Pasar al contenido principal

PIEZAS Y RECUBRIMIENTOS CERAMICOS AVANZADOS DE ELEVADAS PRESTACIONES TERMICAS Y MECANICAS A PARTIR DE DISOLUCIONES Y SUSPENSIONES PRECURSORAS

RTI2018-099033-B-C33

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Microwave sintering study of strontium-doped lanthanum manganite in a single-mode microwave with electric and magnetic field at 2.45 GHz

  • Moratal, Sheila
  • Moreno, Rodrigo
  • Benavente Martínez, Rut|||0000-0002-4566-9475
  • Salvador Moya, Mª Dolores|||0000-0002-4242-478X
  • Penaranda-Foix, Felipe L.|||0000-0003-4012-0763
  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
[EN] The objective of this work is to study the changes in the physical and mechanical properties of strontium-doped lanthanum manganite (LSM) material and LSM-YSZ (ZrO2 doped with 8 mol% yttria) composite, obtained by colloidal processing and sintered by 2.45 GHz microwave sintering at 1200 and 1300 ¿C using two different single-mode cavities. One circular cavity with TE111 mode that has maximum in the electric field (E-field) and one rectangular cavity with TE102 mode that has maximum in the magnetic field (H-field). As compared to conventional sintering at 1300 and 1400 ¿C, the microwave-heated samples exhibited a denser structure for shorter sintering times. LSM-based materials showed higher heating behavior in H-field, which translates into higher energy absorption. This fact can be attributed to an electromagnetic pressure induced by the combined effect of current loops subjected to H-field. Therefore, the interaction between the material and the electromagnetic waves depends on the dominant field of them., This research was funded by the project of the Spanish Ministry of Science and Innovation: RTI2018-099033-B-C32&C33 and RYC2016-20915, and Generalitat Valenciana (BEST/2021/084, BEST/2021/082).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Tribological behavior of TZ4YS-MoSi2 composites obtained by Spark Plasma Sintering

  • Benavente Martínez, Rut|||0000-0002-4566-9475
  • Salvador Moya, Mª Dolores|||0000-0002-4242-478X
  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
  • Bloem, Carlos
  • Gutiérrez-González, Carlos F.
  • Alcázar, Carmen
  • Moreno, Rodrigo
[EN] The aim of this work was to evaluate the role of MoSi2 content (5, 10, 15 wt%) in the mechanical and tribological behavior of TZ4YS-MoSi2 composites obtained by colloidal processing and spark plasma sintering (SPS) at 1500 degrees C. Firstly, the densification of TZ4YS-MoSi2 composite and the shrinkage-rate curves by SPS applying 80 MPa from 1300 degrees C to 1500 degrees C is studied. The hardness and fracture toughness values confirmed that up to 99.9% densification is gradually reached with increasing MoSi2 percentage. Secondly, pin-on-disk tribological tests at different distances (1, 5, 15 and 2000 m) with Al2O3 as counterpart were performed to record the behavior of the materials in the initial and final stages of wear. The MoSi2 content was associated to the beginning of the transition from mild to severe wear, higher the amount of MoSi2 faster is the transition. This behavior was correlated with MoSi2 content, which aids the formation of a tribolayer., The authors would like to thank the Ministry of Science, Innovation and Universities (Spain) for its financial through the projects RTI2018-099033-B-C32&C33 (MCIU/AEI/FEDER, UE) and RYC-2016-20915.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dielectric, mechanical and thermal properties of ZrO2¿TiO2 materials obtained by microwave sintering at low temperature

  • Guillén, René M.
  • Recio, Paloma
  • Moreno, Rodrigo
  • Benavente Martínez, Rut|||0000-0002-4566-9475
  • Salvador Moya, Mª Dolores|||0000-0002-4242-478X
  • Penaranda-Foix, Felipe L.|||0000-0003-4012-0763
  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
[EN] The sinterability of 3Y-TZP/TiO2 materials using micrometre-sized ZrO2 and nanometre-sized TiO (16 wt%) by one-step fast microwave sintering at low temperature (1200¿1300C) was investigated. Firstly, in situ detailed analysis of the dielectric properties of the material with temperature was carried out in order to measure the capacity of the material to transform microwave energy into heat. Another related parameter associated to microwave sintering is the penetration depth of the microwave radiation into the material, which showed great homogeneity from 400¿C. Secondly, the effect of sintering conditions on microstructure, density, hardness and coefficient of thermal expansion was evaluated. The X-ray diffraction study and microstructural characterization demonstrate that it is possible to obtain fully dense pieces (>99%) by microwave sintering, a condition yielding to a coarse-grained (~1¿2 ¿m), quite hard (~13.7 GPa) 3Y-TZP/TiO material. However, the most important feature is the significant reduction of the thermal expansion coefficient as compared to that of 3Y- TZP. In addition, the results from conventional sintering at 1400¿1500 C with 2 and 6 h of dwell time are examined and compared. The materials obtained at 1500¿C showed high density with grain size and hardness similar to those obtained by microwave but with a dramatic difference in the power consumption of the sintering cycle, since the materials obtained by microwave used a maximum absorbed power of 120 W and a heating cycle of only 40 min., The authors are grateful to the Generalitat Valenciana for the fund-ing support for the Santiago Grisolia program (GRISOLIAP/2018/168) and to the Ministry of Science, Innovation and Universities (Spain) through the projects RTI2018-099033-B-C32 and C33 (MCIU/AEI/FEDER, UE) and RYC-2016-20915.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Better ceramics through colloid chemistry

