Pasar al contenido principal

FOCALIZACION Y CONFORMACION DE HACES DE ULTRASONIDOS MEDIANTE LENTES PLANAS

RTI2018-100792-B-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 21
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On the Design of Soret Zone Plates based on Binary Sequences using Directional Transducers

  • Candelas Valiente, Pilar|||0000-0002-9924-7673
  • Fuster Escuder, José Miguel|||0000-0001-7778-8834
  • Pérez-López, Sergio
[EN] In this work, we analyze the effect of the distribution of transparent Fresnel regions over the focusing profile of Soret Zone Plates (SZP) based on binary sequences. It is shown that this effect becomes very significant in those fields where directional transducers are employed, such as microwaves or acoustics. A thorough analysis of both the SZP transmission efficiency and the focusing enhancement factor is presented. Moreover, experimental measurements are also carried out for a particular type of binary sequence, the Cantor ternary set, validating the theoretical model and demonstrating that the distribution of transparent Fresnel regions becomes a critical parameter in applications requiring directional emitters., This work has been supported by Spanish MICINN RTI2018-100792-B-I00 project and Generalitat Valenciana AICO/2020/139 project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Application of Phase-Reversal Fresnel Zone Plates for Improving The Elevation Resolution in Ultrasonic Testing with Phased Arrays

  • Dolmatov, Dmitry O.
  • Filippov, German A.
  • Minin, Igor V.
  • Minin, Oleg V.
  • Sednev, Dmitry A.
  • Tarrazó-Serrano, Daniel|||0000-0001-9986-0884
[EN] Currently, phased arrays have found wide application in ultrasonic nondestructive testing. Volumetric results provided by the inspections with linear phased arrays have low lateral resolution in the elevation direction of such probes. This fact complicates the defects characterization task. In this paper, we suggest the application of the Phase-Reversal Fresnel Zone Plate to increase the resolution of volumetric imaging with linear phased arrays. Application of such plates is aimed at ultrasonic focusing in the elevation plane whereas focusing on the active aperture plane is provided by the application of the Sampling Phased Array. Furthermore, the use of the Phase-Reversal Fresnel Zone Plate is advantageous due to the capability of its 3D printing and introduction to the existing automated testing systems avoiding making changes to the current software and hardware. The effectiveness of the plates was verified experimentally on the existing automated testing system. The obtained experimental results demonstrate that the application of the Phase-Reversal Fresnel Zone Plate allowed achieving the results of the higher resolution as well as improving the signal to noise ratio., This work has been supported by the Spanish MINECO (TEC2015-70939-R) and MICINN (RTI2018-100792-B-I00). The research is funded by the Governmental program "Science", research projects No. 11.3683.2017/4.6 and No. 11.6342.2017/8.9. The research is carried out within the framework of Tomsk Polytechnic University Competitiveness Enhancement Program grant, the Project number is VIU-IShNKB-77/2019.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Design of Acoustic Bifocal Lenses Using a Fourier-Based Algorithm

  • Fuster Escuder, José Miguel|||0000-0001-7778-8834
  • Candelas Valiente, Pilar|||0000-0002-9924-7673
  • Pérez-López, Sergio
[EN] In this work, we develop a new design method based on fast Fourier transform (FFT) for implementing zone plates (ZPs) with bifocal focusing profiles. We show that the FFT of the governing binary sequence provides a discrete sequence of the same length, which indicates the location of the main foci at the ZP focusing profile. Then, using reverse engineering and establishing a target focusing profile, we are capable of generating a binary sequence that provides a ZP with the desired focusing profile. We show that this design method, based on the inverse fast Fourier transform (IFFT), is very flexible and powerful and allows to tailor the design of bifocal ZPs to achieve focusing profiles with the desired foci locations and resolutions. The key advantage of our design algorithm, compared to other alternatives presented in previous works, is that our method provides bifocal focusing profiles with an absolute control of the foci locations. Moreover, although we analyze the performance of this novel design algorithm for underwater ultrasonics, it can also be successfully extended to different fields of physics, such as optics or microwaves, where ZPs are widely employed., This work has been supported by the Spanish MICINN RTI2018-100792-B-I00 project and Generalitat Valenciana AICO/2020/139 project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

