Pasar al contenido principal

PIEZAS Y RECUBRIMIENTOS CERAMICOS AVANZADOS DE ELEVADAS PRESTACIONES TERMICAS Y MECANICAS A PARTIR DE DISOLUCIONES Y SUSPENSIONES PRECURSORAS

RTI2018-099033-B-C32

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Microwave sintering study of strontium-doped lanthanum manganite in a single-mode microwave with electric and magnetic field at 2.45 GHz

  • Moratal, Sheila
  • Moreno, Rodrigo
  • Benavente Martínez, Rut|||0000-0002-4566-9475
  • Salvador Moya, Mª Dolores|||0000-0002-4242-478X
  • Penaranda-Foix, Felipe L.|||0000-0003-4012-0763
  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
[EN] The objective of this work is to study the changes in the physical and mechanical properties of strontium-doped lanthanum manganite (LSM) material and LSM-YSZ (ZrO2 doped with 8 mol% yttria) composite, obtained by colloidal processing and sintered by 2.45 GHz microwave sintering at 1200 and 1300 ¿C using two different single-mode cavities. One circular cavity with TE111 mode that has maximum in the electric field (E-field) and one rectangular cavity with TE102 mode that has maximum in the magnetic field (H-field). As compared to conventional sintering at 1300 and 1400 ¿C, the microwave-heated samples exhibited a denser structure for shorter sintering times. LSM-based materials showed higher heating behavior in H-field, which translates into higher energy absorption. This fact can be attributed to an electromagnetic pressure induced by the combined effect of current loops subjected to H-field. Therefore, the interaction between the material and the electromagnetic waves depends on the dominant field of them., This research was funded by the project of the Spanish Ministry of Science and Innovation: RTI2018-099033-B-C32&C33 and RYC2016-20915, and Generalitat Valenciana (BEST/2021/084, BEST/2021/082).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fabrication and characterization of Nb2O5-doped 3Y-TZP materials sintered by microwave technology

  • Guillén-Pineda, René M.
  • Gutiérrez-González, Carlos F.
  • Salvador Moya, Mª Dolores|||0000-0002-4242-478X
  • Catalá Civera, José Manuel|||0000-0002-0617-1762
  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
[EN] The purpose of this research is focused on the manufacture and characterization of a partially stabilized zirconia ceramic with 3 mol% of Yttria and doped with .5 and 1.5 mol% of Nb2O5 to analyze the influence of doping, with the purpose of improving the properties before hydrothermal degradation. In the first instance, the microwave sintering process was used for the consolidation of this material, then the physical and mechanical properties were characterized. Together, the results obtained by the conventional sintering process were compared. A low hydrothermal degradation study (LTD) is presented at low temperatures in which possible changes in the mechanical properties of the ceramic materials are analyzed and its influence on the phase transformation that zirconia may present is observed. The mechanical properties were evaluated through hardness, fracture toughness, and Young's modulus tests. Likewise, their density was analyzed, and microstructure was characterized by FESEM. It was found that the microwave-sintered samples at 1200 degrees C exhibited superior properties of toughness than even samples sintered by conventional methods at higher temperatures (1400 degrees C). The sample of 3Y-TZP with 1.5 mol% Nb2O5 sintered by microwave with <.2% of porosity achieved a maximum fracture toughness value around 40% higher than the dense monolithic 3Y-TZP material., Santiago Grisolia program, Grant/Award Number: GRISOLIAP/2018/168; Ministry of Science, Innovation and Universities (Spain), Grant/Award Numbers: RTI2018-099033-B-C32, RYC-2016-20915
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Tribological behavior of TZ4YS-MoSi2 composites obtained by Spark Plasma Sintering

