Pasar al contenido principal

REVESTIMIENTOS MIMETICOS SIN BISFENOL A A BASE DE RESIDUOS DE TOMATE PARA EL ENVASADO DE ALIMENTOS

RTI2018-096896-J-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE MALAGA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Zinc Polyaleuritate Ionomer Coatings as a Sustainable, Alternative Technology for Bisphenol A-Free Metal Packaging

  • Morselli, Davide
  • Cataldi, Pietro
  • Chandra Paul, Uttam
  • Ceseracciu, Luca
  • Benítez, José J.
  • Scarpellini, Alice
  • Guzmán-Puyol, Susana
  • Heredia, Antonio
  • Velentini, Paola
  • Pompa, Pier Paolo
  • Marrero-López, David
  • Athanassiou, Athanassia
  • Heredia-Guerrero, José A.
Sustainable coatings for metal food packaging were prepared from ZnO nanoparticles (obtained by the thermal decomposition of zinc acetate) and a naturally occurring polyhydroxylated fatty acid named aleuritic (or 9,10,16-trihydroxyhexadecanoic) acid. Both components reacted, originating under specific conditions zinc polyaleuritate ionomers. The polymerization of aleuritic acid into polyaleuritate by a solvent-free, melt polycondensation reaction was investigated at different times (15, 30, 45, and 60 min), temperatures (140, 160, 180, and 200 °C), and proportions of zinc oxide and aleuritic acid (0:100, 5:95, 10:90, and 50:50, w/w). Kinetic rate constants calculated by infrared spectroscopy decreased with the amount of Zn due to the consumption of reactive carboxyl groups, while the activation energy of the polymerization decreased as a consequence of the catalyst effect of the metal. The adhesion and hardness of coatings were determined from scratch tests, obtaining values similar to robust polymers with high adherence. Water contact angles were typical of hydrophobic materials with values ≥94°. Both mechanical properties and wettability were better than those of bisphenol A (BPA)-based resins and most likely are related to the low migration values determined using a hydrophilic food simulant. The presence of zinc provided a certain degree of antibacterial properties. The performance of the coatings against corrosion was studied by electrochemical impedance spectroscopy at different immersion times in an aqueous solution of NaCl. Considering the features of these biobased lacquers, they can be potential materials for bisphenol A-free metal packaging, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bio-based lacquers from industrially processed tomato pomace for sustainable metal food packaging

  • Benítez, José J.
  • Ramírez-Pozo, María C.
  • Durán-Barrantes, María M.
  • Heredia, Antonio
  • Tedeschi, Giacomo
  • Ceseracciu, Luca
  • Guzmán-Puyol, Susana
  • Marrero-López, David
  • Becci, Alessandro
  • Amato, Alessia
  • Heredia-Guerrero, José A.
Bio-based lacquers prepared from an underutilized tomato processing residue such as pomace have been investigated as sustainable alternatives to bisphenol A (BPA)-based coatings for metal food packaging. The fabrication methodology consisted of a two-step process: spray-coating of a paste of the lipid fraction of tomato pomace with a mixture ethanol:H2O (3:1, v:v) on common metal substrates, used for food canning, such as aluminum (Al), chromium-coated tin-free steel (TFS), and electrochemically tin-plated steel (ETP), followed by the self melt-polycondensation of such lipid fraction. The polymerization reaction was conducted at 200 °C for different times (10, 20, 30, 40, 50, and 60 min) and was monitored by specular infrared spectroscopy, resulting in maximum degrees of esterification of ∼92% for Al and ∼85% for TFS and ETP substrates. The anticorrosion performance of the coatings was studied by electrochemical impedance spectroscopy at different immersion times (time intervals of 2–5 h during an overall stability test up to 170 h) in an aqueous solution of 1 wt% NaCl. The degree of polymerization and the physical properties of the coatings showed a strong dependence on the metal substrate used. In general, the best results were found for tomato pomace-based lacquers applied on aluminum, achieving higher mechanical strength (critical load of 1739 ± 198 mN for Al, 1078 ± 31 mN for ETP, and 852 ± 206 mN for TFS), hydrophobicity (water contact angle ∼95° for Al, ∼91° for ETP, and ∼88° for TFS), and improved anticorrosion performance (coating resistance of 0.7 MΩcm2 after 170 h of immersion for Al, 0.7 MΩcm2 after 70 h of immersion for TFS, and negligible coating resistance for ETP). In view of the technical innovation proposed in the present paper, the estimation of the environmental sustainability of the process has been considered relevant to fit the circular economy target. For this purpose, a life cycle analysis (LCA) was applied to the overall process, revealing multiple advantages for both the environment and human health., J.A.H.-G. acknowledges the support by the Spanish “Ministerio de Ciencia, Innovación y Universidades” projects RTI2018-096896-J-I00/AEI/10.13039/501100011033 (cofinanced by the European Regional Development Fund, ERDF) and RYC2018-025079-I/AEI/10.13039/501100011033 (cofinanced by the European Social Fund, ESF) as well as by the PIE project 202040E003 funded by CSIC. S.G-P thanks the “Consejería de Transformación Económica, Industria, Conocimiento y Universidades” from Junta de Andalucía for a postdoctoral contract (POSTDOC_21_00008). This works has been also supported by the project UMA20-FEDERJA-067 from “Consejería de Economía y Conocimiento”, “Junta de Andalucía”, Spain, and the European funds for the Regional development FEASR-PSR MARCHE 2014–2020 within the project GRASCIARI RIUNITI., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Waterproof-breathable films from multi-branched fluorinated cellulose esters