M-Bonacci Zone Plates for Ultrasound Focusing

  • Pérez-López, Sergio
  • Fuster Escuder, José Miguel|||0000-0001-7778-8834
  • Candelas Valiente, Pilar|||0000-0002-9924-7673
[EN] In this work, we present a thorough analysis on M-bonacci zone plates for ultrasound focusing applications. These planar lenses are capable of providing bifocal focusing profiles with equal intensity in both foci and become very appealing for a wide range of scenarios including medical and industrial applications. We show that in high-wavelength domains, such as acoustics or microwaves, the separation between both foci can be finely adjusted at the expense of slightly increasing the distortion of the focusing profile, and we introduce a design parameter to deal with this issue and simplify the design process of these lenses. Experimental measurements are in good agreement with numerical simulations and demonstrate the potential of M-bonacci lenses in ultrasound focusing applications., This work has been supported by Spanish MICINN RTI2018-100792-B-I00 project. S.P.-L. acknowledges financial support from Universitat Politecnica de Valencia grant program PAID-01-18.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Tunable acoustic hooks from Janus cylinder

  • Castiñeira-Ibáñez, Sergio|||0000-0001-6414-3906
  • Tarrazó-Serrano, Daniel|||0000-0001-9986-0884
  • Uris Martínez, Antonio|||0000-0002-2005-2305
  • Rubio Michavila, Constanza|||0000-0002-4395-7473
[EN] In this paper we present a new way to obtain tunable acoustic hooks. The breaking of the symmetry of the material composition is used for the generation of acoustic hooks from Janus cylinders. This fact is possible by using sonic crystals to vary the refractive index of two half-cylinders. The study has been carried out numerically, using the Finite Element Method. By changing the contrast of refractive indexes between the two half-cylinders or by rotating the Janus cylinder, acoustic hooks can be obtained that can be tunable with bending angle ranging from 1 degrees to 21 degrees. Full Width at Half-Maximum can be obtained with values close to the diffraction limit. This structure provides an efficient method to precisely tune the acoustic hook depending on it use., This work has been supported by Spanish Ministry of Science, Innovation and Universities (grant No. RTI2018-100792-B-I00). D.T.-S. acknowledges financial support from Ministerio de Ciencia, Innovacion y Universidades de Espana through grant BES-2016-077133.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Transient Analysis of Fresnel Zone Plates for Ultrasound Focusing Applications

  • Pérez-López, Sergio
  • Dolmatov, Dimitry O.
  • Tarrazó-Serrano, Daniel|||0000-0001-9986-0884
  • Rubio Michavila, Constanza|||0000-0002-4395-7473
  • Candelas Valiente, Pilar|||0000-0002-9924-7673
[EN] Fresnel Zone Plates are planar lenses that can be used to focus ultrasound beams. This kind of acoustic lenses can play a key role in the resolution of ultrasonic NDT systems. In this type of pulse-echo applications, the pulse duration is an important parameter that specifies the axial resolution, and thus, shorter ultrasound pulses provide higher resolutions. However, acoustic lenses exhibit a transient response that should be considered when setting the pulse duration, as pulses shorter than the transient state duration result in degradation in the response of acoustic lenses in terms of focal intensity, focal displacement, and lateral and axial resolutions. In this work, a thorough analysis of the transient response of Fresnel Zone Plates is discussed, demonstrating that the transient state should be considered in order to achieve optimal focusing performance. Theoretical and numerical results are presented, showing very good agreement., This work has been supported by Spanish MICINN RTI2018-100792-B-I00 project, Generalitat Valenciana AICO/2020/139 and the Russian Governmental program "Science" project FSWW-2020-0014. The research is carried out within the framework of Tomsk Polytechnic University Competitiveness Enhancement Program grant VIU-MNOL NK 187/2020. S.P.-L. acknowledges financial support from Universitat Politècnica de València grant program PAID-01-18. D.T.-S. acknowledges financial support from MICINN BES-2016-07713 project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Ultrasonic focusing with mesoscale polymer cuboid

