Pasar al contenido principal

VALORIZACION DE BIOMASA MEDIANTE PROCESOS CATALITICOS HETEROGENEOS AVANZADOS

RTI2018-094918-B-C41

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hydrogenation of Furfural to Cyclopentanone in Tert–Butanol-Water Medium: A Study of the Reaction Intermediates Reactivity Using Cu/ZnO/Al2O3 as Catalyst

  • Orozco-Saumell, Ana
  • Mariscal López, Rafael
  • Vila, Francisco
  • López Granados, Manuel
  • Martín Alonso, David
The catalytic transformation of furfural to cyclopentanone has been investigated using two different liquid phases as solvent: water and 30 wt.% tert–butanol in water. When using neat water at 160 °C, 40 bar of H2, and after 2 h of reaction time, furfural polymerizes, and the yield of cyclopentanone is just 42% with a low carbon balance, indicating that furfural is transformed to non-detected by-products, likely heavy resins. When using 30 wt.% tert–butanol in water, the yield of cyclopentanone is ca. 20%, and the major product is furfuryl alcohol with a 47% yield. We have studied the catalytic transformation of the most relevant reaction intermediates in the overall conversion of furfural to cyclopentanone. In the presence of tert–butanol, two steps are inhibited in the overall pathway: (i) the Piancatelli rearrangement of furfuryl alcohol and (ii) the transformation of cyclopentenone. This inhibition is attributed to the neutralization of protons from water dissociation by surface sites on the catalyst, preventing their participation in the overall reaction. To counteract these inhibitions when tert–butanol is present, higher H2 pressure (60 bar) and temperatures (200 °C) are required. We have been able to obtain productivities per gram of catalyst and mols of Cu basis of 411 gprod·h−1·gcat−1 and 14 gprod·s−1·molCu−1, respectively, which is substantially above that found for other copper-based catalysts., This research was funded by the Spanish Ministry of Science, Innovation, and Universities (projects RTI2018-094918-B-C41, -C42 and -C44). AOS also acknowledges financial support for a contract financed by the Biobased Industries Joint Undertaking (JU) under the European Union’s Horizon 2020 research and innovation program under grant agreement No. 101023202. The JU receives support from the European Union’s Horizon 2020 research and innovation program and the Bio-based Industries Consortium., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The relevance of Lewis acid sites on the gas phase reaction of levulinic acid into ethyl valerate using CoSBA-xAl bifunctional catalysts

  • Muñoz-Olasagasti, M.
  • López Granados, Manuel
  • Jiménez-Gómez, C.P.
  • Cecilia, J.A.
  • Maireles-Torres, P.
  • Dumesic, J.A.
  • Mariscal López, Rafael
A series of Co supported on Al-modified SBA-15 catalysts has been studied in the gas phase direct transformation of levulinic acid (LA) into ethyl valerate (EV) using a continuous fixed-bed reactor and ethanol as solvent. It was observed that once the intermediate product gamma-valerolactone (GVL) has been formed, the presence of aluminum is required for the selective transformation to EV. Three Lewis acid sites (LAS) are identified (from highest to lowest acid strength): aluminum ions in tetrahedral and octahedral coordination and Co2+sites. The intrinsic activity of these LAS for the key reaction, the GVL ring opening, decreases with the strength of these acid sites, but so does the undesirable formation of coke, also catalyzed by these centers. The best catalyst was that with the highest Al content, CoSBA-2.5Al, that reached an EV yield of up to 70%. This result is associated with the presence of LAS attributed to the presence of Co2+surface species that, although having low intrinsic activity in the selective GVL ring-opening reaction, are highly concentrated in this sample and also possess less activity in the undesirable and deactivating formation of coke. These Co2+LAS have been stabilized by incorporation of aluminum into the support, modifying the reducibility and dispersion of cobalt species. Additionally, the lower proportion of metallic Co species decreases the hydrogenating capacity of this catalyst. This decrease is a positive result because it prevents GVL hydrogenation to undesired products. This catalyst also showed promising stability in a 140 h on-stream run. © The Royal Society of Chemistry 2021., Financial support from the Spanish Ministry of Economy and Competitiveness (RTI2018-94918-B-C41/C43) is gratefully acknowledged. R. M. also thanks the Ministry of Education, Culture and Sports for a “Salvador de Madariaga” grant (PRX16/00167) and the Fulbright Commission in Spain for co-financing his stay at UW-Madison., Supplementary material, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Self-condensation of levulinic acid into bio-jet fuel precursors over acid zeolites: Elucidating the role of nature, strength and density of acid sites