  • Benavente Martínez, Rut|||0000-0002-4566-9475
  • Salvador Moya, Mª Dolores|||0000-0002-4242-478X
  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
  • Bloem, Carlos
  • Gutiérrez-González, Carlos F.
  • Alcázar, Carmen
  • Moreno, Rodrigo
[EN] The aim of this work was to evaluate the role of MoSi2 content (5, 10, 15 wt%) in the mechanical and tribological behavior of TZ4YS-MoSi2 composites obtained by colloidal processing and spark plasma sintering (SPS) at 1500 degrees C. Firstly, the densification of TZ4YS-MoSi2 composite and the shrinkage-rate curves by SPS applying 80 MPa from 1300 degrees C to 1500 degrees C is studied. The hardness and fracture toughness values confirmed that up to 99.9% densification is gradually reached with increasing MoSi2 percentage. Secondly, pin-on-disk tribological tests at different distances (1, 5, 15 and 2000 m) with Al2O3 as counterpart were performed to record the behavior of the materials in the initial and final stages of wear. The MoSi2 content was associated to the beginning of the transition from mild to severe wear, higher the amount of MoSi2 faster is the transition. This behavior was correlated with MoSi2 content, which aids the formation of a tribolayer., The authors would like to thank the Ministry of Science, Innovation and Universities (Spain) for its financial through the projects RTI2018-099033-B-C32&C33 (MCIU/AEI/FEDER, UE) and RYC-2016-20915.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Microstructure and mechanical properties of 4YTZP-SiC composites obtained through colloidal processing and Spark Plasma Sintering

  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
  • Salvador Moya, Mª Dolores|||0000-0002-4242-478X
  • Navarro, Lucia
  • Gutiérrez-González, Carlos F.
  • Alcazar, Carmen
  • Moreno, Rodrigo
[ES] En este estudio se investigaron las propiedades microestructurales y mecánicas de los composites de circona reforzados con carburo de silicio (SiC) obtenidos mediante procesamiento coloidal y sinterización por descarga eléctrica (spark plasma sintering [SPS]). Se prepararon mezclas de circona dopada con 4 %mol de itria (4YTZP) y SiC con porcentajes del 15 y 20% en peso mediante procesamiento coloidal y liofilización para garantizar la homogeneidad de los polvos, posteriormente se sinterizaron por SPS a temperaturas de 1300 a 1400 °C para obtener composites densos. La técnica de SPS permite controlar el tiempo y la velocidad de sinterización e impide la oxidación del SiC para garantizar una mayor reproducibilidad. La microestructura de los composites ha revelado algunos defectos durante la sinterización debido a las diferencias de coeficiente de expansión térmica entre la 4YTZP y el SiC. Por otro lado, se estudiaron las propiedades mecánicas como la dureza Vickers, el módulo de Young y la resistencia a la flexión. En comparación con el material monolítico de 4YTZP sinterizado a 1400 °C, los composites presentan mejores valores de resistencia a la fractura (~ 588 MPa y ~ 492 MPa, con un 15 y un 20% en peso de SiC, respectivamente). También se ha demostrado que las partículas de SiC actúan como centro de absorción de propagación de grietas., [EN] Bulk composites of silicon carbide reinforced zirconia were obtained through colloidal processing and spark plasma sintering, and their microstructural and mechanical properties were investigated. Mixtures of powders of 4 mol% yttria-doped zirconia and silicon carbide, with percentages of 15 and 20 wt% of silicon carbide, were prepared by colloidal processing and freeze-drying to guarantee the homogeneity of powders, and sintered by SPS at temperatures ranging from 1300 to 1400 degrees C to obtain dense composites. The spark plasma sintering technique makes it possible to control sintering energy and speed, and impedes the oxidation of silicon carbide to ensure larger reproducibility. The microstructure of the composites reveals that some defects arise during sintering due to the differences of coefficient of thermal expansion between zirconia and silicon carbide. Mechanical properties were studied, such as Vickers hardness, Young's modulus, and bending strength. Compared with 4YTZP monolithic material, composites have better fracture strength values (similar to 588 MPa and 492 MPa, for 15 wt% and 20 wt% of silicon carbide, respectively) when sintered at 1400 degrees C. It is also demonstrated that silicon carbide particles act as an absorption centre for propagating cracks., The authors would like to thank the financial support received of the Spanish Ministry of Economy and Competitiveness (MINECO) under project MAT201567586C3R. A. Borrell acknowledge MINECO for RYC-2016-20915.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dielectric, mechanical and thermal properties of ZrO2¿TiO2 materials obtained by microwave sintering at low temperature