  • Tarrazó-Serrano, Daniel|||0000-0001-9986-0884
  • Rubio Michavila, Constanza|||0000-0002-4395-7473
  • Uris Martínez, Antonio|||0000-0002-2005-2305
  • Minin, Oleg V.
  • Minin, Igor V.
[EN] In this paper, we demonstrate that, contrary to what the Geometrical Optics laws dictate, a flat polymer mesoscale cuboid immersed in water with no need of negative refraction can focus sound. Two main polymers were considered and lens parameters compared: PMMA and Rexolite®. It was concluded that Rexolite® is preferable for acoustic jet formation. The nature of the formation of the foci along the longitudinal axis, that is to say along the wave propagation axis, is numerically and experimentally demonstrated. In addition, the conditions under which a cubic particles lens of this type forms a single localized region with a sub-diffraction transverse size (approximately 0.44 wavelength) are determined. The comparisons of the acoustic wave pressures and the focal distance between the Finite Element Method based numerical results and the experimental results show fair agreement., This work has been supported by Spanish Ministry of Science, Innovation and Universities (grant No. RTI2018-100792-B-I00). The research was partially supported by Tomsk Polytechnic University Competitiveness Enhancement Program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analysis of Predistortion Techniques on Fresnel Zone Plates in Ultrasound Applications

  • Fuster Escuder, José Miguel|||0000-0001-7778-8834
  • Belmar Ibáñez, Francisco|||0000-0003-4412-0007
  • Candelas Valiente, Pilar|||0000-0002-9924-7673
  • Pérez-López, Sergio
[EN] In this work, we analyze the effect of predistortion techniques on the focusing profile of Fresnel Zone Plates (FZPs) in ultrasound applications. This novel predistortion method is based on either increasing or decreasing the width of some of the FZP Fresnel rings by a certain amount. We investigate how the magnitude of the predistortion, as well as the number and location of the predistorted rings, influences the lens focusing profile. This focusing profile can be affected in different ways depending on the area of the lens where the predistortion is applied. It is shown that when the inner area of the lens, closer to its center, is predistorted, this technique allows the control of the focal depth at the main focus. However, when the predistortion is applied to an area farther from the center of the lens, the acoustic intensity distribution among the main focus and the closest adjacent secondary foci can be tailored at a certain degree. This predistortion technique shows great potential and can be used to control, modify and shape the FZP focusing profile in both industrial and therapeutic applications., This work has been supported by Spanish MICINN RTI2018-100792-B-I00 project and Generalitat Valenciana AICO/2020/139 project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Acoustical hooks: A new subwavelength self-bending beam

  • Rubio Michavila, Constanza|||0000-0002-4395-7473
  • Tarrazó-Serrano, Daniel|||0000-0001-9986-0884
  • Uris Martínez, Antonio|||0000-0002-2005-2305
  • Minin, Oleg V.
  • Minin, Igor V.
[EN] In this work, we report the first experimental observation of a new type of near-field curved acoustic beam confirmed by simulations. This new curved acoustical beam is generated by asymmetric distribution of the vortices in a polymer Janus particle (particle with broken symmetry) immersed in water. The origin of the vortices is in the conversion of an incident longitudinal wave mode to a shear wave in a solid and then back to a longitudinal wave in the water and has unique features, the radius of curvature of acoustical hook is less than the wavelength. Indeed, it is the smallest radius of curvature ever recorded for any acoustical beams. These results may be potentially useful when an object, located in the path of the beam, must be avoided. It could also have potential applications in particle manipulations., This work has been supported by Spanish Ministry of Science, Innovation and Universities (grant No. RTI2018-100792-B-I00). The research was partially supported by the Russian Foundation for Basic Research (Grant No. 20-57-S52001) and by Tomsk Polytechnic University Competitiveness Enhancement Program. D.T.-S. acknowledges financial support from MICINN BES-2016-07713 project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Design of Acoustic Lenses for Ultrasound Focusing Applications