  • Moreno, Rodrigo
[EN] In this work, the key role of colloid chemistry in the development of novel processing routes for ceramic manufacture is reported. An overview of the origins of a ceramic processing science is presented, emphasizing the pioneering works and the scientific fundaments of all processing steps that make use of suspensions. A brief review of the importance of colloid chemistry in the synthesis of nanoparticles with controlled purity, size and shape is given, followed by a description of the suspension properties and their effect in the beneficiation and shaping of ceramics. The main shaping techniques for the production of bulk parts, substrates and coatings and layered ceramics are shown, as well as the multiple possibilities for the design of composites with tailored microstructures and microarchitectures., This work has been supported by the Spanish Ministry of Economy, Industry and Competitiveness and FEDER Funds under Grants MAT2015-67586-C3-2-R (MINECO/FEDER, UE) and RTI2018-099033-B-C33 (MCIU/AEI/FEDER, UE). The author greatly acknowledges the JECS Trust Board members for the concession of the JECS Trust Award 2017.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Engineering zirconia coating microstructures by using saccharides in aqueous suspension plasma spraying feedstocks

  • Carnicer, V.
  • Orts, M.J.
  • Moreno, Rodrigo
  • Sánchez, E.
This study aims to demonstrate the feasibility to develop columnar microstructures in zirconia coatings manufactured by suspension plasma spray, through the modification of the properties of the suspension feedstocks with different common monosaccharides: fructose, ribose and glucosamine. The research also pretends to relate the properties of the suspensions to the final coatings. For the study, the saccharides suspensions were characterised in terms of physical and rheological properties. Then, highly concentrated suspensions containing the saccharides were plasma sprayed under the same spraying conditions. The experimental study with optic and scanning electron microscopy was used to evaluate the microstructure of the coatings and their characteristics, while the confocal laser scanning microscope (CLSM) was used to carry out a precise study of the surface topography. Results showed that saccharides produce a strong influence on the proliferation of columnar structures in the coating cross-section visible as cluster (cauliflower-like) structures on the surface. This effect is due to the diminution of water surface tension as well as an extra energy input during combustion of the saccharides. CLSM has allowed a detailed examination of the topography of the coatings to clearly quantify the differences observed in relation to the development of columnar microstructure., All the authors would like to thank the support received by theSpanish Ministry of Science, Innovation and Universities and FEDER Funds, through the research project (ref. RTI2018-099033-B-C31 andC33). V. Carnicer would like to acknowledge to the Research Promotion Plan of the University Jaume I for the predoctoral fellowship (ref.PREDOC/2017/51). Moreover, all authors would also like to thank Dr.Paulina Wiecinska for her helpful discussions and approach to thesaccharides.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

ZrSiO4/ZrO2 thermal barrier coatings produced by suspension plasma spraying

  • Rosado, Eduardo
  • Cañas, E.
  • Recio, Paloma
  • Sánchez, E.
  • Moreno, Rodrigo
[EN] Zircon has excellent thermal properties that make it a good candidate for thermal barrier coatings. Although it suffers decomposition at high temperature, significant amounts of zircon phase can be retained in the coatings obtained by suspension plasma spraying. The aim of the present work is to evaluate the partial substitution of zirconia, commonly used for TBCs, by zircon, cheaper and more available. Zircon/zirconia aqueous suspensions with different ratios were prepared and sprayed by suspension plasma spraying. The obtained coatings has lamellar and columnar microstructures depending on the zircon/zirconia ratio. Up to 20 wt% of the starting ZrSiO4 content is retained for high zircon content feedstocks. A tetragonal zirconia matrix resulting from the decomposition of zircon is obtained as a result of the small crystallite size obtained for this phase (<30 nm). This opens the possibility of partially replacing zirconia by zircon to obtain new TBCs at lower cost., This research was funded by the Spanish Ministry of Science and Innovation (MCI), the State Research Agency (AEI) and the European Regional Development Fund (FEDER) under projects RTI2018-099033-B-C31/C33, PID2021-124521OB-I00 and pre-doctoral fellowship PRE2019-091092., Peer reviewed