Pasar al contenido principal

DESARROLLO DE ESTRATEGIAS EFICIENTES PARA EL TRATAMIENTO DE AGUAS MEDIANTE PROCESOS FOTOCATALITICOS CON LUZ SOLAR

RTI2018-094958-B-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Lead-free low-melting-point glass as bonding agent for TiO2 nanoparticles

  • Lopez-Esteban, S.
  • Cabal, B.
  • Bartolomé, J.F.
  • Fernandez, A.
  • Faraldos, M.
  • Bahamonde, A.
  • Moya, J.S.
  • Pecharroman, C.
  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
[EN] This work is a study of the properties of TiO2-anatase nanoparticles attached by a low-melting point inorganic glass (530 degrees C). Unlike other low-melting glasses, this composition does not contain any toxic metal. Likewise, it shows an excellent wettability on ceramic nanoparticles. A small addition of 5 vol% of glass remarkably enhances the mechanical strength of the composites with respect to pure TiO2 calcined at the same temperature, becoming twice this value. Self-cleaning properties analyzed using the methylene blue 385 nm UV-A photodegradation test showed that, after different UV-light periods, the photo-efficiency of TiO2-anatase was not altered by the presence of this glass., This work was supported by CSIC under grant 201960E103 and by the Spanish Ministry of Science Innovation and Universities (MCIU/AEI/FEDER, UE) under award RTI2018-094958-B-I00. Dr. Borrell acknowledges the Spanish Ministry of Economy and Competitiveness for her RyC contract (RYC-2016-20915).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Lead-free low-melting-point glass as bonding agent for TiO2 nanoparticles

  • López-Esteban, Sonia
  • Cabal, Belén
  • Borrell, Amparo
  • Bartolomé, Jose F.
  • Fernández, Adolfo
  • Faraldos, Marisol
  • Bahamonde, A.
  • Moya, J. S.
  • Pecharromán, Carlos
This work is a study of the properties of TiO2-anatase nanoparticles attached by a low-melting point inorganic glass (530°C). Unlike other low-melting glasses, this composition does not contain any toxic metal. Likewise, it shows an excellent wettability on ceramic nanoparticles. A small addition of 5 vol% of glass remarkably enhances the mechanical strength of the composites with respect to pure TiO2 calcined at the same temperature, becoming twice this value. Self-cleaning properties analyzed using the methylene blue 385 nm UV-A photodegradation test showed that, after different UV-light periods, the photo-efficiency of TiO2-anatase was not altered by the presence of this glass., This work was supported by CSIC under grant 201960E103 and by the Spanish Ministry of Science Innovation and Universities (MCIU/AEI/FEDER, UE) under award RTI2018-094958-B-I00. Dr. Borrell acknowledges the Spanish Ministry of Economy and Competitiveness for her RyC contract (RYC-2016-20915)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Peroxymonosulfate activation by Co3O4coatings for imidacloprid degradation in a continuous flow-cell reactor under simulated solar irradiation

  • Silva, R.R.M.
  • Valenzuela, Laura
  • Rosal, R.
  • Ruotolo, L.A.M.
  • Nogueira, F.G.E.
  • Bahamonde, A.
In this work, a Co3O4 coating prepared by precipitation and vacuum filtration was applied to photoactivate peroxymonosulfate (PMS), for the degradation of imidacloprid (IMD) under continuous-flow conditions. The effects of PMS concentration, flow rate, and type of irradiation were evaluated. Under optimal conditions (0.2 gPMS L-1, 0.1 mL min-1, and simulated solar irradiation), 99% IMD photodegradation was achieved after 2 h of operation. The outstanding performance of the Co3O4/PMS/solar irradiation process was attributed to the synergistic activation of PMS by Co2+ and Co3+ species in the Co3O4 catalyst and the UV component of solar irradiation, in either the homogeneous phase or following the adsorption of PMS onto Co3O4. Quenching experiments revealed that sulfate and superoxide radicals, as well as singlet oxygen, were the main active species responsible for IMD oxidation. Measurements using HPLC-high resolution mass spectrometry enabled the identification of eight intermediate products, allowing the proposal of a degradation pathway. The combination of solar light, Co3O4, and PMS is a simple and low-cost approach with the potential to treat effluents containing harmful pollutants. © 2023 Elsevier Ltd., The authors are grateful for financial support provided by the National Council of Technological and Scientific Development, Brazil (CNPq, grant number 142087/2019–0), and MCIN/AEI//10.13039/ 501100011033, RTI2018–094958-B-I00. R. R. Maciel-Silva thanks Coordenaç˜ao de Aperfeiçoamento de Pessoal de Nível Superior, Brazil, for a sandwich doctorate scholarship (CAPES, grant number 88887.571964/2020–00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Critical review on the use of photocatalysis and photoelectrocatalysis to create antimicrobial surfaces

