Pasar al contenido principal

PIEZAS Y RECUBRIMIENTOS CERAMICOS AVANZADOS DE ELEVADAS PRESTACIONES TERMICAS Y MECANICAS A PARTIR DE DISOLUCIONES Y SUSPENSIONES PRECURSORAS

RTI2018-099033-B-C31

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT JAUME I DE CASTELLO

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Engineering zirconia coating microstructures by using saccharides in aqueous suspension plasma spraying feedstocks

  • Carnicer, V.
  • Orts, M.J.
  • Moreno, Rodrigo
  • Sánchez, E.
This study aims to demonstrate the feasibility to develop columnar microstructures in zirconia coatings manufactured by suspension plasma spray, through the modification of the properties of the suspension feedstocks with different common monosaccharides: fructose, ribose and glucosamine. The research also pretends to relate the properties of the suspensions to the final coatings. For the study, the saccharides suspensions were characterised in terms of physical and rheological properties. Then, highly concentrated suspensions containing the saccharides were plasma sprayed under the same spraying conditions. The experimental study with optic and scanning electron microscopy was used to evaluate the microstructure of the coatings and their characteristics, while the confocal laser scanning microscope (CLSM) was used to carry out a precise study of the surface topography. Results showed that saccharides produce a strong influence on the proliferation of columnar structures in the coating cross-section visible as cluster (cauliflower-like) structures on the surface. This effect is due to the diminution of water surface tension as well as an extra energy input during combustion of the saccharides. CLSM has allowed a detailed examination of the topography of the coatings to clearly quantify the differences observed in relation to the development of columnar microstructure., All the authors would like to thank the support received by theSpanish Ministry of Science, Innovation and Universities and FEDER Funds, through the research project (ref. RTI2018-099033-B-C31 andC33). V. Carnicer would like to acknowledge to the Research Promotion Plan of the University Jaume I for the predoctoral fellowship (ref.PREDOC/2017/51). Moreover, all authors would also like to thank Dr.Paulina Wiecinska for her helpful discussions and approach to thesaccharides.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

ZrSiO4/ZrO2 thermal barrier coatings produced by suspension plasma spraying

  • Rosado, Eduardo
  • Cañas, E.
  • Recio, Paloma
  • Sánchez, E.
  • Moreno, Rodrigo
[EN] Zircon has excellent thermal properties that make it a good candidate for thermal barrier coatings. Although it suffers decomposition at high temperature, significant amounts of zircon phase can be retained in the coatings obtained by suspension plasma spraying. The aim of the present work is to evaluate the partial substitution of zirconia, commonly used for TBCs, by zircon, cheaper and more available. Zircon/zirconia aqueous suspensions with different ratios were prepared and sprayed by suspension plasma spraying. The obtained coatings has lamellar and columnar microstructures depending on the zircon/zirconia ratio. Up to 20 wt% of the starting ZrSiO4 content is retained for high zircon content feedstocks. A tetragonal zirconia matrix resulting from the decomposition of zircon is obtained as a result of the small crystallite size obtained for this phase (<30 nm). This opens the possibility of partially replacing zirconia by zircon to obtain new TBCs at lower cost., This research was funded by the Spanish Ministry of Science and Innovation (MCI), the State Research Agency (AEI) and the European Regional Development Fund (FEDER) under projects RTI2018-099033-B-C31/C33, PID2021-124521OB-I00 and pre-doctoral fellowship PRE2019-091092., Peer reviewed