Pasar al contenido principal

INGENIERIA DE MATERIALES MEDIANTE TECNOLOGIAS VERDES Y EMERGENTES PARA APLICACIONES BIOMEDICAS

RTI2018-094131-A-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDADE DE SANTIAGO DE COMPOSTELA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Bioaerogels: Promising Nanostructured Materials in Fluid Management, Healing and Regeneration of Wounds

  • Bernardes, Beatriz
  • Gaudio, Pasquale del
  • Alves, Paulo
  • Costa, Raquel
  • García González, Carlos A.
  • Oliveira, Ana
Wounds affect one’s quality of life and should be managed on a patient-specific approach, based on the particular healing phase and wound condition. During wound healing, exudate is produced as a natural response towards healing. However, excessive production can be detrimental, representing a challenge for wound management. The design and development of new healing devices and therapeutics with improved performance is a constant demand from the healthcare services. Aerogels can combine high porosity and low density with the adequate fluid interaction and drug loading capacity, to establish hemostasis and promote the healing and regeneration of exudative and chronic wounds. Bio-based aerogels, i.e., those produced from natural polymers, are particularly attractive since they encompass their intrinsic chemical properties and the physical features of their nanostructure. In this work, the emerging research on aerogels for wound treatment is reviewed for the first time. The current scenario and the opportunities provided by aerogels in the form of films, membranes and particles are identified to face current unmet demands in fluid managing and wound healing and regeneration
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Supercritical CO2 technology for one-pot foaming and sterilization of polymeric scaffolds for bone regeneration

  • Santos Rosales, Víctor
  • Magariños Ferro, Beatriz
  • Starbird-Perez, Ricardo
  • Suárez González, Javier
  • Fariña, José B.
  • Álvarez Lorenzo, Carmen
  • García González, Carlos A.
Sterilization is a quite challenging step in the development of novel polymeric scaffolds for regenerative medicine since conventional sterilization techniques may significantly alter their morphological and physicochemical properties. Supercritical (sc) sterilization, i.e. the use of scCO2 as a sterilizing agent, emerges as a promising sterilization method due to the mild operational conditions and excellent penetration capability. In this work, a scCO2 protocol was implemented for the one-pot preparation and sterilization of poly(-caprolactone) (PCL)/poly(lactic-co-glycolic acid) (PLGA) scaffolds. The sterilization conditions were established after screening against both Gram-positive (Staphylococcus aureus) and Gram-negative (Escherichia coli, Pseudomonas aeruginosa) vegetative bacteria and spores of Bacillus stearothermophilus, Bacillus pumilus and Bacillus atrophaeus. The transition from the sterilization conditions (140 bar, 39 °C) to the compressed foaming (60 bar, 26 °C) was performed through controlled depressurization (3.2 bar/min) and CO2 liquid flow. Controlled depressurization/pressurization cycles were subsequently applied. Using this scCO2 technology toolbox, sterile scaffolds of well-controlled pore architecture were obtained. This sterilization procedure successfully achieved not only SAL-6 against well-known resistant bacteria endospores but also improved the scaffold morphologies compared to standard gamma radiation sterilization procedures
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Insights on toxicity, safe handling and disposal of silica aerogels and amorphous nanoparticles

  • Vareda, João P.
  • García González, Carlos A.
  • Valente, Artur J. M.
  • Simón Vázquez, Rosana
  • Stipetic, Marina
  • Durães, Luisa
Amorphous forms of silica have always raised a lot of interest by the scientific community and are nowadays rapidly growing in commercial applications. These are commercialized as aerogels or as nanoparticles, which can feature many similarities, not only in the synthesis process but also because clusters of nanoparticles are commonly released from aerogels. Nevertheless, the health effects of amorphous silica materials are not fully understood, as occurs with many other nanoforms. Amorphous silica is known to be less toxic than its crystalline form, but toxicity studies, regulatory aspects and handling practices are still scarce. In this work, the knowledge on toxicity of amorphous silica nanostructures and suitable regulations are reviewed. Furthermore, relevant safety practices for handling these materials are discussed and strategies used to recycle and dispose them are summarized., European Regional Development Fund (ERDF) | Ref. CENTRO-01-0145-FEDER-029533, Fundação para a Ciência e a Tecnologia | Ref. PTDC / EQU-EQU / 29533/2017, European Commission y Fundação para a Ciência e a Tecnologia | Ref. POCI-01-0145-FEDER-032061, European Commission y Fundação para a Ciência e a Tecnologia | Ref. PTDC / ECI-EGC / 32061/2017, Xunta de Galicia | Ref. ED431F 2016/010, Xunta de Galicia | Ref. ED431C 2020/17, Ministerio de Ciencia, Innovación y Universidades | Ref. RTI2018-094131-A-I00, Fundação para a Ciência e Tecnologia | Ref. SFRH / BD / 131280/2017, European Commission y Consejo Superior de Investigaciones Científicas | Ref. RYC2014-15239, Fundação para a Ciência e Tecnologia | Ref. POCI-01-0145-FEDER- 006910, Fundação para a Ciência e Tecnologia | Ref. POCI-01-0145-FEDER-007630
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Stability studies of starch aerogel formulations for biomedical applications

  • Santos-Rosales, Víctor
  • Álvarez-Rivera, Gerardo
  • Hillgärtner, Markus
  • Cifuentes, Alejandro
  • Itskov, Mikhail
  • García-González, Carlos A.
  • Rege, Ameya
Starch aerogels are attractive materials for biomedical applications because of their low density and high open porosity coupled with high surface areas. However, the lack of macropores in conventionally manufactured polysaccharide aerogels is a limitation to their use as scaffolds for regenerative medicine. Moreover, the stability under storage of polysaccharide aerogels is critical for biomedical purposes and scarcely studied so far. In this work, the induction of a new macropore population (1–2 μm) well integrated into the starch aerogel backbone was successfully achieved by the incorporation of zein as a porogen. The obtained dual-porous aerogels were evaluated in terms of composition as well as morphological, textural, and mechanical properties. Stability of aerogels upon storage mimicking the zone II (25 °C, 65% relative humidity) according to the International Council for Harmonization guideline of climatic conditions was checked after 1 and 3 months from morphological, physicochemical, and mechanical perspectives. Zein incorporation induced remarkable changes in the mechanical performance of the end aerogel products and showed a preventive effect on the morphological changes during the storage period., This research was funded by Xunta de Galicia [ED431F 2016/010; ED431C 2020/17], MCIUN [RTI2018-094131-A-I00], Agrupación Estratégica de Materiales [AeMAT-BIOMEDCO2, ED431E 2018/08], Agencia Estatal de Investigación [AEI], and FEDER funds. V.S.-R. acknowledges Xunta de Galicia (Consellería de Cultura, Educación e Ordenación Universitaria) for a predoctoral research fellowship [ED481A-2018/014]. C.A.G.-G. acknowledges MINECO for a Ramón y Cajal fellowship [RYC2014-15239]. The authors would like to thank Roquette (Spain) for kindly providing the starch and Plataforma Proteómica-Metabolómica (CEI-UAM + CSIC) for the zein analysis. Work was carried out in the frame of the COST Action CA18125 “Advanced Engineering and Research of aeroGels for Environment and Life Sciences” (AERoGELS) and funded by the European Commission., Peer reviewed