Pasar al contenido principal

Plant cuticle characterization and its use in the production of multifunctional food packaging materials

RYC2018-025079-I

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprograma Subprograma Estatal de Incorporación
Convocatoria Ramón y Cajal
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Greaseproof, hydrophobic, and biodegradable food packaging bioplastics from C6-fluorinated cellulose esters

  • Guzmán-Puyol, Susana
  • Tedeschi, Giacomo
  • Goldoni, Luca
  • Benítez, José J.
  • Ceseracciu, Luca
  • Koschella, Andreas
  • Heinze, Thomas
  • Athanassiou, Athanassia
  • Heredia-Guerrero, José A.
Tridecafluorononanoic acid (TFNA), a C6-fluorinated carboxylic acid, was esterified with cellulose at different molar ratios (0:1, 1:1, 2:1, and 3:1) in a trifluoroacetic acid (TFA):trifluoroacetic anhydride (TFAA):CHCl3 (2:1:1, v:v:v) solvent mixture. Free-standing films were obtained for all formulations and are presented as alternatives to composites and blends of paper with fluorinated molecules. Mechanical properties were investigated by tensile tests, and a plasticizer effect of fluorinated chains was observed. Interestingly, the wettability of these new cellulose derivatives was similar or even better than other common cellulose derivatives and fluorinated polymers employed in food packaging. Hydrodynamic properties were also improved by addition of TFNA, resulting in materials with water vapor permeability values comparable to other cellulose-based food packaging materials. In addition, films with the higher amounts of TFNA showed the required oil resistance for papers used in food packaging applications, as determined by the Kit Test. Finally, the biodegradation of these C6-fluorinated cellulose esters, assessed by biological oxygen demand (BOD) in seawater, was higher than typical bio-based polymers used in food packaging. The bioplastic synthesized at a molar ratio 1:1 (TFNA:cellulose) showed excellent performances in terms of greaseproof, hydrophobicity, ductility, and biodegradability, representing a sustainable alternative to typical plastics used in food packaging., This work has been partially supported by the Spanish “Ministerio de Ciencia, Innovación y Universidades” project RYC2018-025079-I/AEI/10.13039/501100011033 (cofinanced by the European Social Fund,ESF) and by the Spanish Research Council (CSIC) project 202040E003., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Transparency of polymeric food packaging materials

  • Guzmán-Puyol, Susana
  • Benítez, José J.
  • Heredia-Guerrero, José A.
Transparency is a very important technical parameter to evaluate and validate certain food packaging materials. In the recent scientific literature, several methods (i.e. transmittance, opacity, haze, and absorbance) have been used and such variety hinders a direct comparison of results from different authors. In this Review, we describe and discuss the most widely employed methods to measure transparency, with special emphasis on two main parameters: transmittance and opacity. Moreover, a comparison of the different techniques is addressed and the typical values of transmittance and opacity of common transparent food packaging materials are provided. Our current opinion is that transparency should be expressed as transmittance in the visible range due to both the quickness and easiness of the measurement and the standardization of data. This information should be accompanied by the thickness value and a graphical image of the analysed samples for a useful and complete characterization., This work has been partially supported by the Spanish “Ministerio de Ciencia, Innovación y Universidades” project RYC2018-025079-I/AEI/10.13039/501100011033 (cofinanced by the European Social Fund, ESF) and by the Spanish Research Council (CSIC) project 202040E003. S.G-P thanks the “Consejería de Transformación Económica, Industria, Conocimiento y Universidades” from Junta de Andalucía for a postdoctoral contract (POSTDOC_21_00008)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Transparent, UV-blocking, and high barrier cellulose-based bioplastics with naringin as active food packaging materials

  • Guzmán-Puyol, Susana
  • Hierrezuelo, Jesús
  • Benítez, José J.
  • Tedeschi, G.
  • Porras-Vázquez, José M.
  • Heredia, Antonio
  • Athanassiou, A.
  • Romero, Diego
  • Heredia-Guerrero, José A.
Free-standing, robust, and transparent bioplastics were obtained by blending cellulose and naringin at different proportions. Optical, thermal, mechanical, antioxidant, and antimicrobial properties were systematically investigated. In general, the incorporation of naringin produced important UV blocking and plasticizer effects and good antioxidant and antibacterial properties. Moreover, the barrier properties were characterized by determination of their water and oxygen transmission rates, finding that both parameters decreased by increasing the naringin content and reaching values similar to other petroleum-based plastics and cellulose derivatives used for food packaging applications. Finally, the biodegradability of these films was determined by measurement of the biological oxygen demand (BOD) in seawater, demonstrating an excellent decomposition in such conditions., This work has been partially supported by the Spanish “Ministerio de Ciencia, Innovación y Universidades” project RYC2018-025079-I/AEI/10.13039/501100011033 (cofinanced by the European Social Fund, ESF) and by the Spanish Research Council (CSIC) project 202040E003. S.G-P thanks the “Consejería de Transformación Económica, Industria, Conocimiento y Universidades” from Junta de Andalucía for a postdoctoral contract (POSTDOC_21_00008)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Waterproof-breathable films from multi-branched fluorinated cellulose esters

  • Tedeschi, Giacomo
  • Guzmán-Puyol, Susana
  • Ceseracciu, Luca
  • Benítez, José J.
  • Goldoni, Luca
  • Koschella, Andreas
  • Heinze, Thomas
  • Cavallo, Gabriella
  • Dichiarante, Valentina
  • Terraneo, Giancarlo
  • Athanassiou, Athanassia
  • Metrangolo, Pierangelo
  • Heredia-Guerrero, José A.
Cellulose ester films were prepared by esterification of cellulose with a multibranched fluorinated carboxylic acid, "BRFA" (BRanched Fluorinated Acid), at different anhydroglucose unit:BRFA molar ratios (i.e., 1:0, 10:1, 5:1, and 1:1). Morphological and optical analyses showed that cellulose-BRFA materials at molar ratios 10:1 and 5:1 formed flat and transparent films, while the one at 1:1 M ratio formed rough and translucent films. Degrees of substitution (DS) of 0.06, 0.09, and 0.23 were calculated by NMR for the samples at molar ratios 10:1, 5:1, and 1:1, respectively. ATR-FTIR spectroscopy confirmed the esterification. DSC thermograms showed a single glass transition, typical of amorphous polymers, at -11 °C. The presence of BRFA groups shifted the mechanical behavior from rigid to ductile and soft with increasing DS. Wettability was similar to standard fluoropolymers such as PTFE and PVDF. Finally, breathability and water uptake were characterized and found comparable to materials typically used in textiles., Spanish “Ministerio de Ciencia, Innovacion y Universidades” projects RTI2018-096896-J-I00/ AEI/10.13039/501100011033 (cofinanced by the European Regional Development Fund, ERDF) and RYC2018-025079-I/AEI/10.13039/ 501100011033 (cofinanced by the European Social Fund, ESF). P.M., V.D., G.C., and G.T. acknowledges the support by the project NiFTy, PRIN2017, prot. 2017MYBTXC., Peer reviewed