Pasar al contenido principal

VIABILIDAD DEL DESARROLLO DE NUEVOS CEMENTOS CON ADICION DE CALIZA Y ARCILLAS CALCINADAS CON PROPIEDADES REOLOGICAS MEJORADAS

RTI2018-099326-A-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Rheology of Alkali-Activated Mortars: Influence of Particle Size and Nature of Aggregates

  • Gismera Diez, Sara
  • Alonso López, M. del Mar
  • Palacios, Marta
  • Puertas, Francisca
The effect of two precursors (slag and fly ash), different particle size distribution, and three types of aggregate (siliceous sand, limestone, and recycled concrete) on alkali-activated material (AAM) mortar rheology were studied and compared to their effect on an ordinary Portland Cement (OPC) mortar reference. Stress growth and flow curve tests were conducted to determine plastic viscosity and static and dynamic yield stress of the AAM and OPC mortars. In both OPC and AAM mortars, a reduction of the aggregate size induces a rise of the liquid demand to preserve the plastic consistency of the mortar. In general terms, an increase of the particle size of the siliceous aggregates leads to a decrease of the measured rheological parameters. The AAM mortars require higher liquid/solid ratios than OPC mortars to attain plastic consistency. AAM mortars proved to be more sensitive than OPC mortars to changes in aggregate nature. The partial replacement of the siliceous aggregates with up to 20% of recycled concrete aggregates induced no change in mixing liquid uptake, in either AAM or OPC mortars. All the AAM and OPC mortars studied fitted to the Bingham model., This study was funded by AEI-/FEDER/UE under projects BIA2013-47876-C2-1-P and BIA2016-77252-P. Marta Palacios thanks Consejería de Educación e Investigación (Comunidad de Madrid) for funding the 2016-T1/AMB-1434 project in the frame of “Ayudas de Atracción de Talento Investigador” and MCIU/AEI/FEDER, UE for funding the RTI2018-099326-A-I00 project., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Construcción sostenible. El papel de los materiales

  • Puertas, Francisca
  • Alonso López, M. del Mar
  • Palacios, Marta
En este artículo se aborda, de manera resumida, la necesidad de alcanzar una construcción sostenible y el papel que juegan los materiales (cemento y hormigón) para lógralo. Se describen algunas de las investigaciones que se están realizando para la obtención de cementos más eco-eficientes (cementos con bajos contenidos en clínker y cementos alcalinos). Las materias primas de gran parte de estos cementos y hormigones eco-eficientes son residuos o subproductos industriales. Se resalta la necesidad de tener controles químicos, físicos, mineralógicos y radiológicos de estos residuos antes y después de su utilización en la preparación de los materiales de construcción. Se describen brevemente los aspectos (prestacionales y medioambientales) positivos de estos cementos y las líneas de investigación abiertas en torno a la mejora de sus propiedades y comportamiento. Con esa misma finalidad de alcanzar el “Hormigón Verde” se presentan resultados de la reutilización de residuos de construcción y demolición en la producción de hormigón. Se hace también referencia a otros tipos de hormigones de altas prestaciones (resistentes y durables) y propiedades y características especiales (auto-sellantes, auto-limpiables, impresión 3D, etc.)., Las autoras agradecen a la Agencia Estatal de Investigación y al Ministerio de Ciencia e Innovación la subvención del Proyecto BIA2016-77252-P y y RTI2018-099326-A-I00. Así mismo, las autoras agradecen a la Consejería de Educación e Investigación de la Comunidad de Madrid por la concesión de las ayudas de atracción de talento investigador 2016-T1/AMB-1434., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Early reactivity of sodium silicate-activated slag pastes and its impact on rheological properties

  • Palacios, Marta
  • Gismera Diez, Sara
  • Alonso López, M. del Mar
  • d´Espinose Lacaillerie, J.B.
  • Lothenbach, Barbara
  • Favier, Aurelie
  • Brumaud, Coralie
  • Puertas, Francisca
The fast loss of fluidity of sodium silicate-activated slag (SS-AAS) systems have been widely studied in the literature. In this study, the rheology of these cements has been correlated with the evolution of the reaction products formed over time. For this purpose, a combination of experimental characterization techniques, to study the pore solution composition and microstructure of SS-AAS pastes and hermodynamic calculations have been applied. The initial precipitation of ill-defined N-A-S-H and C-N-A-S-H producta leads to a fast increase of the storage modulus after 40 min of reaction. These products are formed from the reaction of the Na+ ions and silicate ions of the activator with the Ca2+ and aluminate species dissolved from the slag. However, when a shear is applied, the structure breaks down and fluidity is recovered, that infers that the attractive forces between the particles are low at the early stages of hydration., The authors thank Prof. Habert (ETHZ) for constructive discussion. Dr. Francesco Caruso (SIK-ISEA) is thanked for helping to develop a protocol for the ICP-OES measurements. Dr. M. Palacios acknowledges Consejería de Educación e Investigación (Comunidad de Madrid) for funding the 2016-T1/AMB-1434 project in the frame of “Ayudas de Atracción de Talento Investigador” and MCIU/AEI/FEDER, UE for funding the RTI2018-099326-A-I00 project. Prof. F. Puertas thanks the Spanish Ministry of Science and Innovation for funding BIA2013-47876-C2-1-P and BIA2016-77252-P projects., Peer reviewed