  • Juárez, Pablo
  • López-Aguado, Clara
  • Paniagua, Marta
  • Melero, Juan Antonio
  • Mariscal López, Rafael
  • Morales, Gabriel
The production of jet-fuel precursors from the aldol-dimerization of levulinic acid (LA) over acid zeolites is presented. Under solventless conditions, high LA conversion with selectivities to LA dimers > 90% are achieved. Chemisorption and spectroscopic analyses of the materials have revealed a cooperative effect between strong Brønsted (BS) and strong Lewis (LS) acid sites, which favors the selective formation of dimers. BEA structure is the most efficient owing to shape selectivity effect. H-Beta 19, having an optimum Brønsted to Lewis acid sites ratio and the adequate balance of BS/LS acid sites, displayed the best catalytic performance in terms of activity and selectivity to LA dimers. Under optimized reaction conditions H-Beta 19 achieved 79% LA conversion and > 98% selectivity. An analysis on the stability showed good reusability in consecutive reaction cycles. The small loss of activity, ascribed to the formation of organic deposits, can be reverted by calcination in air. © 2022 Elsevier B.V., Financial support from the Spanish Ministry of Science and Innovation, grant numbers RTI2018–094918-B-C42 and RTI2018–094918-B-C41; the Regional Government of Madrid, grant number P2018/EMT-4344; and University Rey Juan Carlos (Young Researchers R&D Project ref. M2181-BIOCAVI) is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Elucidating the roles of acid site nature and strength in the direct conversion of levulinic acid into ethyl valerate: the case of Zr-modified beta zeolite-supported Pd catalysts

  • Muñoz-Olasagasti, M.
  • Martínez-Salazar, I.
  • López Granados, Manuel
  • López-Aguado, Clara
  • Iglesias, José
  • Morales, Gabriel
  • Mariscal López, Rafael
The effects of the nature and strength of surface acid sites on the properties of the catalyst used for the one-pot conversion of levulinic acid to valeric biofuels have been investigated. The acid supports were prepared from a commercial beta zeolite (HBEA) modified by partial substitution of Al by Zr atoms. This procedure enables changes in the nature and strength of the acidic sites of the starting zeolite. A constant amount of Pd (2 wt%) was incorporated on these acid supports by the incipient wetness impregnation method. These catalysts were tested in liquid phase reactions and the Pd/HBEA catalyst showed the best catalytic performance, achieving an 80% yield of valeric biofuel after 2 h of the reaction. The fresh catalysts were characterized by DRIFT spectroscopy using pyridine, CD3CN, and CO as probe molecules and by XRD to explain the differences in catalytic performance. The presence of strong Brønsted acid sites (BAS) was shown to be critical for reaching high ethyl valerate yields since the differences in catalytic behavior and the concentration of these acid sites parallel each other. Up to three types of Lewis acid sites (LAS) of different strengths were also identified. These LAS have also been shown to be active, although their intrinsic activities decrease as they are weaker. Reutilization tests of the Pd/HBEA catalyst were also carried out and mild deactivation was observed. The spent catalyst underwent a simple calcination treatment at 773 K and this was adequate for the recovery of the surface acidity, but the reducibility of the Pd species was affected. This prevented complete recovery of catalytic activity. © The Royal Society of Chemistry, Grants RTI2018-094918-B-C41 and RTI2018-094918-B-C42 by MCIN/AEI/10.13039/501100011033 and the Regional Government of Madrid (project S2018/EMT-4344) are kindly acknowledged for funding this research. MMO and IMS, due to the CSIC-UAM framework agreement, thank Ph.D. Program in Applied Chemistry, Doctoral School of Autonomous University of Madrid., Supplementary material, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Aqueous phase hydrogenation of maleic acid to succinic acid mediated by formic acid: the robustness of the Pd/C catalytic system