  • Pérez López, Sergio
[ES] La focalización de ultrasonidos tiene muchas aplicaciones en una gran variedad de áreas tanto científicas como industriales. Los ultrasonidos focalizados son una de las herramientas principales usada por médicos en todo el mundo para obtener imágenes biomédicas de diferentes tipos de tejidos y órganos de manera no invasiva. En las últimas décadas, el uso de ultrasonidos focalizados de alta intensidad (HIFU, por sus siglas en inglés) ha surgido como una de las técnicas principales para el tratamiento de cáncer mediante la ablación térmica de tumores de manera no invasiva. Además, los ultrasonidos focalizados están emergiendo en los últimos años como uno de los métodos más prometedores para el tratamiento de las enfermedades cerebrales, con la aparición de nuevas técnicas disruptivas como la apertura reversible de la barrera hematoencefálica o la neuromodulación. En entornos industriales, los ultrasonidos son ampliamente utilizados como uno de los métodos principales para la evaluación no destructiva de materiales y estructuras, debido a que las ondas acústicas pueden penetrar en los objetos a distancias donde la luz no puede debido a la elevada absorción y dispersión. En este sentido, diseñar estructuras capaces de focalizar ultrasonidos es de una gran relevancia tanto para la comunidad científica como para los sectores médicos e industriales. Esta tesis presenta nuevos diseños de lentes acústicas capaces de controlar los parámetros principales del haz de ultrasonidos focalizados, proporcionando diferentes tipos de perfiles de focalización adecuados para una gran variedad de aplicaciones y escenarios. En particular, se han diseñado y adaptado al campo de los ultrasonidos las lentes de Fresnel (Fresnel Zone Plates, FZPs), ampliamente utilizadas en el campo de la óptica. Se ha presentado una nueva técnica de modulación espacio-temporal capaz de controlar la posición del foco de ultrasonidos tanto en espacio como en tiempo, aumentando así la versatilidad de este tipo de dispositivos. También se ha demostrado el funcionamiento en el campo de la acústica de nuevos diseños basados en aplicar secuencias binarias a una lente de Fresnel convencional, como las secuencias fractales de Cantor o las secuencias de M-bonacci generalizadas, capaces de modificar las propiedades de focalización de las lentes, incluyendo el número, posición y forma de los focos acústicos. Además, se introduce un nuevo diseño de lentes esféricas rellenas de líquido capaces de generar jets ultrasónicos, con mucho potencial en aplicaciones de imagen de alta resolución en campo cercano. Se ha demostrado que, cambiando el líquido interno de la lente o ajustando el ratio de mezcla entre dos líquidos, se pueden controlar los parámetros principales del jet. Los diseños propuestos en la tesis han sido validados tanto empleando simulaciones numéricas como realizando medidas experimentales, allanando el camino para el uso de este tipo de estructuras en aplicaciones de focalización de ultrasonidos., [CA] La focalització d'ultrasons té moltes aplicacions en moltes àrees científiques i industrials. Els ultrasons focalitzats són una de les eines principals utilitzada per metges a tot el món per obtenir imatges biomèdiques de diferents tipus de teixits i òrgans de manera no invasiva. En les últimes dècades, els ultrasons focalitzats d'alta intensitat (HIFU, per les seues sigles en anglès) han aparegut com una de les tècniques principals per al tractament de càncer mitjançant l'ablació de tumors de manera no invasiva. A més, els ultrasons focalitzats estan emergint en els últims anys com un dels mètodes més prometedors per al tractament de les malalties cerebrals, amb l'aparició de noves tècniques disruptives com l'obertura reversible de la barrera hematoencefàlica o la neuromodulació. En entorns industrials, els ultrasons són àmpliament utilitzats com un dels mètodes principals per a l'avaluació no destructiva de materials i estructures, pel fet que les ones acústiques poden penetrar en els objectes a distàncies on la llum no pot a causa de l'elevada absorció i dispersió. En aquest sentit, dissenyar estructures capaces de focalitzar ultrasons és d'una gran rellevància tant per a la comunitat científica com per als sectors mèdics i industrials. Aquesta tesi presenta nous dissenys de lents acústiques capaços de controlar els paràmetres principals del feix d'ultrasons focalitzats, proporcionant diferents tipus de perfils de focalització adequats per a una gran varietat d'aplicacions i escenaris. En particular, s'han dissenyat i adaptat al camp dels ultrasons les lents de Fresnel (Fresnel Zone Plates, FZPs), àmpliament utilitzades en el camp de l'òptica. S'ha presentat una nova tècnica de modulació espai-temporal capaç de controlar la posició del focus d'ultrasons tant en espai com en temps, augmentant així la versatilitat d'aquest tipus de dispositius. També s'ha demostrat el funcionament en el camp de l'acústica de nous dissenys basats en aplicar seqüències binàries a una lent de Fresnel convencional, com les seqüències fractals de Cantor o les seqüències de M-bonacci generalitzades, capaces de modificar les propietats de focalització de les lents, incloent el nombre, posició i forma dels focus acústics. A més, s'introdueix un nou disseny de lents esfèriques plenes de líquid capaces de generar jets ultrasònics, amb molt potencial en aplicacions d'imatge d'alta resolució en camp proper. S'ha demostrat que, canviant el líquid intern de la lent o ajustant la ràtio de barreja entre dos líquids, es poden controlar els paràmetres principals del jet. Els dissenys proposats en la tesi han estat validats tant emprant simulacions numèriques com realitzant mesures experimentals, aplanant el camí per a l'ús d'aquest tipus d'estructures en aplicacions de focalització d'ultrasons., [EN] Ultrasound focusing has many applications in a wide range of fields. Focused ultrasound is one of the main tools used by doctors all over the world to obtain biomedical images of different kind of tissues non-invasively. In the past decades, high intensity focused ultrasound (HIFU) appeared as one of the fundamental techniques for cancer treatment through non-invasive thermal tumor ablation. In addition, focused ultrasonic waves are recently emerging as one of the main tools to treat brain diseases, with novel disruptive techniques such as blood-brain barrier opening or neuromodulation. In industrial environments, ultrasonic waves are widely employed as one of the primary methods for the non-destructive evaluation (NDE) of materials and structures, as acoustic waves are able to penetrate deep into objects otherwise opaque using optical techniques. In this sense, designing structures capable of focusing ultrasonic waves is of great interest and relevance for the scientific, the industrial, and the biomedical sectors. This thesis devises new designs of acoustic lenses capable of controlling the main parameters of the focused ultrasound beam, achieving different kinds of focusing profiles suitable for a wide variety of scenarios. In particular, Fresnel Zone Plates (FZPs), commonly used in optics, are designed and adapted to the ultrasound domain. A novel spatio-temporal modulation technique capable of controlling the ultrasound focus location in both time and space is presented, increasing the versatility of this kind of devices. New design techniques based on applying a binary sequence to FZPs are also demonstrated, such as Cantor fractal sequences or generalized M-bonacci sequences, which modify the focusing properties of the lens, including the number, location, and shape of the different acoustic foci. In addition, acoustic jets generated by liquid-filled spherical lenses are devised for near-field high resolution imaging, demonstrating their applicability in the ultrasound domain. It is demonstrated that, by changing the inner liquid of the spherical lens or by tuning the mixing ratio between two liquids, the main focal parameters of the ultrasonic jet can be accurately controlled. The proposed designs are validated using both numerical simulations and experimental measurements, paving the way for the use of these kind of structures in focused ultrasound applications., This work would not have been possible without the following funding sources: PAID-01-18 personal FPI grant from Universitat Politècnica de València; Spanish government MINECO TEC2015-70939-R project; Spanish government MICINN RTI2018-100792-B-I00 project; Generalitat Valenciana AICO/2020/139 project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Liquid-liquid core-shell configurable mesoscale spherical acoustic lens with subwavelength focusing