  • Guillén, René M.
  • Recio, Paloma
  • Moreno, Rodrigo
  • Benavente Martínez, Rut|||0000-0002-4566-9475
  • Salvador Moya, Mª Dolores|||0000-0002-4242-478X
  • Penaranda-Foix, Felipe L.|||0000-0003-4012-0763
  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
[EN] The sinterability of 3Y-TZP/TiO2 materials using micrometre-sized ZrO2 and nanometre-sized TiO (16 wt%) by one-step fast microwave sintering at low temperature (1200¿1300C) was investigated. Firstly, in situ detailed analysis of the dielectric properties of the material with temperature was carried out in order to measure the capacity of the material to transform microwave energy into heat. Another related parameter associated to microwave sintering is the penetration depth of the microwave radiation into the material, which showed great homogeneity from 400¿C. Secondly, the effect of sintering conditions on microstructure, density, hardness and coefficient of thermal expansion was evaluated. The X-ray diffraction study and microstructural characterization demonstrate that it is possible to obtain fully dense pieces (>99%) by microwave sintering, a condition yielding to a coarse-grained (~1¿2 ¿m), quite hard (~13.7 GPa) 3Y-TZP/TiO material. However, the most important feature is the significant reduction of the thermal expansion coefficient as compared to that of 3Y- TZP. In addition, the results from conventional sintering at 1400¿1500 C with 2 and 6 h of dwell time are examined and compared. The materials obtained at 1500¿C showed high density with grain size and hardness similar to those obtained by microwave but with a dramatic difference in the power consumption of the sintering cycle, since the materials obtained by microwave used a maximum absorbed power of 120 W and a heating cycle of only 40 min., The authors are grateful to the Generalitat Valenciana for the fund-ing support for the Santiago Grisolia program (GRISOLIAP/2018/168) and to the Ministry of Science, Innovation and Universities (Spain) through the projects RTI2018-099033-B-C32 and C33 (MCIU/AEI/FEDER, UE) and RYC-2016-20915.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of SiC addition on mechanical behavior of thermal barriers with the aid of acoustic emission

  • Busquets Mataix, David Jeronimo|||0000-0001-5031-7805
  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
  • Salvador Moya, Mª Dolores|||0000-0002-4242-478X
  • Bloem, Carlos
[EN] The improvement of high temperature materials with lower heat transfer coefficients lead to the development of thermal barrier coatings (TBCs). One of the most widely used materials for thermal barrier coatings is Y2O3 stabilized ZrO2 (Y-TZP) because of its excellent shock resistance, low thermal conductivity, and relatively high coefficient of thermal expansion. The aim of this work is to study the TBCs mechanical behavior with the addition of SiC into the suspension of Y-TZP/Al2O3 by acoustic emission (AE). Additionally, a microstructural analysis and a finite elements model were carried out in order to compare results. The coatings were made by suspension plasma spray (SPS) on metal plates of 70 x 12 x 2 mm(3). An intermetallic was deposited as a bond coating, followed by a coating of Y-TZP/Al2O3 with and without 15 wt.% SiC, with thicknesses between 87 and 161 mu m. The AE becomes a fundamental tool in the study of the mechanical behavior of thermal barriers. The use of wavelet transforms streamlines the study and analysis of recorded sound spectra. The crack generation arises at very low stress levels., The authors wish to thank the financial contribution of the Ministry of Economy, Industry, and Competitiveness of the Government of Spain, (MINECO), and to the RTI 2018-099033-B-C32-RETOS. A. Borrel acknowledges her contract (RyC-2016-20915).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of Microwave-Assisted Synthesis and Sintering of Lead-Free KNL-NTS Ceramics

