Pasar al contenido principal

METODOLOGIA PARA EL ANALISIS DE TECNOLOGIAS DE ALMACENAMIENTO DE ENERGIA TERMICA HACIA UNA ECONOMIA CIRCULAR

RTI2018-093849-B-C32

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE BARCELONA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Novel geopolymer for use as a sensible storage option in high temperature thermal energy storage systems

  • Jacob, Rhys
  • Trout, Neil
  • Solé, Aran
  • Clarke, Stephen
  • Fernández Renna, Ana Inés
  • Cabeza, Luisa F.
  • Saman, Wasim
  • Bruno, Frank
In the current study a novel geopolymer created from waste materials (namely fly ash and black slag) has been characterised as a potential high temperature thermal energy storage material option. Several geopolymer samples have been fabricated and characterised by X-ray diffraction (XRD) and scanning electron microscopy (SEM). Additionally, the density and heat capacity have been determined. Lastly, the cost of the material and packed bed system was estimated showing that the geopolymer-based systems are potentially 35% cheaper than the traditional 2-tank molten salt systems., This research was performed as part of the Australian Solar Thermal Research Institute (ASTRI), a project supported by the Australian Government, through the Australian Renewable Energy Agency (ARENA). The work was partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER)). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2014 SGR 123). GREA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This project has received funding from the European Commission Seventh Framework Programme (FP/2007-2013) under Grant agreement Nº PIRSES-GA-2013-610692 (INNOSTORAGE) and from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 657466 (INPATH-TES). Aran Solé would like to thank Ministerio de Economía y Competitividad de España for Grant Juan de la Cierva, FJCI-2015-25741. The authors would also like to acknowldege the Diopma group from the University of Barcelona thanks the funding by the Spanish Government (RTI2018-093849-B-C32), and the Catalan Government for the quality accreditation (2017 SGR 118).
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Approach for the analysis of TES technologies aiming towards a circular economy: case study of building-like cubicles

  • Boer, Dieter
  • Segarra Rubí, Mercè
  • Fernández Renna, Ana Inés
  • Vallès Rasquera, J. Manel
  • Mateu Piñol, Carles
  • Cabeza, Luisa F.
The objective of this study is to establish an initial framework to evaluate and improve the sustainability of technologies integrating thermal energy storage to come closer to a circular economy. This is applied to a case study for a building-like cubicle that includes different options of phase change materials. For the construction of a cubicle, materials can come from ores and virgin or recycled feedstock. In order to decrease the impact of materials and approach to a circular economy, the recycled content of materials at the start of life should be as high as possible. This recycled fraction in current supply depends on the available technologies for reintroducing the recycled materials in the production processes, together with virgin materials coming from primary sources. The results of the analysis show that the decrease of the environmental impact of recycling at the end of life is lower than 5%, while using recycled materials replacing virgin raw materials could reduce the overall impact by up to 30%. Most relevant materials are bricks, steel, and aluminum. Thus, reuse and recycling of materials and components must be integrated into the initial design in order to come closer to the concept of circular economy., The work partially funded by the Spanish government RTI2018-093849-B-C31, RTI2018-093849-B-C32, and RTI2018-093849-B-C33 MCIU/AEI/FEDER, UE. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (GREiA - 2017 SGR 1537, DIOPMA - 2017 SGR 118, AGACAPE - 2017 SGR 1409). GREiA and DIOPMA are certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Corrosion performance of alloy 800H and alloy 625 for potential use as molten salts solar receiver materials in concentrating solar power tower plants

  • Prieto, Cristina
  • Ruiz-Cabañas, F. Javier
  • Madina, Virginia
  • Fernández Renna, Ana Inés
  • Cabeza, Luisa F.
Two high corrosion resistant super-alloys, alloy 800H and alloy 625, were evaluated for corrosion compatibility with molten nitrate salts at 565 ◦C under air atmosphere since these super-alloys are possible candidates for the manufacturing of molten salts solar receivers in the CSP tower technology. Both alloys are tested in two different molten nitrate salts grades to identify how the impurities of the final mixture affect to corrosion damage. Accordingly, a technical grade molten nitrate salt (Solar_Salt_T) and refined molten nitrate salt (Solar_Salt_R) are selected as test media. In addition to corrosion rates calculation, techniques such as XRD, EDS, optical and scanning electron microscopy are used to identify the corrosion morphology and oxides layers chemistry. Alloy 800H and alloy 625 show uniform corrosion after testing without detecting localized phenomena such as pitting, stress corrosion cracking, crevice, or intergranular corrosion. While alloy 800H develops a duplex oxide layer consisting of iron oxides in its external part, and chromium oxide in its innermost layer, alloy 625 generates a compact and highly adherent oxide layer consisting mainly of nickel oxide. Corrosion rates decrease with time, being higher for alloys exposed to Solar_Salt_T mixtures. Moreover, alloy 625 shows lower corrosion rates than alloy 800H in all conditions tested in this study., The research leading to these results has received funding from CENIT ConSOLida. This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE and RTI2018-093849-B-C32 - MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The authors from University of Lleida and University of Barcelona would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2017 SGR 1537) and research group DIOPMA (2017 SGR 138). GREiA and DIOPMA are certified agents TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Manufacturing of nano-enhanced shape stabilized phase change materials with montmorillonite by Banbury oval rotor mixer for buildings applications