  • Pérez-López, Sergio
  • Minin, Oleg V.
  • Minin, Igor V.
  • Candelas Valiente, Pilar|||0000-0002-9924-7673
  • Fuster Escuder, José Miguel|||0000-0001-7778-8834
  • Rubio Michavila, Constanza|||0000-0002-4395-7473
[EN] In this work, we present a lens based on a thin hollow ABS spherical container structure, which can be filled up with different compatible liquids. The acoustic jet can be dynamically shaped by either shifting the operating frequency or modifying the geometry of the lens. We show for the first time that a spherical Ethanol ABS core¿shell acoustical lens immersed in water with low diameter-to-wavelength ratio equal to 6.67 and refraction index of 1.24 achieves a focusing spot narrower than 0.85¿. Experimental measurements validate simulation results and demonstrate the viability of these configurable spherical lenses in underwater acoustic focusing applications., This work has been supported by Spanish MINECO TEC2015-70939-R and MICINN RTI2018-100792-B-I00 projects. S.P.-L. acknowledges financial support from Universitat Politècnica de València grant program PAID-01-18. I.V.M. and O.V.M. acknowledge the Tomsk Polytechnic University Competitiveness Enhancement Program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Cylindrical 3D printed confgurable ultrasonic lens for subwavelength focusing enhancement

