Pasar al contenido principal

DESIGN, ENGINEERING AND ASSESSMENT OF HYBRID NANOSTRUCTURED MATERIALS USING HIGH PRESSURE TECHNOLOGY FOR LIFE SCIENCE APPLICATIONS

RYC-2014-15239

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprograma Subprograma Estatal de Incorporación
Convocatoria Ramón y Cajal
Año convocatoria 2014
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSIDADE DE SANTIAGO DE COMPOSTELA
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Supercritical CO2 technology for one-pot foaming and sterilization of polymeric scaffolds for bone regeneration

  • Santos Rosales, Víctor
  • Magariños Ferro, Beatriz
  • Starbird-Perez, Ricardo
  • Suárez González, Javier
  • Fariña, José B.
  • Álvarez Lorenzo, Carmen
  • García González, Carlos A.
Sterilization is a quite challenging step in the development of novel polymeric scaffolds for regenerative medicine since conventional sterilization techniques may significantly alter their morphological and physicochemical properties. Supercritical (sc) sterilization, i.e. the use of scCO2 as a sterilizing agent, emerges as a promising sterilization method due to the mild operational conditions and excellent penetration capability. In this work, a scCO2 protocol was implemented for the one-pot preparation and sterilization of poly(-caprolactone) (PCL)/poly(lactic-co-glycolic acid) (PLGA) scaffolds. The sterilization conditions were established after screening against both Gram-positive (Staphylococcus aureus) and Gram-negative (Escherichia coli, Pseudomonas aeruginosa) vegetative bacteria and spores of Bacillus stearothermophilus, Bacillus pumilus and Bacillus atrophaeus. The transition from the sterilization conditions (140 bar, 39 °C) to the compressed foaming (60 bar, 26 °C) was performed through controlled depressurization (3.2 bar/min) and CO2 liquid flow. Controlled depressurization/pressurization cycles were subsequently applied. Using this scCO2 technology toolbox, sterile scaffolds of well-controlled pore architecture were obtained. This sterilization procedure successfully achieved not only SAL-6 against well-known resistant bacteria endospores but also improved the scaffold morphologies compared to standard gamma radiation sterilization procedures
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Insights on toxicity, safe handling and disposal of silica aerogels and amorphous nanoparticles

  • Vareda, João P.
  • García González, Carlos A.
  • Valente, Artur J. M.
  • Simón Vázquez, Rosana
  • Stipetic, Marina
  • Durães, Luisa
Amorphous forms of silica have always raised a lot of interest by the scientific community and are nowadays rapidly growing in commercial applications. These are commercialized as aerogels or as nanoparticles, which can feature many similarities, not only in the synthesis process but also because clusters of nanoparticles are commonly released from aerogels. Nevertheless, the health effects of amorphous silica materials are not fully understood, as occurs with many other nanoforms. Amorphous silica is known to be less toxic than its crystalline form, but toxicity studies, regulatory aspects and handling practices are still scarce. In this work, the knowledge on toxicity of amorphous silica nanostructures and suitable regulations are reviewed. Furthermore, relevant safety practices for handling these materials are discussed and strategies used to recycle and dispose them are summarized., European Regional Development Fund (ERDF) | Ref. CENTRO-01-0145-FEDER-029533, Fundação para a Ciência e a Tecnologia | Ref. PTDC / EQU-EQU / 29533/2017, European Commission y Fundação para a Ciência e a Tecnologia | Ref. POCI-01-0145-FEDER-032061, European Commission y Fundação para a Ciência e a Tecnologia | Ref. PTDC / ECI-EGC / 32061/2017, Xunta de Galicia | Ref. ED431F 2016/010, Xunta de Galicia | Ref. ED431C 2020/17, Ministerio de Ciencia, Innovación y Universidades | Ref. RTI2018-094131-A-I00, Fundação para a Ciência e Tecnologia | Ref. SFRH / BD / 131280/2017, European Commission y Consejo Superior de Investigaciones Científicas | Ref. RYC2014-15239, Fundação para a Ciência e Tecnologia | Ref. POCI-01-0145-FEDER- 006910, Fundação para a Ciência e Tecnologia | Ref. POCI-01-0145-FEDER-007630