  • Orozco-Saumell, Ana
  • Mariscal López, Rafael
  • Iglesias, J.
  • Maireles-Torres, P.
  • López Granados, Manuel
Long-term liquid phase studies of the activity in the formic acid-mediated hydrogenation of MAc to SAc were conducted in a fixed bed continuous reactor for two relevant situations: neutralising maleic and formic acids with NaOH and at the pH determined by both acids. Deactivation could only be observed when the catalyst was subjected to a WHSV of MAc above 13 gMAc gcat−1 h−1. Despite this deactivation, the reaction conditions can be adjusted (lowering the reaction temperature and/or decreasing the WHSV) to compensate for the loss of activity. Thus, for the neutralisation case, the catalyst could present a yield of SAc close to 100% for at least 400 h at a WHSV-MAc of 13 gMAc gcat−1 h−1 by setting the temperature at 180 °C, corresponding to an overall productivity above 5300 g of SAc per gcat, equivalent to more than 107 kg of SAc per gPd. An in-depth study of the catalyst used under these severe conditions was also conducted using a number of physico-chemical techniques. The sintering of Pd particles, Pd leaching, reduction-carbidization of Pd2+ and/or Pd into Pd carbides (PdCx) and deposition of organic compounds were identified in the spent catalysts for both the neutralised and acid runs. The presence of Na+ and of CO chemisorbed at the surface of the catalyst were also detected in the neutralised and acid cases, respectively. The rinsing of the catalyst with aqueous H2SO4 or treating the catalyst at 200 °C with streams containing O2 or H2 did not reactivate the catalyst. We concluded that the relevant causes of deactivation are Pd leaching and deposits of organic compounds; CO poisoning is also likely in the acid case. This is in agreement with the fact that deactivation is detected under high MAc-WHSV: the rate of leaching, CO chemisorption and deposition accelerates upon increasing it. © 2022 The Royal Society of Chemistry., This research was funded by the Spanish Ministry of Science, Innovation, and Universities (projects RTI2018-094918-B-C41, -C42 and -C44) and the Regional Government of Madrid (Project BIOTRES-CM S2018/EMT-4344). This project has also received funding from the Biobased Industries Joint Undertaking (JU) under the European Union's Horizon 2020 research and innovation programme under grant agreement no. 101023202. The JU receives support from the European Union's Horizon 2020 research and innovation programme and the Biobased Industries Consortium. AOS, due to the CSIC-UAM framework agreement, thanks to the PhD Program in Applied Chemistry of Doctoral School of Autonomous University of Madrid., Supplementary material, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Catalytic Conversion of Cyclopentanone into Dimethyl Adipate over Solid Basic Catalysts with Dimethyl Carbonate