  • Castiñeira-Ibáñez, Sergio|||0000-0001-6414-3906
  • Tarrazó-Serrano, Daniel|||0000-0001-9986-0884
  • Uris Martínez, Antonio|||0000-0002-2005-2305
  • Rubio Michavila, Constanza|||0000-0002-4395-7473
  • Minin, Oleg V.
  • Minin, Igor V.
[EN] In this study, we report the characteristics of acoustic jets obtained through a mesoscale (radius less than 5 wavelengths) ABS cylinder made with a 3D printer. We have analyzed the influence of cylinder size on the characteristic parameters of an acoustic jet, such as maximum acoustic intensity at focus, Full Width at Half Maximum and length of Acoustic Jet. FWHM below 0.5 wavelength in AJ was experimentally obtained. It has been observed that there are two operating regimes depending on the cylinder radius: the resonant and the non-resonant. In the resonant regime, the excitation of Whispering Gallery Modes results in optimal parameter values of the acoustic jet. However, as it is a resonant regime, any minimal variation in cylinder size, working frequency or refractive index would make resonance disappear. In non-resonant mode, a phononic crystal has been embedded inside the cylinder and the characteristic parameters of the acoustic jet have been studied. These have been observed to improve. Finally, we have shown that curved acoustic jets can be obtained with the ABS cylinder with a phononic crystal embedded inside., This work has been supported by Spanish Ministry of Science, Innovation and Universities (Grant No. RTI2018100792-B-I00). The research was partially supported by Tomsk Polytechnic University Competitiveness Enhancement Program. D. T.-S. acknowledges financial support from Ministerio de Ciencia, Innovacion y Universidades de Espana through Grant BES-2016-077133.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Phase Method for Visualization of Hidden Dielectric Objects in the MillimeterWaveband

  • Minin, Igor V.
  • Minin, Oleg V.
  • Castiñeira-Ibáñez, Sergio|||0000-0001-6414-3906
  • Rubio Michavila, Constanza|||0000-0002-4395-7473
  • Candelas Valiente, Pilar|||0000-0002-9924-7673
[EN] A method of detecting dielectric objects hidden behind an opaque barrier located on a reflective background, based on the distortion of interference fringes, is proposed in this article. Experiments conducted in the millimeter wavelength range demonstrated the effectiveness of the method under consideration, which does not require a holographic image reconstruction. Such a system can be classified as contour imaging., This research was funded by Ministerio de Economía y Competitividad (MINECO), grant number RTI 2018-I00792-B-100
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Application of Phase-Reversal Fresnel Zone Plates for High-Resolution Robotic Ultrasonic Non-Destructive Evaluation

  • Dolmatov, Dmitry O.
  • Filippov, German A.
  • Sednev, Dmitry A.
  • Tarrazó-Serrano, Daniel|||0000-0001-9986-0884
  • Uris Martínez, Antonio|||0000-0002-2005-2305
[EN] Nowadays the development of automated inspection systems based on six degrees of freedom robotic manipulators is a highly relevant topic in ultrasonic non-destructive testing. One of the issues associated with such development is the problem of acquiring high-resolution results. In this article, the application Phase-Reversal Fresnel Zone Plates is considered for solving this problem. Such acoustic lenses can solve the task of high-resolution results acquisition by using a single unfocused transducer. Furthermore, Phase-Reversal Fresnel Zone Plates can provide the desired focusing depth with the fixed thickness of the coupling layer. It is important in the case of application of devices which provide localized coupling. In this paper a proper design of Phase-Reversal Fresnel Zone Plate was determined according to the conditions of planned experiments. Its efficiency was verified via the Finite Element Method modeling. In all performed experiments the relative error of flaws size estimation did not exceed 6% whereas the signal-to-noise ratio was not lower than 17.1 dB. Thus, experimental results demonstrate that the application of Phase-Reversal Fresnel Zone Plates allowed to obtain results with high lateral resolution and signal-to-noise ratio. These results demonstrate the reasonability of the development of devices that provide localized coupling and use Phase-Reversal Fresnel Zone Plates., This work has been supported by Spanish Ministry of Science, Innovation and Universities (grant No. RTI2018-100792-B-I00) and Generalitat Valenciana AICO/2020/139 project. The study has been performed under the financial support by the Russian Ministry of Science and Higher Education within the State Task Research (basic fundamental) project # FSWW-2020-0014.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On the focusing enhancement of Soret zone plates with ultrasound directional transducers