  • Lagunas-Chavarría, Anggel
  • Navarro-Rojero, María Guadalupe
  • Salvador Moya, Mª Dolores|||0000-0002-4242-478X
  • Benavente Martínez, Rut|||0000-0002-4566-9475
  • Catalá Civera, José Manuel|||0000-0002-0617-1762
  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
[EN] Lead-free piezoelectric powders (K0.44Na0.52Li0.04)(Nb0.82Ta0.10Sb0.04)O-3 were obtained by conventional and microwave-assisted reactive heating. Firstly, the synthesis of the material was carried out following the mixed oxide route and employing both traditional methods and microwave technology. Thermogravimetry, X-ray diffraction, field emission scanning electron microscopy and electrical properties analyses were evaluated. X-ray diffraction of the powders calcined by the microwave process shows the formation of perovskite structure with orthorhombic geometry, but it is possible to observe the presence of other phases. The presence of the secondary phases found can have a great influence on the heating rate during the synthesis on which the kinetics of the reaction of formation of the piezoelectric compound depend. The calcined powder was sintered at different temperatures by conventional and non-conventional processes. The microstructure of the ceramics sintered by microwave at 1050 degrees C for 10 min shows perovskite cubes with regular geometry, of size close to 2-5 p.m. However, the observed porosity (similar to 8%), the presence of liquid phase and secondary phases in the microstructure of the microwave sintered materials lead to a decrease of the piezoelectric constant. The highest d 33 value of 146 pC/N was obtained for samples obtained by conventional at 1100 degrees C 2 h compared to samples sintered by microwave at 1050 degrees C 10 min (similar to 15 pC/N)., This research was funded by the projects of the Spanish Ministry of Science and Innovation: RTI2018-099033-B-C32 and RYC-2016-20915, and Generalitat Valenciana (BEST/2021/084, BEST/2021/082).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Study of microwave heating effect in the behaviour of graphene as second phase in ceramic composites

  • Benavente Martínez, Rut|||0000-0002-4566-9475
  • Salvador Moya, Mª Dolores|||0000-0002-4242-478X
  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
  • Centeno, Alba
  • Alonso, Beatriz
  • Zurutuza, Amaya
[EN] The choice of the right material is essential in microwave processing. The carbon materials are good microwave absorbers, which allows them to be transformed by microwave heating into new carbon materials with adapted properties, capable of heating other materials indirectly. In this paper, the microwave heating of graphene as reinforcement of the lithium aluminosilicate (LAS) ceramics has been explored. LAS ceramics have a near-zero coefficient of thermal expansion and exhibit an effective and efficient heating by microwave. Nevertheless, we have found that the graphene did not show any significant response to the microwave radiation and, hence, the interaction as mechanical reinforcement with the LAS material is harmful. The possible benefits of graphene materials to microwave technology are widely known; however, the mechanism involved in the interaction of microwave radiation with ceramic-graphene composites with high dielectric loss factors has not been addressed earlier., This research was funded by the project of the Spanish Ministry of Economy and Competitiveness (MINECO): RTI2018-099033-B-C32. A. Borrell acknowledges to MINECO her RyC contract (RYC-2016-20915)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A novel study of the effect of temperature on the crystal structure of lithium aluminosilicate materials

  • Benavente, Rut
  • Salvador, M. D.
  • Fernández, Adolfo
  • Borrell, Amparo
Dense Li2O–Al2O3–SiO2 (LAS) material was obtained in solid state by two sintering methods: conventional and microwave. The cyclical variation in temperature that these materials are subjected to during their useful life could cause changes in their crystalline structure and therefore changing their macroscopic properties. The role played by temperature in the diffraction patterns evolution was investigated through X-Ray thermodiffractometry measurements. Evolution of lattice parameters and crystal structure was determined and correlated with changes in the coefficient of thermal expansion. This work provides a comprehensive view of the thermal history of LAS materials according to the sintering technique used., This research was funded by the project of the Spanish Ministry of Economy and Competitiveness (MINECO): RTI2018-099033-B-C32 and RYC-2016-20915., Peer reviewed