cellulose-based composites, to be valuable platforms for sensor development. The present work presents recent advances in the development of cellulose-based sensors for the determination of volatile analytes and derivatives of analytical relevance. In particular, strategies described in the literature for the fabrication and modification of cellulose-based substrates with responsive materials are summarized. In addition, selected contributions reported in the field of paper-based volatile sensors are discussed, with a particular emphasis on quick response (QR) code paper-based platforms, intelligent films for food freshness monitoring, and sensor arrays for volatile discrimination purposes. Furthermore, analytical strategies devised for the determination of ionic species by in situ generation of volatile derivatives in both paper-based analytical devices (PADs) and microfluidic PADs will also be described., Universidade de Vigo/CISUG, Agencia Estatal de Investigación | Ref. RTI2018-093697-B-I00
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Droplet-based luminescent sensor supported onto hydrophobic cellulose substrate for assessing fish freshness following smartphone readout

  • Villarino García, Nerea
  • Lavilla Beltran, Maria Isela
  • Pena Pereira, Francisco Javier
  • Bendicho Hernandez, Jose Carlos
In this work, two sensitive droplet-based luminescent assays with smartphone readout for the determination of trimethylamine nitrogen (TMA-N) and total volatile basic nitrogen (TVB-N) are reported. Both assays exploit the luminescence quenching of copper nanoclusters (CuNCs) produced when exposed to volatile nitrogen bases. In addition, hydrophobic-based cellulose substrates demonstrated their suitability as holders for both in-drop volatile enrichment and subsequent smartphone-based digitization of the enriched colloidal solution of CuNCs. Under optimal conditions, enrichment factors of 181 and 153 were obtained with the reported assays for TMA-N and TVB-N, respectively, leading to methodological LODs of 0.11 mg/100 g and 0.27 mg/100 g for TMA-N and TVB-N, respectively. The repeatability, expressed as RSD, was 5.2% and 5.6% for TMA-N and TVB-N, respectively (N = 8). The reported luminescent assays were successfully applied to the analysis of fish samples, showing statistically comparable results to those obtained with the reference methods of analysis., Agencia Estatal de Investigación | Ref. RTI2018-093697-B-I00, Universidade de Vigo/CISUG
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Miniaturized analytical methods for determination of environmental contaminants of emerging concern - A review

  • Pena-Pereira, Francisco
  • Bendicho, Carlos
  • Pavlović, Dragana Mutavdžić
  • Martín Esteban, Antonio
  • Díaz-Álvarez, Myriam
  • Pan, Yuwei
  • Cooper, Jon
  • Yang, Zhugen
  • Safarik, Ivo
  • Pospiskova, Kristyna
  • Segundo, Marcela A
  • Psillakis, Elefteria
31 Pág. Departamento de Medio Ambiente y Agronomía​, The determination of contaminants of emerging concern (CECs) in environmental samples has become a challenging and critical issue. The present work focuses on miniaturized analytical strategies reported in the literature for the determination of CECs. The first part of the review provides brief overview of CECs whose monitoring in environmental samples is of particular significance, namely personal care products, pharmaceuticals, endocrine disruptors, UV-filters, newly registered pesticides, illicit drugs, disinfection by-products, surfactants, high technology rare earth elements, and engineered nanomaterials. Besides, an overview of downsized sample preparation approaches reported in the literature for the determination of CECs in environmental samples is provided. Particularly, analytical methodologies involving microextraction approaches used for the enrichment of CECs are discussed. Both solid phase- and liquid phase-based microextraction techniques are highlighted devoting special attention to recently reported approaches. Special emphasis is placed on newly developed materials used for extraction purposes in microextraction techniques. In addition, recent contributions involving miniaturized analytical flow techniques for the determination of CECs are discussed. Besides, the strengths, weaknesses, opportunities and threats of point of need and portable devices have been identified and critically compared with chromatographic methods coupled to mass chromatography. Finally, challenging aspects regarding miniaturized analytical methods for determination of CECs are critically discussed., The corresponding authors thank the Spanish Ministry of Science, Innovation and Universities (Project RTI2018-093697-B-I00), the Spanish State Research Agency and FEDER for financial support. Z. Yang thanks UK NERC Fellowship grant (NE/R013349/2). M. A. Segundo acknowledges funding from Fundação para a Ciência e a Tecnologia and Ministério da Ciência, Tecnologia e Ensino Superior through grant UIDB/50006/2020., Peer reviewed