  • Martínez-Salazar, Irene
  • Orozco-Saumell, Ana
  • López Granados, Manuel
  • Mariscal López, Rafael
This article belongs to the Special Issue Catalytical Methods for the Production of Fine and Bulk Chemicals and Biomaterials from Biomass, The synthesis of dimethyl adipate (DAP), a stable configuration of adipic acid, from biomass-derived cyclopentanone (CPO) and dimethyl carbonate (DMC) constitutes an attractive greener route than petroleum-based industrial processes. Solid basic catalysts such as MgO, Mg5(CO3)4(OH)2·4H2O, KOCH3 and Ca(OCH3)2 have been used achieving a DAP yield up to 30% at 533 K. In addition to the type of catalyst, other operating conditions such as the substrate, reaction time, temperature and CPO concentration have been studied. The methylation of DAP and CPO and the self-aldol condensation of CPO to form dimers and oligomers are reactions that occur in parallel with the production of DAP. It has been established that the main challenge is the self-aldol condensation of CPO. It has been identified that at short reaction times, to prevent methylation, and at dilute concentrations, to avoid CPO self-condensation, the DAP formation rate is much higher than these other competitive reactions. Finally, it should be noted that a DAP productivity up to 3.45 g·gcat−1·h−1 has been achieved under mild conditions. © 2024 by the authors., This research was funded by the Spanish Ministry of Science, Innovation and Universities, through the projects RTI2018-094918-B-C41 and PID2021-122736OB-C41., Supplementary material, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Catalytic Transfer Hydrogenation of Glucose to Sorbitol with Raney Ni Catalysts Using Biomass-Derived Diols as Hydrogen Donors

  • García, Beatriz
  • Orozco-Saumell, Ana
  • López Granados, Manuel
  • Moreno, Jovita
  • Iglesias, Jose
The catalytic transfer hydrogenation (CTH) of glucose to sorbitol has been studied using a wide collection of different biomass-derived alcohols and diols as hydrogen donors. Catalytic activity results reflect the feasibility to conduct this transformation in the presence of conventional, commercially available Raney Ni-type sponges as catalysts. Sacrificial diols displayed a superior performance as hydrogen donors as compared to short-chain alcohols, including secondary alcohols. Among them, terminal diols such as 1,4-butanediol and 1,5-pentanediol were revealed as excellent hydrogen donors, providing a high selectivity in the conversion of glucose into sorbitol. As for the catalysts, molybdenum promotion provided a very high catalytic activity to sponge nickel catalysts, even under mild temperature conditions. The transformation was also studied in a fixed-bed reactor under continuous-flow operation conditions. Results demonstrate that the catalysts are highly stable and able to operate for at least 550 h on stream with a high selectivity in the CTH of glucose to sorbitol., This research was funded by the Spanish Ministry of Science, Innovation, and Universities (projects RTI2018-094918-B-C41 and RTI2018-094918-B-C42) and by the Regional Government of Madrid (Project BIOTRES-CM S2018/EMT-4344). Johnson Matthey Processes Technologies are kindly acknowledged for providing Raney Ni-type sponge catalysts., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Integrated Environmental and Exergoeconomic Analysis of Biomass-Derived Maleic Anhydride

  • Blanco, Jorge
  • Millán-Linares, María del Carmen
  • López Granados, Manuel
  • Agirre, Ion
  • Gandarias, Iñaki
  • Arias, Pedro Luis
  • Iglesias, Jose
  • Moreno, Jovita
  • Sánchez-García, Alicia
Life cycle analysis and exergy analysis are applied to compare the production of maleic anhydride from different feedstock, both biomass- and petrochemical-derived raw materials, in order to evaluate the sustainability of alternative biorefinery processes to conventional routes. The considered processes involve two options: gas and aqueous phase furfural oxidation with oxygen (air) and hydrogen peroxide as oxidants, respectively, considered as sustainable technologies because of the use of renewable feedstock. Conventional routes, used as benchmarks, include the current production processes using benzene or butane as raw materials. The results show that the aqueous phase process is far from being viable from an energy and environmental point of view due to the high exergy destruction and the use of H<inf>2</inf>O<inf>2</inf> as oxidant (whose production entails important environmental drawbacks). On the contrary, the gas phase oxidation of furfural shows competitive results with petrochemical technologies. Nevertheless, the major environmental drawback of the new furfural-to-maleic anhydride production processes is detected on the environmental profile of the starting raw material. The results suggest that a better environmental footprint for maleic anhydride production in gas phase can be obtained if environmentally friendly furfural production technologies are used at the commercial scale., This research was funded by the Spanish Ministry of Science, Innovationand Universities (projects RTI2018-094918-B-C41, RTI2018-094918-B-C42,and RTI2018-094918-B-C43)., Peer reviewed