  • Valenzuela, Laura
  • Faraldos, Marisol
  • Bahamonde, A.
  • Rosal, Roberto
Infectious diseases are still a major cause of death worldwide. One way of fighting against infectious agents is to develop intrinsically antimicrobial materials to reduce the risk of pathogen spreading through contact with surfaces. Photoactive coatings offer the possibility to produce long-lasting antimicrobial surfaces that destroy microorganisms or biofilm matrices due to the production of highly reactive substances when exposed to ultraviolet light or solar radiation. This review reports a selection of recent works using materials deposited on different substrates to act as photocatalytic or photoelectrocatalytic coatings. Bandgap engineering with the introduction of dopants, or the creation of different junctions allow gaining stability, limit the rate of electron-hole recombination, and can produce materials photoactive under the visible wavelengths of the solar spectrum. © 2021 Elsevier Ltd, This work was supported by the Spanish Ministry of Economy through the project RTI2018-094958-B-I00 MCIU/AEI/FEDER. LV thanks the Spanish Ministry of Education for the FPU Grant FPU17/03096, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Strong effect of light scattering by distribution of TiO2 particle aggregates on photocatalytic efficiency in aqueous suspensions

  • Tolosana-Moranchel, Álvaro
  • Pecharromán, Carlos
  • Faraldos, Marisol
  • Bahamonde, A.
This work examines the important role of light power absorbed by TiO<inf>2</inf> on the photocatalytic degradation of dichloroacetic acid (DCA) in a semi-continuous slurry photoreactor with UV–Vis radiation. This system is an excellent model for understanding the light matter interaction, because DCA is transparent and the acid pH of the solution prevents the formation of large TiO<inf>2</inf> aggregates. Under these conditions, the light power absorbed by four different commercial Titania photocatalysts, along the whole volume of the reactor, has been quantitatively calculated by assuming a Mie scattering model on a distribution of different particle sizes. Although the different chemical nature of the four considered samples (three of them provided by the Evonik Company, P25, P25/20 and P90, together with Hombikat UV 100), and the different catalytic efficiency based on weight, we have found that all the catalytic responses are fundamentally controlled by the absorbed radiation in the four samples. Therefore, in the studied samples, any difference in the catalytic behavior is only due to the light-matter interaction being of lesser importance other mechanisms, as space-charge blocking., This work has been supported by the Spanish Plan Nacional de I+D +i through the projects RTC-2015-3529-5 and RTI2018-094958-B-I00 (MCIU/AEI/FEDER, UE). Alvaro Tolosana-Moranchel is grateful to “Ministerio de Educacion, Cultura y Deporte”, for his FPU grant (FPU14/ 01605)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Impact of water matrix and oxidant agent on the solar assisted photodegradation of a complex mix of pesticides over titania-reduced graphene oxide nanocomposites

  • Luna-Sanguino, Gema
  • Ruíz-Delgado, A.
  • Duran-Valle, C. J.
  • Malato, S.
  • Faraldos, Marisol
  • Bahamonde, A.
New titania-reduced graphene oxide (TiO2-rGO) nanocomposites have been studied to assess their application in the solar assisted photodegradation of a complex mixing of pesticides (pyrimethanil, isoproturon, alachlor and methomyl) at solar pilot plant, opening the opportunity to extend the use of these hybrid photocatalysts to complex wastewater effluents. TiO2-rGO nanocomposites were prepared by hydrothermal method from two commercial TiO2, Hombikat UV-100 (HBK) and Aeroxide® P25 (P25). The effect of two different water matrices (simulated and natural) on TiO2-rGO solar photoefficiency with two pesticides concentrations (5 mg·L−1 and 200 μg·L−1), and the additional use of an electron scavenging as oxidant agent, such as hydrogen peroxide in a comparison with oxygen from air, has been studied in compound parabolic collectors (CPC) photoreactors. Best photocatalytic performances were always found with oxygen over both TiO2-rGO nanocomposites, regardless of the water matrix employed. The use of H2O2 as oxidant agent has not improved the final photocatalytic efficiency in any case. The generation of secondary highly reactive species in the reaction media from reaction of SO4●- /HOradical dot radicals, and the more negatively surface charge with low SBET of P25-rGO nanocomposite, besides its lower hydrodynamic size with lower particle aggregation in the reaction conditions, have been responsible to promote the photo-oxidation of the complex pesticides mix studied. Finally, HBK TiO2-reduced graphene oxide (HBK-rGO) nanocomposite has presented excellent solar photoefficiency in the photodegradation of 200 μg·L−1 of each pesticide with the oxygen form air, especially under natural water matrix, because of its large negatively charge surface area where probably recombination of electrons and holes is prevented., The Spanish Plan Nacional de I + D + I have supported this work through the projects RTI2018-094958-B-I00 (MCIU/AEI/FEDER, UE), ACCESO PSA, and GR18035 (Junta Extremadura/FEDER). Gema Luna- Sanguino thanks the Spanish “Ministerio de Economia, Industria and Competitividad” for funding their predoctoral contracts BES-2016- 077191., Supplementary material related to this article can be found, in the online version, at doi:https://doi.org/10.1016/j.cattod.2021.03.022, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Photocatalytic Degradation of Alachlor over Titania-Reduced Graphene Oxide Nanocomposite: Intrinsic Kinetic Model and Reaction Pathways