  • Salgado Pizarro, Rebeca
  • Martín Siba, Marc
  • Svobodova Sedlackova, Adela
  • Calderón, Alejandro
  • Haurie Ibarra, Laia|||0000-0002-0732-8928
  • Fernández Renna, Ana Inés
  • Barreneche, Camila
The use of adequate thermal energy storage (TES) systems has shown the potential to increase energy efficiency in many fields, such as the building sector. Shape-stabilized phase change materials (SS-PCMs) have attracted attention to address one of the key barriers of phase change materials (PCMs), the leakage during the liquid state, that nowadays limits its applicability. However, SS-PCMs still have drawbacks to overcome, such as poor fire reaction and thermal stability. In the present study, polymeric SS-PCMs are nano-enhanced with layered silicates to overcome these drawbacks. The new shape-stabilized nano-enhanced phase change material (SS-NEPCM) is based on ethylene propylene diene monomer (EPDM) as a polymeric matrix, palmitic acid (PA) as PCM and montmorillonite (MMT) as the layered silicate. An innovative method based on a Banbury mixer was used to prepare it, which is an industrially scalable fabrication method. To evaluate the effect of each component, eight different formulations were prepared: pure EPDM, EPDM with MMT additions (1 wt%, 3 wt% and 5 wt%), EPDM with PA additions (5 wt% and 10 wt%) and EPDM with MMT (3 wt%) and PA additions (5 wt% and 10 wt%). The composite materials obtained were not degraded by processing as FT-IR results show. The results obtained by X-ray diffraction showed that an ordered intercalated morphology is formed between EPDM chains and MMT. Thermogravimetric experimental results revealed an increase in the thermal stability of SS-NEPCM as a result of the barrier effect provided by MMT. Moreover, SS-NEPCM fire resistance was improved with a great reduction or avoidance of the dripping phenomenon., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Corrosion performance of alloy 800H and alloy 625 for potential use as molten salts solar receiver materials in concentrating solar power tower plants

  • Prieto, Cristina
  • Ruiz-Cabañas, F. Javier
  • Madina, Virginia
  • Fernández Renna, Ana Inés
  • Cabeza, Luisa F.
Two high corrosion resistant super-alloys, alloy 800H and alloy 625, were evaluated for corrosion compatibility with molten nitrate salts at 565 ◦C under air atmosphere since these super-alloys are possible candidates for the manufacturing of molten salts solar receivers in the CSP tower technology. Both alloys are tested in two different molten nitrate salts grades to identify how the impurities of the final mixture affect to corrosion damage. Accordingly, a technical grade molten nitrate salt (Solar_Salt_T) and refined molten nitrate salt (Solar_Salt_R) are selected as test media. In addition to corrosion rates calculation, techniques such as XRD, EDS, optical and scanning electron microscopy are used to identify the corrosion morphology and oxides layers chemistry. Alloy 800H and alloy 625 show uniform corrosion after testing without detecting localized phenomena such as pitting, stress corrosion cracking, crevice, or intergranular corrosion. While alloy 800H develops a duplex oxide layer consisting of iron oxides in its external part, and chromium oxide in its innermost layer, alloy 625 generates a compact and highly adherent oxide layer consisting mainly of nickel oxide. Corrosion rates decrease with time, being higher for alloys exposed to Solar_Salt_T mixtures. Moreover, alloy 625 shows lower corrosion rates than alloy 800H in all conditions tested in this study., The research leading to these results has received funding from CENIT ConSOLida. This work was partially funded by the Ministerio de Ciencia, Innovación y Universidades de España (RTI2018-093849-B-C31 - MCIU/AEI/FEDER, UE and RTI2018-093849-B-C32 - MCIU/AEI/FEDER, UE) and by the Ministerio de Ciencia, Innovación y Universidades - Agencia Estatal de Investigación (AEI) (RED2018-102431-T). The authors from University of Lleida and University of Barcelona would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2017 SGR 1537) and research group DIOPMA (2017 SGR 138). GREiA and DIOPMA are certified agents TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Approach for the analysis of TES technologies aiming towards a circular economy: case study of building-like cubicles