  • Tedeschi, Giacomo
  • Guzmán-Puyol, Susana
  • Ceseracciu, Luca
  • Benítez, José J.
  • Goldoni, Luca
  • Koschella, Andreas
  • Heinze, Thomas
  • Cavallo, Gabriella
  • Dichiarante, Valentina
  • Terraneo, Giancarlo
  • Athanassiou, Athanassia
  • Metrangolo, Pierangelo
  • Heredia-Guerrero, José A.
Cellulose ester films were prepared by esterification of cellulose with a multibranched fluorinated carboxylic acid, "BRFA" (BRanched Fluorinated Acid), at different anhydroglucose unit:BRFA molar ratios (i.e., 1:0, 10:1, 5:1, and 1:1). Morphological and optical analyses showed that cellulose-BRFA materials at molar ratios 10:1 and 5:1 formed flat and transparent films, while the one at 1:1 M ratio formed rough and translucent films. Degrees of substitution (DS) of 0.06, 0.09, and 0.23 were calculated by NMR for the samples at molar ratios 10:1, 5:1, and 1:1, respectively. ATR-FTIR spectroscopy confirmed the esterification. DSC thermograms showed a single glass transition, typical of amorphous polymers, at -11 °C. The presence of BRFA groups shifted the mechanical behavior from rigid to ductile and soft with increasing DS. Wettability was similar to standard fluoropolymers such as PTFE and PVDF. Finally, breathability and water uptake were characterized and found comparable to materials typically used in textiles., Spanish “Ministerio de Ciencia, Innovacion y Universidades” projects RTI2018-096896-J-I00/ AEI/10.13039/501100011033 (cofinanced by the European Regional Development Fund, ERDF) and RYC2018-025079-I/AEI/10.13039/ 501100011033 (cofinanced by the European Social Fund, ESF). P.M., V.D., G.C., and G.T. acknowledges the support by the project NiFTy, PRIN2017, prot. 2017MYBTXC., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Pectin-cellulose nanocrystal biocomposites: Tuning of physical properties and biodegradability

  • González Moreno, Ana
  • Guzmán-Puyol, Susana
  • Domínguez, Eva
  • Benítez, José J.
  • Segado, Patricia
  • Lauciello, Simone
  • Ceseracciu, Luca
  • Porras-Vázquez, José M
  • Leon-Reina, Laura
  • Heredia, Antonio
  • Heredia-Guerrero, José A.
The fabrication of pectin-cellulose nanocrystal (CNC) biocomposites has been systematically investigated by blending both polysaccharides at different relative concentrations. Circular free-standing films with a diameter of 9 cm were prepared by simple solution of these carbohydrates in water followed by drop-casting and solvent evaporation. The addition of pectin allows to finely tune the properties of the biocomposites. Textural characterization by AFM showed fibrous morphology and an increase in fiber diameter with pectin content. XRD analysis demonstrated that pectin incorporation also reduced the degree of crystallinity though no specific interaction between both polysaccharides was detected, by ATR-FTIR spectroscopy. The optical properties of these biocomposites were characterized for the first time and it was found that pectin in the blend reduced the reflectance of visible light and increased UV absorbance. Thermal stability, analyzed by TGA, was improved with the incorporation of pectin. Finally, pec, This work has been partially supported by the Spanish “Ministerio de Ciencia, Innovación y Universidades” projects RTI2018-094277-B/AEI/10.13039/501100011033, RTI2018-096896-J-I00/AEI/10.13039/501100011033 (both projects cofinanced by the European Regional Development Fund, ERDF) and RYC2018-025079-I/AEI/10.13039/501100011033 (cofinanced by the European Social Fund, ESF), Peer reviewed