  • Pérez-López, Sergio
  • Fuster Escuder, José Miguel|||0000-0001-7778-8834
  • Candelas Valiente, Pilar|||0000-0002-9924-7673
  • Rubio Michavila, Constanza|||0000-0002-4395-7473
[EN] This work analyzes the influence of the distribution of transparent Fresnel regions over the focusing profile of Soret Zone Plates. It is shown that this effect becomes very significant in those fields where directional transducers are employed, such as microwaves or acoustics. A thorough analysis on both the lens transmission efficiency and the focusing enhancement factor is presented. Moreover, experimental measurements are also carried out, validating the theoretical model and demonstrating that the distribution of transparent Fresnel regions becomes a critical parameter in applications requiring directional emitters., This work was supported by Spanish MINECO TEC2015-70939-R and MICINN RTI2018-100792-B-I00 projects. S.P.-L. acknowledges financial support from Universitat Politecnica de Valencia Grant Program No. PAID-01-18.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Reference radius in Fresnel Zone Plates to control ultrasound beamforming

  • Rubio Michavila, Constanza|||0000-0002-4395-7473
  • Tarrazó-Serrano, Daniel|||0000-0001-9986-0884
  • Castiñeira-Ibáñez, Sergio|||0000-0001-6414-3906
  • Candelas Valiente, Pilar|||0000-0002-9924-7673
  • Minin, Oleg V.
  • Minin, Igor V.
Fresnel Zone Plate lenses present a high capacity to generate focus spot. In acoustics, these ultrasound lenses can be used in both HIFU and imaging systems. One of the limitations of classical Fresnel Zone Plates is the difficulty to control either the lateral lobes or the length of the focus. These focal geometric parameters are directly related to lateral resolution and depth of focus, respectively. In this work, we study the introduction of a new free parameter in the design of Fresnel lenses called reference radius/reference phase [1-2], which in some cases is equivalent to the introduction of a pupil mask in the lens. The ultrasound beamforming can be manipulated by means of this free parameter. The election of the appropriate value for the reference radius allows the lateral resolution improvement by reducing the lateral lobes or the expansion of the focus. This last effect is achieved through the generation of quasi-Bessel beams due to transformation of spherical waves into quasi-conic waves by means of apodization of the central part of the lens [3-5]. Therefore, the characteristics of the focus can be modified without changing the topology of the lens by using a pupil mask., This work has been supported by Spanish MICINN (RTI2018-100792-B-I00) and was partially supported by Tomsk Polytechnic University Competitiveness Enhancement Program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fractal lenses based on Cantor binary sequences for ultrasound focusing applications

  • Pérez-López, Sergio
  • Fuster Escuder, José Miguel|||0000-0001-7778-8834
  • Candelas Valiente, Pilar|||0000-0002-9924-7673
  • Rubio Michavila, Constanza|||0000-0002-4395-7473
[EN] In this work, we demonstrate the application of Cantor fractal lenses in acoustics. The Cantor Zone Plate (CZP), previously introduced in optics, is designed from a conventional Fresnel Zone Plate (FZP) using a binary sequence governed by the distribution of a generalized Cantor set. The CZP maintains its main focus at the same focal distance than its associated FZP, providing a softer multi-foci focusing profile which is very useful in certain ultrasound therapeutic applications. Experimental measurements are in good agreement with the theoretical model, demonstrating that CZPs are suitable for the ultrasound field., This work has been supported by Spanish MINECO (TEC2015-70939-R), MICINN (RTI2018-100792-B-I00) and by Universitat Politecnica de Valencia research grant program PAID-01-18.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

3D sound wave focusing by 2D internal periodic structure of 3D external cuboid shape

  • Castiñeira-Ibáñez, Sergio|||0000-0001-6414-3906
  • Candelas Valiente, Pilar|||0000-0002-9924-7673
  • Rubio Michavila, Constanza|||0000-0002-4395-7473
  • Tarrazó-Serrano, Daniel
  • Minin, Oleg V.
  • Minin, Igor V.
[EN] In this work, we report the focusing effect of a 2D sonic crystal cuboid. The proposed sonic composite lens is vertically extended from a 2-D flat Phononic Crystal Structure, but it is found to be able to focus waves in a three-dimensional manner. By varying the cuboid size, beam dimensions change and transverse beam width values smaller than the classical diffraction limit (~0.3 of wavelength) can be obtained. Numerical results have been obtained by Finite Element Method., This work has been supported by RTI2018-100792-B-I00 (MICINN) and was partially carried out within the framework of the Tomsk Polytechnic University Competitiveness Enhancement Program. D. T.-S. acknowledges financial support from Ministerio de Ciencia, Innovación y Universidades de España through grant BES-2016-077133.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Spatio-temporal ultrasound beam modulation to sequentially achieve multiple foci with a single planar monofocal lens