  • Boer, Dieter
  • Segarra Rubí, Mercè
  • Fernández Renna, Ana Inés
  • Vallès Rasquera, J. Manel
  • Mateu Piñol, Carles
  • Cabeza, Luisa F.
The objective of this study is to establish an initial framework to evaluate and improve the sustainability of technologies integrating thermal energy storage to come closer to a circular economy. This is applied to a case study for a building-like cubicle that includes different options of phase change materials. For the construction of a cubicle, materials can come from ores and virgin or recycled feedstock. In order to decrease the impact of materials and approach to a circular economy, the recycled content of materials at the start of life should be as high as possible. This recycled fraction in current supply depends on the available technologies for reintroducing the recycled materials in the production processes, together with virgin materials coming from primary sources. The results of the analysis show that the decrease of the environmental impact of recycling at the end of life is lower than 5%, while using recycled materials replacing virgin raw materials could reduce the overall impact by up to 30%. Most relevant materials are bricks, steel, and aluminum. Thus, reuse and recycling of materials and components must be integrated into the initial design in order to come closer to the concept of circular economy., The work partially funded by the Spanish government RTI2018-093849-B-C31, RTI2018-093849-B-C32, and RTI2018-093849-B-C33 MCIU/AEI/FEDER, UE. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (GREiA - 2017 SGR 1537, DIOPMA - 2017 SGR 118, AGACAPE - 2017 SGR 1409). GREiA and DIOPMA are certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Novel geopolymer for use as a sensible storage option in high temperature thermal energy storage systems

  • Jacob, Rhys
  • Trout, Neil
  • Solé, Aran
  • Clarke, Stephen
  • Fernández Renna, Ana Inés
  • Cabeza, Luisa F.
  • Saman, Wasim
  • Bruno, Frank
In the current study a novel geopolymer created from waste materials (namely fly ash and black slag) has been characterised as a potential high temperature thermal energy storage material option. Several geopolymer samples have been fabricated and characterised by X-ray diffraction (XRD) and scanning electron microscopy (SEM). Additionally, the density and heat capacity have been determined. Lastly, the cost of the material and packed bed system was estimated showing that the geopolymer-based systems are potentially 35% cheaper than the traditional 2-tank molten salt systems., This research was performed as part of the Australian Solar Thermal Research Institute (ASTRI), a project supported by the Australian Government, through the Australian Renewable Energy Agency (ARENA). The work was partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER)). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2014 SGR 123). GREA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This project has received funding from the European Commission Seventh Framework Programme (FP/2007-2013) under Grant agreement Nº PIRSES-GA-2013-610692 (INNOSTORAGE) and from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 657466 (INPATH-TES). Aran Solé would like to thank Ministerio de Economía y Competitividad de España for Grant Juan de la Cierva, FJCI-2015-25741. The authors would also like to acknowldege the Diopma group from the University of Barcelona thanks the funding by the Spanish Government (RTI2018-093849-B-C32), and the Catalan Government for the quality accreditation (2017 SGR 118).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Manufacturing of nano-enhanced shape stabilized phase change materials with montmorillonite by Banbury oval rotor mixer for buildings applications

  • Salgado Pizarro, Rebeca
  • Martín Siba, Marc
  • Svobodova Sedlackova, Adela
  • Calderón, Alejandro
  • Haurie Ibarra, Laia
  • Fernández Renna, Ana Inés
  • Barreneche, Camila
The use of adequate thermal energy storage (TES) systems has shown the potential to increase energy efficiency in many fields, such as the building sector. Shape-stabilized phase change materials (SS-PCMs) have attracted attention to address one of the key barriers of phase change materials (PCMs), the leakage during the liquid state, that nowadays limits its applicability. However, SS-PCMs still have drawbacks to overcome, such as poor fire reaction and thermal stability. In the present study, polymeric SS-PCMs are nano-enhanced with layered silicates to overcome these drawbacks. The new shape-stabilized nano-enhanced phase change material (SS-NEPCM) is based on ethylene propylene diene monomer (EPDM) as a polymeric matrix, palmitic acid (PA) as PCM and montmorillonite (MMT) as the layered silicate. An innovative method based on a Banbury mixer was used to prepare it, which is an industrially scalable fabrication method. To evaluate the effect of each component, eight different formulations were prepared: pure EPDM, EPDM with MMT additions (1 wt%, 3 wt% and 5 wt%), EPDM with PA additions (5 wt% and 10 wt%) and EPDM with MMT (3 wt%) and PA additions (5 wt% and 10 wt%). The composite materials obtained were not degraded by processing as FT-IR results show. The results obtained by X-ray diffraction showed that an ordered intercalated morphology is formed between EPDM chains and MMT. Thermogravimetric experimental results revealed an increase in the thermal stability of SS-NEPCM as a result of the barrier effect provided by MMT. Moreover, SS-NEPCM fire resistance was improved with a great reduction or avoidance of the dripping phenomenon., Peer Reviewed, Postprint (published version)