  • Villajos, Beatriz
  • Tolosana-Moranchel, Álvaro
  • Canle, Moisés
  • Farina, Andrea
  • Gascó, Antonio
  • Mesa Medina, Sara
  • Faraldos, Marisol
  • Hermosilla, Daphne
  • Bahamonde, A.
An intrinsic kinetic model based on a proposed reaction photomechanism explicitly dependent on the volumetric rate of photon absorption (VRPA) has been performed and analyzed for the photocatalytic degradation of alachlor in water. A titania-reduced graphene oxide nanocomposite (HBK TiO<inf>2</inf>–rGO) was used as the photocatalyst. The proposed degradation pathway was elucidated addressing H<sup>* –</sup> abstraction, HO* substitution, C–C scission, C–N bond scission, and dealkylation reactions. A suitable kinetic model has successfully been validated by fitting the obtained experimental data to reproduce the evolution of alachlor photodegradation at different HBK-rGO loadings. After simplification, the proposed kinetics were adjusted to a reasoned simplified model of 1–2 parameters, showing very good fitting between predicted and experimental values, as denoted by the resulting lower root-square-mean errors. Finally, the synthesized nanocomposite addressed very good stability and durability applied to the degradation of alachlor by photo-oxidation along six consecutive cycles of reuse., The Spanish “State Research Agency” (AEI) of the “Ministry of Science and Innovation” (MCI) and the “European Regional Development Fund” (ERDF, EU) have supported this work funding, through Project Nos. RTI2018-094958−BI00 (DESTRASOL) and PID2020-114918RB-I00 (PHOTOPREBIO). B.V. thanks the Spanish “Ministry of Science and Innovation” for her AEI contract (No. PRE2019-089049). M.C. acknowledges financial support by “Xunta de Galicia” (Spain, Project No. GPC ED431B 2017/59)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Eco-friendly mechanochemical synthesis of titania-graphene nanocomposites for pesticide photodegradation

  • González, Viviana J.
  • Vázquez, Ester
  • Villajos, Beatriz
  • Tolosana-Moranchel, Álvaro
  • Durán-Valle, Carlos
  • Faraldos, Marisol
  • Bahamonde, A.
Titania graphene hybrid nanocomposites (TiO-FLG) synthesized from graphite and TiO precursors, in a simple and sustainable approach via a three-step method, including the mechanochemical treatment of pre-synthesized FLG and TiO NPs are efficient has led to the preparation of TiO-FLG as efficient nano-catalysts for photocatalytic degradation of a complex mixing of pesticides (isoproturon, pyrimethanil, alachlor and methomyl). The effect of few layer graphene (FLG) loading (0–1.0%) was analyzed to define the optimal ratio of FLG to TiO and compared with the corresponding physical mixtures. X-ray Powder Diffraction (XRD) patterns of all these hybrid photocatalysts have presented the same crystal structure, with anatase as the main crystalline phase and brookite as secondary phase. An interaction between the graphene structure and the TiO nanoparticles has been observed from Energy Dispersive X-Ray (EDX), X-ray photoelectron (XPS) and Raman spectroscopy studies, indicating that FLG is mainly deposited on the surface wrapping the TiO nanoparticles. The presence of FLG in low concentrations and the mechanochemical activation are the key steps to improve the photocatalytic activity of TiO nanoparticles on these hybrid nanocomposites. The TiO-FLG-0.5% hybrid nanocomposite, with circa 1.9 % content of graphitic carbon in surface, has showed the best photocatalytic performance in the degradation of pesticides. Pesticides were completely removed at 350 min, and around 82 % of total organic carbon (TOC) conversion was achieved at 540 min of irradiation time., Graphene Flagship core 3 (881603), CTQ2017-88158-R, CTQ2015- 71238-R, RTI2018-094958-B-I00, SBPL4/ 17/180501/000204, GRU18035, PRE2019-089049, FEDER-JCCM funding, UNCM13-1E- 1663