  • Pérez-López, Sergio
  • Fuster Escuder, José Miguel|||0000-0001-7778-8834
  • Candelas Valiente, Pilar|||0000-0002-9924-7673
[EN] Ultrasound focusing is a hot topic due to its multiple applications in many fields, including biomedical imaging, thermal ablation of cancerous tissues, and non destructive testing in industrial environments. In such applications, the ability to control the focal distance of the ultrasound device in real-time is a key advantage over conventional devices with fixed focal parameters. Here, we present a method to achieve multiple time-modulated ultrasound foci using a single planar monofocal Fresnel Zone Plate. The method takes advantage of the focal distance linear dependence on the operating frequency of this kind of lenses to design a sequence of contiguous modulated rectangular pulses that achieve different focal distances and intensities as a function of time. Both numerical simulations and experimental results are presented, demonstrating the feasibility and potential of this technique., This work has been supported by Spanish MICINN project number RTI2018-100792-B-I00 and Generalitat Valenciana project AICO/2020/139. S.P.-L. acknowledges financial support from Universitat Politecnica de Valencia Grant program PAID-01-18.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Tunable subwavelength ultrasound focusing in mesoscale spherical lenses using liquid mixtures

  • Pérez-López, Sergio
  • Minin, Igor V.
  • Minin, Oleg V.
  • Fuster Escuder, José Miguel|||0000-0001-7778-8834
  • Candelas Valiente, Pilar|||0000-0002-9924-7673
[EN] In this work, we present a configurable spherical lens for underwater focusing applications, which consists on a hollow ABS container filled with a liquid mixture. Two miscible liquids with different sound speeds are required to implement this novel configurable lens. We show that by adjusting the mixing ratio between the volumes of both liquids, the sound speed of the liquid mixture can be accurately selected. This results in a modification of the acoustic jet properties and a continuous tuning on the lens focal length. This procedure can be fully automatized providing a dynamic control mechanism that can shift the lens focal length to any desired value inside a continuous range in both directions. Depending on the acoustic properties of the selected liquids, subwavelength resolution or even beyond the diffraction limit resolution can be achieved. We provide experimental measurements for ethanol-water mixtures achieving subwavelength resolution for a certain focal length ranging between 34.6 and 42.8 mm., This work has been supported by Spanish MINECO TEC2015-70939-R and MICINN RTI2018-100792-B-I00 projects. S.P.-L. acknowledges financial support from Universitat Politecnica de Valencia grant program PAID01-18. I.V.M. and O.V.M. acknowledge support from the Tomsk Polytechnic University Enhancement Program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Bifocal Ultrasound Focusing Using Bi-Fresnel Zone Plate Lenses

  • Pérez-López, Sergio
  • Fuster Escuder, José Miguel|||0000-0001-7778-8834
  • Candelas Valiente, Pilar|||0000-0002-9924-7673
  • Tarrazó-Serrano, Daniel|||0000-0001-9986-0884
  • Castiñeira-Ibáñez, Sergio|||0000-0001-6414-3906
  • Rubio Michavila, Constanza|||0000-0002-4395-7473
[EN] In this work, we present a bifocal Fresnel zone plate (BiFZP) capable of generating focusing profiles with two different foci. The performance of the BiFZP is demonstrated in the ultrasound domain, with a very good agreement between the experimental measurements and the finite element method (FEM) simulations. This lens becomes an appealing alternative to other dual-focusing lenses,in which the foci location can only be set at a limited range of positions, such as M-bonacci zone plates. Moreover, the variation of the operating frequency has also been analyzed, providing an additional dynamic control parameter in this type of lenses., This work was supported by the Spanish MICINN RTI2018-100792-B-I00 project. S.P.-L. acknowledges financial support from the Universitat Politècnica de València grant program PAID-01-18. D.T.-S. acknowledges financial support from the MICINN BES-2016-07713 project.